iTeh StandardsiTeh Standards
EURUSD
Your shopping cart is empty.
ASTM

ASTM F1692-01(2023)

(Test Method)

Standard Test Method for Life Evaluation of a Turbine-Powered Nozzle for Household Central Vacuum Cleaning Systems

Standard Test Method for Life Evaluation of a Turbine-Powered Nozzle for Household Central Vacuum Cleaning Systems

SIGNIFICANCE AND USE
4.1 The test results provide an indication of the turbine-powered nozzle life. The end of turbine life will be judged in accordance with 3.1.1.
SCOPE
1.1 This test method covers the turbine-powered nozzle used in household central vacuum cleaning systems.  
1.2 This test method provides a test for determining the operating turbine life in hours by an accelerated laboratory procedure. The turbine is tested while mounted and operated in the power nozzle.  
1.3 This test method covers only the turbine-powered nozzle. The system used to provide the airflow source is not under consideration.  
1.4 This test method is limited to the determination of turbine life for a household turbine-powered nozzle.  
1.5 The values stated in inch-pound units are to be regarded as the standard. The values given in parentheses are for information only.  
1.6 This standard does not purport to address all of the safety concerns, if any, associated with its use. It is the responsibility of the user of this standard to establish appropriate safety, health, and environmental practices and determine the applicability of regulatory limitations prior to use.  
1.7 This international standard was developed in accordance with internationally recognized principles on standardization established in the Decision on Principles for the Development of International Standards, Guides and Recommendations issued by the World Trade Organization Technical Barriers to Trade (TBT) Committee.

General Information

Status
Published
Publication Date
31-Aug-2023
ICS
97.080 - Cleaning appliances
Technical Committee
F11 - Vacuum Cleaners
Drafting Committee
F11.30 - Durability-Reliability
Current Stage
Ref Project

Buy Standard

ASTM F1692-01(2023) - Standard Test Method for Life Evaluation of a Turbine-Powered Nozzle for Household Central Vacuum Cleaning SystemsASTM F1692-01(2023) - Standard Test Method for Life Evaluation of a Turbine-Powered Nozzle for Household Central Vacuum Cleaning Systems
PreviousNext
Standard
ASTM F1692-01(2023) - Standard Test Method for Life Evaluation of a Turbine-Powered Nozzle for Household Central Vacuum Cleaning Systems
English language
5 pages
sale 15% off
Preview
sale 15% off
Preview

Standards Content (Sample)

