ETSI TS 119 164-2 V2.1.1 (2016-06)

Electronic Signatures and Infrastructures (ESI); Associated Signature Containers (ASiC) - Testing Conformance and Interoperability; Part 2: Test suites for testing interoperability of ASiC baseline containers

RTS/ESI-0019164-2

General Information

• Status: Published
• Publication Date: 28-Jun-2016
• Technical Committee: ESI - Electronic Signatures and Infrastructures
• Current Stage: 12 - Completion
• Due Date: 22-Jul-2016
• Completion Date: 29-Jun-2016
• Mandate: M/460

Standards Content (Sample)

ETSI TS 119 164-2 V2.1.1 (2016-06)






TECHNICAL SPECIFICATION
Electronic Signatures and Infrastructures (ESI);
Associated Signature Containers (ASiC) -
Testing Conformance and Interoperability;
Part 2: Test suites for testing interoperability
of ASiC baseline containers

---------------------- Page: 1 ----------------------
2 ETSI TS 119 164-2 V2.1.1 (2016-06)



Reference
RTS/ESI-0019164-2
Keywords
ASiC, e-commerce, electronic signature,
interoperability, security, testing
ETSI
650 Route des Lucioles
F-06921 Sophia Antipolis Cedex - FRANCE

Tel.: [phone]  Fax: [phone]

Siret N° 348 623 562 00017 - NAF 742 C
Association à but non lucratif enregistrée à la
Sous-Préfecture de Grasse (06) N° 7803/88

Important notice
The present document can be downloaded from:
http://www.etsi.org/standards-search
The present document may be made available in electronic versions and/or in print. The content of any electronic and/or
print versions of the present document shall not be modified without the prior written authorization of ETSI. In case of any
existing or perceived difference in contents between such versions and/or in print, the only prevailing document is the
print of the Portable Document Format (PDF) version kept on a specific network drive within ETSI Secretariat.
Users of the present document should be aware that the document may be subject to revision or change of status.
Information on the current status of this and other ETSI documents is available at
https://portal.etsi.org/TB/ETSIDeliverableStatus.aspx
If you find errors in the present document, please send your comment to one of the following services:
https://portal.etsi.org/People/CommiteeSupportStaff.aspx
Copyright Notification
No part may be reproduced or utilized in any form or by any means, electronic or mechanical, including photocopying
and microfilm except as authorized by written permission of ETSI.
The content of the PDF version shall not be modified without the written authorization of ETSI.
The copyright and the foregoing restriction extend to reproduction in all media.

© European Telecommunications Standards Institute 2016.
All rights reserved.

TM TM TM
DECT , PLUGTESTS , UMTS and the ETSI logo are Trade Marks of ETSI registered for the benefit of its Members.
TM
3GPP and LTE™ are Trade Marks of ETSI registered for the benefit of its Members and
of the 3GPP Organizational Partners.
GSM® and the GSM logo are Trade Marks registered and owned by the GSM Association.
ETSI

---------------------- Page: 2 ----------------------
3 ETSI TS 119 164-2 V2.1.1 (2016-06)
Contents
Intellectual Property Rights . 4
Foreword . 4
Modal verbs terminology . 4
1 Scope . 5
2 References . 5
2.1 Normative references . 5
2.2 Informative references . 6
3 Definitions and abbreviations . 6
3.1 Definitions . 6
3.2 Abbreviations . 6
4 ASiC baseline container interoperability test specification overview . 6
5 Test suite for testing interoperability of ASiC-S baseline containers . 7
5.1 Introduction to testing ASiC-S baseline containers . 7
5.2 Test cases common to all ASiC-S forms and levels . 7
5.3 Test cases for ASiC-S baseline containers with CAdES signatures . 8
5.3.1 Positive test cases . 8
5.3.2 Negative test cases for ASiC-S baseline containers with CAdES signatures . 8
5.4 Test cases for ASiC-S baseline containers with XAdES signatures . 9
5.4.1 Positive test cases . 9
5.4.2 Negative test cases for ASiC-S baseline containers with XAdES signatures . 9
6 Test suite for testing interoperability of ASiC-E baseline containers . 10
6.1 Introduction to testing ASiC-E baseline containers . 10
6.2 Test cases common to all ASiC-E forms and levels . 10
6.3 Test cases for ASiC-E baseline containers with XAdES signatures . 11
6.3.1 Positive test cases . 11
6.3.2 Negative test cases for ASiC-E baseline containers with XAdES signatures . 12
7 Test-suite for augmentation of ASiC baseline containers . 12
Annex A (informative): Bibliography . 13
History . 14

