Resilient floor coverings - Cork floor tiles - Specification

This document specifies the requirements for cork floor coverings made from agglomerated composition cork supplied in tile form which are designed to be used with a factory finish and/or an in situ finish.
Cork floor coverings can be covered with other complementary layers of decorative materials, e.g. decorative cork or wood veneers, with or without applied colours.
This document includes a classification system based on intensity of use which shows where cork floor tiles should give satisfactory service (see EN ISO 10874). It also specifies requirements for marking, labelling and packing.

Elastische Bodenbeläge - Presskorkplatten - Spezifikationen

Diese Europäische Norm legt Anforderungen an Bodenbeläge aus Presskork fest, die in Form von Platten geliefert werden und zur Verwendung mit einem Oberflächenfinish und/oder einer Versiegelung vorgesehen sind.
Kork Bodenbeläge können mit weiteren ergänzenden Schichten mit oder ohne Einfärbungen aus dekorativem Werkstoff beschichtet werden, wie z. B. dekorativem Kork oder Holzfurnieren.
Diese Europäische Norm enthält ein Klassifizierungssystem, das auf Basis der Nutzungsintensität zeigt, wo für Bodenbeläge aus Presskork ein zufriedenstellender Nutzen möglich sein sollte (siehe EN ISO 10874). Sie legt auch Anforderungen an die Kennzeichnung, Etikettierung und Verpackung fest.

Revêtements de sols résilients - Dalles en liège - Spécification

La présente Norme Européenne spécifie les exigences des revêtements de sols en liège constitués d'un aggloméré de liège, livrés sous forme de dalles et destinés à être utilisés avec une finition en usine et/ou une finition in situ.
Les revêtements de sols en liège peuvent être recouverts de couches de matériaux décoratifs complémentaires, par exemple, du liège décoratif ou un placage de bois, avec ou sans colorations.
La présente Norme européenne inclut un système de classification en fonction de l'intensité d'utilisation, qui indique qui indique les cas où il convient que l'utilisation des dalles en liège donne satisfaction (voir EN ISO 10874). Elle spécifie également les exigences relatives au marquage, à l'étiquetage et à l'emballage.

Netekstilne talne obloge - Talne obloge iz plute - Specifikacija

Ta evropski standard določa zahteve za talne obloge iz plute, izdelane iz aglomerirane sestave plute, ki je na voljo v obliki ploščic, namenjenih za tovarniško končno obdelavo in/ali končno obdelavo na mestu uporabe. Talne obloge iz plute je mogoče prekriti z drugimi dopolnilnimi plastmi dekorativnih materialov, npr. z dekorativno pluto ali furnirjem različnih barv ali brez barv. Ta evropski standard zajema sistem razvrščanja na podlagi intenzivnosti uporabe, ki kaže, kje naj bi se talne obloge iz plute zadovoljivo uporabljale (glej standard EN 685). Določa tudi zahteve za označevanje, etiketiranje in pakiranje.

General Information

Status
Published
Publication Date
18-Dec-2018
Current Stage
6060 - Definitive text made available (DAV) - Publishing
Due Date
19-Dec-2018
Completion Date
19-Dec-2018

RELATIONS

Buy Standard

Standard
EN 12104:2019
English language
11 pages
sale 10% off
Preview
sale 10% off
Preview

e-Library read for
1 day

Standards Content (sample)

2003-01.Slovenski inštitut za standardizacijo. Razmnoževanje celote ali delov tega standarda ni dovoljeno.Netekstilne talne obloge - Talne obloge iz plute - SpecifikacijaElastische Bodenbeläge - Presskorkplatten - SpezifikationenRevêtements de sol résilients - Dalles en aggloméré de liège - SpécificationResilient floor coverings - Cork floor tiles - Specification97.150Talne oblogeFloor coverings79.100Pluta in izdelki iz pluteCork and cork productsICS:Ta slovenski standard je istoveten z:EN 12104:2018SIST EN 12104:2019en,fr,de01-marec-2019SIST EN 12104:2019SLOVENSKI

STANDARDSIST EN 12104:20001DGRPHãþD
SIST EN 12104:2019
EUROPEAN STANDARD NORME EUROPÉENNE EUROPÄISCHE NORM
EN 12104
December
t r s z ICS
y {ä s r râ
{ yä s w r Supersedes EN
s t s r vã t r r rEnglish Version

Resilient floor coverings æ Cork floor tiles æ Specification Revêtements de sols résilients æ Dalles en liège æ Spécification

