prEN IEC 63182-4:2021

Magnetic powder cores - Guidelines on dimensions and the limits of surface irregularities - Part 4: Block-cores

This part of IEC 63182 specifies the preferred range of the dimensions that are important for mechanical interchangeability and the guidelines on allowable limits of surface irregularities for block-cores made of metallic magnetic powder. This document is a specification about surface irregularities which is useful in the negotiations between suppliers and users of magnetic powder core. The use of "derived" standards which give more detailed specifications of component parts while still permitting compliance with this standard is discussed in Annex A.

Magnetpulverkerne – Richtlinien zu Maßen und Grenzen von Oberflächenbeschädigungen – Teil 4: Blockkerne

Noyaux en poudre magnétique - Lignes directrices concernant les dimensions et les limites des irrégularités de surface - Partie 4: Noyaux en blocs

Jedra iz magnetnega prahu - Smernice o merah in mejnih vrednostih površinskih nepravilnosti - 4. del: Blokovna jedra

General Information

• Status: Not Published
• ICS: 29.100.10 - Magnetic components
• Technical Committee: CLC/SR 51 - Magnetic components and ferrite materials
• Drafting Committee: IEC/TC 51 - IEC_TC_51
• Current Stage: 4020 - Enquiry circulated
• Due Date: 11-Jun-2021
• Completion Date: 11-Jun-2021
• Ref Project: oSIST prEN IEC 63182-4:2021 - Magnetic powder cores - guidelines on dimensions and the limits of surface irregularities - Part 4: Block-cores

Standards Content (sample)

SLOVENSKI STANDARD
oSIST prEN IEC 63182-4:2021
01-september-2021
Jedra iz magnetnega prahu - Smernice o merah in mejnih vrednostih površinskih
nepravilnosti - 4. del: Blokovna jedra

Magnetic powder cores - guidelines on dimensions and the limits of surface irregularities

- Part 4: Block-cores

Noyaux en poudre magnétique - Lignes directrices concernant les dimensions et les

limites des irrégularités de surface - Partie 4: Noyaux en blocs
Ta slovenski standard je istoveten z: prEN IEC 63182-4:2021
ICS:
29.100.10 Magnetne komponente Magnetic components
oSIST prEN IEC 63182-4:2021 en

2003-01.Slovenski inštitut za standardizacijo. Razmnoževanje celote ali delov tega standarda ni dovoljeno.

---------------------- Page: 1 ----------------------
oSIST prEN IEC 63182-4:2021
---------------------- Page: 2 ----------------------
oSIST prEN IEC 63182-4:2021
51/1373/CDV
COMMITTEE DRAFT FOR VOTE (CDV)
PROJECT NUMBER:
IEC 63182-4 ED1
DATE OF CIRCULATION: CLOSING DATE FOR VOTING:
2021-06-11 2021-09-03
SUPERSEDES DOCUMENTS:
51/1344/CD, 51/1354/CC
IEC TC 51 : MAGNETIC COMPONENTS, FERRITE AND MAGNETIC POWDER MATERIALS
SECRETARIAT: SECRETARY:
Japan Mr Takeshi Abe
OF INTEREST TO THE FOLLOWING COMMITTEES: PROPOSED HORIZONTAL STANDARD:
Other TC/SCs are requested to indicate their interest, if any,
in this CDV to the secretary.
FUNCTIONS CONCERNED:
EMC ENVIRONMENT QUALITY ASSURANCE SAFETY

SUBMITTED FOR CENELEC PARALLEL VOTING NOT SUBMITTED FOR CENELEC PARALLEL VOTING

Attention IEC-CENELEC parallel voting
The attention of IEC National Committees, members of
CENELEC, is drawn to the fact that this Committee Draft for
Vote (CDV) is submitted for parallel voting.
The CENELEC members are invited to vote through the
CENELEC online voting system.

This document is still under study and subject to change. It should not be used for reference purposes.

Recipients of this document are invited to submit, with their comments, notification of any relevant patent rights of which they

are aware and to provide supporting documentation.
TITLE:

Magnetic powder cores – guidelines on dimensions and the limits of surface irregularities–

Part 4: Block-cores
PROPOSED STABILITY DATE: 2027
NOTE FROM TC/SC OFFICERS:

Copyright © 2021 International Electrotechnical Commission, IEC. All rights reserved. It is permitted to download this

electronic file, to make a copy and to print out the content for the sole purpose of preparing National Committee positions.