This international standard was developed in accordance with internationally recognized principles on standardization established in the Decision on Principles for the
Development of International Standards, Guides and Recommendations issued by the World Trade Organization Technical Barriers to Trade (TBT) Committee.
Designation: F1692 − 01 (Reapproved 2023)
Standard Test Method for
Life Evaluation of a Turbine-Powered Nozzle for Household
1
Central Vacuum Cleaning Systems
This standard is issued under the fixed designation F1692; the number immediately following the designation indicates the year of
original adoption or, in the case of revision, the year of last revision. A number in parentheses indicates the year of last reapproval. A
superscript epsilon (´) indicates an editorial change since the last revision or reapproval.
1. Scope chrometer (the Measurement of Wet- and Dry-Bulb Tem-
peratures)
1.1 This test method covers the turbine-powered nozzle
F431 Specification for Air Performance Measurement Ple-
used in household central vacuum cleaning systems.
num Chamber for Vacuum Cleaners
1.2 This test method provides a test for determining the
F608 Test Method for Evaluation of Carpet Embedded Dirt
operating turbine life in hours by an accelerated laboratory
Removal Effectiveness of Household/Commercial
procedure. The turbine is tested while mounted and operated in
Vacuum Cleaners
the power nozzle.
F655 Specification for Test Carpets and Pads for Vacuum
3
1.3 This test method covers only the turbine-powered Cleaner Testing (Withdrawn 2022)
nozzle. The system used to provide the airflow source is not
3. Terminology
under consideration.
3.1 Definitions of Terms Specific to This Standard:
1.4 This test method is limited to the determination of
3.1.1 turbine stoppage—for turbine-powered nozzles, any
turbine life for a household turbine-powered nozzle.
failure integral with the turbine assembly such as housing(s),
1.5 The values stated in inch-pound units are to be regarded
bearings, or any other component judged to be integral with the
as the standard. The values given in parentheses are for
turbine.
information only.
4. Significance and Use
1.6 This standard does not purport to address all of the
4.1 The test results provide an indication of the turbine-
safety concerns, if any, associated with its use. It is the
powered nozzle life. The end of turbine life will be judged in
responsibility of the user of this standard to establish appro-
accordance with 3.1.1.
priate safety, health, and environmental practices and deter-
mine the applicability of regulatory limitations prior to use.
5. Apparatus and Materials
1.7 This international standard was developed in accor-
5.1 Voltage Regulator System—to control the input voltage
dance with internationally recognized principles on standard-
to the vacuum cleaner or airflow source. The regulator must be
ization established in the Decision on Principles for the
capable of maintaining the vacuum cleaner or the airflow
Development of International Standards, Guides and Recom-
source’s rated voltage 61 % and rated frequency 61 Hz with
mendations issued by the World Trade Organization Technical
a waveform that is essentially sinusoidal with 3 % maximum
Barriers to Trade (TBT) Committee.
harmonic distortion for the duration of the test.
2. Referenced Documents
5.2 Voltmeter, to provide measurements accurate to within
2
61 %.
2.1 ASTM Standards:
D75 Practice for Sampling Aggregates
5.3 Timer and Switch, having the capacity to control the
E337 Test Method for Measuring Humidity with a Psy-
off/on duty cycle of the nozzle and airflow source during the
life test.
1
5.4 Wattmeter, to provide measurements accurate to within
This test method is under the jurisdiction of ASTM Committee F11 on Vacuum
Cleaners and is the direct responsibility of Subcommittee F11.30 on Durability-
61 %.
Reliability.
1
5.5 Sharp-Edge Orifice Plate—The orifice, 1 ⁄4-in. (32-mm)
Current edition approved Sept. 1, 2023. Published September 2023. Originally
approved in 1996. Last previous edition approved in 2016 as F1692 – 01 (2016).
diameter, shall be in accordance with the orifice plate illus-
DOI: 10.1520/F1692-01R23.
trated in Specification F431.
2
For referenced ASTM standards, visit the ASTM website, www.astm.org, or
contact ASTM Customer Service at service@astm.org. For Annual Book of ASTM
3
Standards volume information, refer to the standard’s Document Summary page on The last approved version of this historical standard is referenced on
the ASTM website. www.astm.org.
Copyright © ASTM International, 100 Barr Harbor Drive, PO Box C700, West Conshohocken, PA 19428-2959. United States
1

---------------------- Page: 1 ----------------------
F1692 − 01 (2023)
5.6 Plenum Chamber, conforming to the plenum chamber shall be restrained suitably in the horizontal operating plane yet
specifications stated in Specification F431. allowed freedom of movement in the vertical plane for
operation.
5.7 Water Manometer, or equi
...

Questions, Comments and Discussion

Ask us and Technical Secretary will try to provide an answer. You can facilitate discussion about the standard in here.

This May Also Interest You

ASTM
ASTM F2863-11(2023)(Specification)
Standard Specification for Central Vacuum Hose Inlet Valve Socket Dimensions

ABSTRACT
This specification establishes requirements and test methods for dimensions and tolerances of central-vacuum hose inlet valve sockets. The requirements pertain to the dimensions, tolerances, and socket dimensions. The test methods include sampling and conditioning.
SCOPE
1.1 This specification establishes requirements and test methods for dimensions and tolerances of central-vacuum hose inlet valve sockets.  
1.2 All notes and footnotes shall be considered as non-mandatory requirements of the specification.  
1.3 This specification does not apply to inlet valve back-up (or mounting) plates.  
1.4 This standard is applicable to universal valves marked with ASTM F2863, and does not limit proprietary valve designs.  
1.5 The values stated in inch-pound units are to be regarded as standard. The values given in parentheses are mathematical conversions to SI units that are provided for information only and are not considered standard.  
1.6 This standard does not purport to address all of the safety concerns, if any, associated with its use. It is the responsibility of the user of this standard to establish appropriate safety, health, and environmental practices and determine the applicability of regulatory limitations prior to use.  
1.7 This international standard was developed in accordance with internationally recognized principles on standardization established in the Decision on Principles for the Development of International Standards, Guides and Recommendations issued by the World Trade Organization Technical Barriers to Trade (TBT) Committee.

