Residential solid fuel burning appliances - Part 2-1: Roomheaters

This Part 2-1 of EN 16510 is applicable to freestanding or inset roomheaters fired by solid fuel, without functional modification that operate with fire doors either as closed only or as closed or open.
The appliances covered by this Part 2-1 of EN 16510 provide heat into the space where they are installed. Additionally, where fitted with a boiler, they also provide domestic hot water and/or central heating. These appliances may burn one or more types of the following solid fuels in accordance with the appliance manufacturer’s instructions: .
 wood logs
 compressed untreated wood
 wood pellets
 solid minearal fuels
 peat briquettes.
This Part 2-1 of EN 16510 is not applicable to appliances with fan assisted combustion air or appliances that are mechanically fed.
This Part 2-1 of EN 16510 is to be used in conjunction with EN 16510-1 of which it is an integral part.

Häusliche Feuerstätten für feste Brennstoffe - Teil 2-1: Raumheizer

Dieses Dokument gilt für freistehende oder eingebaute Raumheizer für feste Brennstoffe, ohne funktionale Änderungen, die mit Feuerraumtüren ausgestattet sind und entweder geschlossen oder geschlossen und offen betrieben werden können.
Die von diesem Dokument erfassten Geräte liefern Wärme an den Raum, in dem sie installiert sind. Sofern sie mit wasserführenden Bauteilen ausgestattet sind, liefern sie Warmwasser und/oder dienen der Zentralbeheizung.
Die Geräte können eine oder mehrere Arten der folgenden festen Brennstoffe nach den Anweisungen des Geräteherstellers verfeuern:
-   Scheitholz;
-   Holzbriketts;
-   Holzpellets;
-   Braunkohlenbriketts;
-   feste mineralische Brennstoffe;
-   Torfbriketts.
Dieses Dokument ist nicht anwendbar auf Geräte mit Verbrennungsluftgebläse oder mechanisch beschickte Feuerstätten.
Dieses Dokument wird in Verbindung mit EN 16510 1 angewendet, von der sie ein integraler Bestandteil ist.

Equipement de chauffage domestique - Partie 2-1 : Poêles

Le présent document s’applique aux poêles à combustible solide indépendants ou encastrés, sans modification fonctionnelle, utilisés avec les portes foyères soit uniquement fermées, soit fermées ou ouvertes.
Les appareils couverts par le présent document produisent de la chaleur dans l’espace où ils sont installés. De plus, lorsqu’ils sont équipés d’un bouilleur, ils produisent également de l’eau chaude sanitaire et/ou du chauffage central.
Ces appareils peuvent utiliser un ou plusieurs des types de combustibles solides suivants, conformément aux instructions du fabricant de l’appareil :
-   bûches de bois ;
-   bois compressé non traité ;
-   granulés de bois ;
-   briquettes de lignite ;
-   combustibles minéraux solides ;
-   briquettes de tourbe.
Le présent document ne s’applique pas aux appareils équipés d’un ventilateur pour l’alimentation en air de combustion ou aux appareils à alimentation mécanique.
Le présent document doit être utilisé conjointement avec l’EN 16510 1 qui en fait partie intégrante.

Grelne naprave na trdna goriva za stanovanjske stavbe - 2-1. del: Grelniki prostorov

General Information

Status
Not Published
Public Enquiry End Date
04-May-2021
Technical Committee
Current Stage
4020 - Public enquire (PE) (Adopted Project)
Start Date
26-Feb-2021
Due Date
16-Jul-2021
Completion Date
31-May-2021

RELATIONS

Buy Standard

Draft
oSIST prEN 16510-2-1:2021
English language
23 pages
sale 10% off
Preview
sale 10% off
Preview

e-Library read for
1 day

Standards Content (sample)

SLOVENSKI STANDARD
oSIST prEN 16510-2-1:2021
01-april-2021
Stanovanjske grelne naprave na trdna goriva - 2-1. del: Grelniki prostorov
Residential solid fuel burning appliances - Part 2-1: Roomheaters
Häusliche Feuerstätten für feste Brennstoffe - Teil 2-1: Raumheizer
Equipement de chauffage domestique - Partie 2-1 : Poêles
Ta slovenski standard je istoveten z: prEN 16510-2-1
ICS:
97.100.30 Grelniki na trdo gorivo Solid fuel heaters
oSIST prEN 16510-2-1:2021 en,fr,de

2003-01.Slovenski inštitut za standardizacijo. Razmnoževanje celote ali delov tega standarda ni dovoljeno.

