This European Standard specifies product characteristics for demountable stands at permanent or temporary entertainment venues including sports stadiums, sport halls and indoor and outdoor facilities. This standard is not applicable to stands of a moveable type where last row of places for spectators is under 1 m height from the ground.
NOTE   Amusement parks are covered by EN 13814, Fairground and amusement park machinery and structures - Safety.

    • sale 10% off
    • Standard
      22 pages
      English language
    • e-Library read for
      1 day
    • sale 10% off
    • Draft
      22 pages
      English language
    • e-Library read for
      1 day

1.1   Scope of CEN/TS 17440
(1)This document provides additional or amended provisions to EN 1990 to cover the assessment of existing structures (see EN 1990:2002, 1.1(4)), and the retained parts of existing structures that are being modified, extended, strengthened or retrofitted.
NOTE 1   The assessment of an existing structure is, in many aspects, different from the design of a new structure, see Introduction.
NOTE 2   There can be some aspects of EN 1990 that are required for design but are not...
view more

    • sale 10% off
    • Technical specification
      50 pages
      English language
    • e-Library read for
      1 day
    • sale 10% off
    • Technical specification
      50 pages
      English language
    • e-Library read for
      1 day

This document defines principles, requirements and guidelines for the development and use of benchmarks when assessing the economic, social and/or environmental performance of buildings and civil engineering works by using sustainability indicators. It complements and supports the application of ISO 21929-1 and ISO/TS 21929-2 by creating principles and requirements for the establishment of benchmarks that support target setting, decision making and communication to third parties. This document i...view more

    • sale 15% off
    • Standard
      16 pages
      English language
    • sale 15% off
    • Standard
      16 pages
      English language
    • sale 15% off
    • Standard
      18 pages
      French language

ISO 18523-1:2016 specifies the formats to present schedule and condition of building, zone and space usage, which is to be referred to as input data of energy calculations for non-residential buildings.
The schedule and condition include schedules of occupancy, operation of technical building systems, ventilation rate, hot water usage and internal heat gains due to occupancy, lighting and equipment.
ISO 18523-1:2016 also gives categories of building, zone and space according to differentiating...
view more

    • sale 15% off
    • Standard
      253 pages
      English language
    • sale 10% off
    • Standard
      259 pages
      English language
    • e-Library read for
      1 day
    • sale 10% off
    • Standard
      259 pages
      English language
    • e-Library read for
      1 day

ISO 18523-2:2018 specifies the formats to present the schedule and conditions of zone and space usage (referred to as input data of energy calculations) for residential buildings.
The schedule and conditions include schedules of occupancy, operation of technical building systems, ventilation rates, hot water usage, usage of appliances and internal heat gains due to occupancy, lighting and appliances. The schedule and conditions for lighting are applicable to fixed installed lighting fixtures.
...
view more

    • sale 15% off
    • Standard
      33 pages
      English language
    • sale 10% off
    • Standard
      38 pages
      English language
    • e-Library read for
      1 day
    • sale 10% off
    • Standard
      38 pages
      English language
    • e-Library read for
      1 day
    • sale 15% off
    • Standard
      92 pages
      English language

This document establishes the required inputs, outputs and links (structure) of the calculation method for heating and cooling space emission systems. This document is applicable to the energy performance calculation of heating systems and water-based cooling space emission sub-systems.

    • sale 15% off
    • Standard
      50 pages
      French language
    • sale 15% off
    • Standard
      47 pages
      English language

This standard provides a comprehensive set of procedures for verifying the correct implementation of each capability claimed on a BACnet PICS including: (a) support of each claimed BACnet service, either as an initiator, executor, or both, (b) support of each claimed BACnet object-type, including both required properties and each claimed optional property, (c) support of the BACnet network layer protocol, (d) support of each claimed data link option, and (e) support of all claimed special functi...view more

    • sale 15% off
    • Standard
      721 pages
      English language

This document defines the integration of KNX protocol implementations on top of Internet protocol (IP) networks, called KNXnet/IP. It describes a standard protocol for KNX devices connected to an IP network, called KNXnet/IP devices. The IP network acts as a fast (compared to KNX twisted pair transmission speed) backbone in KNX installations.

