iTeh Standards logo
EURUSD
Your shopping cart is empty.
CEN

EN 10163-1:2004/AC:2007

(Corrigendum)

Delivery requirements for surface condition of hot-rolled steel plates, wide flats and sections - Part 1: General requirements

Delivery requirements for surface condition of hot-rolled steel plates, wide flats and sections - Part 1: General requirements

CMC - Modification to Clause 2

Lieferbedingungen für die Oberflächenbeschaffenheit von warmgewalzten Stahlerzeugnissen (Blech, Breitflachstahl und Profile) - Teil 1: Allgemeine Anforderungen

Conditions de livraison relatives à l'état de surface des tôles, larges plats et profilés en acier laminés à chaud - Partie 1: Généralités

Zahteve za kakovost površine pri dobavi vroče valjane jeklene pločevine, širokih ploščatih izdelkov in profilov – 1. del: Splošne zahteve

General Information

Status
Published
Publication Date
20-Feb-2007
ICS
77.140.50 - Flat steel products and semi-products
77.140.70 - Steel profiles
Technical Committee
ECISS/TC 103 - Structural steels other than reinforcements
Drafting Committee
ECISS/TC 103 - Structural steels other than reinforcements
Current Stage
6060 - Definitive text made available (DAV) - Publishing
Start Date
21-Feb-2007
Completion Date
21-Feb-2007
Ref Project
SIST EN 10163-1:2005/AC:2007 - Delivery requirements for surface condition of hot-rolled steel plates, wide flats and sections - Part 1: General requirements

Relations

Corrects
EN 10163-1:2004 - Delivery requirements for surface condition of hot-rolled steel plates, wide flats and sections - Part 1: General requirements
Effective Date
22-Dec-2008
EN 10163-1:2005/AC:2007EN 10163-1:2005/AC:2007
PreviousNext
Corrigendum
EN 10163-1:2005/AC:2007
English, French and German language
2 pages
sale 10% off
Preview
sale 10% off
Preview
e-Library read for
1 day

Frequently Asked Questions

EN 10163-1:2004/AC:2007 is a corrigendum published by the European Committee for Standardization (CEN). Its full title is "Delivery requirements for surface condition of hot-rolled steel plates, wide flats and sections - Part 1: General requirements". This standard covers: CMC - Modification to Clause 2

CMC - Modification to Clause 2

EN 10163-1:2004/AC:2007 is classified under the following ICS (International Classification for Standards) categories: 77.140.50 - Flat steel products and semi-products; 77.140.70 - Steel profiles. The ICS classification helps identify the subject area and facilitates finding related standards.

EN 10163-1:2004/AC:2007 has the following relationships with other standards: It is inter standard links to EN 10163-1:2004. Understanding these relationships helps ensure you are using the most current and applicable version of the standard.

You can purchase EN 10163-1:2004/AC:2007 directly from iTeh Standards. The document is available in PDF format and is delivered instantly after payment. Add the standard to your cart and complete the secure checkout process. iTeh Standards is an authorized distributor of CEN standards.

Standards Content (Sample)


2003-01.Slovenski inštitut za standardizacijo. Razmnoževanje celote ali delov tega standarda ni dovoljeno.Delivery requirements for surface condition of hot-rolled steel plates, wide flats and sections - Part 1: General requirementsConditions de livraison relatives a l'état de surface des tôles, larges plats et profilés en acier laminés a chaud - Partie 1: GénéralitésLieferbedingungen für die Oberflächenbeschaffenheit von warmgewalzten Stahlerzeugnissen (Blech, Breitflachstahl und Profile) - Teil 1: Allgemeine AnforderungenTa slovenski standard je istoveten z:EN 10163-1:2004/AC:2007SIST EN 10163-1:2005/AC:2007en,fr,de77.140.70Jekleni profiliSteel profiles77.140.50SROL]GHONLFlat steel products and semi-productsICS:SLOVENSKI
STANDARDSIST EN 10163-1:2005/AC:200701-maj-2007

EUROPEAN STANDARDNORME EUROPÉENNEEUROPÄISCHE NORMEN 10163-1:2004/ACFebruary 2007Février 2007Februar 2007ICS 77.140.50; 77.140.70English versionVersion FrançaiseDeutsche FassungDelivery requirements for surface condition of hot-rolled steel plates, wideflats and sections - Part 1: General requirementsConditions de livraison relatives à l'état desurface des tôles, larges plats et profilés enacier laminés à chaud - Partie 1:GénéralitésLieferbedingungen für dieOberflächenbeschaffenheit vonwarmgewalzten Stahlerzeugnissen (Blech,Breitflachstahl und Profile) - Teil 1:Allgemeine AnforderungenThis corrigendum becomes effective on 21 February 2007 for incorporation in the three officiallanguage versions of the EN.Ce corrigendum prendra effet le 21 février 2007 pour incorporation dans les trois versionslinguistiques officielles de la EN.Die Berichtigung tritt am 21.Februar 2007 zur Einarbeitung in die drei offiziellen Sprachfassungen derEN in Kraft.EUROPEAN COMMITTEE FOR STANDARDIZATIONCOMITÉ EUROPÉEN DE NORMALISATIONEUROPÄISCHES KOMITEE FÜR NORMUNGManagement Centre: rue de Stassart, 36
B-1050 Brussels© 2007 CENAll rights of exploitation in any form and by any means reserved worldwide for CEN national Members.Tous droits d'exploitation sous quelque forme et de quelque manière que ce soit réservés dans le monde entier au
...

