EN 10257-1:2011

Zinc or zinc alloy coated non-alloy steel wire for armouring either power cables or telecommunication cables - Part 1: Land cables

This European Standard specifies requirements for the properties of non-alloy carbon zinc or zinc alloy coated steel wire used primarily for the armouring of either subterranean land power or telecommunication cables.

Mit Zink oder Zinklegierung überzogener unlegierter Stahldraht zur Bewehrung von Strom- und Fernmeldekabeln - Teil 1: Erdverlegte Kabel

Diese Europäische Norm legt Anforderungen an die Eigenschaften von mit Zink oder Zinklegierung überzogenem, unlegiertem Stahldraht fest, der hauptsächlich zur Bewehrung von erdverlegten Strom- oder Fernmeldekabeln verwendet wird.

Fils en acier non allié revêtus de zinc ou d'alliage de zinc pour l'armure des câbles destinés au transport d'énergie ou aux télécommunications - Partie 1 : Câbles terrestres

La présente Norme européenne spécifie les prescriptions relatives aux caractéristiques des fils en acier non allié revêtus de zinc ou d’alliage de zinc, utilisés principalement pour l’armure des câbles terrestres enterrés destinés au transport d’énergie ou aux télécommunications.

S cinkom ali cinkovimi zlitinami prevlečena žica iz nelegiranega jekla za armiranje močnostnih in telekomunikacijskih kablov - 1. del: Zemeljski kabli

Ta evropski standard določa zahteve za lastnosti s cinkom ali cinkovimi zlitinami prevlečene žice iz nelegiranega jekla, ki se uporablja predvsem za armiranje podzemnih zemeljskih močnostnih ali telekomunikacijskih kablov.

General Information

• Status: Published
• Publication Date: 25-Oct-2011
• Withdrawal Date: 29-Apr-2012
• ICS: 77.140.65 - Steel wire, wire ropes and link chains
• ICS: 77.140.70 - Steel profiles
• Technical Committee: ECISS/TC 106 - Wire rod and wires
• Drafting Committee: ECISS/TC 106 - Wire rod and wires
• Current Stage: 9093 - Decision to confirm - Review Enquiry
• Completion Date: 03-Dec-2021
• Mandate: M/005 - Mandate to CEN/ECISS concerning standardization in the iron and steel sector
• Ref Project: SIST EN 10257-1:2012 - Zinc or zinc alloy coated non-alloy steel wire for armouring either power cables or telecommunication cables - Part 1: Land cables

Relations

• Replaces: EN 10257-1:1998 - Zinc or zinc alloy coated non-alloy steel wire for armouring either power cables or telecommunication cables - Part 1: Land cables
• Effective Date: 22-Dec-2008

Standards Content (Sample)

2003-01.Slovenski inštitut za standardizacijo. Razmnoževanje celote ali delov tega standarda ni dovoljeno.LMit Zink oder Zinklegierung überzogener unlegierter Stahldraht zur Bewehrung von Strom- und Fernmeldekabeln- - Teil 1: Erdverlegte KabelFils en acier non allié, revêtu de zinc ou d'alliage de zinc, pour armure de câbles destinés au transport d'énergie ou aux télécommunications - Partie 1: Câbles terrestresZinc or zinc alloy coated non-alloy steel wire for armouring either power cables or telecommunication cables - Part 1: Land cables77.140.65Jeklene žice, jeklene vrvi in verigeSteel wire, wire ropes and link chains29.060.20KabliCablesICS:Ta slovenski standard je istoveten z:EN 10257-1:2011SIST EN 10257-1:2012en01-januar-2012SIST EN 10257-1:2012SLOVENSKI
STANDARDSIST EN 10257-1:20001DGRPHãþD



SIST EN 10257-1:2012



EUROPEAN STANDARD NORME EUROPÉENNE EUROPÄISCHE NORM
EN 10257-1
October 2011 ICS 77.140.65 Supersedes EN 10257-1:1998English Version
Zinc or zinc alloy coated non-alloy steel wire for armouring either power cables or telecommunication cables - Part 1: Land cables Fils en acier non allié revêtus de zinc ou d'alliage de zinc pour l'armure des câbles destinés au transport d'énergie ou aux télécommunications - Partie 1: Câbles terrestres
Mit Zink oder Zinklegierung überzogener unlegierter Stahldraht zur Bewehrung von Strom- und Fernmeldekabeln - Teil 1: Erdverlegte Kabel This European Standard was approved by CEN on 10 September 2011.
CEN members are bound to comply with the CEN/CENELEC Internal Regulations which stipulate the conditions for giving this European Standard the status of a national standard without any alteration. Up-to-date lists and bibliographical references concerning such national standards may be obtained on application to the CEN-CENELEC Management Centre or to any CEN member.
This European Standard exists in three official versions (English, French, German). A version in any other language made by translation under the responsibility of a CEN member into its own language and notified to the CEN-CENELEC Management Centre has the same status as the official versions.
CEN members are the national standards bodies of Austria, Belgium, Bulgaria, Croatia, Cyprus, Czech Republic, Denmark, Estonia, Finland, France, Germany, Greece, Hungary, Iceland, Ireland, Italy, Latvia, Lithuania, Luxembourg, Malta, Netherlands, Norway, Poland, Portugal, Romania, Slovakia, Slovenia, Spain, Sweden, Switzerland and United Kingdom.
EUROPEAN COMMITTEE FOR STANDARDIZATION
COMITÉ EUROPÉEN DE NORMALISATION EUROPÄISCHES KOMITEE FÜR NORMUNG
Management Centre:
Avenue Marnix 17,
B-1000 Brussels © 2011 CEN All rights of exploitation in any form and by any means reserved worldwide for CEN national Members. Ref. No. EN 10257-1:2011: ESIST EN 10257-1:2012



EN 10257-1:2011 (E) 2 Contents Page Foreword .31Scope .42Normative references .43Terms and definitions .44Information to be supplied by the purchaser .45Designation .56Manufacture .56.1Non-alloy steel .56.2Welds in coils .57Requirements .67.1Mechanical properties .67.1.1Tensile strength and elongation .67.1.2Torsion .67.2Nominal diameter and tolerances .67.3Coating, adhesion and surface finish
...