This European Standard is applicable to residential solid fuel burning appliances.
This European Standard is not applicable to appliances with boiler parts in contact with fire or flue gases other than steel or cast iron.
This European Standard includes as well appliances which are designed for operating under room sealed conditions and that are intended to be installed with a chimney not serving any other appliance.
NOTE   Appliances receiving combustion air from outside by means of a pipe s...
view more

    • sale 10% off
    • Standard
      151 pages
      English language
    • e-Library read for
      1 day

This European Standard is applicable to residential solid fuel burning appliances.
This European Standard specifies requirements relating to the design, manufacture, construction, safety and performance (efficiency and emission) of appliances fired by solid fuel (hereafter referred to as appliance(s)) and provides instructions for them. Furthermore, it also gives provisions for the evaluation of conformity i.e. initial type testing (ITT) and factory production control (FPC) and marking of these...
view more

    • sale 10% off
    • Standard
      151 pages
      English language
    • e-Library read for
      1 day

TC - Addition of NOTE in 6.2

    • sale 10% off
    • Corrigendum
      2 pages
      English, French and German language
    • e-Library read for
      1 day

TC - Addition of NOTE in 6.3

    • sale 10% off
    • Corrigendum
      2 pages
      English, French and German language
    • e-Library read for
      1 day

TC - Addition of NOTE in 6.3.2

    • sale 10% off
    • Corrigendum
      2 pages
      English, French and German language
    • e-Library read for
      1 day

TC - Modification to A.6.2.1.2, Equation 4

    • sale 10% off
    • Corrigendum
      3 pages
      English, French and German language
    • e-Library read for
      1 day

TC - Modification to A.6.2.1.1

    • sale 10% off
    • Corrigendum
      3 pages
      English, French and German language
    • e-Library read for
      1 day

TC - Modification to A.6.2.1.1

    • sale 10% off
    • Corrigendum
      3 pages
      English, French and German language
    • e-Library read for
      1 day

The standard is applicable to hand and automatically fired appliances having nominal heat outputs up to 50 kW, the primary function of which is to provide hot water for central heating and/or domestic use, and which are designed for use only with open vented systems at a working pressure not exceeding 2 bar. In addition to their primary function of providing hot water these appliances also provide space heating to the place of installation. These appliances may burn naturally occurring or manufa...view more

    • sale 10% off
    • Amendment
      20 pages
      English language
    • e-Library read for
      1 day
    • sale 10% off
    • Amendment
      22 pages
      German language
    • e-Library read for
      1 day

This Standard is applicable to non-mechanically fired appliances whose primary function is to provide heat into the space in which they are installed and which are listed under categories 1a and 2a of table 1 of prEN 13240. Additionally, where fitted with a boiler, they also provide domestic hot water and/or central heating. These appliances may burn naturally occurring or manufactured solid mineral fuels, peat briquettes, natural or manufactured wood logs and biomass based products which are in...view more

    • sale 10% off
    • Amendment
      23 pages
      English language
    • e-Library read for
      1 day

This Standard is applicable to hand fired appliances whose primary function is to cook and whose secondary function is to provide heat into the space in which they are installed. Additionally, where fitted with a boiler, they also provide domestic hot water and/or central heating. These appliances may burn naturally occuring or manufactured solid mineral fuels, peat briquettes, natural or manufactured wood logs and biomass based products which are in the form of an identifiable consistent produc...view more

    • sale 10% off
    • Amendment
      22 pages
      English language
    • e-Library read for
      1 day
    • sale 10% off
    • Amendment
      22 pages
      German language
    • e-Library read for
      1 day

This Standard is applicable to hand fired appliances whose primary function is to provide heat into the space in which they are installed and which are listed under categories 1b, 1c, 2b, 2c, 3a, 3b and 3c of table 1 of prEN 13229. Additionally, where fitted with a boiler, they also provide domestic hot water and/or central heating. These appliances may burn naturally occurring or manufactured solid mineral fuels, peat briquettes, natural or manufactured wood logs and biomass based products whic...view more

    • sale 10% off
    • Amendment
      23 pages
      English language
    • e-Library read for
      1 day
    • sale 10% off
    • Amendment
      23 pages
      German language
    • e-Library read for
      1 day

The amendment to be drafted to cover Kachelofen and Putzofen appliances.

