This part of this European Standard specifies technical delivery conditions for hot-finished seamless, electric welded and submerged arc welded steel structural hollow sections for mechanical engineering purposes of circular, square, rectangular or elliptical forms.
It applies to hollow sections formed hot, with or without subsequent heat treatment, or formed cold with subsequent heat treatment above 580 °C to obtain equivalent mechanical properties to those obtained in the hot formed product....
view more

    • sale 10% off
    • Standard
      43 pages
      English language
    • e-Library read for
      1 day
    • sale 10% off
    • Draft
      46 pages
      English language
    • e-Library read for
      1 day

This part of this standard specifies the technical delivery conditions for electric welded and submerged arc welded cold formed structural steel hollow sections for mechanical engineering purposes of circular, square, rectangular or elliptical forms and applies to structural hollow sections formed cold without subsequent heat treatment other than the heat treatment of the weld line.
NOTE 1   The requirements for tolerances, dimensions and sectional properties can be found in EN 10219-2.
NOTE 2   T...
view more

    • sale 10% off
    • Standard
      43 pages
      English language
    • e-Library read for
      1 day
    • sale 10% off
    • Standard
      43 pages
      English language
    • e-Library read for
      1 day
    • sale 10% off
    • Draft
      45 pages
      English language
    • e-Library read for
      1 day

Part 2 of this document, in addition to Part 1, specifies the technical delivery conditions for flat and long products and semi-finished products which are meant for further processing to flat and long products of hot rolled non-alloy quality steels in the grades and qualities given in Tables 2 to 6 (chemical composition) and Tables 7 to 9 (mechanical properties) in the delivery conditions as given in 6.3. Three engineering steels are also specified in this document (see Tables 3 and 5) (chemica...view more

    • sale 10% off
    • Standard
      41 pages
      English language
    • e-Library read for
      1 day
    • sale 10% off
    • Draft
      41 pages
      English language
    • e-Library read for
      1 day

This document specifies the technical delivery conditions for flat and long products as well as semi-finished products which are meant for further processing to flat and long products of hot rolled non-alloy quality steels in the grades and qualities given in Tables 1 to 5 (chemical composition) and Tables 6 to 8 (mechanical properties) in the usual delivery conditions as given in 6.3. Three engineering steels are also specified in this document (see Tables 2 and 4) (chemical composition) and Ta...view more

    • sale 10% off
    • Standard
      41 pages
      English language
    • e-Library read for
      1 day
    • sale 10% off
    • Draft
      41 pages
      English language
    • e-Library read for
      1 day

This part of prEN 10219 specifies tolerances for cold formed welded circular, square, rectangular and elliptical structural hollow sections, manufactured in wall thicknesses up to 40 mm, in the following size ranges:
Circular: Outside diameters up to 2 500 mm
Square: Outside dimensions up to 500 mm x 500 mm
Rectangular: Outside dimensions up to 500 mm x 300 mm
Elliptical: Outside dimensions up to 480 mm x 240 mm
The formulae for calculating sectional properties of sections manufactured to ...
view more

    • sale 10% off
    • Standard
      44 pages
      English language
    • e-Library read for
      1 day

This part of prEN 10210 specifies tolerances for hot finished circular, square, rectangular and elliptical structural hollow sections, manufactured in wall thicknesses up to 120 mm, in the following size ranges:
Circular: Outside diameters up to 2 500 mm
Square: Outside dimensions up to 800 mm x 800 mm
Rectangular: Outside dimensions up to 750 mm x 500 mm
Elliptical: Outside dimensions up to 500 mm x 250 mm
The formulae for calculating sectional properties of sections manufactured to the d...
view more

    • sale 10% off
    • Standard
      43 pages
      English language
    • e-Library read for
      1 day