  • Technical specification
    2 pages
    English language
    sale 15% off
ASTM
ASTM F922-01(2023)(Test Method)
Standard Test Method for Motor Life Evaluation of an Electric Motorized Nozzle

SIGNIFICANCE AND USE
4.1 The test results provide an indication of the motor life of an electric motorized nozzle. End of motor life will be judged in accordance with Section 3.
SCOPE
1.1 This test method covers the motorized nozzle used with household or commercial vacuum cleaner systems, that is, combination cleaners.  
1.2 This test method provides a test for determining operating motor life in hours by an accelerated laboratory procedure. The motors are tested while mounted and operated in the motorized nozzle.  
1.3 This test method covers only the motorized nozzle. The system used to provide the airflow source is not under consideration.  
1.4 This test method is limited to the determination of motor life for an electrically powered household or commercial motorized nozzle.  
1.5 The values stated in inch-pound units are to be regarded as the standard. The values given in parentheses are for information only.  
1.6 This standard does not purport to address all of the safety concerns, if any, associated with its use. It is the responsibility of the user of this standard to establish appropriate safety, health, and environmental practices and determine the applicability of regulatory limitations prior to use.  
1.7 This international standard was developed in accordance with internationally recognized principles on standardization established in the Decision on Principles for the Development of International Standards, Guides and Recommendations issued by the World Trade Organization Technical Barriers to Trade (TBT) Committee.

  • Standard
    6 pages
    English language
    sale 15% off
ASTM
ASTM F1038-02(2023)(Test Method)
Standard Test Method for Motor Life Evaluation of a Canister, Hand-held, Stick, and Utility Type Vacuum Cleaner Without a Driven Agitator

SIGNIFICANCE AND USE
4.1 The test results provide an indication of the motor life of an electric vacuum cleaner in operating hours. The end of the motor life will be judged in accordance with Section 3.
SCOPE
1.1 This test method is limited to evaluation of canister, hand-held, stick, and utility type vacuum cleaners without a driven agitator.  
1.2 This test method provides a test to determine operating life of the motor, before servicing is needed, by an accelerated laboratory procedure. The motor is tested while mounted and is operated in a vacuum cleaner.  
1.3 The values as stated in inch-pound units are to be regarded as the standard. The values in parentheses are given for information only.  
1.4 This standard does not purport to address all of the safety concerns, if any, associated with its use. It is the responsibility of the user of this standard to establish appropriate safety, health, and environmental practices and determine the applicability of regulatory limitations prior to use.  
1.5 This international standard was developed in accordance with internationally recognized principles on standardization established in the Decision on Principles for the Development of International Standards, Guides and Recommendations issued by the World Trade Organization Technical Barriers to Trade (TBT) Committee.

  • Standard
    4 pages
    English language
    sale 15% off
ASTM
ASTM F1601-01(2023)(Test Method)
Standard Test Method for Motor Life Evaluation of an Electric Motorized Nozzle for Central Vacuum Cleaning Systems

SIGNIFICANCE AND USE
4.1 The test results provide an indication of the motor life of an electric motorized nozzle. The end of motor life will be judged in accordance with Section 3.
SCOPE
1.1 This test method covers the motorized nozzle used in household or commercial central vacuum cleaning systems.  
1.2 This test method provides a test for determining operating motor life in hours by an accelerated laboratory procedure. The motors are tested while mounted and operated in the motorized nozzle.  
1.3 This test method covers only the motorized nozzle. The system used to provide the airflow source is not under consideration.  
1.4 This test method is limited to the determination of motor life for an electrically powered household or commercial motorized nozzle.  
1.5 The values stated in inch-pound units are to be regarded as the standard. The values given in parentheses are for information only.  
1.6 This standard does not purport to address all of the safety concerns, if any, associated with its use. It is the responsibility of the user of this standard to establish appropriate safety, health, and environmental practices and determine the applicability of regulatory limitations prior to use.  
1.7 This international standard was developed in accordance with internationally recognized principles on standardization established in the Decision on Principles for the Development of International Standards, Guides and Recommendations issued by the World Trade Organization Technical Barriers to Trade (TBT) Committee.

  • Standard
    5 pages
    English language
    sale 15% off
ASTM
ASTM F884-01(2023)(Test Method)
Standard Test Method for Motor Life Evaluation of a Built-In (Central Vacuum) Vacuum Cleaner

SIGNIFICANCE AND USE
4.1 The test results provide an indication of the motor life of an electric vacuum cleaner. The end of the motor life will be judged in accordance with Section 3.
SCOPE
1.1 This test method is limited to motor life evaluation of central vacuum cleaners.  
1.2 This test method provides a test to determine operating life of the motor, before servicing is needed, by an accelerated laboratory procedure. The motor is tested while mounted and is operated in central vacuum cleaner.  
1.3 The values as stated in inch-pound units are to be regarded as the standard. The values in parentheses are for information only.  
1.4 This standard does not purport to address all of the safety concerns, if any, associated with its use. It is the responsibility of the user of this standard to establish appropriate safety, health, and environmental practices and determine the applicability of regulatory limitations prior to use.  
1.5 This international standard was developed in accordance with internationally recognized principles on standardization established in the Decision on Principles for the Development of International Standards, Guides and Recommendations issued by the World Trade Organization Technical Barriers to Trade (TBT) Committee.

