This document provides guidelines and requirements for the determination of aerosol particle number size distribution by means of the analysis of electrical mobility of aerosol particles. This measurement is usually called "differential electrical mobility analysis for aerosol particles". This analytical method is applicable to particle size measurements ranging from approximately 1 nm to 1 µm. This document does not address the specific instrument design or the specific requirements of particle...view more

    • sale 15% off
    • Draft
      92 pages
      English language
    • sale 15% off
    • Standard
      92 pages
      English language

This document specifies a method for the application of small-angle X-ray scattering (SAXS) to the estimation of mean particle sizes in the 1 nm to 100 nm size range. It is applicable in dilute dispersions where the interaction and scattering effects between the particles are negligible. This document describes several data evaluation methods: the Guinier approximation, model-based data fitting, Monte-Carlo?based data fitting, the indirect Fourier transform method and the expectation maximizatio...view more

    • sale 15% off
    • Standard
      27 pages
      English language
    • sale 15% off
    • Draft
      30 pages
      English language

This document describes the specifications for spherical polydisperse particulate reference materials with acceptable uncertainty in particle size distribution and describes protocols for their characterization. One potential use of these reference materials is the reliability test of the laser-diffraction instruments and other particle sizing methods. This document expresses polydispersity and the related uncertainties in size. Small variations in size can imply large variations in cumulative d...view more

    • sale 15% off
    • Standard
      16 pages
      English language
    • sale 15% off
    • Draft
      16 pages
      English language

This document provides practical guidance for performing and interpreting measurements using dynamic light scattering (DLS) that goes beyond the treatment of measurement artefacts in ISO 22412:2017. This document is intended to help users with experiments planning, in particular with respect to obtaining the necessary information on the sample and deciding whether DLS is the most appropriate method. It provides information on how to prepare samples in an appropriate way, verify the proper functi...view more

    • sale 15% off
    • Technical report
      21 pages
      English language

This document provides guidance on instrument qualification and size distribution measurement of particles in many two-phase systems (e.g. powders, sprays, aerosols, suspensions, emulsions and gas bubbles in liquids) through the analysis of their light-scattering properties. It does not address the specific requirements of particle size measurement of specific materials. This document is applicable to particle sizes ranging from approximately 0,1 µm to 3 mm. With special instrumentation and cond...view more

    • sale 15% off
    • Standard
      59 pages
      English language

This document describes a calibration and verification method for a light extinction liquid-borne particle counter (LELPC), which is used to measure the size and particle number concentration of particles suspended in liquid. The light extinction method described in this document is based on single particle measurements. The typical size range of particles measured by this method is between 1 µm and 100 µm in particle size. The method is applicable to instruments used for the evaluation of the c...view more

    • sale 15% off
    • Standard
      18 pages
      English language

This document describes a calibration and verification method for a light scattering liquid-borne particle counter (LSLPC), which is used to measure the size and particle number concentration of particles suspended in liquid. The light scattering method described in this document is based on single particle measurements. The typical size range of particles measured by this method is between 0,1 µm and 10 µm in particle size. The method is applicable to instruments used for the evaluation of the ...view more

    • sale 15% off
    • Standard
      21 pages
      English language
    • sale 15% off
    • Standard
      5 pages
      English language

This document specifies an in situ method for the determination of the density of solid particles or liquid droplets (herein referred to as "particle") dispersed in liquid continuous phase. The method is based on direct experimental determination of particle velocity in these liquids or media in gravitational or centrifugal fields based on Stokes law. The particle density is calculated from experimentally determined particle velocities in different liquids or media, taking into account their dyn...view more

    • sale 15% off
    • Standard
      20 pages
      English language

This document addresses the zeta-potential measurement operation for applications such as new product design, optimization of existing products, quality control during processing and/or during usage of the product. It does not provide a complete procedure for zeta-potential measurements. The instructions and key points addressed in this document are considered useful for performing zeta-potential measurements as specified in ISO 13099-1 and ISO 13099-2.

