EN ISO 11979-3:2006

Ophthalmic implants - Intraocular lenses - Part 3: Mechanical properties and test methods (ISO 11979-3:2006)

ISO 11979-3:2006 specifies requirements and test methods for certain mechanical properties of intraocular lenses (IOLs).
It is applicable to all types of IOLs intended for implantation in the anterior segment of the human eye, excluding corneal implants, provided that the test method is appropriate to the particular IOL design.

Ophthalmische Implantate - Intraokularlinsen - Teil 3: Mechanische Eigenschaften und Prüfverfahren (ISO 11979-3:2006)

Dieser Teil von ISO 11979 legt Anforderungen und Prüfverfahren für bestimmte mechanische Eigenschaften von Intraokularlinsen (IOLs) fest.
Er gilt  mit der Ausnahme von Hornhautimplantaten  für alle Typen von Intraokularlinsen, die für die Implantation in das vordere Segment des menschlichen Auges vorgesehen sind, sofern das angegebene Verfahren für das fragliche Design geeignet ist.

Implants ophtalmiques - Lentilles intraoculaires - Partie 3: Propriétés mécaniques et méthodes d'essai (ISO 11979-3:2006)

L'ISO 11979-3:2006 spécifie les exigences et les méthodes d'essai élaborées pour certaines propriétés mécaniques des lentilles intraoculaires (LIO).
L'ISO 11979-3:2006 s'applique à tous les types de LIO destinées à une implantation dans le segment antérieur de l'oeil humain, à l'exclusion des implants de la cornée, sous réserve que la méthode d'essai soit appropriée pour un modèle de LIO en particulier.

Očesni vsadki (implantati) - Intraokularne leče - 3. del: Mehanske lastnosti in preskusne metode (ISO 11979-3:2006)

General Information

• Status: Withdrawn
• Publication Date: 30-Apr-2006
• Withdrawal Date: 30-Nov-2012
• ICS: 11.040.70 - Ophthalmic equipment
• Technical Committee: CEN/TC 170 - Ophthalmic optics
• Drafting Committee: CEN/TC 170 - Ophthalmic optics
• Current Stage: 9960 - Withdrawal effective - Withdrawal
• Start Date: 01-Dec-2012
• Completion Date: 01-Dec-2012
• Ref Project: SIST EN ISO 11979-3:2006 - Ophthalmic implants - Intraocular lenses - Part 3: Mechanical properties and test methods (ISO 11979-3:2006)

Relations

• Replaces: EN 13503-3:2000 - Ophthalmic implants - Intraocular lenses - Part 3: Mechanical properties and test methods (ISO 11979-3:1999, modified)
• Effective Date: 22-Dec-2008
• Replaced By: EN ISO 11979-3:2012 - Ophthalmic implants - Intraocular lenses - Part 3: Mechanical properties and test methods (ISO 11979-3:2012)
• Effective Date: 08-Jun-2022

Standards Content (Sample)

SLOVENSKI STANDARD
SIST EN ISO 11979-3:2006
01-julij-2006
1DGRPHãþD
SIST EN 13503-3:2000
2þHVQLYVDGNLLPSODQWDWL,QWUDRNXODUQHOHþHGHO0HKDQVNHODVWQRVWLLQ
SUHVNXVQHPHWRGH,62
Ophthalmic implants - Intraocular lenses - Part 3: Mechanical properties and test
methods (ISO 11979-3:2006)
Ophthalmische Implantate - Intraokularlinsen - Teil 3: Mechanische Eigenschaften und
Prüfverfahren (ISO 11979-3:2006)
Implants ophtalmiques - Lentilles intraoculaires - Partie 3: Propriétés mécaniques et
méthodes d'essai (ISO 11979-3:2006)
Ta slovenski standard je istoveten z: EN ISO 11979-3:2006
ICS:
11.040.70
SIST EN ISO 11979-3:2006 en,fr,de
2003-01.Slovenski inštitut za standardizacijo. Razmnoževanje celote ali delov tega standarda ni dovoljeno.

