13.060.99 - Other standards related to water quality

This European Standard defines standard principles for the design of taxonomic keys to ensure proper use of nomenclatural rules and reproducible and traceable identification. These principles also allow for the selection of the best key available.

This International Standard describes the preparation of four types of water of different hardness, conductivity and alkalinity, intended to be used for testing the performance of household appliances such as washing machines, dishwashers, tumble dryers, steam irons etc. It defines the characteristics of these waters and establishes various methods to be used for obtaining them. It also includes specifications for required measurements.

This Technical Report (TR) describes a methodology to firstly identify the specific nature of oils spilled in marine, estuarine and aquatic environments and secondly compare the chemical composition of spilled oil or oily samples with that of suspected sources. Specifically, the TR describes the detailed analytical methods and data processing specifications for identifying the specific nature of waterborne oil spills and establishing their correlation to suspected sources. Even when samples or d...view more

This document provides guidance on taking and handling samples that are collected as part of an investigation into the likely source of a crude oil or petroleum product spill into a marine or aquatic environment. Guidance is given on taking samples from both the spill and its potential source.
If samples are to be used in connection with legal proceedings, this document should be read in conjunction with any documents issued by the regulatory authorities in the country and location where the sp...view more

TC - Replace Equation A.2 (E+F)

TC - Replace Equation A.2 (E+F)

This standard deals with installations for the separation of light liquids (e.g. oil and petrol), i.e. those with a density up to 0.95 g/cm3 from waste water by means of gravity and/or coalescence. The standard is not primarily intended to apply to installations that are required to treat large quantities of trade effluent (e.g., oil refinery effluent). The standard may, however, still be appropriate for this purpose depending on local requirements.

This standard deals with installations for the separation of light liquids (e.g. oil and petrol), i.e. those with a density up to 0.95 g/cm3 from waste water by means of gravity and/or coalescence. The standard is not primarily intended to apply to installations that are required to treat large quantities of trade effluent (e.g., oil refinery effluent). The standard may, however, still be appropriate for this purpose depending on local requirements.

This standard specifies definitions, nominal sizes, principles of design, performance requirements, marking, testing and quality control for grease separators.
This standard applies to separators for the separation of greases and oils of vegetable and animal origin from wastewater by means of gravity and without any external energy.
This standard does not cover grease separators intended to treat domestic wastewater from kitchen areas of single family dwellings, where the separator has a nomin...view more

This standard specifies definitions, nominal sizes, principles of design, performance requirements, marking, testing and quality control for grease separators.
This standard applies to separators for the separation of greases and oils of vegetable and animal origin from wastewater by means of gravity and without any external energy.
This standard does not cover grease separators intended to treat domestic wastewater from kitchen areas of single family dwellings, where the separator has a nomin...view more

This standard specifies definitions, principles of sizing, installation, operation and maintenance of separator systems for light liquids in accordance with prEN 858-1:1997 as well as requirements and test methods for cleansing agents discharged with the waste water into the separator system. When pollution control requires the treatment of pollutants other than light liquids, additional measures shall be necessary.

Supersedes EN 60734:1993

This standard specifies definitions, principles of sizing, installation, operation and maintenance of separator systems for light liquids in accordance with prEN 858-1:1997 as well as requirements and test methods for cleansing agents discharged with the waste water into the separator system. When pollution control requires the treatment of pollutants other than light liquids, additional measures shall be necessary.

This standard deals with installations for the separation of light liquides (e.g. oil and petrol), i.e. those with a density up to 0.95 g/cm3 from waste water by means of gravity and/or coalescence. The standard is not primarily intended to apply to installations that are required to treat large quantities of trade effluent (e.g., oil refinery effluent). The standard may, however, still be appropriate for this purpose depending on local requirements.

This standard deals with installations for the separation of light liquides (e.g. oil and petrol), i.e. those with a density up to 0.95 g/cm3 from waste water by means of gravity and/or coalescence. The standard is not primarily intended to apply to installations that are required to treat large quantities of trade effluent (e.g., oil refinery effluent). The standard may, however, still be appropriate for this purpose depending on local requirements.

EN 15522-1 provides guidance on taking and handling samples, that are collected as part of an investigation into the likely source of a crude oil or petroleum product spill into a marine or aquatic environment. Guidance is given on taking samples from both the spill and its potential source.
Mostly, oil sampling is part of legal procedures and has to be treated like any other preservation of evidence (legal sampling). If samples are to be used in connection with legal proceedings, this document...view more

to revise it into a full test method and to bring the precision statement in line with the actual day-to-day precision, using the actual PT schemes

This document provides guidance for assessing the efficiency and related metrics of fish passage solutions using telemetry methods that allow fish approaching an impediment to be monitored.
It provides recommendations and requirements for equipment, study design, data analysis and reporting. A selected literature with references in support of this standard is given in the Bibliography section.

This document specifies standardized methods for assessing the efficiency and related metrics of fish passage solutions using telemetry techniques that allow individual fish approaching an impediment to be monitored.
It covers studies using fish that have been electronically tagged with acoustic, passive integrated transponder or radio tags in order to provide a variety of defined passage efficiency metrics and includes both upstream and downstream passage of fish.
It provides recommendations ...view more