This part of this standard specifies the technical delivery conditions for electric welded and submerged arc welded cold formed structural steel hollow sections for mechanical engineering purposes of circular, square, rectangular or elliptical forms and applies to structural hollow sections formed cold without subsequent heat treatment other than the heat treatment of the weld line.
NOTE 1   The requirements for tolerances, dimensions and sectional properties can be found in EN 10219-2.
NOTE 2   T...
view more

    • sale 10% off
    • Standard
      43 pages
      English language
    • e-Library read for
      1 day
    • sale 10% off
    • Standard
      43 pages
      English language
    • e-Library read for
      1 day
    • sale 10% off
    • Draft
      45 pages
      English language
    • e-Library read for
      1 day

This part of EN 10225 specifies requirements for weldable structural steels made of hot finished seamless and high frequency welded hollow sections to be used in the fabrication of fixed offshore structures.
Following thickness limitations are given in this standard:
-   for seamless hollow sections up to and including 65 mm;
-   for HFW hollow sections up to and including 25,4 mm.
Greater thicknesses may be agreed, provided the technical requirements of this European Standard are maintained.
T...
view more

    • sale 10% off
    • Standard
      60 pages
      English language
    • e-Library read for
      1 day

This part of EN 10225 specifies requirements for weldable structural steels to be used in the fabrication of fixed offshore structures in the form of sections (e.g. H-, I-, Z-sections, U-channels, angles and tees) excluding hollow sections. The thickness limitation in this standard is up to and including 63 mm.
For steel qualities with mechanical properties in the transverse direction (named xL2O) sections with flange widths smaller than 180 mm and channels with flange smaller widths than 90 mm...
view more

    • sale 10% off
    • Standard
      44 pages
      English language
    • e-Library read for
      1 day

This part of EN 10225 specifies requirements for submerged arc welded (SAW) and high frequency welded (HFW) cold formed hollow sections to be used in the fabrication of fixed offshore structures.
The thickness limit for SAWL round hollow sections is up to and including 50,8 mm, for HFW round hollow sections up to and including 25,4 mm and for HFW rectangular hollow sections up to and including 12,5 mm.
Greater thicknesses for SAWL hollow sections may be agreed provided the technical requiremen...
view more

    • sale 10% off
    • Standard
      69 pages
      English language
    • e-Library read for
      1 day

This part of prEN 10210 specifies tolerances for hot finished circular, square, rectangular and elliptical structural hollow sections, manufactured in wall thicknesses up to 120 mm, in the following size ranges:
Circular: Outside diameters up to 2 500 mm
Square: Outside dimensions up to 800 mm x 800 mm
Rectangular: Outside dimensions up to 750 mm x 500 mm
Elliptical: Outside dimensions up to 500 mm x 250 mm
The formulae for calculating sectional properties of sections manufactured to the d...
view more

    • sale 10% off
    • Standard
      43 pages
      English language
    • e-Library read for
      1 day

This part of prEN 10219 specifies tolerances for cold formed welded circular, square, rectangular and elliptical structural hollow sections, manufactured in wall thicknesses up to 40 mm, in the following size ranges:
Circular: Outside diameters up to 2 500 mm
Square: Outside dimensions up to 500 mm x 500 mm
Rectangular: Outside dimensions up to 500 mm x 300 mm
Elliptical: Outside dimensions up to 480 mm x 240 mm
The formulae for calculating sectional properties of sections manufactured to ...
view more

    • sale 10% off
    • Standard
      44 pages
      English language
    • e-Library read for
      1 day

This document specifies deformation properties perpendicular to the surface of the product.
This document may be applied as a supplement to all product standards for flat products and sections of fully killed steels, except stainless steels. It covers products having a nominal thickness (t) between 15 mm and 400 mm of steels with a specified minimum upper yield strength ReH or proof strength Rp0,2 ≤ 960 MPa ) for which improved through thickness properties are required.
This document may be ap...
view more

    • sale 10% off
    • Standard
      16 pages
      English language
    • e-Library read for
      1 day

This European Standard specifies requirements for the nominal dimensions of hot-rolled equal and unequal leg angles. This European Standard does not apply to angles with square roots. These requirements do not apply to equal and unequal leg angles rolled from stainless steel.

    • sale 10% off
    • Standard
      21 pages
      English language
    • e-Library read for
      1 day

This European Standard specifies the nominal dimensions and masses of the hot rolled steel channels, I and H sections.
The following shapes are covered by this European Standard:
Sections:
-   Parallel flange I sections IPE
-   Wide flange beams HE
-   Extra wide flange beams HL
-   Wide flange columns HD
-   Wide flange bearing piles HP and UBP
-   Universal beams UB
-   Universal columns UC
-   Taper flange I sections IPN and J
Channels:
-   Parallel flange channels UPE and PFC
-   Taper flange chann...
view more

    • sale 10% off
    • Standard
      33 pages
      English language
    • e-Library read for
      1 day

This European Standard specifies requirements for the nominal dimensions of hot-rolled equal and unequal leg angles. This European Standard does not apply to angles with square roots. These requirements do not apply to equal and unequal leg angles rolled from stainless steel.