Elastische Bodenbeläge æ Presskorkplatten æ Spezifikationen This European Standard was approved by CEN on

s { October
t r s zä

egulations which stipulate the conditions for giving this European Standard the status of a national standard without any alterationä Upætoædate lists and bibliographical references concerning such national standards may be obtained on application to the CENæCENELEC Management Centre or to any CEN memberä

translation under the responsibility of a CEN member into its own language and notified to the CENæCENELEC Management Centre has the same status as the official versionsä

CEN members are the national standards bodies of Austriaá Belgiumá Bulgariaá Croatiaá Cyprusá Czech Republicá Denmarká Estoniaá Finlandá Former Yugoslav Republic of Macedoniaá Franceá Germanyá Greeceá Hungaryá Icelandá Irelandá Italyá Latviaá Lithuaniaá Luxembourgá Maltaá Netherlandsá Norwayá Polandá Portugalá Romaniaá Serbiaá Slovakiaá Sloveniaá Spainá Swedená Switzerlandá Turkey and United Kingdomä

EUROPEAN COMMITTEE FOR STANDARDIZATION COMITÉ EUROPÉEN DE NORMALISATION EUROPÄISCHES KOMITEE FÜR NORMUNG

CEN-CENELEC Management Centre:
Rue de la Science 23,
B-1040 Brussels

t r s z CEN All rights of exploitation in any form and by any means reserved worldwide for CEN national Membersä Refä Noä EN

s t s r vã t r s z ESIST EN 12104:2019

EN 12104:2018 (E) 2 Contents Page European foreword ....................................................................................................................................................... 3 1 Scope .................................................................................................................................................................... 4 2 Normative references .................................................................................................................................... 4 3 Terms and definitions ................................................................................................................................... 5 4 Requirements ................................................................................................................................................... 5 4.1 General requirements ................................................................................................................................... 5 Table 1 — General requirements ............................................................................................................................ 5 4.2 Classification requirements ........................................................................................................................ 5 Table 2 — Classification requirements ................................................................................................................. 6 5 Marking, labelling and packing .................................................................................................................. 8 Annex A (informative)

Optional properties ....................................................................................................... 9 Annex B (informative)

Supplementary information .................................................................................... 10 Bibliography ................................................................................................................................................................. 11

SIST EN 12104:2019

EN 12104:2018 (E) 3 European foreword This document (EN 12104:2018) has been prepared by Technical Committee CEN/TC 134 “Floor coverings”, the secretariat of which is held by NBN. This European Standard shall be given the status of a national standard, either by publication of an identical text or by endorsement, at the latest by June 2019, and conflicting national standards shall be withdrawn at the latest by June 2019. Attention is drawn to the possibility that some of the elements of this document may be the subject of patent rights. CEN shall not be held responsible for identifying any or all such patent rights. This document supersedes EN 12104:2000. In comparison with the previous edition, the following technical modifications have been made: — specifications for wear resistance are added to Table 2; — the normative references in Clause 2 have been updated, as well as the informative references in the Bibliography. According to the CEN-CENELEC Internal Regulations, the national standards organisations of the following countries are bound to implement this European Standard: Austria, Belgium, Bulgaria, Croatia, Cyprus, Czech Republic, Denmark, Estonia, Finland, Former Yugoslav Republic of Macedonia, France, Germany, Greece, Hungary, Iceland, Ireland, Italy, Latvia, Lithuania, Luxembourg, Malta, Netherlands, Norway, Poland, Portugal, Romania, Serbia, Slovakia, Slovenia, Spain, Sweden, Switzerland, Turkey and the United Kingdom. SIST EN 12104:2019

EN 12104:2018 (E) 4 1 Scope This document specifies the requirements for cork floor coverings made from agglomerated composition cork supplied in tile form which are designed to be used with a factory finish and/or an in situ finish. Cork floor coverings can be covered with other complementary layers of decorative materials, e.g. decorative cork or wood veneers, with or without applied colours. This document includes a classification system based on intensity of use which shows where cork floor tiles should give satisfactory service (see EN ISO 10874). It also specifies requirements for marking, labelling and packing. 2 Normative references The following documents are referred to in the text in such a way that some or all of their content constitutes requirements of this document. For dated references, only the edition cited applies. For undated references, the latest edition of the referenced document (including any amendments) applies. EN 424, Resilient floor coverings - Determination of the effect of simulated movement of a furniture leg EN 425, Resilient and laminate floor coverings - Castor chair test EN 12466, Resilient floor coverings -

...

Questions, Comments and Discussion

Ask us and Technical Secretary will try to provide an answer. You can facilitate discussion about the standard in here.