    • sale 10% off
    • Amendment
      22 pages
      English language
    • e-Library read for
      1 day
    • sale 10% off
    • Amendment
      21 pages
      German language
    • e-Library read for
      1 day

This European Standard specifies requirements relating to the design, manufacture, construction, safety and performance (efficiency and emission), instructions and marking together with associated test methods for type testing, residential open fires and inset appliances fired by solid fuel.
This standard is applicable to hand fired appliances which are listed under categories 1b, 1c, 2b, 2c, 3a, 3b and 3c of Table 1. The surround of the appliances is integrated with the building with the exc...
view more

    • sale 10% off
    • Standard
      72 pages
      English language
    • e-Library read for
      1 day
    • sale 10% off
    • Standard
      63 pages
      German language
    • e-Library read for
      1 day
    • sale 10% off
    • Standard – translation
      84 pages
      Slovenian language
    • e-Library read for
      1 day

This European Standard specifies requirements relating to the design, manufacture, construction, safety and performance (efficiency and emission) instructions and marking together with associated test methods and test fuels for type testing residential roomheaters fired by solid fuel.
This Standard is applicable to non-mechanically fired appliances which are listed under categories 1a and 2a of Table 1. These appliances provide heat into the space where they are installed. Additionally, where...
view more

    • sale 10% off
    • Standard
      64 pages
      English language
    • e-Library read for
      1 day

This European Standard specifies requirements relating to the design, manufacture, construction, safety and performance (efficiency and emission), instructions and marking together with associated test methods and test fuels for type testing residential cooking appliances fired by solid fuel.
This Standard is applicable to hand fired appliances whose primary function is to cook and whose secondary function is to provide heat into the space in which they are installed.  Additionally, where fit...
view more

    • sale 10% off
    • Standard – translation
      81 pages
      Slovenian language
    • e-Library read for
      1 day
    • sale 10% off
    • Standard
      73 pages
      English language
    • e-Library read for
      1 day
    • sale 10% off
    • Standard
      59 pages
      German language
    • e-Library read for
      1 day

This European Standard specifies requirements relating to the design, manufacture, construction, performance (efficiency and emission), safety, instructions and marking together with associated test methods and test fuels for type testing residential independent boilers fired by solid fuel.
This standard is applicable to hand and automatically fired appliances having nominal heat outputs up to 50 kW, the primary function of which is to provide hot water for central heating and/or domestic use...
view more

    • sale 10% off
    • Standard
      60 pages
      English language
    • e-Library read for
      1 day
    • sale 10% off
    • Standard
      48 pages
      German language
    • e-Library read for
      1 day

Definition of technical specifications and requirements of prefabricated hot water radiant panels fed with water at temperatures below 120°C supplied by a remote heat source and definition of the additional common data that the manufacturer shall provide to the trade in order to ensure the correct application of the products. The document does not apply to independent heating appliances.

    • sale 10% off
    • Draft
      33 pages
      English language
    • e-Library read for
      1 day
    • sale 10% off
    • Standard
      32 pages
      English language
    • e-Library read for
      1 day

This European Standard defines technical specifications and requirements of free hanging prefabricated ceil-ing mounted radiant panels with an air gap between construction and the emitter (not embedded) fed with water at temperatures below 120 °C connected with a centralized heating supply source intended to be in-stalled in buildings.
The panels should be installed with an upper insulation.
The European Standard does not apply to independent heating devices.
The European Standard also define...
view more

    • sale 10% off
    • Draft
      33 pages
      English language
    • e-Library read for
      1 day
    • sale 10% off
    • Standard
      32 pages
      English language
    • e-Library read for
      1 day

This part of EN 442 defines procedures for determining the standard thermal outputs and other characteristics of metallic radiators and convectors installed in a permanent manner in construction works, fed with water or steam at temperatures below 120 °C, supplied by a remote heat source
This European Standard specifies the laboratory arrangements and testing methods to be adopted, the admissible tolerances, the criteria for selecting the samples to be tested and for verifying the conformity of...
view more

    • sale 10% off
    • Draft
      73 pages
      English language
    • e-Library read for
      1 day
    • sale 10% off
    • Standard
      78 pages
      English language
    • e-Library read for
      1 day