Questions, Comments and Discussion

Ask us and Technical Secretary will try to provide an answer. You can facilitate discussion about the standard in here.

Loading comments...

This May Also Interest You

CEN
EN 10379:2025(Main)
Steel sheet piles - Test methods
SIST EN 10379:2025

This document specifies the requirement for testing of special properties of hot-rolled steel sheet piles.

  • Standard
    16 pages
    English language
    sale 10% off
    e-Library read for
    1 day
CEN
EN 10164:2018(Main)
Steel products with improved deformation properties perpendicular to the surface of the product - Technical delivery conditions
SIST EN 10164:2018

This document specifies deformation properties perpendicular to the surface of the product.
This document may be applied as a supplement to all product standards for flat products and sections of fully killed steels, except stainless steels. It covers products having a nominal thickness (t) between 15 mm and 400 mm of steels with a specified minimum upper yield strength ReH or proof strength Rp0,2 ≤ 960 MPa ) for which improved through thickness properties are required.
This document may be applied to other steel types if agreed at the time of the order.
This document may be applied to products with thickness between 10 mm ≤ t <15 mm if agreed at the time of the order. See option 1.
This document may be applied to products with thickness t > 400 mm if agreed at the time of the order. See Option 2.

  • Standard
    16 pages
    English language
    sale 10% off
    e-Library read for
    1 day
CEN
EN 10163-1:2004(Main)
Delivery requirements for surface condition of hot-rolled steel plates, wide flats and sections - Part 1: General requirements
SIST EN 10163-1:2005

1.1   This European Standard specifies the general requirements for the surface condition of hot-rolled steel plates, wide flats and sections. It covers the requirements on the type, the permissible depth and the permissible size of the surface area affected by:
¾ discontinuities (imperfections ant defects) and
¾ repairs by grinding and/or welding.
1.2   This European Standard shall be applied so far as no other requirements for the surface condition exist in the appropriate material or product standard. The requirements laid down in the appropriate material or product standard shall always prevail.
1.3   This Part 1 of this European Standard covers the general delivery requirements for the surface condition of hot-rolled steel products such as:
¾ plates and wide flats, see Part 2;
¾ sections, see Part 3;

  • Standard
    13 pages
    English language
    sale 10% off
    e-Library read for
    1 day
CEN
EN 4315:2025(Main)
Aerospace series - Heat-resisting alloy X6NiCrTiMoV26-15 (1.4980) - Consumable electrode remelted - Solution treated and precipitation treated - Bars and sections - a or D ≤ 100 mm - Rm ≥ 900 MPa
kSIST FprEN 4315:2025

This document specifies the requirements relating to:
Heat-resisting alloy X6NiCrTiMoV26-15 (1.4980)
Consumable electrode remelted
Solution treated and precipitation treated
Bars and sections
a or D ≤ 100 mm
Rm ≥ 900 MPa
for aerospace applications.
W.nr: 1.4980.
ASD-STAN designation: FE-PA2601.

  • Draft
    9 pages
    English language
    sale 10% off
    e-Library read for
    1 day
CEN
EN 13126-10:2025(Main)
Building hardware - Hardware for windows and door height windows - Requirements and test methods - Part 10: Arm-balancing systems
kSIST FprEN 13126-10:2025

This document specifies requirements and test methods for durability, strength, security and function for arm-balancing systems for windows and door height windows - see Annex C.

  • Draft
    14 pages
    English language
    sale 10% off
    e-Library read for
    1 day
CEN
EN 4318:2025(Main)
Aerospace series - Heat-resisting alloy X6NiCrTiMoV26-15 (1.4980) - Consumable electrode remelted - Solution treated and precipitation treated - Bars and sections - De ≤ 100 mm - Rm ≥ 960 MPa
kSIST FprEN 4318:2025

This document specifies the requirements relating to:
Heat-resisting alloy X6NiCrTiMoV26-15 (1.4980)
Consumable electrode remelted
Solution treated and precipitation treated
Bars and sections
De ≤ 100 mm
Rm ≥ 960 MPa
for aerospace applications.
W.nr: 1.4980.
ASD-STAN designation: FE-PA2601.