  • Standard
    5 pages
    English language
    sale 15% off
ASTM
ASTM F555-01(2023)(Test Method)
Standard Test Method for Motor Life Evaluation of an Upright Vacuum Cleaner

SIGNIFICANCE AND USE
4.1 The test results provide an indication of the motor life of an electric upright vacuum cleaner. End of motor life will be judged in accordance with Section 3.
SCOPE
1.1 This test method covers motor life evaluation of household or commercial single and dual motor upright vacuum cleaners (uprights with separate motors for creating the vacuum and driving the floor brush). Self-propelled or power-assist cleaners are not within the scope of this test method.  
1.2 This test method is limited to evaluation of the upright vacuum cleaner electric motor(s).  
1.3 This test method provides a test to determine operating life of the motor(s), before servicing is needed, by an accelerated laboratory procedure. Motor(s) are tested while mounted and operated in the upright vacuum cleaner.  
1.4 The values stated in inch-pound units are to be regarded as standard. The values given in parentheses are mathematical conversions to SI units, which are provided for information only and are not considered standard.  
1.5 This standard does not purport to address all of the safety concerns, if any, associated with its use. It is the responsibility of the user of this standard to establish appropriate safety, health, and environmental practices and determine the applicability of regulatory limitations prior to use.  
1.6 This international standard was developed in accordance with internationally recognized principles on standardization established in the Decision on Principles for the Development of International Standards, Guides and Recommendations issued by the World Trade Organization Technical Barriers to Trade (TBT) Committee.

  • Standard
    5 pages
    English language
    sale 15% off
ASTM
ASTM F2756-11(2023)(Test Method)
Standard Test Method for Determining Energy Consumption of Vacuum Cleaners

SIGNIFICANCE AND USE
4.1 This test method provides an indication of the amount of energy usage of the vacuum cleaner while operating over a specified cleaning area at a specified stroke speed and total number of cleaning strokes.  
4.1.1 The test area is divided into a number of strips, the strip being defined as the width of the power head or nozzle. For the purpose of this procedure, the cleaning area is specified as 10 m2  (15 500 in.2), the stroke speed is defined as 0.5 m/s ± 0.03 m/s (1.7 ft/s ± 0.1 ft/s), with a total of 10 strokes per strip.  
4.2 In order to provide a uniform basis for measuring the performance described in 1.1, standardized test carpets are employed in this procedure.
SCOPE
1.1 This test method covers only a laboratory test for determining the energy usage-of household and commercial upright, canister, stick, and wet/dry vacuum cleaners operating on carpet when tested under specified conditions.  
1.1.1 This procedure may be used in conjunction with other performance criteria, such as cleaning effectiveness.  
1.1.2 Vacuum cleaners, other than upright vacuum cleaners, that provide a carpet-cleaning function are tested in accordance with the carpet-cleaning instructions provided in the manufacturer’s instruction manual. If the manufacturer’s instruction manual does not contain instructions for a carpet-cleaning function, the vacuum cleaner is not within the scope of this procedure.  
1.2 This test method is applicable to household and commercial types of vacuum cleaners.  
1.3 The values stated in SI units are to be regarded as standard. The inch-pound units given in parentheses are mathematical conversions that are provided for information only and are not considered standard.  
1.4 This standard does not purport to address all of the safety concerns, if any, associated with its use. It is the responsibility of the user of this standard to establish appropriate safety, health, and environmental practices and determine the applicability of regulatory limitations prior to use.  
1.5 This international standard was developed in accordance with internationally recognized principles on standardization established in the Decision on Principles for the Development of International Standards, Guides and Recommendations issued by the World Trade Organization Technical Barriers to Trade (TBT) Committee.