This part of EN 442 defines the technical specifications and requirements of radiators and convectors to be installed in heating systems in buildings including evaluation of conformity.
This European Standard deals with metallic radiators and convectors installed  in a permanent manner in construction works, fed with water or steam at temperatures below 120 °C, supplied by a remote heat source.
This European Standard does not apply to
-  fan assisted radiators, fan assisted convectors and tre...
view more

    • sale 10% off
    • Draft
      36 pages
      English language
    • e-Library read for
      1 day
    • sale 10% off
    • Standard
      38 pages
      English language
    • e-Library read for
      1 day

This European Standard defines procedures for determining the standard thermal outputs and other characteristics of radiators and convectors installed in a permanent manner in construction works, fed with water or steam at temperatures below 120 °C, supplied by a remote energy source.
This European Standard specifies the laboratory arrangements and testing methods to be adopted, the admissible tolerances, the criteria for selecting the samples to be tested and for verifying the conformity of th...
view more

    • sale 10% off
    • Draft
      73 pages
      English language
    • e-Library read for
      1 day
    • sale 10% off
    • Standard
      78 pages
      English language
    • e-Library read for
      1 day

This European Standard defines the technical specifications and requirements of radiators and convectors to be installed in heating systems in buildings including assessment and verification of constancy of performance.
This European Standard deals with radiators and convectors installed in a permanent manner in construction works, fed with water or steam at temperatures below 120 °C, supplied by a remote energy source.
This European Standard does not apply to independent heating appliances.
...
view more

    • sale 10% off
    • Draft
      36 pages
      English language
    • e-Library read for
      1 day
    • sale 10% off
    • Standard
      38 pages
      English language
    • e-Library read for
      1 day

This European Standard covers multi-firing sauna stoves in which the heating stones are separated from and indirectly heated by the fire and the flue gases and which may be re-fuelled with several fuel loads. This European Standard specifies requirements relating to the design, manufacture, construction, safety and performance (efficiency and emission) of multi-firing sauna stoves fired by wood logs and provides instructions for them. Furthermore, it also gives provisions for evaluation of confo...view more

    • sale 10% off
    • Draft
      53 pages
      English language
    • e-Library read for
      1 day
    • sale 10% off
    • Standard
      55 pages
      English language
    • e-Library read for
      1 day

This European Standard covers multi-firing sauna stoves in which the heating stones are separated from and indirectly heated by the fire and the flue gases and which may be re-fuelled with several fuel loads.
This European Standard specifies requirements relating to the design, manufacture, construction, safety and performance (efficiency and emission) of multi-firing sauna stoves fired by wood logs and provides instructions for them. Furthermore, it also gives provisions for evaluation of conf...
view more

    • sale 10% off
    • Draft
      53 pages
      English language
    • e-Library read for
      1 day
    • sale 10% off
    • Standard
      55 pages
      English language
    • e-Library read for
      1 day

This European Standard specifies requirements relating to the design, manufacture, construction, safety and performance (efficiency and emission) instructions and marking together with associated test methods and test fuels for type testing residential slow heat release appliances fired by solid fuel.
This European Standard is applicable to hand fuelled intermittent burning slow heat release appliances having thermal storage capacity such that they can provide heat for a declared period of time...
view more

    • sale 10% off
    • Draft
      57 pages
      English language
    • e-Library read for
      1 day
    • sale 10% off
    • Standard
      63 pages
      English language
    • e-Library read for
      1 day

EN 1/prA1 covers all points to fulfil the requirements of mandate M/129 under the CPD given from the EC to CEN.

    • sale 10% off
    • Amendment
      14 pages
      English language
    • e-Library read for
      1 day
    • sale 10% off
    • Amendment
      29 pages
      English language
    • e-Library read for
      1 day

EN 1/prA1 covers all points to fulfil the requirements of mandate M/129 under the CPD given from the EC to CEN.