    • sale 10% off
    • Standard
      21 pages
      English language
    • e-Library read for
      1 day

This European standard specifies the nominal dimensions and masses of the hot rolled steel channels, I and H sections.
The following shapes are covered by this standard:
Sections:
-   Parallel flange I sections IPE;
-   Wide flange beams HE;
-   Extra wide flange beams HL and HLZ;
-   Wide flange columns HD;
-   Wide flange bearing piles HP and UBP;
-   Universal beams UB;
-   Universal columns UC;
-   Taper flange I sections IPN and J.
Channels:
-   Parallel flange channels UPE and PFC;
-   Taper flan...
view more

    • sale 10% off
    • Standard
      33 pages
      English language
    • e-Library read for
      1 day

This document specifies the characteristics of metal framing components (e.g profiles, hangers and connectors) intended to be used in building construction works in conjunction with gypsum boards manufactured according to EN 520, EN 15283-1 and EN 15283-2. Secondary processing conforming to EN 14190 where the assembly is non-loadbearing. These include, for example, partitions, wall and ceiling linings, ceilings with mechanically fixed boards and the cladding of beams, columns, ducts and shafts. ...view more

    • sale 10% off
    • Draft
      39 pages
      English language
    • e-Library read for
      1 day
    • sale 10% off
    • Standard
      45 pages
      English language
    • e-Library read for
      1 day

This European Standard specifies the characteristics of metal framing components (e.g. profiles, hangers and connectors) intended to be used in building construction works in conjunction with gypsum boards manufactured according to EN 520, EN 15283 1 and EN 15283 2 and gypsum board products from reprocessing conforming to EN 14190 where the assembly is non-loadbearing. Such assemblies include, for example, partitions, wall and ceiling linings, ceilings with mechanically fixed boards and the clad...view more

    • sale 10% off
    • Draft
      39 pages
      English language
    • e-Library read for
      1 day
    • sale 10% off
    • Standard
      45 pages
      English language
    • e-Library read for
      1 day

ISO 630-6:2014 specifies qualities for seismic-proof improved structural steels. It applies to steel plates with thicknesses of 6 mm or over and up to 125 mm, wide flats and hot-rolled sections up to 140 mm, which are used in the usual delivery conditions as given in 6.2 and normally intended for welded or bolted structures. It does not include the following structural steels, certain of which are covered by other International Standards: sheet and strip ? refer to ISO TC 17/SC 12, Continuous mi...view more

    • sale 15% off
    • Standard
      16 pages
      English language

ISO 7452:2013 specifies requirements for tolerances for hot-rolled steel plates made on a reversing mill with the following characteristics: nominal thickness: 3 mm ≤ t ≤ 400 mm; nominal width: w ≥ 600 mm. ISO 7452:2013 does not apply to stainless steel. ISO 7452:2013 does not include continuous mill products, custom-made plate, checker plate or bulb plate for flooring or wide flats.

    • sale 15% off
    • Standard
      14 pages
      English language

This European Standard specifies requirements for the properties of non-alloy carbon zinc or zinc alloy coated steel wire used primarily for the armouring of either subterranean land power or telecommunication cables.

    • sale 10% off
    • Draft
      9 pages
      English language
    • e-Library read for
      1 day
    • sale 10% off
    • Standard
      10 pages
      English language
    • e-Library read for
      1 day

CMC - Modification to Clause 2

    • sale 10% off
    • Corrigendum
      2 pages
      English, French and German language
    • e-Library read for
      1 day

This part of this European Standard specifies technical delivery conditions for hot finished hollow sections of circular, square, rectangular or elliptical forms and applies to hollow sections formed hot, with or without subsequent heat treatment, or formed cold with subsequent heat treatment to obtain equivalent metallurgical conditions to those obtained in the hot formed product.
Requirements for tolerances, dimensions and sectional properties are contained in EN 10210-2.
NOTE   A range of ma...
view more

    • sale 10% off
    • Standard
      38 pages
      English language
    • e-Library read for
      1 day

This part of this European Standard specifies the technical delivery conditions for cold formed welded structural hollow sections of circular, square or rectangular forms and applies to structural hollow sections formed cold without subsequent heat treatment.
Requirements for tolerances, dimensions and sectional properties are contained in EN 10219-2.
NOTE   A range of steel grades is specified in this European Standard and the user should select the grade appropriate to the intended use and ser...
view more

    • sale 10% off
    • Standard
      35 pages
      English language
    • e-Library read for
      1 day