77.150.60 - Lead, zinc and tin products

This European Standard specifies requirements for self-supporting roofing products for discontinuous laying made from copper or zinc-copper-titanium alloy sheet with or without additional organic coatings.
The standard establishes general characteristics, definitions and labelling for the products, together with requirements for the materials from which the products can be manufactured. It is intended to be used either by manufacturers to ensure that their products comply with the requirements ...view more

This European Standard specifies the designation, the requirements for chemical composition, surface condition and dimensional tolerances for rolled lead sheet. Lead sheet covered by this European standard is made by the roll deformation process and is intended for roofs, flashings, weatherings, claddings, pre-formed panels, damp-proof courses and similar building work.
No requirements for supporting construction, design of roof or cladding systems and methods of joining are included.

This European Standard specifies the designation, the requirements for chemical composition, surface condition and dimensional tolerances for rolled lead sheet. Lead sheet covered by this European standard is made by the roll deformation process and is intended for roofs, flashings, weatherings, claddings, pre-formed panels, damp-proof courses and similar building work.
No requirements for supporting construction, design of roof or cladding systems and methods of joining are included.

This European Standard specifies the designations, chemical compositions and other requirements for lead and lead alloy electric cable sheaths and sleeves.

This European Standard specifies atomic spectroscopic methods (Atomic Absorption Spectrometry (AAS) or inductively coupled plasma Atomic Emission Spectrometry (ICP-AES)) intended for the analysis of ingot tin. It is written for use by experienced analysts familiar with atomic spectrometric techniques..

TC - Modification in 7.2

This European Standard defines specific terms which are helpful for the communication within the lead industry and its customers relating to scrap of lead and lead alloys.
A clear terminology and classification of these materials, new and used, recovered from products and processes is also contained. No reference is made either to commercial terms of commercial contracts and conditions such as collection, weighing, shipping, receiving and claims or technical values such as lead and alloying ele...view more

TC - Modification in 7.2

This European Standard specifies the designations, chemical compositions and other requirements for lead and lead alloy electric cable sheaths and sleeves.

This European Standard specifies atomic spectroscopic methods (Atomic Absorption Spectrometry (AAS) or inductively coupled plasma Atomic Emission Spectrometry (ICP-AES)) intended for the analysis of ingot tin. It is written for use by experienced analysts familiar with atomic spectrometric techniques..

This European Standard specifies the designation, chemical composition, sampling and analysis, marking, labelling and other requirements for lead alloys in ingot form which are used for the manufacture of electric cable sheathing and sleeves.

This European Standard specifies the requirements, acceptance tolerances and chemical and physical test procedures for lead oxides, considering litharges (powder or granulated), battery oxides (Barton or Mill) and crystal red lead. WARNING: Lead and lead compounds are toxic by inhalation and/or ingestion.

This part of EN 1559 applies to castings made from zinc alloys produced by sand casting, permanent mould casting, pressure die casting, centrifugal casting, continuous casting or investment casting. This standard specifies the additional technical delivery conditions for zinc alloy castings. This standard does not apply to ingots, bars, billets (or other shapes) for further reprocessing, such as remelting, grinding or extrusion.

This European Standard specifies the designation, chemical composition, marking and other requirements for zinc alloy castings.

This European Standard specifies the designation, chemical composition, sampling and analysis, marking, labelling and other requirements for lead alloys in ingot form which are used for the manufacture of electric cable sheathing and sleeves.

This part of EN 1559 applies to castings made from zinc alloys produced by sand casting, permanent mould casting, pressure die casting, centrifugal casting, continuous casting or investment casting. This standard specifies the additional technical delivery conditions for zinc alloy castings. This standard does not apply to ingots, bars, billets (or other shapes) for further reprocessing, such as remelting, grinding or extrusion.

This European Standard specifies the designation, chemical composition, marking and other requirements for zinc alloy castings.

This Part of EN 611 specifies the requirements for the fabrication, sampling, analysis and marking of pewterware. It does not cover articles manufactured from materials other than pewter which have been coated or clad with pewter. Note: The requirements for pewter alloys are specified in EN 611-2.

This draft European Standard specifies the requirements for the chemical composition, surface condition, sampling, analysis, inspection documentation and marking for five grades of ingot tin. The grades of tin included in this draft European Standard are those which are traded internationally.

This EN specifies requirements for roofing products used for assembly into coverings for pitched roofs, made from Zinc Copper Titanium alloy sheet with or without additional organic coatings. This standard establishes the general characteristics, definitions, classifications, labelling and quality control for the products. Products can be prefabricated or semiformed products (eg. interlocking tile, slates, flashings...) as well as strip, coil sheet for on-site-formed applications (eg. standing s...view more