    • sale 15% off
    • Technical report
      10 pages
      English language

This document describes a calibration and verification method for a light scattering airborne particle counter (LSAPC), which is used to measure the size distribution and particle number concentration of particles suspended in air. The light scattering method described in this document is based on single particle measurements. The typical size range of particles measured by this method is between 0,1 μm and 10 μm in particle size. Instruments that conform to this document are used for the classi...view more

    • sale 15% off
    • Standard
      25 pages
      English language

ISO 18747-1:2018 specifies a method for the determination of the density of solid particles or liquid droplets (below referred to generically as "particles") dispersed in a liquid. The method is based on the fact that a particle wholly immersed in fluid experiences buoyancy equal to the weight of the fluid displaced by this particle (Archimedean principle), and if its mass force matches the buoyant force, it stops gravitational or centrifugal settling/creaming and the particle remains suspended....view more

    • sale 15% off
    • Standard
      28 pages
      English language
    • sale 15% off
    • Standard
      2 pages
      English language
    • sale 15% off
    • Standard
      2 pages
      French language

ISO/TR 14411-1:2017 describes the preparation of polydisperse spherical particles based on a picket fence of quasi-monodisperse reference materials, the characterization of its monodisperse components with acceptable uncertainty and the estimation of the uncertainty of the mixture of these particles. This type of material is normally suitable for all particle characterization methods within the appropriate limits of the techniques. An example of using these reference materials in a reliability c...view more

    • sale 15% off
    • Technical specification
      29 pages
      English language

ISO 20998-3:2017 gives guidelines for ultrasonic attenuation spectroscopy methods for determining the size distributions of one or more material phases dispersed in a liquid at high concentrations, where the ultrasonic attenuation spectrum is not a linear function of the particle volume fraction. In this regime, particle-particle interactions are not negligible. ISO 20998-3:2017 is applicable to colloids, dispersions, slurries, and emulsions. The typical particle size for such analysis ranges fr...view more

    • sale 15% off
    • Standard
      24 pages
      English language

ISO 22412:2017 specifies the application of dynamic light scattering (DLS) to the measurement of average hydrodynamic particle size and the measurement of the size distribution of mainly submicrometre-sized particles, emulsions or fine bubbles dispersed in liquids. DLS is also referred to as "quasi-elastic light scattering (QELS)" and "photon correlation spectroscopy (PCS)," although PCS actually is one of the measurement techniques. ISO 22412:2017 is applicable to the measurement of a broad ran...view more

    • sale 15% off
    • Standard
      34 pages
      English language

ISO 19430:2016 describes the evaluation of the number?based particle size distribution in liquid dispersions (solid, liquid or gaseous particles suspended in liquids) using the particle tracking analysis method for diffusion velocity measurements.

    • sale 15% off
    • Standard
      25 pages
      English language
    • sale 15% off
    • Standard
      25 pages
      English language

ISO 3310-1:2016 specifies the technical requirements and corresponding test methods for test sieves of metal wire cloth. It applies to test sieves having aperture sizes from 125 mm down to 20 µm, in accordance with ISO 565.

    • sale 15% off
    • Standard
      15 pages
      English language
    • sale 15% off
    • Standard
      15 pages
      English language
    • sale 15% off
    • Standard
      16 pages
      French language

ISO 15901-1:2016 describes a method for the evaluation of the pore size distribution and the specific surface area of pores in solids by mercury porosimetry according to the method of Ritter and Drake[1][2]. It is a comparative test, usually destructive due to mercury contamination, in which the volume of mercury penetrating a pore or void is determined as a function of an applied hydrostatic pressure, which can be related to a pore diameter. Practical considerations presently limit the maximum ...view more

    • sale 15% off
    • Standard
      19 pages
      English language
    • sale 15% off
    • Standard
      19 pages
      English language

ISO 27891:2015 describes methods to determine the detection efficiency of condensation particle counters (CPCs) at particle number concentrations ranging between 1 cm-3 and 105 cm-3, together with the associated measurement uncertainty. In general, the detection efficiency will depend on the particle number concentration, the particle size, and the particle composition. The particle sizes covered by the methods described in this International Standard range from approximately 5 nm to 1 000 nm. T...view more

    • sale 15% off
    • Standard
      119 pages
      English language