EN ISO 10833:2019

Textile floor coverings - Determination of resistance to damage at cut edges using the modified Vettermann drum test (ISO 10833:2017)

ISO 10833:2017 specifies a method to determine the susceptibility of textile floor coverings to mechanical damage at cut edges.
It is applicable to all textile floor coverings both as sheet materials and as tiles.

Textile Bodenbeläge - Bestimmung der Schnittkantenfestigkeit mit der modifizierten Vettermann-Trommelprüfung (ISO 10833:2017)

Dieses Dokument legt ein Verfahren zur Bestimmung der Anfälligkeit von Schnittkanten textiler Bodenbeläge gegenüber mechanischer Beanspruchung fest.
Diese Norm gilt für alle textilen Bodenbeläge, die als Fliesen und Rollenware gefertigt werden.

Revêtements de sol textiles - Détermination de la résistance des joints par l'essai au tambour Vettermann modifié (ISO 10833:2017)

Le présent document spécifie une méthode permettant de déterminer la sensibilité des revêtements de sol textiles à la détérioration mécanique au niveau des joints.
Il est applicable à tous les revêtements de sol textiles, qu'ils soient sous forme de lés ou de dalles.

Tekstilne talne obloge - Ugotavljanje odpornosti rezanih robov proti poškodbam z modificiranim bobnastim preskusom po Vettermannu (ISO 10833:2017)

ISO 10833:2017 določa metodo za določitev občutljivosti tekstilnih talnih oblog na mehanske poškodbe na rezanih robovih.
Uporablja se za vse tekstilne talne obloge, tako v obliki plošč kot ploščic.

General Information

• Status: Published
• Publication Date: 04-Jun-2019
• Withdrawal Date: 30-Dec-2019
• ICS: 97.150 - Floor coverings
• Technical Committee: CEN/TC 134 - Resilient and textile floor coverings
• Drafting Committee: CEN/TC 134/WG 8 - Textile floor coverings
• Current Stage: 6060 - Definitive text made available (DAV) - Publishing
• Start Date: 05-Jun-2019
• Due Date: 28-Aug-2020
• Completion Date: 05-Jun-2019
• Directive: 305/2011 - Regulation (eu) No 305/2011 of the European Parliament and of the Council of 9 march 2011 laying down harmonised conditions for the marketing of construction products and repealing council directive 89/106/eec
• Ref Project: SIST EN ISO 10833:2019 - Textile floor coverings - Determination of resistance to damage at cut edges using the modified Vettermann drum test (ISO 10833:2017)

Relations

• Replaces: EN 1814:2005 - Textile floor coverings - Determination of resistance to damage at cut edges using the modified Vettermann drum test
• Effective Date: 14-Mar-2018

Standards Content (Sample)

SLOVENSKI STANDARD
SIST EN ISO 10833:2019
01-september-2019
Nadomešča:
SIST EN 1814:2006
Tekstilne talne obloge - Ugotavljanje odpornosti rezanih robov proti poškodbam z
modificiranim bobnastim preskusom po Vettermannu (ISO 10833:2017)
Textile floor coverings - Determination of resistance to damage at cut edges using the
modified Vettermann drum test (ISO 10833:2017)
Textile Bodenbeläge - Bestimmung der Schnittkantenfestigkeit mit der modifizierten
Vettermann-Trommelprüfung (ISO 10833:2017)
Revêtements de sol textiles - Détermination de la résistance des joints par l'essai au
tambour Vettermann modifié (ISO 10833:2017)
Ta slovenski standard je istoveten z: EN ISO 10833:2019
ICS:
97.150 Talne obloge Floor coverings
SIST EN ISO 10833:2019 en,fr,de
2003-01.Slovenski inštitut za standardizacijo. Razmnoževanje celote ali delov tega standarda ni dovoljeno.