---------------------- Page: 1 ----------------------
oSIST prEN 16510-2-1:2021
---------------------- Page: 2 ----------------------
oSIST prEN 16510-2-1:2021
DRAFT
EUROPEAN STANDARD
prEN 16510-2-1
NORME EUROPÉENNE
EUROPÄISCHE NORM
April 2021
ICS 97.100.30
English Version
Residential solid fuel burning appliances - Part 2-1:
Roomheaters

Equipement de chauffage domestique - Partie 2-1 : Häusliche Feuerstätten für feste Brennstoffe - Teil 2-1:

Poêles Raumheizer

This draft European Standard is submitted to CEN members for enquiry. It has been drawn up by the Technical Committee

CEN/TC 295.

If this draft becomes a European Standard, CEN members are bound to comply with the CEN/CENELEC Internal Regulations

which stipulate the conditions for giving this European Standard the status of a national standard without any alteration.

This draft European Standard was established by CEN in three official versions (English, French, German). A version in any other

language made by translation under the responsibility of a CEN member into its own language and notified to the CEN-CENELEC

Management Centre has the same status as the official versions.

CEN members are the national standards bodies of Austria, Belgium, Bulgaria, Croatia, Cyprus, Czech Republic, Denmark, Estonia,

Finland, France, Germany, Greece, Hungary, Iceland, Ireland, Italy, Latvia, Lithuania, Luxembourg, Malta, Netherlands, Norway,

Poland, Portugal, Republic of North Macedonia, Romania, Serbia, Slovakia, Slovenia, Spain, Sweden, Switzerland, Turkey and

United Kingdom.

Recipients of this draft are invited to submit, with their comments, notification of any relevant patent rights of which they are

aware and to provide supporting documentation.

Warning : This document is not a European Standard. It is distributed for review and comments. It is subject to change without

notice and shall not be referred to as a European Standard.
EUROPEAN COMMITTEE FOR STANDARDIZATION
COMITÉ EUROPÉEN DE NORMALISATION
EUROPÄISCHES KOMITEE FÜR NORMUNG
CEN-CENELEC Management Centre: Rue de la Science 23, B-1040 Brussels

© 2021 CEN All rights of exploitation in any form and by any means reserved Ref. No. prEN 16510-2-1:2021 E

worldwide for CEN national Members.
---------------------- Page: 3 ----------------------
oSIST prEN 16510-2-1:2021
prEN 16510-2-1:2021 (E)
Contents Page

European foreword ....................................................................................................................................................... 4

1 Scope .................................................................................................................................................................... 5

2 Normative references .................................................................................................................................... 5

3 Terms and definitions ................................................................................................................................... 5

4 Descriptive features ....................................................................................................................................... 5

5 Appliances Performance requirements in relation to safety .......................................................... 5

6 Appliances performance requirements in relation to the appliance operation ...................... 6

7 Appliance instructions .................................................................................................................................. 6

8 Sustainable use of natural resources ....................................................................................................... 6

9 Assessment and verification of constancy of performance - AVCP ............................................... 6

10 Marking and technical datasheet .............................................................................................................. 6

Annex A (normative) Test methods ....................................................................................................................... 7

A.1 Test environment ............................................................................................................................................ 7

A.2 Test assembly ................................................................................................................................................... 7

A.3 Measurement equipment ............................................................................................................................. 7

A.4 Test procedures ............................................................................................................................................... 7

A.5 Test results ........................................................................................................................................................ 8

A.6 Calculation methods ....................................................................................................................................... 8

A.7 Test report ......................................................................................................................................................... 8

Annex B (normative) Test fuels and recommended fuels ............................................................................. 9

Annex C (informative) Arrangement for measuring the leakage rate ................................................... 10

Annex D (normative) Measuring procedure for nitrogen oxides (NOx) ............................................... 11

Annex E (normative) Measuring procedure for organic gaseous compounds (OGC) ...................... 12

Annex F (normative) Measuring procedure for particulate matter (PM) ............................................. 13

Annex G (informative) Guideline for the characteristics to be taken into account in order to

decide on families of appliances ............................................................................................................. 14

Annex H (informative) Deviation of measuring results as a basis for market surveillance

measurements ............................................................................................................................................... 15

Annex I (informative) Standing Air Loss ........................................................................................................... 16

Annex J (informative) A-deviations .................................................................................................................... 17

Annex K (normative) Energy Label ..................................................................................................................... 18

Annex ZA (informative) Relationship of this European Standard with Regulation (EU) No.

305/2011 ........................................................................................................................................................ 19

ZA.1 Scope and relevant characteristics ........................................................................................................ 19

---------------------- Page: 4 ----------------------
oSIST prEN 16510-2-1:2021
prEN 16510-2-1:2021 (E)

ZA.2 System of Assessment and Verification of Constancy of Performance (AVCP) ...................... 22

ZA.3 Assignment of AVCP tasks ......................................................................................................................... 22

---------------------- Page: 5 ----------------------
oSIST prEN 16510-2-1:2021
prEN 16510-2-1:2021 (E)
European foreword

This document (prEN 16510-2-1:2021) has been prepared by Technical Committee CEN/TC 295

“Residential solid fuel burning appliances”, the secretariat of which is held by BSI.

