iTeh StandardsiTeh Standards
EURUSD
Your shopping cart is empty!
IEC

104 - Environmental conditions, classification and methods of test

1. Standardization of environmental condition classes which represent the conditions to which products are most likely to be subjected whilst being: - transported, - stored, - installed and - used. The classification shall use validated environmental parameters and provide guidance in the selection and use of those classes intended for the preparation of relevant specifications. 2. Standardization of environmental test methods intended for the preparation of relevant specifications and to provide guidance in the selection and use of those methods. 3. The correlation and transformation of environmental condition classes to environmental tests. 4. Excluded from the scope of this committee are those matters which are within the scope of other IEC Committees, such as Electromagnetic Compatibility (TC 77 and CISPR), Safety (TC 62, TC 66 and TC 74), Fire Hazard (TC 89), Ionizing Radiation (TC 45), Explosive Atmospheres (TC 31) and Dependability (TC 56). Internal liaisons are maintained with those IEC committees which are specifically excluded from the scope.

Conditions, classification et essais d'environnement

1. Normalisation des classes de conditions d'environnement qui représentent les conditions auxquelles les produits seront le plus probablement soumis : - au cours du transport, - au cours du stockage, - au cours de l'installation et - en cours d'utilisation. La classification fait appel à des paramètres (agents)d'environnement reconnus valables et elle donne les directives de choix et d'utilisation des classes destinées à la préparation des spécifications correspondantes. 2. Normalisation des méthodes d'essai d'environnement destinées à la préparation de spécifications appropriées et des directives de choix et d'utilisation de ces méthodes. 3. Corrélation et transformation des classes de conditions d'environnement aux essais d'environnement. 4. Sont exclues du domaine d'activité de ce comité les questions inscrites aux domaines d'activités d'autres comités de la CEIcomme la compatibilité électromagnétique (CE 77 et CISPR), lasécurité (CE 62, CE 66 et CE 74), les risques dus au feu (CE 89), les rayonnements ionisants (CE 45), lesatmosphères explosives (CE 31) et la sûreté de fonctionnement (CE 56). Les liaisons internes sont maintenues avec les comités de la CEI qui sont exclus spécifiquement du domaine d'activité.

General Information

Status
Active
Parent
IEC/TC - IEC/TC
Standardization Organization
ICS
Directive
Mandate
20
IEC
IEC 60068-3-7:2020(Main)
Environmental testing - Part 3-7: Supporting documentation and guidance - Measurements in temperature chambers for tests A (Cold) and B (Dry heat) (with load)

IEC 60068-3-7:2020 is available as IEC 60068-3-7:2020 RLV which contains the International Standard and its Redline version, showing all changes of the technical content compared to the previous edition.
IEC 60068-3-7:2020 specifies a uniform and reproducible method of confirming that temperature test chambers conform to the requirements specified in the climatic test procedures of IEC 60068-2-1 and IEC 60068-2-2, when loaded with either heat-dissipating or non heat-dissipating specimens under...view more

    • world standards week 25% off
    • Standard
      24 pages
      English and French language
IEC
IEC 60721-3-0:2020(Main)
Classification of environmental conditions - Part 3-0: Classification of groups of environmental parameters and their severities - Introduction

IEC 60721-3-0:2020 provides guidance on the use of all parts of IEC 60721-3. It contains background information including information on the application and limitation of the classes given in various parts of IEC 60721-3 which can be used in the design, limitation of conditions and protection of equipment.
This second edition cancels and replaces the first edition published in 1984 and Amendment 1:1987. This edition constitutes a technical revision.
This edition includes the following signific...view more

    • world standards week 25% off
    • Standard
      17 pages
      English and French language
IEC
IEC TR 62131-7:2020(Main)
Environmental conditions – Vibration and shock of electrotechnical equipment - Part 7: Transportation by rotary wing aircraft

IEC 62131-7:2020(E), reviews the available dynamic data relating to the transportation of electrotechnical equipment by rotorcraft (helicopters). The intent is that from all the available data an environmental description will be generated and compared to that set out in IEC 60721 (all parts).

    • world standards week 25% off
    • Technical report
      51 pages
      English language
IEC
IEC TR 63141:2020(Main)
Damp heat, steady state (unsaturated pressurized vapour with air)

IEC TR 63141:2020(E) describes a new test method to control the volume of air injected into a conventional HAST chamber filled with water vapour. This document provides an overview of the conventional HAST chamber, an overview of the air-HAST equipment where air is incorporated into the HAST chamber, an example of an air-HAST test apparatus, and application examples of air-HAST.