  • Standard
    4 pages
    English language
    sale 15% off
ASTM
ASTM F2607-08(2022)(Test Method)
Standard Test Method for Measuring the Hard Surface Floor-Cleaning Ability of Household/Commercial Vacuum Cleaners

SIGNIFICANCE AND USE
4.1 This test method will provide an indication of the ability of the vacuum cleaner in removing dry debris from hard surface floors. The cleaning ability in the laboratory test will not be the same as in home cleaning; however, in most cases, a vacuum cleaner that performs well in the laboratory will clean well in a home.  
4.2 To provide a uniform basis for measuring the performance described in 1.1, standardized test hard surface flooring and standardized test debris are used.
SCOPE
1.1 This test method provides only a laboratory test for determining the relative hard surface floor-cleaning ability of household/commercial vacuum cleaners when tested under specified test conditions.  
1.2 This test method is applicable to household/commercial types of upright, canister, combination, and stick vacuum cleaners that use a dry primary dirt receptacle and are intended for cleaning hard surface floors as a primary or secondary function.  
1.3 This test method applies only to the removal of dry debris from hard surface floors, not the removal of embedded dirt from carpet.  
1.4 The values stated in inch-pound units are to be regarded as standard. The values given in parentheses are mathematical conversions to SI units that are provided for information only and are not considered standard.  
1.5 This standard does not purport to address all of the safety concerns, if any, associated with its use. It is the responsibility of the user of this standard to establish appropriate safety, health, and environmental practices and determine the applicability of regulatory limitations prior to use.  
1.6 This international standard was developed in accordance with internationally recognized principles on standardization established in the Decision on Principles for the Development of International Standards, Guides and Recommendations issued by the World Trade Organization Technical Barriers to Trade (TBT) Committee.

  • Standard
    8 pages
    English language
    sale 15% off
ASTM
ASTM F608-22(Test Method)
Standard Test Method for Evaluation of Carpet Embedded Dirt Removal Effectiveness of Household/Commercial Vacuum Cleaners

SIGNIFICANCE AND USE
4.1 This test method provides an indication of the capability of the vacuum cleaner to remove embedded dirt from carpeting. This test method is based upon results of home cleaning tests so that, in most cases, a reasonable correlation exists between home and laboratory results. The amount of dirt picked up in the laboratory test may not be the same as in the home; however, it will show that, in most cases, a vacuum cleaner that performs well in the laboratory will perform well in a home. Laboratory results may differ due to variations in the homes, carpets, dirt, and other factors (see Section 6).  
4.2 In order to provide a uniform basis for measuring the performance described in 1.1, standardized test carpets and a standardized test dirt are employed in this procedure.
SCOPE
1.1 This test method covers only a laboratory test for determining the relative carpet dirt removal effectiveness of household/commercial vacuum cleaners when tested under specified conditions.  
1.2 This test method is applicable to household/commercial types of upright, canister, and combination cleaners.  
1.3 The test method applies to embedded dirt removal from carpets, not the removal of surface litter and debris.  
1.4 The values stated in inch-pound units are to be regarded as standard. The values given in parentheses are mathematical conversions to SI units that are provided for information only and are not considered standard.  
1.5 This standard does not purport to address all of the safety concerns, if any, associated with its use. It is the responsibility of the user of this standard to establish appropriate safety, health, and environmental practices and determine the applicability of regulatory limitations prior to use.  
1.6 This international standard was developed in accordance with internationally recognized principles on standardization established in the Decision on Principles for the Development of International Standards, Guides and Recommendations issued by the World Trade Organization Technical Barriers to Trade (TBT) Committee.

  • Standard
    24 pages
    English language
    sale 15% off
  • Standard
    24 pages
    English language
    sale 15% off
ASTM
ASTM F494-05(2022)(Test Method)
Standard Test Methods for Evaluating Primary Disposable Bag Integrity for Vacuum Cleaners

SIGNIFICANCE AND USE
2.1 These test methods are useful for routine control, design of end-use products, and acceptance testing for conformance to specifications. Good workmanship, seams, and joints that remain strong over a wide range of atmospheric conditions and have the ability to withstand repeated cycles are necessary for satisfactory end use to the consumer.
SCOPE
1.1 These test methods cover the evaluation of the integrity of the primary disposable bag used for vacuum cleaners.  
1.2 The intent of these test methods is to verify that the design of the primary disposable bag will perform satisfactorily for the consumer in a wide range of normal use conditions. The filtering capability of the disposable bag is not evaluated with the use of these test methods.  
1.3 The following tests are included:    
Section  
Installation and Removal  
3  
Workmanship  
4  
Durability  
5  
Seams and Joints  
6  
1.4 The values stated in inch-pound units are to be regarded as the standard. The values given in parentheses are for information only.  
1.5 This standard does not purport to address all of the safety concerns, if any, associated with its use. It is the responsibility of the user of this standard to establish appropriate safety, health, and environmental practices and determine the applicability of regulatory limitations prior to use.  
1.6 This international standard was developed in accordance with internationally recognized principles on standardization established in the Decision on Principles for the Development of International Standards, Guides and Recommendations issued by the World Trade Organization Technical Barriers to Trade (TBT) Committee.

  • Standard
    10 pages
    English language
    sale 15% off