ETSI ES 203 811-2 V1.1.1 (2022-07)

Integrated broadband cable telecommunication networks (CABLE); Sixth generation transmission systems for interactive cable television services - IP cable modem; Part 2: Physical layer; DOCSIS® 4.0 [ANSI/SCTE 262-1 2020]

DES/CABLE-0029-2

Integrirana širokopasovna kabelska telekomunikacijska omrežja (CABLE) - Šesta generacija prenosnih sistemov za storitve interaktivne kabelske televizije - IP-kabelski modemi - 2. del: Fizična plast - DOCSIS® 4.0 [ANSI/SCTE 262-1 2020]

General Information

• Status: Not Published
• Technical Committee: CABLE WG1 - Architecture, Interfaces, protocols
• Current Stage: 10 - Start of Membership Vote
• Due Date: 25-Jul-2022
• Completion Date: 25-Jul-2022
• Ref Project: kSIST FprES 203 811-2 V1.1.1:2022 - Integrated broadband cable telecommunication networks (CABLE) - Sixth generation transmission systems for interactive cable television services - IP cable modem - Part 2: Physical layer - DOCSIS® 4.0 [ANSI/SCTE 262-1 2020]

Standards Content (sample)

Final draft ETSI ES 203 811-2 V1.1.1 (2022-07)
ETSI STANDARD
Integrated broadband cable
telecommunication networks (CABLE);
Sixth generation transmission systems for interactive cable
television services - IP cable modem;
Part 2: Physical layer; DOCSIS 4.0
[ANSI/SCTE 262-1 2020]
---------------------- Page: 1 ----------------------
[ANSI/SCTE 262-1 2020] 2 Final draft ETSI ES 203 811-2 V1.1.1 (2022-07)
Reference
DES/CABLE-0029-2
Keywords
access, broadband, CABLE, DOCSIS,
endorsement, IP, IPCable
ETSI
650 Route des Lucioles
F-06921 Sophia Antipolis Cedex - FRANCE
Tel.: [phone] Fax: [phone]
Siret N° 348 623 562 00017 - APE 7112B
Association à but non lucratif enregistrée à la
Sous-Préfecture de Grasse (06) N° w061004871
Important notice
The present document can be downloaded from:
http://www.etsi.org/standards-search

The present document may be made available in electronic versions and/or in print. The content of any electronic and/or

print versions of the present document shall not be modified without the prior written authorization of ETSI. In case of any

existing or perceived difference in contents between such versions and/or in print, the prevailing version of an ETSI

deliverable is the one made publicly available in PDF format at www.etsi.org/deliver.

Users of the present document should be aware that the document may be subject to revision or change of status.

Information on the current status of this and other ETSI documents is available at

https://portal.etsi.org/TB/ETSIDeliverableStatus.aspx

If you find errors in the present document, please send your comment to one of the following services:

https://portal.etsi.org/People/CommiteeSupportStaff.aspx

If you find a security vulnerability in the present document, please report it through our

Coordinated Vulnerability Disclosure Program:
https://www.etsi.org/standards/coordinated-vulnerability-disclosure
Notice of disclaimer & limitation of liability

The information provided in the present deliverable is directed solely to professionals who have the appropriate degree of

experience to understand and interpret its content in accordance with generally accepted engineering or

other professional standard and applicable regulations.

No recommendation as to products and services or vendors is made or should be implied.

No representation or warranty is made that this deliverable is technically accurate or sufficient or conforms to any law

rule and/or regulation and further, no representation or warranty is made of merchantability or fitness

and/or governmental

for any particular purpose or against infringement of intellectual property rights.

In no event shall ETSI be held liable for loss of profits or any other incidental or consequential damages.

Any software contained in this deliverable is provided "AS IS" with no warranties, express or implied, including but not

limited to, the warranties of merchantability, fitness for a particular purpose and non-infringement of intellectual property

rights and ETSI shall not be held liable in any event for any damages whatsoever (including, without limitation, damages

for loss of profits, business interruption, loss of information, or any other pecuniary loss) arising out of or related to the use

of or inability to use the software.
Copyright Notification

No part may be reproduced or utilized in any form or by any means, electronic or mechanical, including photocopying and

microfilm except as authorized by written permission of ETSI.