    • world standards week 25% off
    • Technical report
      56 pages
      English language
IEC
IEC 60068-2-64:2008/AMD1:2019(Main)
Amendment 1 - Environmental testing - Part 2-64: Tests - Test Fh: Vibration, broadband random and guidance
    • world standards week 25% off
    • Standard
      21 pages
      English and French language
IEC
IEC 60068-3-3:2019(Main)
Environmental testing - Part 3-3: Supporting documentation and guidance - Seismic test methods for equipment

IEC 60068-3-3:2019 applies primarily to electro-technical equipment but its application can be extended to other equipment and to components. In addition, if some type of analysis is always performed when making a seismic qualification, for example for the choice of the representative sample to be tested or for the extension of the seismic qualification from the tested specimen to similar specimens, the verification of the performance of an equipment by analysis or by a combination of testing an...view more

    • world standards week 25% off
    • Standard
      95 pages
      English and French language
IEC
IEC 60068-2-67:1995/AMD1:2019(Main)
Amendment 1 - Environmental testing - Part 2-67: Tests - Test Cy: Damp heat, steady state, accelerated test primarily intended for components
    • world standards week 25% off
    • Standard
      4 pages
      English and French language
IEC
IEC 60068-2-85:2019(Main)
Environmental testing - Part 2-85: Tests - Test Fj: Vibration - Long time history replication

IEC 60068-2-85:2019 demonstrates the adequacy of specimens to resist dynamic loads without unacceptable degradation of its functional and/or structural integrity when subjected to the specified vibration test requirements as defined by a time history (long time history replication). These can either be recorded in measurement exercises or generated artificially. In both cases, this method allows for generating a test tailored to very specific applications.

    • world standards week 25% off
    • Standard
      43 pages
      English and French language
IEC
IEC 60721-3-3:2019(Main)
Classification of environmental conditions - Part 3-3: Classification of groups of environmental parameters and their severities - Stationary use at weatherprotected locations

IEC 60721-3-3:2019 classifies groups of environmental parameters and their severities to which products are subjected when installed for stationary use at weatherprotected locations.
This third edition cancels and replaces the second edition published in 1994, Amendment 1: 1995 and Amendment 2:1996. This edition constitutes a technical revision.
This edition includes the following significant technical changes with respect to the previous edition:
a) Clause 3: definitions aligned with IEC 607...view more

    • world standards week 25% off
    • Standard
      29 pages
      English and French language
IEC
IEC 60721-3-4:2019(Main)
Classification of environmental conditions - Part 3-4: Classification of groups of environmental parameters and their severities - Stationary use at non-weatherprotected locations

IEC 60721-3-4:2019 classifies groups of environmental parameters and their severities to which products are subjected when installed for stationary use at non-weatherprotected locations. Weatherprotected locations where products can be mounted for stationary use permanently or temporarily are addressed in IEC 60721-3-3.
This third edition cancels and replaces the second edition published in 1995 and Amendment 1:1996. This edition constitutes a technical revision.
This edition includes the foll...view more

    • world standards week 25% off
    • Standard
      32 pages
      English and French language
IEC
IEC 60721-2-4:2018(Main)
Classification of environmental conditions - Part 2-4: Environmental conditions appearing in nature - Solar radiation and temperature

IEC 60721-2-4:2018 is also available as IEC 60721-2-4:2018 RLV which contains the International Standard and its Redline version, showing all changes of the technical content compared to the previous edition.
IEC 60721-2-4:2018 presents a broad division into types of solar radiation areas. It is intended to be used as part of the background material when selecting appropriate severities of solar radiation for product applications. All types of geographical areas are covered, except areas with...view more

    • world standards week 25% off
    • Standard
      29 pages
      English and French language
IEC
IEC 60068-2-10:2005/AMD1:2018(Main)
Amendment 1 - Environmental testing - Part 2-10: Tests - Test J and guidance: Mould growth
    • world standards week 25% off
    • Standard
      8 pages
      English and French language
IEC
IEC 60068-2-74:1999/AMD1:2018(Main)
Amendment 1 - Environmental testing - Part 2-74: Tests - Test Xc: Fluid contamination
    • world standards week 25% off
    • Standard
      14 pages
      English and French language
IEC
IEC 60068-2-5:2018(Main)
Environmental testing - Part 2-5: Tests - Test S: Simulated solar radiation at ground level and guidance for solar radiation testing and weathering

