prEN IEC 60794-1-101:2023

Optical fibre cables - Part 1-101: Generic specification - Basic optical cable test procedures - Mechanical tests methods - Tensile, method E1

IEC 60794-1-101:2024 applies to optical fibre cables for use with telecommunication equipment and devices employing similar techniques, and to cables having a combination of both optical fibres and electrical conductors. This document defines test procedures to be used in establishing uniform requirements for tensile performance. Throughout this document the wording "optical cable" includes optical fibre units, microduct fibre units, etc. See IEC 60794-1-2 for general requirements and definitions and for a complete reference guide to test methods of all types.

Lichtwellenleiterkabel - Teil 1-101: Fachgrundspezifikation - Grundlegende Prüfverfahren für Lichtwellenleiterkabel - Mechanische Prüfverfahren - Zugversuch, Verfahren E1

Câbles à fibres optiques - Partie 1-101: Spécification générique - Procédures fondamentales d’essais des câbles optiques - Méthodes d’essais mécaniques - Traction, méthode E1

L'IEC 60794-1-101:2024 s'applique aux câbles à fibres optiques destinés à être utilisés dans les équipements de télécommunications et les dispositifs utilisant des techniques analogues, ainsi qu'aux câbles constitués de fibres optiques d'une part et de conducteurs électriques d'autre part. Le présent document définit les procédures d'essai à utiliser en vue d'établir des exigences uniformes pour les performances en traction. Dans le présent document, l'expression "câble optique" englobe des assemblages de fibres optiques, des assemblages de fibres pour microconduits, etc. Se reporter à l'IEC 60794-1-2 pour les exigences générales et les définitions, et un guide de référence complet pour tous les types de méthodes d'essai.

Optični kabli - 1-101. del: Splošna specifikacija - Osnovni preskusni postopki za optične kable - Mehanske preskusne metode - Natezno, metoda E1

General Information

• Status: Not Published
• Publication Date: 09-Mar-2025
• ICS: 33.180.10 - Fibres and cables
• Technical Committee: CLC/TC 86A - Optical fibres and optical fibre cables
• Current Stage: 4060 - Enquiry results established and sent to TC, SR, BTTF - Enquiry
• Start Date: 10-Nov-2023
• Completion Date: 10-Nov-2023
• Ref Project: oSIST prEN IEC 60794-1-101:2023 - Optical fibre cables - Part 1-101: Generic specification - Basic optical cable test procedures - Mechanical tests methods - Tensile, method E1

Standards Content (Sample)

SLOVENSKI STANDARD
oSIST prEN IEC 60794-1-101:2023
01-oktober-2023
Optični kabli - 1-101. del: Splošna specifikacija - Osnovni preskusni postopki za
optične kable - Mehanske preskusne metode - Natezno, metoda E1
Optical fibre cables - Part 1-101: Generic specification - Basic optical cable test
procedures - Mechanical tests methods - Tensile, method E1
Câbles à fibres optiques - Partie 1-101: Spécification générique - Procédures
fondamentales d’essais des câbles optiques - Méthodes d’essai mécanique - Traction,
méthode E1
Ta slovenski standard je istoveten z: prEN IEC 60794-1-101:2023
ICS:
33.180.10 (Optična) vlakna in kabli Fibres and cables
oSIST prEN IEC 60794-1-101:2023 en
2003-01.Slovenski inštitut za standardizacijo. Razmnoževanje celote ali delov tega standarda ni dovoljeno.

---------------------- Page: 1 ----------------------
oSIST prEN IEC 60794-1-101:2023

---------------------- Page: 2 ----------------------
oSIST prEN IEC 60794-1-101:2023
86A/2359/CDV
COMMITTEE DRAFT FOR VOTE (CDV)

PROJECT NUMBER:
IEC 60794-1-101 ED1
DATE OF CIRCULATION: CLOSING DATE FOR VOTING:
2023-08-18 2023-11-10
SUPERSEDES DOCUMENTS:
86A/2306/CD, 86A/2351/CC

IEC SC 86A : FIBRES AND CABLES
SECRETARIAT: SECRETARY:
France Mr Laurent Gasca
OF INTEREST TO THE FOLLOWING COMMITTEES: PROPOSED HORIZONTAL STANDARD:


Other TC/SCs are requested to indicate their interest, if
any, in this CDV to the secretary.
FUNCTIONS CONCERNED:
EMC ENVIRONMENT QUALITY ASSURANCE SAFETY
SUBMITTED FOR CENELEC PARALLEL VOTING NOT SUBMITTED FOR CENELEC PARALLEL VOTING
Attention IEC-CENELEC parallel voting
The attention of IEC National Committees, members of
CENELEC, is drawn to the fact that this Committee Draft
for Vote (CDV) is submitted for parallel voting.
The CENELEC members are invited to vote through the
CENELEC online voting system.

This document is still under study and subject to change. It should not be used for reference purposes.
Recipients of this document are invited to submit, with their comments, notification of any relevant patent rights
of which they are aware and to provide supporting documentation.
Recipients of this document are invited to submit, with their comments, notification of any relevant “In So me
Countries” clauses to be included should this proposal proceed. Recipients are reminded that the CDV stage is
the final stage for submitting ISC clauses. (SEE AC/22/2007 OR NEW GUIDANCE DOC).

TITLE:
Optical fibre cables - Part 1-101: Generic specification - Basic optical cable test procedures -
Mechanical tests methods - Tensile, method E1

PROPOSED STABILITY DATE: 2026

NOTE FROM TC/SC OFFICERS:


Copyright © 2023 International Electrotechnical Commission, IEC. All rights reserved. It is permitted to
download this electronic file, to make a copy and to print out the content for the sole purpose of preparing
National Committee positions. You may not copy or "mirror" the file or printed version of the document, or any
part of it, for any other purpose without permission in writing from IEC.

---------------------- Page: 3 ----------------------
oSIST prEN IEC 60794-1-101:2023
IEC 60794-1-101/Ed1 © IEC 2023 2 86A/2359/CDV

1 CONTENTS
2
3 FOREWORD . 3
4 1 Scope . 6
5 2 Normative references . 6
6 3 Terms and definitions . 6
7 4 Method E1: Tensile performance . 6
8 4.1 Object . 6
9 4.2 Sample length . 7
10 4.3 Apparatus . 7
11 4.4 Procedure . 8
12 4.4.1 General requirements and preparation . 8
13 4.4.2 Procedure . 9
14 4.5 Requirements . 9
15 4.6 Details to be specified . 9
16 4.7 Details to be reported . 9
17
18 Figure 1 – Tensile performance measuring apparatus.
...