ISO 683-1:2016 specifies the technical delivery requirements for
- semi-finished products, hot formed, e.g. blooms, billets, slabs (see Note 1),
- bars (see Note 1),
- wire rod,
- finished flat products, and
- hammer or drop forgings (see Note 1)
manufactured from the direct hardening non-alloy steels and the non-alloy flame- and induction-hardening steels listed in Table 3 and supplied in one of the heat-treatment conditions given for the different types of products in Table 1 and in one ...
view more

    • sale 10% off
    • Standard
      48 pages
      English language
    • e-Library read for
      1 day

ISO 683-1:2016 specifies the technical delivery requirements for
- semi-finished products, hot formed, e.g. blooms, billets, slabs (see Note 1),
- bars (see Note 1),
- wire rod,
- finished flat products, and
- hammer or drop forgings (see Note 1)
manufactured from the direct hardening non-alloy steels and the non-alloy flame- and induction-hardening steels listed in Table 3 and supplied in one of the heat-treatment conditions given for the different types of products in Table 1 and in one ...
view more

    • sale 10% off
    • Standard
      48 pages
      English language
    • e-Library read for
      1 day

ISO 683-2:2016 specifies the technical delivery requirements for
- semi-finished products, hot formed, e.g. blooms, billets, slabs (see Note 1),
- bars (see Note 1),
- wire rod,
finished flat products, and
- hammer or drop forgings (see Note 1)
manufactured from the direct hardening alloy steels and the alloy flame- and induction-hardening steels listed in Table 3 and supplied in one of the heat-treatment conditions given for the different types of products in Table 1 and in one of the sur...
view more

    • sale 10% off
    • Standard
      49 pages
      English language
    • e-Library read for
      1 day

ISO 683-1:2016 specifies the technical delivery requirements for - semi-finished products, hot formed, e.g. blooms, billets, slabs (see Note 1), - bars (see Note 1), - wire rod, - finished flat products, and - hammer or drop forgings (see Note 1) manufactured from the direct hardening non-alloy steels and the non-alloy flame- and induction-hardening steels listed in Table 3 and supplied in one of the heat-treatment conditions given for the different types of products in Table 1 and in one of the...view more

    • sale 15% off
    • Standard
      39 pages
      English language
    • sale 15% off
    • Standard
      41 pages
      French language
    • sale 15% off
    • Standard
      39 pages
      English language

ISO 683-2:2016 specifies the technical delivery requirements for - semi-finished products, hot formed, e.g. blooms, billets, slabs (see Note 1), - bars (see Note 1), - wire rod, finished flat products, and - hammer or drop forgings (see Note 1) manufactured from the direct hardening alloy steels and the alloy flame- and induction-hardening steels listed in Table 3 and supplied in one of the heat-treatment conditions given for the different types of products in Table 1 and in one of the surface c...view more

    • sale 15% off
    • Standard
      40 pages
      English language
    • sale 15% off
    • Standard
      40 pages
      French language
    • sale 15% off
    • Standard
      40 pages
      English language

ISO 683-18:2014 specifies the technical delivery requirements for bright steel bars in the drawn or peeled/turned condition and they are intended for mechanical purposes, for example for machine parts. The bright bars are subdivided into the following steel types: a) non-alloy general engineering steels; b) non-alloy free-cutting steels; c) non-alloy and alloy case-hardening steels; d) non-alloy and alloy steels for quenching and tempering; e) stainless steels. In addition ISO 683-18:2014, the g...view more

    • sale 15% off
    • Standard
      59 pages
      English language

This part of this European Standard specifies round and shaped non alloyed steel wire for use in the manufacture of ropes for mine hoisting, man-riding haulage, cableways for the transportation of passengers and other high duty applications. This part of this European Standard refers to round wires and three types of shaped wire: full lock (Z), half lock (H) and trapezoidal (T). In addition to the requirements of this part of this European Standard, the requirements of EN 10264-1 also apply. It ...view more

    • sale 10% off
    • Draft
      16 pages
      English language
    • e-Library read for
      1 day
    • sale 10% off
    • Standard
      15 pages
      English language
    • e-Library read for
      1 day