ETSI

---------------------- Page: 3 ----------------------
4 ETSI TS 119 164-2 V2.1.1 (2016-06)
Intellectual Property Rights
IPRs essential or potentially essential to the present document may have been declared to ETSI. The information
pertaining to these essential IPRs, if any, is publicly available for ETSI members and non-members, and can be found
in ETSI SR 000 314: "Intellectual Property Rights (IPRs); Essential, or potentially Essential, IPRs notified to ETSI in
respect of ETSI standards", which is available from the ETSI Secretariat. Latest updates are available on the ETSI Web
server (https://ipr.etsi.org/).
Pursuant to the ETSI IPR Policy, no investigation, including IPR searches, has been carried out by ETSI. No guarantee
can be given as to the existence of other IPRs not referenced in ETSI SR 000 314 (or the updates on the ETSI Web
server) which are, or may be, or may become, essential to the present document.
Foreword
This Technical Specification (TS) has been produced by ETSI Technical Committee Electronic Signatures and
Infrastructures (ESI).
The present document is part 2 of a multi-part deliverable covering Associated Signature Containers (ASiC) - Testing
Conformance and Interoperability. Full details of the entire series can be found in part 1 [i.2].
Modal verbs terminology
In the present document "shall", "shall not", "should", "should not", "may", "need not", "will", "will not", "can" and
"cannot" are to be interpreted as described in clause 3.2 of the ETSI Drafting Rules (Verbal forms for the expression of
provisions).
"must" and "must not" are NOT allowed in ETSI deliverables except when used in direct citation.
ETSI

---------------------- Page: 4 ----------------------
5 ETSI TS 119 164-2 V2.1.1 (2016-06)
1 Scope
The present document defines a number of test suites to assess the interoperability between implementations claiming
conformance to ASiC baseline containers as specified in ETSI EN 319 162-1 [1].
The test suites are defined with four different layers reflecting the four different levels of ASiC baseline containers.
• Tests suite addressing interoperability between applications claiming B-B level conformance.
• Tests suite addressing interoperability between applications claiming B-T level conformance.
• Tests suite addressing interoperability between applications claiming B-LT level conformance.
• Tests suite addressing interoperability between applications claiming B-LTA level conformance.
• Test suites also cover augmentation of ASiC baseline containers and negative test cases.
These test suites are agnostic of the PKI infrastructure. Any PKI infrastructure can be used including the one based on
EU Member States Trusted Lists.
2 References
2.1 Normative references
References are either specific (identified by date of publication and/or edition number or version number) or
non-specific. For specific references, only the cited version applies. For non-specific references, the latest version of the
referenced document (including any amendments) applies.
Referenced documents which are not found to be publicly available in the expected location might be found at
http://docbox.etsi.org/Reference.
NOTE: While any hyperlinks included in this clause were valid at the time of publication ETSI cannot guarantee
their long term validity.
The following referenced documents are necessary for the application of the present document.
[1] ETSI EN 319 162-1: "Electronic Signatures and Infrastructures (ESI); Associated Signature
Containers (ASiC); Part 1: Building blocks and ASiC baseline containers".
[2] ETSI EN 319 122-1: "Electronic Signatures and Infrastructures (ESI); CAdES digital signatures;
Part 1: Building blocks and CAdES baseline signatures".
[3] ETSI EN 319 132-1: "Electronic Signatures and Infrastructures (ESI); XAdES digital signatures;
Part 1: Building blocks and XAdES baseline signatures".
[4] ETSI TS 119 124-2: "Electronic Signatures and Infrastructures (ESI); CAdES digital signatures -
Testing Conformance and Interoperability; Part 2: Test suites for testing interoperability of CAdES
baseline signatures".
[5] ETSI TS 119 134-2: "Electronic Signatures and Infrastructures (ESI); XAdES digital signatures -
Testing Conformance and Interoperability; Part 2: Test suites for testing interoperability of
XAdES baseline signatures".
[6] ISO/IEC 21320-1: "Information technology -- Document Container File -- Part 1: Core".
ETSI