---------------------- Page: 1 ----------------------

SIST EN ISO 10833:2019

---------------------- Page: 2 ----------------------

SIST EN ISO 10833:2019


EN ISO 10833
EUROPEAN STANDARD

NORME EUROPÉENNE

June 2019
EUROPÄISCHE NORM
ICS 97.150 Supersedes EN 1814:2005
English Version

Textile floor coverings - Determination of resistance to
damage at cut edges using the modified Vettermann drum
test (ISO 10833:2017)
Revêtements de sol textiles - Détermination de la Textile Bodenbeläge - Bestimmung der
résistance des joints par l'essai au tambour Schnittkantenfestigkeit mit der modifizierten
Vettermann modifié (ISO 10833:2017) Vettermann-Trommelprüfung (ISO 10833:2017)
This European Standard was approved by CEN on 8 April 2019.

CEN members are bound to comply with the CEN/CENELEC Internal Regulations which stipulate the conditions for giving this
European Standard the status of a national standard without any alteration. Up-to-date lists and bibliographical references
concerning such national standards may be obtained on application to the CEN-CENELEC Management Centre or to any CEN
member.

This European Standard exists in three official versions (English, French, German). A version in any other language made by
translation under the responsibility of a CEN member into its own language and notified to the CEN-CENELEC Management
Centre has the same status as the official versions.

CEN members are the national standards bodies of Austria, Belgium, Bulgaria, Croatia, Cyprus, Czech Republic, Denmark, Estonia,
Finland, Former Yugoslav Republic of Macedonia, France, Germany, Greece, Hungary, Iceland, Ireland, Italy, Latvia, Lithuania,
Luxembourg, Malta, Netherlands, Norway, Poland, Portugal, Romania, Serbia, Slovakia, Slovenia, Spain, Sweden, Switzerland,
Turkey and United Kingdom.





EUROPEAN COMMITTEE FOR STANDARDIZATION
COMITÉ EUROPÉEN DE NORMALISATION

EUROPÄISCHES KOMITEE FÜR NORMUNG

CEN-CENELEC Management Centre: Rue de la Science 23, B-1040 Brussels
© 2019 CEN All rights of exploitation in any form and by any means reserved Ref. No. EN ISO 10833:2019 E
worldwide for CEN national Members.

---------------------- Page: 3 ----------------------

SIST EN ISO 10833:2019
EN ISO 10833:2019 (E)
Contents Page
European foreword . 3

2

---------------------- Page: 4 ----------------------

SIST EN ISO 10833:2019
EN ISO 10833:2019 (E)
European foreword
The text of ISO 10833:2017 has been prepared by Technical Committee ISO/TC 219 "Floor coverings” of
the International Organization for Standardization (ISO) and has been taken over as EN ISO 10833:2019
by Technical Committee CEN/TC 134 “Resilient, textile and laminate floor coverings” the secretariat of
which is held by NBN.
This European Standard shall be given the status of a national standard, either by publication of an
identical text or by endorsement, at the latest by December 2019, and conflicting national standards
shall be withdrawn at the latest by December 2019.
Attention is drawn to the possibility that some of the elements of this document may be the subject of
patent rights. CEN shall not be held responsible for identifying any or all such patent rights.
This document supersedes EN 1814:2005.
According to the CEN-CENELEC Internal Regulations, the national standards organizations of the
following countries are bound to implement this European Standard: Austria, Belgium, Bulgaria,
Croatia, Cyprus, Czech Republic, Denmark, Estonia, Finland, Former Yugoslav Republic of Macedonia,
France, Germany, Greece, Hungary, Iceland, Ireland, Italy, Latvia, Lithuania, Luxembourg, Malta,
Netherlands, Norway, Poland, Portugal, Romania, Serbia, Slovakia, Slovenia, Spain, Sweden, Switzerland,
Turkey and the United Kingdom.
Endorsement notice
The text of ISO 10833:2017 has been approved by CEN as EN ISO 10833:2019 without any modification.


3

---------------------- Page:
...