EN ISO 8536-3:2009
(Main)Infusion equipment for medical use - Part 3: Aluminium caps for infusion bottles (ISO 8536-3:2009)
Infusion equipment for medical use - Part 3: Aluminium caps for infusion bottles (ISO 8536-3:2009)
ISO 8536-3:2009 specifies aluminium caps for infusion glass bottles which are in accordance with ISO 8536-1.
Infusionsgeräte zur medizinischen Verwendung - Teil 3: Aluminium-Bördelkappen für Infusionsflaschen (ISO 8536-3:2009)
Dieser Teil von ISO 8536 legt Aluminium-Bördelkappen für Infusionsflaschen aus Glas nach ISO 8536-1 fest.
Matériel de perfusion à usage médical - Partie 3: Capsules en aluminium pour flacons de perfusion (ISO 8536-3:2009)
L'ISO 8536-3:2009 spécifie des capsules en aluminium pour flacons de perfusion en verre, conformément à l'ISO 8536-1.
Infuzijska oprema za uporabo v medicini - 3. del: Aluminijeve zaporke za infuzijske steklenice (ISO 8536-3:2009)
General Information
Relations
Standards Content (Sample)
SLOVENSKI STANDARD
01-oktober-2009
1DGRPHãþD
SIST EN ISO 8536-3:2000
SIST EN ISO 8536-3:2000/AC:2000
Infuzijska oprema za uporabo v medicini - 3. del: Aluminijeve zaporke za infuzijske
steklenice (ISO 8536-3:2009)
Infusion equipment for medical use - Part 3: Aluminium caps for infusion bottles (ISO
8536-3:2009)
Infusionsgeräte zur medizinischen Verwendung - Teil 3: Aluminium-Bördelkappen für
Infusionsflaschen (ISO 8536-3:2009)
Matériel de perfusion à usage médical - Partie 3: Capsules en aluminium pour flacons de
perfusion (ISO 8536-3:2009)
Ta slovenski standard je istoveten z: EN ISO 8536-3:2009
ICS:
11.040.20 Transfuzijska, infuzijska in Transfusion, infusion and
injekcijska oprema injection equipment
2003-01.Slovenski inštitut za standardizacijo. Razmnoževanje celote ali delov tega standarda ni dovoljeno.
EUROPEAN STANDARD
EN ISO 8536-3
NORME EUROPÉENNE
EUROPÄISCHE NORM
June 2009
ICS 11.040.20 Supersedes EN ISO 8536-3:1999
English Version
Infusion equipment for medical use - Part 3: Aluminium caps for
infusion bottles (ISO 8536-3:2009)
Matériel de perfusion à usage médical - Partie 3: Capsules Infusionsgeräte zur medizinischen Verwendung - Teil 3:
en aluminium pour flacons de perfusion (ISO 8536-3:2009) Aluminium-Bördelkappen für Infusionsflaschen (ISO 8536-
3:2009)
This European Standard was approved by CEN on 16 May 2009.
CEN members are bound to comply with the CEN/CENELEC Internal Regulations which stipulate the conditions for giving this European
Standard the status of a national standard without any alteration. Up-to-date lists and bibliographical references concerning such national
standards may be obtained on application to the CEN Management Centre or to any CEN member.
This European Standard exists in three official versions (English, French, German). A version in any other language made by translation
under the responsibility of a CEN member into its own language and notified to the CEN Management Centre has the same status as the
official versions.
CEN members are the national standards bodies of Austria, Belgium, Bulgaria, Cyprus, Czech Republic, Denmark, Estonia, Finland,
France, Germany, Greece, Hungary, Iceland, Ireland, Italy, Latvia, Lithuania, Luxembourg, Malta, Netherlands, Norway, Poland, Portugal,
Romania, Slovakia, Slovenia, Spain, Sweden, Switzerland and United Kingdom.