---------------------- Page: 5 ----------------------
6 ETSI TS 119 164-2 V2.1.1 (2016-06)
2.2 Informative references
References are either specific (identified by date of publication and/or edition number or version number) or
non-specific. For specific references, only the cited version applies. For non-specific references, the latest version of the
referenced document (including any amendments) applies.
NOTE: While any hyperlinks included in this clause were valid at the time of publication, ETSI cannot guarantee
their long term validity.
The following referenced documents are not necessary for the application of the present document but they assist the
user with regard to a particular subject area.
[i.1] ETSI TR 119 001: "Electronic Signatures and Infrastructures (ESI); The framework for
standardization of signatures; Definitions and abbreviations".
[i.2] ETSI TR 119 164-1: "Electronic Signatures and Infrastructures (ESI); Associated Signature
Containers (ASiC) - Testing Conformance and Interoperability; Part 1: Overview".
[i.3] ETSI EN 319 102-1: "Electronic Signatures and Infrastructures (ESI); Procedures for Creation and
Validation of AdES Digital Signatures; Part 1: Creation and Validation".
[i.4] ETSI EN 319 122-1: "Electronic Signatures and Infrastructures (ESI); CAdES digital signatures;
Part 1: Building blocks and CAdES baseline signatures".
[i.5] ETSI EN 319 132-1: "Electronic Signatures and Infrastructures (ESI); XAdES digital signatures;
Part 1: Building blocks and XAdES baseline signatures".
3 Definitions and abbreviations
3.1 Definitions
For the purposes of the present document, the terms and definitions given in ETSI TR 119 001 [i.1] and the following
apply:
negative test case: test case either for a container including signature(s) that are not CAdES baseline signatures [i.4] or
XAdES baseline signatures [i.5], or for a signature whose validation according to ETSI EN 319 102-1 [i.3] would not
result in TOTAL_PASSED
3.2 Abbreviations
For the purposes of the present document, the abbreviations given in ETSI TR 119 001 [i.1] and the following apply:
BCS Baseline Container Structure
BSC Baseline Syntactical Conformance
STV Signature Time-stamp token Value
TC Test Case
4 ASiC baseline container interoperability test
specification overview
This clause describes the overall approach used to specify test suites for ASiC baseline containers interoperability
testing.
ETSI EN 319 162-1 [1] defines different forms and, for each, four levels of ASiC baseline containers.
ETSI

---------------------- Page: 6 ----------------------
7 ETSI TS 119 164-2 V2.1.1 (2016-06)
The test suites are defined with different forms and layers reflecting the ASiC baseline containers specified in [1] and,
for the signature test suites, reference to the appropriate CAdES test suites ETSI TS 119 124-2 [4] and XAdES test
suites ETSI TS 119 134-2 [5] is made:
• Testing ASiC-S and ASiC-E containers interoperability between applications claiming B-B level conformance.
• Testing ASiC-S and ASiC-E containers interoperability between applications claiming B-T level conformance.
• Testing ASiC-S and ASiC-E containers interoperability between applications claiming B-LT level
conformance.
• Testing ASiC-S and ASiC-E containers interoperability between applications claiming B-LTA level
conformance.
• Testing augmentation of ASiC containers from B-T level to B-LTA level.
• Negative test cases for ASiC-S and ASiC-E baseline containers:
- ASiC B-B level containers test cases.
- ASiC B-T level containers test cases.
- ASiC B-LTA level containers test cases.
5 Test suite for testing interoperability of ASiC-S
baseline containers
5.1 Introduction to testing ASiC-S baseline containers
In clause 5 all the ASiC-S test cases necessary for testing conformance to each baseline level are specified.
In clause 5.2 the test cases common to all ASiC-S forms and levels are specified. In clauses 5.3 and 5.4 the test cases for
each level are specified.
5.2 Test cases common to all ASiC-S forms and levels
The test cases common to all ASiC-S baseline containers are specified in Table 1.
Table 1: Test cases common to all ASiC-S baseline containers
TC ID Description Pass criteria Interop. Level
ASiC-S/BCS/1 This test case tests if the The container content shall comply with Baseline Container
container ZIP format is correct. ISO/IEC 21320-1 [6] and be successfully Structure
extracted.
ASiC-S/BCS/2 Verify if the container format is The container extension shall be ".asics". Baseline Container
identifiable. Structure
ASiC-S/BCS/3 mimetype is set appropriately. mimetype value shall comply with ASiC [1], Baseline Container
Prerequisites: clauses 4.3.3.1, point 2) b) and A.1. Structure
• ASiC-S/BCS/1 and
ASiC-S/BCS/2 passed;
• mimetype is present.
ASiC-S/BCS/4 This test case tests that a A META-INF folder in the root folder shall be Baseline Container
signature is present in the present and contain one signature.p7s file Structure
container. (ASiC [1], clause 4.3.3.2 item 3b) or
signatures.xml file (ASiC [1], clause 4.3.3.2,
item 3c).
ASiC-S/BCS/5 Presence of the signed file. A single file, in addition to the optional Baseline Container
mimetype, shall be present in the root folder. Structure

ETSI

---------------------- Page: 7 ----------------------
8 ETSI TS 119
...