This part of this European Standard defines cold drawn non alloy steel wire used for the manufacture of: ⎯ Ropes for general applications and lifts; ⎯ Ropes for applications for which there is no specific EN standard. This part of this standard does not apply to steel wire taken from manufactured ropes. This part of this European standard specifies the following for cold drawn non alloy steel wire for ropes for general applications:
- dimensional tolerances;
- mechanical characteristics;
-...
view more

    • sale 10% off
    • Draft
      10 pages
      English language
    • e-Library read for
      1 day
    • sale 10% off
    • Standard
      10 pages
      English language
    • e-Library read for
      1 day

This European Standard specifies an inductively coupled plasma optical emission spectrometry routine method for the analysis of unalloyed and low alloyed steels, whose iron content shall be at least 95 %.
This method is applicable to the elements listed in Table 1 within the ranges shown.
Table 1 - Application ranges
(...)
In all cases, the ranges specified can be extended or adapted (after validation) for the determination of other mass fractions, provided that the iron content in the sampl...
view more

    • sale 10% off
    • Draft
      39 pages
      English language
    • e-Library read for
      1 day
    • sale 10% off
    • Standard
      44 pages
      English language
    • e-Library read for
      1 day

This part of ISO 15614 specifies how a preliminary welding procedure specification (pWPS) for production and repair welding of non-alloyed and low-alloyed cast irons is qualified by fusion welding procedure tests. This part of ISO 15614 defines the conditions for execution of the welding procedure tests and the range of qualification for welding procedures for all practical welding operations within the range of a defined list of variables. This part of ISO 15614 is applicable to all new welding...view more

    • sale 10% off
    • Standard
      25 pages
      English language
    • e-Library read for
      1 day
    • sale 10% off
    • Draft
      26 pages
      English language
    • e-Library read for
      1 day

1.1   This Part of EN 10253 specifies the technical delivery requirements for seamless and welded butt welding fittings (elbows, concentric and eccentric reducers, equal and reducing tees, caps) made of carbon and alloy steel which are intended for pressure purposes at room temperature, at low temperature or at elevated temperatures, and for the transmission and distribution of fluids and gases.
It specifies :
-   the type of fittings ;
-   type A : Butt-welding fittings with reduced pressure facto...
view more

    • sale 10% off
    • Standard
      125 pages
      English language
    • e-Library read for
      1 day

This Part of EN 10253 specifies the technical delivery requirements for seamless and welded butt welding fittings (elbows, concentric and eccentric reducers, equal and reducing tees, caps) made of carbon and alloy steel which are intended for pressure purposes at room temperature, at low temperature or at elevated temperatures, and for the transmission and distribution of fluids and gases.
It specifies:
-   type of fittings ;
-   type A : Butt-welding fittings with reduced pressure factor ;
-   ty...
view more

    • sale 10% off
    • Standard
      125 pages
      English language
    • e-Library read for
      1 day

This part of this European Standard specifies technical delivery conditions for hot finished hollow sections of circular, square, rectangular or elliptical forms and applies to hollow sections formed hot, with or without subsequent heat treatment, or formed cold with subsequent heat treatment to obtain equivalent metallurgical conditions to those obtained in the hot formed product.
Requirements for tolerances, dimensions and sectional properties are contained in EN 10210-2.
NOTE   A range of ma...
view more

    • sale 10% off
    • Standard
      38 pages
      English language
    • e-Library read for
      1 day

This part of this European Standard specifies the technical delivery conditions for cold formed welded structural hollow sections of circular, square or rectangular forms and applies to structural hollow sections formed cold without subsequent heat treatment.
Requirements for tolerances, dimensions and sectional properties are contained in EN 10219-2.
NOTE   A range of steel grades is specified in this European Standard and the user should select the grade appropriate to the intended use and ser...
view more

    • sale 10% off
    • Standard
      35 pages
      English language
    • e-Library read for
      1 day