SIST EN 12844:1999
(Main)Zinc and zinc alloys - Castings - Specifications
General Information
- Abstract
This European Standard specifies the designation, chemical composition, marking and other requirements for zinc alloy castings.
- Status
- Published
- Publication Date
- 31-Oct-1999
- Technical Committee
- INEK - Nonferrous metals
- Current Stage
- 6060 - National Implementation/Publication (Adopted Project)
- Start Date
- 01-Nov-1999
- Due Date
- 01-Nov-1999
- Completion Date
- 01-Nov-1999
Overview
EN 12844:1998 - Zinc and zinc alloys - Castings - Specifications is a European (CEN) standard that defines how zinc alloy castings are designated, the required chemical composition, marking and related delivery requirements. The standard establishes common terminology and minimum specification elements for manufacturers, purchasers and conformity assessment bodies to ensure traceability and consistent acceptance criteria for zinc and zinc-alloy castings.
Key topics
The standard addresses the following primary technical topics:
- Designation - naming and classification conventions for zinc and zinc-alloy castings.
- Chemical composition - required element specification and limits for listed zinc alloys.
- Marking and identification - rules for marking castings for traceability (alloy grade, manufacturer or batch identification).
- Other requirements - additional contractual or product requirements typically associated with castings (for example inspection, sampling, surface condition, packaging and documentation) as defined between supplier and purchaser.
Note: EN 12844 defines the structural elements and mandatory fields for specification. It does not replace project-specific drawings or contractual tolerances where these are required.
Applications
EN 12844 is used wherever zinc and zinc-alloy castings are specified, including:
- Component manufacturers producing die-cast or gravity-cast zinc parts
- Procurement and supply chain teams specifying material and acceptance criteria
- Quality and metallurgical laboratories performing material verification and incoming inspection
- Design and engineering teams selecting zinc alloys for corrosion resistance, dimensional stability and finishing
- Regulators and certification bodies requiring standardized material designation and traceability
Using EN 12844 helps ensure consistent material identity, supports quality control processes, and reduces disputes during acceptance of delivered castings.
Practical use and benefits
- Provides a clear basis for purchase orders and material certificates (reduces ambiguity on alloy grade and marking).
- Facilitates traceability from batch to finished component through standardized marking requirements.
- Assists quality engineers and inspectors in defining acceptance criteria and documentation checks.
Related standards
- National implementations (for example SIST EN 12844:1999) align local practice with EN 12844:1998.
- EN 12844 is often referenced alongside other CEN/ISO standards covering non‑ferrous metals, casting processes and testing methods for full specification of cast components.
Keywords: EN 12844:1998, zinc alloy castings, zinc castings standard, zinc and zinc alloys specifications, CEN standard, zinc castings designation, chemical composition, marking.
Relations
- Effective Date
- 25-Aug-2026
- Effective Date
- 28-Jan-2026
- Effective Date
- 28-Jan-2026
- Effective Date
- 28-Jan-2026
- Effective Date
- 28-Jan-2026
- Effective Date
- 28-Jan-2026
- Effective Date
- 28-Jan-2026
- Effective Date
- 28-Jan-2026
- Effective Date
- 28-Jan-2026
- Effective Date
- 28-Jan-2026
- Effective Date
- 28-Jan-2026
- Effective Date
- 28-Jan-2026
- Effective Date
- 28-Jan-2026
- Effective Date
- 28-Jan-2026
- Effective Date
- 28-Jan-2026
Get Certified
Connect with accredited certification bodies for this standard
Element Materials Technology
Materials testing and product certification.
Inštitut za kovinske materiale in tehnologije
Institute of Metals and Technology. Materials testing, metallurgical analysis, NDT.
Sponsored listings
Frequently Asked Questions
SIST EN 12844:1999 is a standard published by the Slovenian Institute for Standardization (SIST). Its full title is "Zinc and zinc alloys - Castings - Specifications". This standard covers: This European Standard specifies the designation, chemical composition, marking and other requirements for zinc alloy castings.
This European Standard specifies the designation, chemical composition, marking and other requirements for zinc alloy castings.
SIST EN 12844:1999 is classified under the following ICS (International Classification for Standards) categories: 77.150.60 - Lead, zinc and tin products. The ICS classification helps identify the subject area and facilitates finding related standards.
SIST EN 12844:1999 has the following relationships with other standards: It is inter standard links to SIST ISO 7000:1995, SIST EN 10204:2004, SIST EN 1774:1998, SIST EN ISO 3815-1:2005, SIST EN 12441-2:2004, SIST EN ISO 3815-2:2005, SIST EN 12441-9:2005, SIST EN 12441-11:2006, SIST EN 12441-10:2005, SIST EN 14290:2004, SIST EN 12441-7:2005, SIST EN 12441-6:2004, SIST EN 12441-1:2004, SIST EN 12441-3:2004, SIST EN 1559-1:2011. Understanding these relationships helps ensure you are using the most current and applicable version of the standard.
SIST EN 12844:1999 is available in PDF format for immediate download after purchase. The document can be added to your cart and obtained through the secure checkout process. Digital delivery ensures instant access to the complete standard document.
Standards Content (Sample)
2003-01.Slovenski inštitut za standardizacijo. Razmnoževanje celote ali delov tega standarda ni dovoljeno.Cink in cinkove zlitine - Ulitki – SpecifikacijeZink und Zinklegierungen - Gußstücke - SpezifikationenZinc et alliages de zinc - Pieces moulées - SpécificationsZinc and zinc alloys - Castings - Specifications77.150.60L]GHONLLead, zinc and tin productsICS:Ta slovensk
...