EN IEC 62025-2:2019

High frequency inductive components - Non-electrical characteristics and measuring methods - Part 2: Test methods for non-electrical characteristics

IEC 62025-2:2019 is available as IEC 62025-2:2019 RLV which contains the International Standard and its Redline version, showing all changes of the technical content compared to the previous edition.IEC 62025-2:2019 specifies a test method for the non-electrical characteristics of the surface mounted device (SMD) inductors to be used for electronic and telecommunication equipment. The object of this part of this document is to define methods for measuring mechanical performance only. As the reliability performances and specifications relative to non-electrical performances are defined in IEC 62211, detailed measuring methods for mechanical performance of reliability testing are defined in this document. This edition includes the following significant technical changes with respect to the previous edition: - revision of Table 5; - revision of normative references.

Induktive Hochfrequenzbauelemente - Nichtelektrische Eigenschaften und Messmethoden - Teil 2: Messverfahren für nichtelektrische Eigenschaften

Composants inductifs à haute fréquence - Caractéristiques non électriques et méthodes de mesure - Partie 2: Méthodes d'essai pour caractéristiques non électriques

IEC 62025-2:2019 est disponible sous forme de IEC 62025-2:2019 RLV qui contient la Norme internationale et sa version Redline, illustrant les modifications du contenu technique depuis l'édition précédente.L’IEC 62025-2:2019 spécifie une méthode d’essai pour les caractéristiques non électriques pour inductances à montage en surface (CMS) utilisées pour les équipements électroniques et de télécommunications. L’objet du présent document concerne uniquement les méthodes de mesure de la performance mécanique. Comme les performances de fiabilité ainsi que les spécifications relatives aux performances non électriques sont spécifiées dans l’IEC 62211, les méthodes de mesures détaillées pour les performances mécaniques des essais de fiabilité sont définies dans le présent document. Cette édition inclut les modifications techniques majeures suivantes par rapport à l'édition précédente: - révision du Tableau 5; - révision des références normatives.

Visokofrekvenčne induktivne komponente - Neelektrične karakteristike in merilne metode - 2. del: Preskusne metode za neelektrične karakteristike

General Information

• Status: Published
• Publication Date: 14-Nov-2019
• Withdrawal Date: 24-Oct-2022
• ICS: 29.100.10 - Magnetic components
• Technical Committee: CLC/SR 51 - Magnetic components and ferrite materials
• Drafting Committee: IEC/TC 51 - IEC_TC_51
• Current Stage: 6060 - Document made available - Publishing
• Start Date: 15-Nov-2019
• Completion Date: 15-Nov-2019
• Ref Project: SIST EN IEC 62025-2:2021 - High frequency inductive components - Non-electrical characteristics and measuring methods - Part 2: Test methods for non-electrical characteristics

Relations

• Replaces: EN 62025-2:2005 - High frequency inductive components - Non-electrical characteristics and measuring methods - Part 2: Test methods for non-electrical characteristics
• Effective Date: 23-Jan-2023

Standards Content (Sample)

SLOVENSKI STANDARD
SIST EN IEC 62025-2:2021
01-junij-2021
Nadomešča:
SIST EN 62025-2:2005
Visokofrekvenčne induktivne komponente - Neelektrične karakteristike in merilne
metode - 2. del: Preskusne metode za neelektrične karakteristike
High frequency inductive components - Non-electrical characteristics and measuring
methods - Part 2: Test methods for non-electrical characteristics
Induktive Hochfrequenzbauelemente - Nichtelektrische Eigenschaften und
Messmethoden - Teil 2: Messverfahren für nichtelektrische Eigenschaften
Composants inductifs à haute fréquence - Caractéristiques non électriques et méthodes
de mesure - Partie 2: Méthodes d'essai pour caractéristiques non électriques
Ta slovenski standard je istoveten z: EN IEC 62025-2:2019
ICS:
29.100.10 Magnetne komponente Magnetic components
SIST EN IEC 62025-2:2021 en
2003-01.Slovenski inštitut za standardizacijo. Razmnoževanje celote ali delov tega standarda ni dovoljeno.

