EN 15468:2016/prA1

Laminate floor coverings - Elements with directly applied printing and resin surface layer - Specifications, requirements and test methods

This European Standard specifies characteristics, states requirements and gives test methods for laminate floor coverings (as defined in 3.1).
It includes a classification system, based on EN ISO 10874, providing practical requirements for areas of use and levels of use, to indicate where laminate floor coverings will give satisfactory service and to encourage the consumer to make an informed choice. It also specifies requirements for marking and packaging.
Laminate floor coverings are considered for domestic and commercial levels of use, e.g. in domestic kitchens. This standard does not specify requirements relating to areas that are subject to frequent wetting, such as bathrooms, laundry rooms or saunas.

Laminatböden - Direktbedruckte Elemente mit Kunstharz-Deckschicht - Spezifikationen, Anforderungen und Prüfverfahren

Revêtements de sol stratifiés - Éléments comportant une couche d'impression appliquée directement et une couche de surface à base de résine - Spécifications, exigences et méthodes d'essai

Laminatne talne obloge - Elementi z direktnim nanosom potiska in sloja iz umetne smole - Specifikacije, zahteve in preskusne metode

Standards Content (sample)

SLOVENSKI STANDARD
SIST EN 15468:2016/oprA1:2020
01-julij-2020
Laminatne talne obloge - Elementi z direktnim nanosom potiska in sloja iz umetne
smole - Specifikacije, zahteve in preskusne metode

Laminate floor coverings - Elements with directly applied printing and resin surface layer

- Specifications, requirements and test methods

Laminatböden - Direktbedruckte Elemente mit Kunstharz-Deckschicht - Spezifikationen,

Anforderungen und Prüfverfahren

Revêtements de sol stratifiés - Éléments comportant une couche d'impression appliquée

directement et une couche de surface à base de résine - Spécifications, exigences et

méthodes d'essai
Ta slovenski standard je istoveten z: EN 15468:2016/prA1
ICS:
97.150 Talne obloge Floor coverings
SIST EN 15468:2016/oprA1:2020 en

2003-01.Slovenski inštitut za standardizacijo. Razmnoževanje celote ali delov tega standarda ni dovoljeno.

---------------------- Page: 1 ----------------------
SIST EN 15468:2016/oprA1:2020
---------------------- Page: 2 ----------------------
SIST EN 15468:2016/oprA1:2020
DRAFT
EUROPEAN STANDARD
EN 15468:2016
NORME EUROPÉENNE
EUROPÄISCHE NORM
prA1
July 2020
ICS 97.150
English Version
Laminate floor coverings - Elements with directly applied
printing and resin surface layer - Specifications,
requirements and test methods

Revêtements de sol stratifiés - Éléments comportant Laminatböden - Direktbedruckte Elemente mit

une couche d'impression appliquée directement et une Kunstharz-Deckschicht - Spezifikationen,

couche de surface à base de résine - Spécifications, Anforderungen und Prüfverfahren

exigences et méthodes d'essai

This draft amendment is submitted to CEN members for enquiry. It has been drawn up by the Technical Committee CEN/TC 134.

This draft amendment A1, if approved, will modify the European Standard EN 15468:2016. If this draft becomes an amendment,

CEN members are bound to comply with the CEN/CENELEC Internal Regulations which stipulate the conditions for inclusion of

this amendment into the relevant national standard without any alteration.

This draft amendment was established by CEN in three official versions (English, French, German). A version in any other

language made by translation under the responsibility of a CEN member into its own language and notified to the CEN-CENELEC

Management Centre has the same status as the official versions.

CEN members are the national standards bodies of Austria, Belgium, Bulgaria, Croatia, Cyprus, Czech Republic, Denmark, Estonia,

Finland, France, Germany, Greece, Hungary, Iceland, Ireland, Italy, Latvia, Lithuania, Luxembourg, Malta, Netherlands, Norway,

Poland, Portugal, Republic of North Macedonia, Romania, Serbia, Slovakia, Slovenia, Spain, Sweden, Switzerland, Turkey and

United Kingdom.

Recipients of this draft are invited to submit, with their comments, notification of any relevant patent rights of which they are

aware and to provide supporting documentation.

Warning : This document is not a European Standard. It is distributed for review and comments. It is subject to change without

notice and shall not be referred to as a European Standard.
EUROPEAN COMMITTEE FOR STANDARDIZATION
COMITÉ EUROPÉEN DE NORMALISATION
EUROPÄISCHES KOMITEE FÜR NORMUNG
CEN-CENELEC Management Centre: Rue de la Science 23, B-1040 Brussels

© 2020 CEN All rights of exploitation in any form and by any means reserved Ref. No. EN 15468:2016/prA1:2020 E

worldwide for CEN national Members.
---------------------- Page: 3 ----------------------
SIST EN 15468:2016/oprA1:2020
EN 15468:2016/prA1:2020 (E)
Contents Page

European foreword ...................................................................................................................................................... 3

1 Modification to Clause 1, Scope .................................................................................................................. 4

2 Modification to term 3.3, substrate .......................................................................................................... 4

3 Modification to 4.2, Classification requirements, Table 1 ............................................................... 4

---------------------- Page: 4 ----------------------
SIST EN 15468:2016/oprA1:2020
EN 15468:2016/prA1:2020 (E)
European foreword

This document (EN 15468:2016/prA1:2020) has been prepared by Technical Committee CEN/TC 134

“Resilient, textile and laminate floor covering”, the secretariat of which is held by NBN.

This document is currently submitted to the CEN Enquiry.
This document
...