oSIST prEN ISO 787-2:2021
(Main)General methods of test for pigments and extenders - Part 2: Determination of matter volatile at 105 degrees C (ISO/DIS 787-2:2021)
General methods of test for pigments and extenders - Part 2: Determination of matter volatile at 105 degrees C (ISO/DIS 787-2:2021)
Allgemeine Prüfverfahren für Pigmente und Füllstoffe - Teil 2: Bestimmung der bei 105 °C flüchtigen Anteile (ISO/DIS 787-2:2021)
Méthodes générales d'essai des pigments et matières de charge - Partie 2: Détermination des matières volatiles à 105 degrés C (ISO/DIS 787-2:2021)
Splošne preskusne metode za pigmente in polnila - 2. del: Določevanje snovi, hlapnih pri 105 °C (ISO/DIS 787-2:2021)
General Information
RELATIONS
Standards Content (sample)
SLOVENSKI STANDARD
oSIST prEN ISO 787-2:2021
01-marec-2021
Splošne preskusne metode za pigmente in polnila - 2. del: Določevanje snovi,
hlapnih pri 105 °C (ISO/DIS 787-2:2021)
General methods of test for pigments and extenders - Part 2: Determination of matter
volatile at 105 degrees C (ISO/DIS 787-2:2021)Allgemeine Prüfverfahren für Pigmente und Füllstoffe - Teil 2: Bestimmung der bei 105
°C flüchtigen Anteile (ISO/DIS 787-2:2021)Méthodes générales d'essai des pigments et matières de charge - Partie 2:
Détermination des matières volatiles à 105 degrés C (ISO/DIS 787-2:2021)
Ta slovenski standard je istoveten z: prEN ISO 787-2
ICS:
87.060.10 Pigmenti in polnila Pigments and extenders
oSIST prEN ISO 787-2:2021 en,fr,de
2003-01.Slovenski inštitut za standardizacijo. Razmnoževanje celote ali delov tega standarda ni dovoljeno.
---------------------- Page: 1 ----------------------oSIST prEN ISO 787-2:2021
---------------------- Page: 2 ----------------------
oSIST prEN ISO 787-2:2021
DRAFT INTERNATIONAL STANDARD
ISO/DIS 787-2
ISO/TC 256 Secretariat: DIN
Voting begins on: Voting terminates on:
2021-01-27 2021-04-21
General methods of test for pigments and extenders —
Part 2:
Determination of matter volatile at 105 °C
ICS: 87.060.10
THIS DOCUMENT IS A DRAFT CIRCULATED
This document is circulated as received from the committee secretariat.
FOR COMMENT AND APPROVAL. IT IS
THEREFORE SUBJECT TO CHANGE AND MAY
NOT BE REFERRED TO AS AN INTERNATIONAL
STANDARD UNTIL PUBLISHED AS SUCH.
IN ADDITION TO THEIR EVALUATION AS
ISO/CEN PARALLEL PROCESSING
BEING ACCEPTABLE FOR INDUSTRIAL,
TECHNOLOGICAL, COMMERCIAL AND
USER PURPOSES, DRAFT INTERNATIONAL
STANDARDS MAY ON OCCASION HAVE TO
BE CONSIDERED IN THE LIGHT OF THEIR
POTENTIAL TO BECOME STANDARDS TO
WHICH REFERENCE MAY BE MADE IN
Reference number
NATIONAL REGULATIONS.
ISO/DIS 787-2:2021(E)
RECIPIENTS OF THIS DRAFT ARE INVITED
TO SUBMIT, WITH THEIR COMMENTS,
NOTIFICATION OF ANY RELEVANT PATENT
RIGHTS OF WHICH THEY ARE AWARE AND TO
PROVIDE SUPPORTING DOCUMENTATION. ISO 2021
---------------------- Page: 3 ----------------------
oSIST prEN ISO 787-2:2021
ISO/DIS 787-2:2021(E)
COPYRIGHT PROTECTED DOCUMENT
© ISO 2021
All rights reserved. Unless otherwise specified, or required in the context of its implementation, no part of this publication may
be reproduced or utilized otherwise in any form or by any means, electronic or mechanical, including photocopying, or posting
on the internet or an intranet, without prior written permission. Permission can be requested from either ISO at the address
below or ISO’s member body in the country of the requester.ISO copyright office
CP 401 • Ch. de Blandonnet 8
CH-1214 Vernier, Geneva
Phone: +41 22 749 01 11
Email: copyright@iso.org
Website: www.iso.org
Published in Switzerland
ii © ISO 2021 – All rights reserved
---------------------- Page: 4 ----------------------
oSIST prEN ISO 787-2:2021
ISO/DIS 787-2:2021(E)
Contents Page
Foreword ........................................................................................................................................................................................................................................iv
1 Scope ................................................................................................................................................................................................................................. 1
2 Normative references ...................................................................................................................................................................................... 1
3 Terms and definitions ..................................................................................................................................................................................... 1
4 Apparatus ..................................................................................................................................................................................................................... 1
5 Sampling ........................................................................................................................................................................................................................ 1
6 Procedure..................................................................................................................................................................................................................... 2
6.1 Number of determinations ........................................................................................................................................................... 2
6.2 Test portion ................................................................................................................................................................................................ 2
6.3 Determination ......................................................................................................................................................................................... 2
7 Expression of results ........................................................................................................................................................................................ 2
8 Test report ................................................................................................................................................................................................................... 2
© ISO 2021 – All rights reserved iii---------------------- Page: 5 ----------------------
oSIST prEN ISO 787-2:2021
ISO/DIS 787-2:2021(E)
Foreword
ISO (the International Organization for Standardization) is a worldwide federation of national standards
bodies (ISO member bodies). The work of preparing International Standards is normally carried out
through ISO technical committees. Each member body interested in a subject for which a technical
committee has been established has the right to be represented on that committee. International
organizations, governmental and non-governmental, in liaison with ISO, also take part in the work.
ISO collaborates closely with the International Electrotechnical Commission (IEC) on all matters of
electrotechnical standardizatio...
Questions, Comments and Discussion
Ask us and Technical Secretary will try to provide an answer. You can facilitate discussion about the standard in here.