75.080 - Petroleum products in general

This document specifies Procedure A, using manual glass viscometers, and Procedure B, using glass
capillary viscometers in an automated assembly, for the determination of the kinematic viscosity, ν,
of liquid petroleum products, both transparent and opaque, by measuring the time for a volume of
liquid to flow under gravity through a calibrated glass capillary viscometer. The dynamic viscosity, η,
is obtained by multiplying the measured kinematic viscosity by the density, ρ, of the liquid. Th...view more

This document specifies Procedure A, using manual glass viscometers, and Procedure B, using glass capillary viscometers in an automated assembly, for the determination of the kinematic viscosity, ν, of liquid petroleum products, both transparent and opaque, by measuring the time for a volume of liquid to flow under gravity through a calibrated glass capillary viscometer. The dynamic viscosity, η, is obtained by multiplying the measured kinematic viscosity by the density, ρ, of the liquid. The ra...view more

This document specifies a procedure for the determination of kinematic viscosity (ν) at 40 °C in the range from 2 mm2/s to 6 mm2/s by calculation from dynamic viscosity (η) and density (ρ) of middle distillate fuels, fatty acid methyl ester fuels (FAME) and mixtures of these using the Stabinger type viscometer. The result obtained using the procedure described in this document depends on the rheological behaviour of the sample. This document is predominantly applicable to liquids whose shear str...view more

This document establishes an overview of test methods in the field to determine flash point and combustibility of petroleum and related products. It presents advice on application and specification development. This document is not intended to be a comprehensive manual on flash point and combustibility tests, and the interpretation of test results, however it covers the key aspects on these subjects.

ISO  14935 specifies a method for the assessment of the persistence of a flame applied to the edge of a wick of non-flammable material immersed in fire-resistant fluid.This test does not determine the behaviour of a spray of fire-resistant fluid.

This document specifies a method for the assessment of the persistence of a flame applied to the edge of a wick of non-flammable material immersed in fire-resistant fluid. This test does not determine the behaviour of a spray of fire-resistant fluid. NOTE Such test methods are specified in ISO 15029-1 and ISO 15029-2. This document specifies one of four basic tests for determining flammability. This document does not apply to certain liquids such as HFAE and HFAS liquids.

This International Standard specifies the methodology for the regular monitoring of the test method
precision achieved versus precision published in the standard test method using data from Proficiency
Testing Programs (PTP) supported by the regular users of standard test methods.
The procedures in this International Standard are designed specifically for PTPs conducted on standard
test methods for petroleum and petroleum related products, which are presumed to be homogeneous.
The procedure...view more

This document specifies the methodology for the regular monitoring of the test method precision achieved versus the precision published in the standard test method using data from proficiency testing schemes (PTSs) supported by the regular users of standard test methods.
The procedures in this document are designed specifically for proficiency testing (PT) conducted on standard test methods, having a published reproducibility, for petroleum and petroleum-related products, which are presumed to ...view more

This document specifies the methodology for the regular monitoring of the test method precision achieved versus the precision published in the standard test method using data from proficiency testing schemes (PTSs) supported by the regular users of standard test methods. The procedures in this document are designed specifically for proficiency testing (PT) conducted on standard test methods, having a published reproducibility, for petroleum and petroleum-related products, which are presumed to b...view more

This document specifies the methodology for the application of precision estimates of a test method
derived from ISO 4259-1. In particular, it defines the procedures for setting the property specification
limits based upon test method precision where the property is determined using a specific test method,
and in determining the specification conformance status when there are conflicting results between
supplier and receiver. Other applications of this test method precision are briefly descr...view more

This document specifies the methodology for the design of an Interlaboratory Study (ILS) and
calculation of precision estimates of a test method specified by the study. In particular, it defines the
relevant statistical terms (Clause 3), the procedures to be adopted in the planning of ILS to determine
the precision of a test method (Clause 4), and the method of calculating the precision from the results of
such a study (Clauses 5 and 6).
The procedures in this document have been designed sp...view more

This document specifies the methodology for the application of precision estimates of a test method
derived from ISO 4259-1. In particular, it defines the procedures for setting the property specification
limits based upon test method precision where the property is determined using a specific test method,
and in determining the specification conformance status when there are conflicting results between
supplier and receiver. Other applications of this test method precision are briefly descr...view more

This document specifies the methodology for the design of an Interlaboratory Study (ILS) and
calculation of precision estimates of a test method specified by the study. In particular, it defines the
relevant statistical terms (Clause 3), the procedures to be adopted in the planning of ILS to determine
the precision of a test method (Clause 4), and the method of calculating the precision from the results of
such a study (Clauses 5 and 6).
The procedures in this document have been designed sp...view more

This document specifies a wavelength-dispersive X-ray fluorescence (WDXRF) test method for the determination of the sulfur content of liquid, homogeneous automotive fuels from 5 mg/kg to 500 mg/kg, which have a maximum oxygen content of 3,7 % (m/m). This product range covers:
— diesel fuels containing up to about 30 % (V/V) fatty acid methyl esters (FAME),
— motor gasolines containing up to about 10 % (V/V) ethanol,
— synthetic fuels such as hydrotreated vegetable oil (HVO) and gas to liquid ...view more

This document specifies a method for the determination of the boiling range distribution of petroleum products. The method is applicable to petroleum products and fractions with a final boiling point of 538 °C or lower at atmospheric pressure as determined by this document. This document does not apply to gasoline samples or gasoline components. The method is limited to products having a boiling range greater than 55 °C and having a vapour pressure sufficiently low to permit sampling at ambient ...view more

This document specifies a method for the determination of the boiling range distribution of petroleum products. The method is applicable to petroleum products and fractions with a final boiling point of 538 °C or lower at atmospheric pressure as determined by this document. This document does not apply to gasoline samples or gasoline components. The method is limited to products having a boiling range greater than 55 °C and having a vapour pressure sufficiently low to permit sampling at ambient ...view more