You may not copy or "mirror" the file or printed version of the document, or any part of it, for any other purpose without

permission in writing from IEC.
---------------------- Page: 3 ----------------------
oSIST prEN IEC 63182-4:2021
63182-4/Ed.1/CDV©IEC(E) 2 51/1373/CDV
1 CONTENTS

2 FOREWORD ........................................................................................................................... 3

3 1 Scope .............................................................................................................................. 5

4 2 Normative references ...................................................................................................... 5

5 3 Terms and definitions ...................................................................................................... 5

6 4 Primary dimensions ......................................................................................................... 5

7 5 Limits of surface irregularities .......................................................................................... 6

8 5.1 Definition of surface irregularities ............................................................................ 6

9 5.2 Examples of surface irregularities ........................................................................... 6

10 5.3 Chips and Ragged edges ........................................................................................ 7

11 5.3.1 General ........................................................................................................... 7

12 5.3.2 Chips ............................................................................................................... 7

13 5.3.3 Ragged edges ................................................................................................. 7

14 5.4 Cracks .................................................................................................................... 7

15 5.5 Flash ...................................................................................................................... 7

16 5.6 Rust ........................................................................................................................ 7

17 5.7 Discoloration ........................................................................................................... 7

18 Annex A (normative) Derived standards ............................................................................... 8

19 Figure 1 – Main dimensions of block-cores ............................................................................. 5

20 Figure 2 – Examples of surface irregularities .......................................................................... 7

21 Table 1 – Main dimensions of block-cores .............................................................................. 6

---------------------- Page: 4 ----------------------
oSIST prEN IEC 63182-4:2021
51/1373/CDV 3 63182-4/Ed.1/CDV©IEC(E)
22 INTERNATIONAL ELECTROTECHNICAL COMMISSION
24 MAGNETIC POWDER CORES – GUIDELINES ON DIMENSIONS
25 AND THE LIMITS OF SURFACE IRREGULARITIES –
26 Part 4: Block-cores
27 FOREWORD

28 1) The International Electrotechnical Commission (IEC) is a worldwide organization for standardization comprising

29 all national electrotechnical committees (IEC National Committees). The object of IEC is to promote international

30 co-operation on all questions concerning standardization in the electrical and electronic fields. To this end and

31 in addition to other activities, IEC publishes International Standards, Technical Specifications, Technical Reports,

32 Publicly Available Specifications (PAS) and Guides (hereafter referred to as “IEC Publication(s)”). Their

33 preparation is entrusted to technical committees; any IEC National Committee interested in the subject dealt with

34 may participate in this preparatory work. International, governmental and non-governmental organizations liaising

35 with the IEC also participate in this preparation. IEC collaborates closely with the International Organization for

36 Standardization (ISO) in accordance with conditions determined by agreement between the two organizations.

37 2) The formal decisions or agreements of IEC on technical matters express, as nearly as possible, an international

38 consensus of opinion on the relevant subjects since each technical committee has representation from all

39 interested IEC National Committees.

40 3) IEC Publications have the form of recommendations for international use and are accepted by IEC National

41 Committees in that sense. While all reasonable efforts are made to ensure that the technical content of IEC

42 Publications is accurate, IEC cannot be held responsible for the way in which they are used or for any

43 misinterpretation by any end user.

44 4) In order to promote international uniformity, IEC National Committees undertake to apply IEC Publications

45 transparently to the maximum extent possible in their national and regional publications. Any divergence between

46 any IEC Publication and the corresponding national or regional publication shall be clearly indicated in the latter.

47 5) IEC itself does not provide any attestation of conformity. Independent certification bodies provide conformity

48 assessment services and, in some areas, access to IEC marks of conformity. IEC is not responsible for any

49 services carried out by independent certification bodies.

50 6) All users should ensure that they have the latest edition of this publication.

51 7) No liability shall attach to IEC or its directors, employees, servants or agents including individual experts and

52 members of its technical committees and IEC National Committees for any personal injury, property damage or

53 other damage of any nature whatsoever, whether direct or indirect, or for costs (including legal fees) and

54 expenses arising out of the publication, use of, or reliance upon, this IEC Publication or any other IEC Publications.

55 8) Attention is drawn to the Normative references cited in this publication. Use of the referenced publications is

56 indispensable for the correct application of this publication.

57 9) Attention is drawn to the possibility that some of the elements of this IEC Publication may be the subject of patent

58 rights. IEC shall not be held responsible for identifying any or all such patent rights.

59 IEC 63182-4 has been prepared by IEC technical committee 51
...