    • sale 10% off
    • Standard
      231 pages
      English language
    • e-Library read for
      1 day
    • sale 10% off
    • Draft
      251 pages
      English language
    • e-Library read for
      1 day

This document provides an overview of design for disassembly and adaptability (DfD/A) principles and potential strategies for integrating these principles into the design process. This document provides information for owners, architects, engineers, and product designers and manufacturers to assist in their understanding of potential DfD/A options and considerations, and for other parties who are responsible for financing, regulating, constructing, transforming, deconstructing, or demolishing co...view more

    • sale 15% off
    • Standard
      39 pages
      French language
    • sale 15% off
    • Standard
      35 pages
      English language

This document specifies requirements and recommendations for using simultaneous interpreting delivery platforms in settings where the interpreters are, or are not, in the same room as participants and speakers at a communicative event. In conjunction with ISO 20108, this document provides the relevant requirements and recommendations for the quality and transmission of sound and image to interpreters and from interpreters to participants, and for the configuration of the interpreter's working en...view more

    • sale 15% off
    • Technical specification
      14 pages
      French language
    • sale 15% off
    • Technical specification
      14 pages
      English language

This document identifies and establishes general principles for the contribution of buildings, civil engineering works and other types of construction works (hereinafter referred to collectively as construction works) to sustainable development. It is based on the concept of sustainable development as it applies to the life cycle of construction works, from inception to the end-of-life. This document is applicable to new and existing construction works, individually and collectively, as well as ...view more

    • sale 15% off
    • Standard
      25 pages
      French language
    • sale 15% off
    • Standard
      24 pages
      English language

This document defines the integration of KNX protocol implementations on top of Internet protocol (IP) networks, called KNXnet/IP. It describes a standard protocol for KNX devices connected to an IP network, called KNXnet/IP devices. The IP network acts as a fast (compared to KNX twisted pair transmission speed) backbone in KNX installations.

    • sale 15% off
    • Standard
      221 pages
      English language

This Standard describes a method to assess the physical condition of all types of immobile constructed assets in a uniform and objective way. The assessment results in a condition class, which expresses the technical state of maintenance of an asset at any certain moment in time on a six-point scale. It therefore can represent either the deterioration of an asset or part thereof or the physical condition at the time of commissioning. By repeating the assessment at regular intervals, it is possib...view more

    • sale 10% off
    • Technical specification
      26 pages
      English language
    • e-Library read for
      1 day
    • sale 10% off
    • Technical specification
      27 pages
      English language
    • e-Library read for
      1 day

This document specifies a planning method for functional performance testing (FPT). This document is applicable to the planning of the FPT during the design phase of new buildings and retrofit projects, which is defined in ISO 16813. This document establishes how to design building environmental systems when the FPT is being carried out. This document defines the following: — what kind of information regarding the system is required (for example, design documents, drawings and product specificat...view more

    • sale 15% off
    • Standard
      14 pages
      English language

This document specifies procedures and conditions to enable the heat flow in water-based and electrical surface heating and cooling systems to be determined relative to the medium differential temperature for systems. The determination of thermal performance of water-based surface heating and cooling systems and their conformity to this document is carried out by calculation in accordance with design documents and a model. This enables a uniform assessment and calculation of water-based surface ...view more

    • sale 15% off
    • Standard
      7 pages
      English language

This document specifies requirements for typical conference systems, the parts they are composed
of, the auxiliary devices necessary for their use (such as microphones, headphones, and sound
reinforcement equipment) and the environment in which they are used. These requirements ensure
interoperability and optimum performance under conditions of normal operation.
It is applicable to both wired and wireless systems.
The environment and areas where events are held are described in Annex A.
Th...
view more

    • sale 15% off
    • Standard
      33 pages
      French language
    • sale 15% off
    • Standard
      32 pages
      English language
    • sale 10% off
    • Standard
      37 pages
      English language
    • e-Library read for
      1 day

This document establishes guidelines for the determination of input parameters for ceiling mounted radiant heating and cooling panels in relation to ISO 52031. The requirements specified by this document are applicable only to the components of the heating/cooling systems and the elements which are part of the heating/cooling panels and which are installed to provide heating and/or cooling. This document is applicable to water-based ceiling mounted radiant heating and cooling panels in residenti...view more

    • sale 15% off
    • Standard
      6 pages
      English language

This document provides a design process for daylight openings in order to ensure the principle of sustainability in the indoor visual environment. The design process for daylight openings includes the consideration of: — sunshine duration in the building interiors; — daylight opening ratio to the wall area of a habitable room; — daylight opening ratio to the floor area of a habitable room; — appropriate levels of indoor daylight based on human visual needs and the extent of sunlight; — daylight ...view more

    • sale 15% off
    • Standard
      26 pages
      English language

This document specifies the minimum requirements necessary to ensure the safe design, calculation, manufacture, and installation of mobile, temporary or permanently installed machinery and structures which are intended for use by persons as a leisure activity, e.g. roundabouts, swings, boats, ferris wheels, roller coasters, chutes, booths, side shows, and structures for artistic aerial displays. The above items are hereafter called amusement devices, which are intended to be installed both repea...view more

    • sale 10% off
    • Standard
      176 pages
      English language
    • e-Library read for
      1 day