This document is currently submitted to the CEN Enquiry.

This document together with EN 16510-1:2021 and EN 16510-2-6 will supersede EN 13240:2001 as

amended and corrected.

This document has been prepared under a standardization request given to CEN/CENELEC by the

European Commission and the European Free Trade Association.

For relationship with (EU) Regulation 305/2011, see informative Annex ZA, which is an integral part of

this document.

The structure of EN 16510, Residential solid fuel burning appliances, is as follows:

— Part 1: General requirements and test methods;
— Part 2-1: Roomheaters;
— Part 2-2: Inset appliances including open fires;
— Part 2-3: Cookers;
— Part 2-4: Independent boilers – Nominal heat output up to 50 kW;
— Part 2-5: Slow heat release appliances;

— Part 2-6: Mechanically by wood pellets fed roomheaters, inset appliances and cookers.

Other sections of Part 2 will be added to cover residential solid fuel burning appliances not included in

parts 2-1 to 2-6.

This Part 2-1 supplements or modifies the corresponding clauses in prEN 16510-1:2021, so as to convert

that publication into the European Standard: Residential solid fuel burning appliances – Requirements and

test methods for roomheaters.

This document is expected be used in conjunction with prEN 16510-1:2021. This document refers to

Clauses of prEN 16510-1:2021 or adapts Clauses by stating “with the following modification”, “with the

following addition”, “is replaced by the following” or “shall not be applicable” in the corresponding Clause.

This document adds Clauses or Subclauses to the structure of prEN 16510-1:2021 which are particular

to this document.

Subclauses and Figures which are additional to those in prEN 16510-1:2021 are numbered starting with

101. Annexes which are additional to those in prEN 16510-1:2021 are numbered starting with AA.

---------------------- Page: 6 ----------------------
oSIST prEN 16510-2-1:2021
prEN 16510-2-1:2021 (E)
1 Scope

This document is applicable to freestanding or inset roomheaters fired by solid fuel, without functional

modification that operate with fire doors either as closed only or as closed or open.

The appliances covered by this document provide heat into the space where they are installed.

Additionally, where fitted with a boiler, they also provide domestic hot water and/or central heating.

These appliances can burn one or more types of the following solid fuels in accordance with the appliance

manufacturer’s instructions:
— wood logs;
— compressed untreated wood;
— wood pellets;
— lignite briquettes;
— solid mineral fuels;
— peat briquettes.

This document is not applicable to appliances with fan assisted combustion air or appliances that are

mechanically fed.

This document is used in conjunction with EN 16510-1 of which it is an integral part.

2 Normative references

The following documents are referred to in the text in such a way that some or all of their content

constitutes requirements of this document. For dated references, only the edition cited applies. For

undated references, the latest edition of the referenced document (including any amendments) applies.

prEN 16510-1:2021 Residential solid fuel burning appliances — Part 1: General requirements and test

methods
3 Terms and definitions
For the purposes of this document, the definitions in prEN 16510-1:2021 apply.

ISO and IEC maintain terminological databases for use in standardization at the following addresses:

— ISO Online browsing platform: available at https://www.iso.org/obp
— IEC Electropedia: available at http://www.electropedia.org/
4 Descriptive features
prEN 16510-1:2021, Clause 4, shall be applicable.
5 Appliances Performance requirements in relation to safety
prEN 16510-1:2021, Clause 5, shall be applicable.
---------------------- Page: 7 ----------------------
oSIST prEN 16510-2-1:2021
prEN 16510-2-1:2021 (E)
6 Appliances performance requirements in relation to the appliance operation

prEN 16510-1:2021, Clause 6, shall be applicable with the following modification.

6.7 Refuelling intervals
prEN 16510-1:2021, 6.7, shall be applicable with the following modification.
Replacement of Table 12:
Table 12 — Minimum refuelling intervals
Appliance type Test fuel type Minimum refuelling interval or
(as detailed in Table B.1) burning rate
At nominal heat output
Wood logs, lignite briquettes or
1,5 h
Continuous burning
peat briquettes
appliance
All other test fuels 4 h
Wood logs, lignite briquettes or
40 min
Intermittent burning
peat briquettes
appliance
All other test fuels 1 h
At slow combustion
Wood logs, lignite briquettes or
3 h
Continuous burning
peat briquettes
appliance
All other test fuels 12 h
Wood logs, lignite briquettes or
no requirements
Intermittent burning
peat briquettes
appliance
All other test fuels 10 h
7 Appliance instructions
prEN 16510-1:2021, Clause 7, shall be applicable.
8 Sustainable use of natural resources
prEN 16510-
...

Questions, Comments and Discussion

Ask us and Technical Secretary will try to provide an answer. You can facilitate discussion about the standard in here.