---------------------- Page: 1 ----------------------
SIST EN IEC 62025-2:2021

---------------------- Page: 2 ----------------------
SIST EN IEC 62025-2:2021


EUROPEAN STANDARD EN IEC 62025-2

NORME EUROPÉENNE

EUROPÄISCHE NORM
November 2019
ICS 29.100.10 Supersedes EN 62025-2:2005 and all of its amendments
and corrigenda (if any)
English Version
High frequency inductive components - Non-electrical
characteristics and measuring methods - Part 2: Test methods
for non-electrical characteristics
(IEC 62025-2:2019)
Composants inductifs à haute fréquence - Caractéristiques Induktive Hochfrequenzbauelemente - Nichtelektrische
non électriques et méthodes de mesure - Partie 2: Eigenschaften und Messmethoden - Teil 2: Messverfahren
Méthodes d'essai pour caractéristiques non électriques für nichtelektrische Eigenschaften
(IEC 62025-2:2019) (IEC 62025-2:2019)
This European Standard was approved by CENELEC on 2019-10-25. CENELEC members are bound to comply with the CEN/CENELEC
Internal Regulations which stipulate the conditions for giving this European Standard the status of a national standard without any alteration.
Up-to-date lists and bibliographical references concerning such national standards may be obtained on application to the CEN-CENELEC
Management Centre or to any CENELEC member.
This European Standard exists in three official versions (English, French, German). A version in any other language made by translation
under the responsibility of a CENELEC member into its own language and notified to the CEN-CENELEC Management Centre has the
same status as the official versions.
CENELEC members are the national electrotechnical committees of Austria, Belgium, Bulgaria, Croatia, Cyprus, the Czech Republic,
Denmark, Estonia, Finland, France, Germany, Greece, Hungary, Iceland, Ireland, Italy, Latvia, Lithuania, Luxembourg, Malta, the
Netherlands, Norway, Poland, Portugal, Republic of North Macedonia, Romania, Serbia, Slovakia, Slovenia, Spain, Sweden, Switzerland,
Turkey and the United Kingdom.


European Committee for Electrotechnical Standardization
Comité Européen de Normalisation Electrotechnique
Europäisches Komitee für Elektrotechnische Normung
CEN-CENELEC Management Centre: Rue de la Science 23, B-1040 Brussels
© 2019 CENELEC All rights of exploitation in any form and by any means reserved worldwide for CENELEC Members.
 Ref. No. EN IEC 62025-2:2019 E

---------------------- Page: 3 ----------------------
SIST EN IEC 62025-2:2021
EN IEC 62025-2:2019 (E)
European foreword
The text of document 51/1273/CDV, future edition 2 of IEC 62025-2, prepared by IEC/TC 51
"Magnetic components, ferrite and magnetic powder materials" was submitted to the IEC-CENELEC
parallel vote and approved by CENELEC as EN IEC 62025-2:2019.
The following dates are fixed:
• latest date by which the document has to be implemented at national (dop) 2020-07-25
level by publication of an identical national standard or by endorsement
• latest date by which the national standards conflicting with the (dow) 2022-10-25
document have to be withdrawn

This document supersedes EN 62025-2:2005 and all of its amendments and corrigenda (if any).
Attention is drawn to the possibility that some of the elements of this document may be the subject of
patent rights. CENELEC shall not be held responsible for identifying any or all such patent rights.

Endorsement notice
The text of the International Standard IEC 62025-2:2019 was approved by CENELEC as a European
Standard without any modification.


2

---------------------- Page: 4 ----------------------
SIST EN IEC 62025-2:2021
EN IEC 62025-2:2019 (E)
Annex ZA
(normative)

Normative references to international publications
with their corresponding European publications
The following documents are referred to in the text in such a way that some or all of their content
constitutes requirements of this document. For dated references, only the edition cited applies. For
undated referen
...