IEC 60068-2-5:2018 is now available as IEC 60068-2-5:2018 RLV which contains the International Standard and its Redline version, showing all changes of the technical content compared to the previous edition.
IEC 60068-2-5:2018 specifies the methods for testing equipment or components under simulated solar radiation conditions. This document is applicable to the equipment and components at the surface of the earth. This third edition cancels and replaces the second edition of published in 2010...view more

    • world standards week 25% off
    • Standard
      49 pages
      English and French language
IEC
IEC 60721-2-7:2018(Main)
Classification of environmental conditions - Part 2-7: Environmental conditions appearing in nature - Fauna and flora

IEC 60721-2-7:2018 addresses the occurrence of fauna and flora, including its main effects on electrotechnical products. Exposure and damage from the effects of fauna and flora can occur at almost any time in a product's life cycle. Moreover, there are many agents of attack with various actions.
This second edition cancels and replaces the first edition published in 1987. This edition constitutes a technical revision.
This edition includes the following significant technical changes with respe...view more

    • world standards week 25% off
    • Standard
      33 pages
      English and French language
IEC
IEC 60721-3-1:2018(Main)
Classification of environmental conditions - Part 3-1: Classification of groups of environmental parameters and their severities - Storage

IEC 60721-3-1:2018 is also available as IEC 60721-3-1:2018 RLV which contains the International Standard and its Redline version, showing all changes of the technical content compared to the previous edition.
IEC 60721-3-1:2018 classifies the groups of environmental parameters and their severities to which products together with their packaging, if any, are subjected when stored. The environmental conditions specified in this document are limited to those which can directly affect the product...view more

    • world standards week 25% off
    • Standard
      28 pages
      English and French language
IEC
IEC 60721-3-2:2018(Main)
Classification of environmental conditions - Part 3-2: Classification of groups of environmental parameters and their severities - Transportation and Handling

IEC 60721-3-2:2018 RLV contains both the official IEC International Standard and its Redline version. The Redline version is not an official document, it is available in English only and provides you with a quick and easy way to compare all the changes between the official IEC Standard and its previous edition.
IEC 60721-3-2:2018 classifies the groups of environmental parameters and their severities to which a product is subjected while being transported and handled. The most commonly used me...view more

    • world standards week 25% off
    • Standard
      32 pages
      English and French language
IEC
IEC 60068-3-5:2018(Main)
Environmental testing - Part 3-5: Supporting documentation and guidance - Confirmation of the performance of temperature chambers
SIST IEC 60050-101:2014

IEC 60068-3-5:2018 is now available as IEC 60068-3-5:2018 RLV which contains the International Standard and its Redline version, showing all changes of the technical content compared to the previous edition.
IEC 60068-3-5:2018 provides a uniform and reproducible method of confirming that temperature test chambers, without specimens, conform to the requirements specified in climatic test procedures of IEC 60068-2 (all parts) and other standards. This document is intended for users when conduct...view more

    • world standards week 25% off
    • Standard
      32 pages
      English and French language
IEC
IEC 60068-3-6:2018(Main)
Environmental testing - Part 3-6: Supporting documentation and guidance - Confirmation of the performance of temperature/ humidity chambers

IEC 60068-3-6:2018 is available as IEC 60068-3-6:2018 RLV which contains the International Standard and its Redline version, showing all changes of the technical content compared to the previous edition.
IEC 60068-3-6:2018 provides a uniform and reproducible method of confirming that temperature and humidity test chambers, without specimens, conform to the requirements specified in climatic test procedures of IEC 60068-2 (all parts). This document is intended for users when conducting regular...view more

    • world standards week 25% off
    • Standard
      33 pages
      English and French language
IEC
IEC 60068-2-52:2017(Main)
Environmental testing - Part 2-52: Tests - Test Kb: Salt mist, cyclic (sodium chloride solution)

IEC 60068-2-52:2017 is now available as IEC 60068-2-52:2017 RLV which contains the International Standard and its Redline version, showing all changes of the technical content compared to the previous edition.
IEC 60068-2-52:2017 specifies the application of the cyclic salt mist test to components or equipment designed to withstand a salt-laden atmosphere as salt can degrade the performance of parts manufactured using metallic and/or non-metallic materials. This third edition cancels and repl...view more

    • world standards week 25% off
    • Standard
      33 pages
      English and French language
20