The content of the PDF version shall not be modified without the written authorization of ETSI.

The copyright and the foregoing restriction extend to reproduction in all media.
© ETSI 2022.
All rights reserved.
ETSI
---------------------- Page: 2 ----------------------
[ANSI/SCTE 262-1 2020] 3 Final draft ETSI ES 203 811-2 V1.1.1 (2022-07)
Contents

Intellectual Property Rights ................................................................................................................................ 4

Foreword ............................................................................................................................................................. 4

Modal verbs terminology .................................................................................................................................... 4

1 Scope ........................................................................................................................................................ 5

2 References ................................................................................................................................................ 5

2.1 Normative references ......................................................................................................................................... 5

2.2 Informative references ........................................................................................................................................ 6

3 Definition of terms, symbols and abbreviations ....................................................................................... 7

3.1 Terms .................................................................................................................................................................. 7

3.2 Symbols .............................................................................................................................................................. 7

3.3 Abbreviations ..................................................................................................................................................... 7

Endorsement notice ............................................................................................................................................ 7

History ................................................................................................................................................................ 8

ETSI
---------------------- Page: 3 ----------------------
[ANSI/SCTE 262-1 2020] 4 Final draft ETSI ES 203 811-2 V1.1.1 (2022-07)
Intellectual Property Rights
Essential patents

IPRs essential or potentially essential to normative deliverables may have been declared to ETSI. The declarations

pertaining to these essential IPRs, if any, are publicly available for ETSI members and non-members, and can be

found in ETSI SR 000 314: "Intellectual Property Rights (IPRs); Essential, or potentially Essential, IPRs notified to

ETSI in respect of ETSI standards", which is available from the ETSI Secretariat. Latest updates are available on the

ETSI Web server (https://ipr.etsi.org/).

Pursuant to the ETSI Directives including the ETSI IPR Policy, no investigation regarding the essentiality of IPRs,

including IPR searches, has been carried out by ETSI. No guarantee can be given as to the existence of other IPRs not

referenced in ETSI SR 000 314 (or the updates on the ETSI Web server) which are, or may be, or may become,

essential to the present document.
Trademarks

The present document may include trademarks and/or tradenames which are asserted and/or registered by their owners.

ETSI claims no ownership of these except for any which are indicated as being the property of ETSI, and conveys no

right to use or reproduce any trademark and/or tradename. Mention of those trademarks in the present document does

not constitute an endorsement by ETSI of products, services or organizations associated with those trademarks.

DECT™, PLUGTESTS™, UMTS™ and the ETSI logo are trademarks of ETSI registered for the benefit of its

Members. 3GPP™ and LTE™ are trademarks of ETSI registered for the benefit of its Members and of the 3GPP

Organizational Partners. oneM2M™ logo is a trademark of ETSI registered for the benefit of its Members and of the

oneM2M Partners. GSM and the GSM logo are trademarks registered and owned by the GSM Association.

Foreword

This final draft ETSI Standard (ES) has been produced by ETSI Technical Committee Integrated broadband cable

telecommunication networks (CABLE), and is now submitted for the ETSI standards Membership Approval Procedure.

The present document is part 2 of a multi-part deliverable. Full details of the entire series can be found in part 1 [2].

DOCSIS is a registered trade mark of Cable Television Laboratories, Inc., and is used in the present document with

permission.
Modal verbs terminology

In the present document "shall", "shall not", "should", "should not", "may", "need not", "will", "will not", "can" and

"cannot" are to be interpreted as described in clause 3.2 of the ETSI Drafting Rules (Verbal forms for the expression of

provisions).

"must" and "must not" are NOT allowed in ETSI deliverables except when used in direct citation.

ETSI
---------------------- Page: 4 ----------------------
...