    • sale 10% off
    • Amendment
      14 pages
      English language
    • e-Library read for
      1 day
    • sale 10% off
    • Amendment
      29 pages
      English language
    • e-Library read for
      1 day

This European Standard specifies requirements relating to the design, manufacture, construction, safety and performance (efficiency and emission) instructions and marking together with associated test methods and test fuels for type testing residential slow heat release appliances fired by solid fuel.
This European Standard is applicable to hand fuelled intermittent burning slow heat release appliances having thermal storage capacity such that they can provide heat for a declared period of time...
view more

    • sale 10% off
    • Draft
      57 pages
      English language
    • e-Library read for
      1 day
    • sale 10% off
    • Standard
      63 pages
      English language
    • e-Library read for
      1 day

This European Standard specifies requirements relating to the design, manufacture, construction, safety and performance (efficiency and emissions), instructions and marking together with associated test methods and test fuels for type-testing residential space heaters fired by wood pellets, and mechanically fed up to 50 kW nominal heat output. These appliances may be freestanding or inset appliances and provide heat into the space where they are installed and may be operated with either natural ...view more

    • sale 10% off
    • Standard
      72 pages
      English language
    • e-Library read for
      1 day

This European Standard specifies requirements relating to the design, manufacture, construction, safety and performance (efficiency and emissions), instructions and marking together with associated test methods and test fuels for type-testing residential space heaters fired by wood pellets, and mechanically fed up to 50 kW nominal heat output.
These appliances may be freestanding or inset appliances and provide heat into the space where they are installed and may be operated with either natural...
view more

    • sale 10% off
    • Standard
      72 pages
      English language
    • e-Library read for
      1 day

This standard applies to flued oil stoves with one or more vaporizing burners (hereafter referred to as 'stoves') as used for individual heating in the domestic field and having either a draught regulator or a combustion air limiter as defined in 3.13 and a nominal heating capacity of not more than 15 kW. It is not applicable for built-in equipment.

    • sale 10% off
    • Standard
      31 pages
      English language
    • e-Library read for
      1 day

This document is applicable to all types of fluid heating solar collectors. This European Standard specifies performance requirements for fluid heating solar collectors with respect to durability, reliability, safety and thermal performance. This European Standard includes provisions for the assessment and verification of constancy of performance to these requirements.
This document deals with the collector module and not with assemblies. This document is not applicable to those devices in whic...
view more

    • sale 10% off
    • Draft
      43 pages
      English language
    • e-Library read for
      1 day

This standard applies to flued oil stoves with one or more vaporizing burners (hereafter referred to as "stoves") as used for individual heating in the domestic field and having either a draught regulator or a combustion air limiter as defined in 3.13 and a nominal heating capacity of not more than 15 kW. This standard also applies to appliances with fan assisted vaporizing burners. This standard does not cover - Built-in appliances - appliances equipped with an atomizing burner - appliances inc...view more

    • sale 10% off
    • Draft
      61 pages
      English language
    • e-Library read for
      1 day

This Part 2-4 of EN 16510 is applicable to hand and automatically fired residential independent boilers having nominal heat outputs up to 50 kW, the primary function of which is to provide hot water for central heating and/or domestic use, and which are designed for use only with open vented systems at a working pressure not exceeding 2 bar. In addition to their primary function of providing hot water these appliances also provide space heating to the place of installation.
The appliances cover...
view more

    • sale 10% off
    • Draft
      29 pages
      English language
    • e-Library read for
      1 day

This Part 2-3 of EN 16510 is applicable to hand fired residential cookers whose primary function is to cook and whose secondary function is to provide heat into the space in which they are installed. Additionally, where fitted with a boiler, they also provide domestic hot water and/or central heating. These appliances may burn either solid mineral fuels, lignite briquettes, peat briquettes, natural or manufactured wood logs or be multi-fuel in accordance with the appliance manufacturer's instruc...view more

    • sale 10% off
    • Draft
      37 pages
      English language
    • e-Library read for
      1 day

This Part 2-2 of EN 16510 is applicable to hand fed solid fuel fired inset appliances, with or without functional modification, that operate without firedoors or operate with fire doors either as closed only or as closed or open, and also includes open fires fired by solid fuel. The surround of these appliances are integrated with the building with the exception of free-standing appliances and those inset appliances which are installed into a fireplace recess or enclosure. These appliances provi...view more

    • sale 10% off
    • Draft
      35 pages
      English language
    • e-Library read for
      1 day

This Part 2-1 of EN 16510 is applicable to freestanding or inset roomheaters fired by solid fuel, without functional modification that operate with fire doors either as closed only or as closed or open. This European Standard is also only applicable to non-mechanically fired roomheaters.
The appliances covered by this Part 2-1 of EN 16510 provide heat into the space where they are installed. Additionally, where fitted with a boiler, they also provide domestic hot water and/or central heating. T...
view more