  • Draft
    9 pages
    English language
    sale 10% off
    e-Library read for
    1 day
CEN
EN 9276:2025(Main)
Aerospace series - Programme management - Recommendations for the implementation of the integrated logistic support
kSIST FprEN 9276:2025

The purpose of this document is to:
—   identify and describe, in a structured way, the principles of the integrated logistic support (ILS) activities and tasks for the main types of stakeholders in the system life cycle, from the expression of need to disposal;
—   place the activities, tasks and ILS deliverables within the programme execution;
—   identify the main selection and sizing of activities and tasks criteria according to the nature and the requirements of the programme;
—   control the relations with the other aspects of programme management.
This document covers the following subjects:
—   management of ILS (definition, implementation and running of the processes);
—   expression of the support requirements;
—   elaboration of the contracts (e.g. for development, maintenance, supply);
—   implementation of the tasks and processes.
This document is also related to the following subjects:
—   relations with costs and lead times control, configuration management, performance and RAMS management, quality assurance, documentation management;
—   regulations (e.g. information system security, export controls, safety at work);
—   human and organizational factors (HOF);
—   environment (e.g. RoHS, REACh);
—   information systems (IS) and the links between them;
—   logistics information systems (LIS);
—   in-service support (ISS) activities;
—   configuration management of ILS objects;
—   life cycle.
The following stakeholders are concerned by ILS:
—   users in the broadest sense: operators, maintenance operators, administrators, dismantlers of the system, trainers;
—   the customer, who:
—   prepares technical and contractual specifications of need with which the system will comply;
—   sets up the funding of the programme;
—   oversees the realization and commissioning of the main system and of the support system;
—   facilitates the feedback.
NOTE 1   At the highest level of the system, the customer can also be referred to as the “project owner”.
NOTE 2   The “main system” can also be referred to as the “system of interest”.
—   the supplier(s) who deliver a system (main and support) to the customer, which meets the performance specifications on time and for the agreed cost, throughout the system life cycle;
NOTE 3   At the highest level of the system, the supplier can also be referred to as the “industrial prime contractor”.
—   the regulatory authorities that supervise and approve the support processes and equipment, as needed.
The principles laid down in this document can be applied, after adaptation, to all the customer/supplier relations resulting from the breakdown of the main contract into sub-contracts.

  • Draft
    40 pages
    English language
    sale 10% off
    e-Library read for
    1 day
CEN
EN 4314:2025(Main)
Aerospace series - Heat-resisting alloy X4NiCrTiMoV26-15 (1.4680) - Consumable electrode remelted - Not heat treated - Forging stock - a or D ≤ 250 mm
kSIST FprEN 4314:2025

This document specifies the requirements relating to:
Heat-resisting alloy X4NiCrTiMoV26-15 (1.4680)
Consumable electrode remelted
Not heat treated
Forging stock
a or D ≤ 250 mm
for aerospace applications.
W.nr: 1.4680.
ASD-STAN designation: FE-PA2602.

  • Draft
    9 pages
    English language
    sale 10% off
    e-Library read for
    1 day
CEN
EN 13126-12:2025(Main)
Building hardware - Hardware for windows and door height windows - Requirements and test methods - Part 12: Side hung projecting reversible hardware
kSIST FprEN 13126-12:2025

This document specifies requirements and test methods for durability, strength, security and function for side hung projecting reversible hardware for windows and door height windows.
NOTE   This document is applicable to side hung projecting reversible hardware whether fitted with integral restrictors or not. Where any restrictor is used it is intended to be tested in accordance with EN 13126-5.

  • Draft
    16 pages
    English language
    sale 10% off
    e-Library read for
    1 day
CEN
EN ISO 23696-2:2025(Main)
Water quality - Determination of nitrate in water using small-scale sealed tubes - Part 2: Chromotropic acid colour reaction (ISO 23696-2:2023)
oSIST prEN ISO 23696-2:2025

This document specifies a method for the determination of nitrate as NO3-N in water of various origin such as natural water (including groundwater, surface water and bathing water), drinking water and wastewater, in a measuring range of concentration between 0,20 mg/l and 30 mg/l of NO3-N using the small-scale sealed tube method. Different measuring ranges of small-scale sealed tube methods can be required.
The measuring ranges can vary depending on the type of the small-scale sealed tube method of different manufacturers.
It is up to the user to choose the small-scale sealed tube test with the appropriate application range or to adapt samples with concentrations exceeding the measuring range of a test by preliminary dilution.
NOTE 1   The results of a small-scale sealed tube test are most precise in the middle of the application range of the test.
Manufacturers' small-scale sealed tube methods are based on chromotropic colour reaction, depending on the typical operating procedure of the small-scale sealed tube used, see Clause 9.
NOTE 2      Laws, regulations or standards can require that the data is expressed as NO3 after conversion with the stoichiometric conversion factor 4,426 81 in Clause 11.
NOTE 3   In the habitual language, use of sewage treatment and on the displays of automated sealed-tube test devices, NO3 without indication of the negative charge has become the common notation for the parameter nitrate and especially for the parameter nitrate-N. This notation is adopted in this document even though not being quite correct chemical nomenclature.

  • Draft
    13 pages
    English language
    sale 10% off
    e-Library read for
    1 day