---------------------- Page: 1 ----------------------

EUROPEAN STANDARD
EN ISO 11979-3
NORME EUROPÉENNE
EUROPÄISCHE NORM
May 2006
ICS 11.040.70 Supersedes EN 13503-3:2000
English Version
Ophthalmic implants - Intraocular lenses - Part 3: Mechanical
properties and test methods (ISO 11979-3:2006)
Implants ophtalmiques - Lentilles intraoculaires - Partie 3: Ophthalmische Implantate - Intraokularlinsen - Teil 3:
Propriétés mécaniques et méthodes d'essai (ISO 11979- Mechanische Eigenschaften und Prüfverfahren (ISO
3:2006) 11979-3:2006)
This European Standard was approved by CEN on 13 April 2006.
CEN members are bound to comply with the CEN/CENELEC Internal Regulations which stipulate the conditions for giving this European
Standard the status of a national standard without any alteration. Up-to-date lists and bibliographical references concerning such national
standards may be obtained on application to the Central Secretariat or to any CEN member.
This European Standard exists in three official versions (English, French, German). A version in any other language made by translation
under the responsibility of a CEN member into its own language and notified to the Central Secretariat has the same status as the official
versions.
CEN members are the national standards bodies of Austria, Belgium, Cyprus, Czech Republic, Denmark, Estonia, Finland, France,
Germany, Greece, Hungary, Iceland, Ireland, Italy, Latvia, Lithuania, Luxembourg, Malta, Netherlands, Norway, Poland, Portugal, Romania,
Slovakia, Slovenia, Spain, Sweden, Switzerland and United Kingdom.
EUROPEAN COMMITTEE FOR STANDARDIZATION
COMITÉ EUROPÉEN DE NORMALISATION
EUROPÄISCHES KOMITEE FÜR NORMUNG
Management Centre: rue de Stassart, 36  B-1050 Brussels
© 2006 CEN All rights of exploitation in any form and by any means reserved Ref. No. EN ISO 11979-3:2006: E
worldwide for CEN national Members.

---------------------- Page: 2 ----------------------

EN ISO 11979-3:2006 (E)





Foreword


This document (EN ISO 11979-3:2006) has been prepared by Technical Committee ISO/TC 172
"Optics and optical instruments" in collaboration with Technical Committee CEN/TC 170
"Ophthalmic optics", the secretariat of which is held by DIN.

This European Standard shall be given the status of a national standard, either by publication of
an identical text or by endorsement, at the latest by November 2006, and conflicting national
standards shall be withdrawn at the latest by November 2006.

This document supersedes EN 13503-3:2000.

According to the CEN/CENELEC Internal Regulations, the national standards organizations of
the following countries are bound to implement this European Standard: Austria, Belgium,
Cyprus, Czech Republic, Denmark, Estonia, Finland, France, Germany, Greece, Hungary,
Iceland, Ireland, Italy, Latvia, Lithuania, Luxembourg, Malta, Netherlands, Norway, Poland,
Portugal, Romania, Slovakia, Slovenia, Spain, Sweden, Switzerland and United Kingdom.


Endorsement notice

The text of ISO 11979-3:2006 has been approved by CEN as EN ISO 11979-3:2006 without any
modifications.

2

---------------------- Page: 3 ----------------------

INTERNATIONAL ISO
STANDARD 11979-3
Second edition
2006-05-01

Ophthalmic implants — Intraocular
lenses —
Part 3:
Mechanical properties and test methods
Implants ophtalmiques — Lentilles intraoculaires —
Partie 3: Propriétés mécaniques et méthodes d'essai




Reference number
ISO 11979-3:2006(E)
©
ISO 2006

---------------------- Page: 4 ----------------------

ISO 11979-3:2006(E)
PDF disclaimer
This PDF file may contain embedded typefaces. In accordance with Adobe's licensing policy, this file may be printed or viewed but
shall not be edited unless the typefaces which are embedded are licensed to and installed on the computer performing the editing. In
downloading this file, parties accept therein the responsibility of not infringing Adobe's licensing policy. The ISO Central Secretariat
accepts no liability in this area.
Adobe is a trademark of Adobe Systems Incorporated.
Details of the software products used to create this PDF file can be found in the General Info relative to the file; the PDF-cre
...