    • sale 10% off
    • Draft
      24 pages
      English language
    • e-Library read for
      1 day

This European Standard is applicable to residential freestanding hand fuelled intermittent burning slow heat release appliances having thermal storage capacity such that they can provide heat for an extended period of time after the fire has gone out. These slow heat release appliances may be supplied either as an assembled appliance or as a manufacturer’s pre-designed unit consisting of pre-fabricated components designed to be built on site in accordance with the manufacturer’s specified assemb...view more

    • sale 10% off
    • Draft
      120 pages
      English language
    • e-Library read for
      1 day

This European Standard defines the technical specifications and requirements of ceiling mounted hot water radiant panels, heating and cooling surfaces fed with water at temperatures below 120 °C connected with a centralized heating and/or cooling supply source.

    • sale 10% off
    • Draft
      25 pages
      English language
    • e-Library read for
      1 day

This European Standard specifies requirements relating to the design, manufacture, construction, performance (efficiency and emission), safety, instructions and marking together with associated test methods and test fuels for type testing residential independent boilers fired by solid fuel.
This standard is applicable to hand and automatically fired appliances having nominal heat outputs up to 50 kW, the primary function of which is to provide hot water for central heating and/or domestic use...
view more

    • sale 10% off
    • Draft
      82 pages
      English language
    • e-Library read for
      1 day

This European Standard specifies requirements relating to the design, manufacture, construction, safety and performance (efficiency and emission), instructions and marking together with associated test methods and test fuels for type testing residential coking apliances fired by solid fuel.
This standard is applicable to hand fired appliances whose primary function is to cook and whose secondary function is to provide heat into the space in which they are installed. Additionally, where fitted...
view more

    • sale 10% off
    • Draft
      98 pages
      English language
    • e-Library read for
      1 day

This European Standard specifies requirements relating to the design, manufacture, construction, safety and performance (efficiency and emission) instructions and marking together with associated test methods and test fuels for type testing residential roomheaters fired by solid fuel.
This Standard is applicable to non-mechanically fired appliances which are listed under categories 1a and 2a of Table 1. These appliances provide heat into the space where they are installed. Additionally, where...
view more

    • sale 10% off
    • Draft
      88 pages
      English language
    • e-Library read for
      1 day

This European Standard specifies requirements relating to the design, manufacture, construction, safety and performance (efficiency and emission), instructions and marking together with associated test methods for type testing, residential open fires and inset appliances fired by solid fuel.
This standard is applicable to hand fired appliances which are listed under categories 1b, 1c, 2b, 2c, 3a, 3b and 3c of Table 1. The surround of the appliances is integrated with the building with the exc...
view more

    • sale 10% off
    • Draft
      104 pages
      English language
    • e-Library read for
      1 day

This European Standard defines the technical specifications and requirements of radiators and convectors
to be installed in central heating systems in residential buildings.
Radiators and convectors are components for installation in a permanent manner in construction works.
This European Standard covers radiators and convectors fed with water or steam at temperatures below
120 °C, supplied by a remote heat source.
This European Standard does not apply to independent heating appliances.
Th...
view more

    • sale 10% off
    • Draft
      14 pages
      English language
    • e-Library read for
      1 day

This European Standard defines procedures for determining the standard thermal outputs of heating
appliances fed with water or steam at temperatures below 120 °C, supplied by a remote heat source.
This European Standard specifies the laboratory arrangements and testing methods to be adopted, the
admissible tolerances, the criteria for selecting the samples to be tested and for verifying the conformity of the
current production with the samples tested at the initial test.
This European Stand...
view more

    • sale 10% off
    • Draft
      70 pages
      English language
    • e-Library read for
      1 day

2007-09-21  Work item deleted to 3 year time frame.

    • sale 10% off
    • Draft
      17 pages
      English language
    • e-Library read for
      1 day

This European Standard specifies requirements relating to the design, manufacture, construction, safety and performance (efficiency and emission), instructions and marking together with associated test methods and test fuels for type testing residential coking apliances fired by solid fuel.
This standard is applicable to hand fired appliances whose primary function is to cook and whose secondary function is to provide heat into the space in which they are installed. Additionally, where fitted...
view more

    • sale 10% off
    • Draft
      98 pages
      English language
    • e-Library read for
      1 day