37.040.01 - Photography in general

ISO/TS 19264-1:2017 describes a method for analysing imaging systems quality in the area of cultural heritage imaging. The method described analyses multiple imaging systems quality characteristics from a single image of a specified test target. The specification states which characteristics are measured, how they are measured, and how the results of the analysis need to be presented. ISO/TS 19264-1:2017 applies to scanners and digital cameras used for digitization of cultural heritage material....view more

ISO/TR 19263-1:2017 specifies how to perform quality analysis of imaging systems (e.g. flatbed scanners, planetary scanners, or digital still cameras) used for digitization of reflective two-dimensional originals. Original materials include but are not limited to books, textual documents, drawings, prints, photographs, and paintings. Certain types of two-dimensional materials with complex surface geometry and or highly reflective surface elements require special illumination techniques that can ...view more

ISO 19262:2015 defines terms used in the area of imaging system capability qualification for archival recording and approval. Only terms related to this area are included. These terms are relevant to the current tasks or are of general interest in imaging system capability qualification for archival recording and approval.

ISO 17850:2015 specifies a protocol to measure geometric distortion of a digital camera. It is applicable to the measurement of digital cameras including camera phones.

ISO 17957:2015 defines a method for measuring shading for digital cameras (including camera phones). The method includes procedures for measuring colour and luminance signal components separately.

This part of ISO 20462 specifies: a) the nature of a quality ruler; b) hardcopy and softcopy implementations of quality rulers; c) how quality rulers may be generated or obtained; and d) the standard quality scale (SQS), a fixed numerical scale that may be measured using quality rulers.

1 Scope
This International Standard defines terms used in electronic still picture imaging.
Only terms related to electronic still picture imaging are defined. These terms are relevant to current tasks or are of general interest in electronic still picture imaging.

ISO 20462-3:2012 specifies: the nature of a quality ruler; hardcopy and softcopy implementations of quality rulers; how quality rulers may be generated or obtained; and the standard quality scale (SQS), a fixed numerical scale that may be measured using quality rulers.

This part of ISO 20462 defines a standard psychophysical experimental method for subjective image quality assessment of soft copy and hard copy still picture images.

This part of ISO 20462 is part of a multiple-part standard pertaining to the subjective evaluation of pictorial still image quality. This part of ISO 20462 a) defines the units by which image quality is quantified (just noticeable differences, or JNDs); b) describes the influence of stimulus properties, observer characteristics, and task instructions on results obtained from rating experiments; c) provides a flow chart for choosing the preferred psychophysical method for determining image qualit...view more

This International Standard specifies viewing conditions for images on both reflective and transmissive media, such as prints (both photographic and photomechanical) and transparencies, as well as images displayed in isolation on colour monitors.
This International Standard applies in particular to:
⎯critical comparison between transparencies, reflection photographic or photomechanical prints and/or other objects or images;
⎯appraisal of the tone reproduction and colourfulness of prints and...view more

This International Standard specifies the documentation requirements for certified reference materials (CRMs), procedures for the use of CRMs, and procedures for the computation and reporting of the combined standard uncertainty of reflectance and transmittance measurement systems used in graphic arts, photographic and other imaging industries.

This part of ISO 5 specifies the geometric conditions for measuring ISO 5 standard diffuse and f/4,5 and f/1,6 projection transmittance densities. ISO 5 standard diffuse density is primarily applicable to measurements of photographic images to be viewed on a transparency illuminator, or viewing box, to be contact printed, or to be projected with a system employing diffuse illumination. ISO 5 standard projection density is primarily applicable to measurements of photographic images to be projecte...view more

This part of ISO 5 establishes terms, symbols, functional notations and a coordinate system to describe geometric and spectral conditions for the measurement of the degree to which a specimen modulates radiant flux for applications in photography, graphic technology, and radiometry. This part of ISO 5 primarily provides a system for describing methods of measuring or specifying the transmission and reflection properties of photographic and graphic arts materials. The geometric and spectral condi...view more

This part of ISO 5 specifies the geometric conditions for the definition of ISO 5 standard reflection density. It also recommends tolerances on geometric conditions that can be used in the design of instruments. The spectral conditions are specified in ISO 5-3. This part of ISO 5 also specifies the requirements for polarization (if that feature is included) and for backing material, and makes recommendations regarding accuracy and linearity. Although intended primarily for use in the measurement...view more

This part of ISO 5 specifies spectral conditions and computational procedures for the definition of several types of ISO 5 standard densities used in imaging applications in photography and graphic technology.

ISO 5-1:2009 establishes terms, symbols, functional notations and a coordinate system to describe geometric and spectral conditions for the measurement of the degree to which a specimen modulates radiant flux for applications in photography, graphic technology, and radiometry. ISO 5-1:2009 primarily provides a system for describing methods of measuring or specifying the transmission and reflection properties of photographic and graphic arts materials. The geometric and spectral conditions associ...view more

ISO 5-4:2009 specifies the geometric conditions for the definition of ISO 5 standard reflection density. It also recommends tolerances on geometric conditions that can be used in the design of instruments. The spectral conditions are specified in ISO 5-3. ISO 5-4:2009 also specifies the requirements for polarization (if that feature is included) and for backing material, and makes recommendations regarding accuracy and linearity. Although intended primarily for use in the measurement of the refl...view more

ISO 5-3:2009 specifies spectral conditions and computational procedures for the definition of several types of ISO 5 standard densities used in imaging applications in photography and graphic technology.

ISO 5-2:2009 specifies the geometric conditions for measuring ISO 5 standard diffuse and ƒ/4,5 and ƒ/1,6 projection transmittance densities. ISO 5 standard diffuse density is primarily applicable to measurements of photographic images to be viewed on a transparency illuminator, or viewing box, to be contact printed, or to be projected with a system employing diffuse illumination. ISO 5 standard projection density is primarily applicable to measurements of photographic images to be projected with...view more