EUROPEAN COMMITTEE FOR STANDARDIZATION
COMITÉ EUROPÉEN DE NORMALISATION
EUROPÄISCHES KOMITEE FÜR NORMUNG
Management Centre: Avenue Marnix 17, B-1000 Brussels
© 2009 CEN All rights of exploitation in any form and by any means reserved Ref. No. EN ISO 8536-3:2009: E
worldwide for CEN national Members.
Contents Page
Foreword .3
Foreword
This document (EN ISO 8536-3:2009) has been prepared by Technical Committee ISO/TC 76 "Transfusion,
infusion and injection equipment for medical and pharmaceutical use" in collaboration with CEN
Sub-sector S02 “Transfusion equipment”, the secretariat of which is held by CMC.
This European Standard shall be given the status of a national standard, either by publication of an identical
text or by endorsement, at the latest by December 2009, and conflicting national standards shall be withdrawn
at the latest by December 2009.
Attention is drawn to the possibility that some of the elements of this document may be the subject of patent
rights. CEN [and/or CENELEC] shall not be held responsible for identifying any or all such patent rights.
This document supersedes EN ISO 8536-3:1999.
According to the CEN/CENELEC Internal Regulations, the national standards organizations of the following
countries are bound to implement this European Standard: Austria, Belgium, Bulgaria, Cyprus, Czech
Republic, Denmark, Estonia, Finland, France, Germany, Greece, Hungary, Iceland, Ireland, Italy, Latvia,
Lithuania, Luxembourg, Malta, Netherlands, Norway, Poland, Portugal, Romania, Slovakia, Slovenia, Spain,
Sweden, Switzerland and the United Kingdom.
Endorsement notice
The text of ISO 8536-3:2009 has been approved by CEN as a EN ISO 8536-3:2009 without any modification.
INTERNATIONAL ISO
STANDARD 8536-3
Third edition
2009-06-01
Infusion equipment for medical use —
Part 3:
Aluminium caps for infusion bottles
Matériel de perfusion à usage médical —
Partie 3: Capsules en aluminium pour flacons de perfusion
Reference number
ISO 8536-3:2009(E)
©
ISO 2009
ISO 8536-3:2009(E)
PDF disclaimer
This PDF file may contain embedded typefaces. In accordance with Adobe's licensing policy, this file may be printed or viewed but
shall not be edited unless the typefaces which are embedded are licensed to and installed on the computer performing the editing. In
downloading this file, parties accept therein the responsibility of not infringing Adobe's licensing policy. The ISO Central Secretariat
accepts no liability in this area.
Adobe is a trademark of Adobe Systems Incorporated.
Details of the software products used to create this PDF file can be found in the General Info relative to the file; the PDF-creation
parameters were optimized for printing. Every care has been taken to ensure that the file is suitable for use by ISO member bodies. In
the unlikely event that a problem relating to it is found, please inform the Central Secretariat at the address given below.
© ISO 2009
All rights reserved. Unless otherwise specified, no part of this publication may be reproduced or utilized in any form or by any means,
electronic or mechanical, including photocopying and microfilm, without permission in writing from either ISO at the address below or
ISO's member body in the country of the requester.
ISO copyright office
Case postale 56 • CH-1211 Geneva 20
Tel. + 41 22 749 01 11
Fax + 41 22 749 09 47
E-mail copyright@iso.org
Web www.iso.org
Published in Switzerland
ii © ISO 2009 – All rights reserved
ISO 8536-3:2009(E)
Foreword
ISO (the International Organization for Standardization) is a worldwide federation of national standards bodies
(ISO member bodies). The work of preparing International Standards is normally carried out through ISO
technical committees. Each member body interested in a subject for which a technical committee has been
established has the right to be represented on that committee. International organizations, governmental and
non-governmental, in liaison with ISO, also take part in the work. ISO collaborates closely with the
International Electrotechnical Commission (IEC) on all matters of electrotechnical standardization.
International Standards are drafted in accordance with the rules given in the ISO/IEC Directives, Part 2.
...
Questions, Comments and Discussion
Ask us and Technical Secretary will try to provide an answer. You can facilitate discussion about the standard in here.