ETSI EN 302 885-3 V1.2.1 (2014-03)

Electromagnetic compatibility and Radio spectrum Matters (ERM); Portable Very High Frequency (VHF) radiotelephone equipment for the maritime mobile service operating in the VHF bands with integrated handheld class D DSC; Part 3: Harmonized EN covering the essential requirements of article 3.3(e) of the R&TTE Directive

REN/ERM-TG26-104-3

Elektromagnetna združljivost in zadeve v zvezi z radijskim spektrom (ERM) - Prenosna VHF radiotelefonska oprema za pomorsko mobilno storitev, ki deluje v pasovih VHF z vgrajenim ročnim digitalnim selektivnim klicem (DSC) razreda D - 3. del: Harmonizirani EN, ki zajema bistvene zahteve člena 3.3(e) direktive R&TTE

Ta dokument navaja minimalne tehnične karakteristike in merilne metode za prenosne radiotelefone VHF z vgrajenim ročnim digitalnim selektivnim klicem razreda D, ki delujejo v določenih frekvenčnih pasovih, dodeljenih pomorskim mobilnim storitvam, ki uporabljajo kanale 25 kHz ali 25 kHz in 12,5 kHz. Ta dokument določa tudi tehnične karakteristike, merilne metode in zahtevane rezultate preskusov. Ta dokument zajema določila člena 3.3(e) Direktive 1999/5/ES [i.1] (direktiva R&TTE), ki navaja, da mora biti radijska oprema v okviru področja uporabe tega dokumenta »... skonstruirana tako, da ... (e) podpira določene funkcije, ki zagotavljajo dostop do storitev za nujne primere, ...« Poleg tega dokumenta se za opremo s področja uporabe tega dokumenta uporabljajo tudi drugi evropski standardi EN, ki določajo tehnične zahteve v zvezi z bistvenimi zahtevami iz drugih delov člena 3 direktive R&TTE [i.1]. OPOMBA: Seznam tovrstnih evropskih standardov je na voljo na spletnem mestu http://www.newapproach.org/.

General Information

• Status: Published
• Publication Date: 06-Mar-2014
• Technical Committee: ERM TGMARINE - ERM Maritime and radio amateur activities
• Current Stage: 12 - Completion
• Due Date: 19-Sep-2013
• Mandate: M/357
• Ref Project: SIST EN 302 885-3 V1.2.1:2014 - Electromagnetic compatibility and Radio spectrum Matters (ERM) - Portable Very High Frequency (VHF) radiotelephone equipment for the maritime mobile service operating in the VHF bands with integrated handheld class D DSC - Part 3: Harmonized EN covering the essential requirements of article 3.3(e) of the R&TTE Directive

Standards Content (Sample)

SLOVENSKI STANDARD
SIST EN 302 885-3 V1.2.1:2014
01-maj-2014
(OHNWURPDJQHWQD]GUXåOMLYRVWLQ]DGHYHY]YH]L]UDGLMVNLPVSHNWURP(50
3UHQRVQD9+)UDGLRWHOHIRQVNDRSUHPD]DSRPRUVNRPRELOQRVWRULWHYNLGHOXMHY
SDVRYLK9+)]YJUDMHQLPURþQLPGLJLWDOQLPVHOHNWLYQLPNOLFHP'6&UD]UHGD'
GHO+DUPRQL]LUDQL(1NL]DMHPDELVWYHQH]DKWHYHþOHQDHGLUHNWLYH5 77(
Electromagnetic compatibility and Radio spectrum Matters (ERM) - Portable Very High
Frequency (VHF) radiotelephone equipment for the maritime mobile service operating in
the VHF bands with integrated handheld class D DSC - Part 3: Harmonized EN covering
the essential requirements of article 3.3(e) of the R&TTE Directive
Ta slovenski standard je istoveten z: EN 302 885-3 Version 1.2.1
ICS:
33.060.20 Sprejemna in oddajna Receiving and transmitting
oprema equipment
33.100.01 Elektromagnetna združljivost Electromagnetic compatibility
na splošno in general
47.020.70 Navigacijska in krmilna Navigation and control
oprema equipment
SIST EN 302 885-3 V1.2.1:2014 en
2003-01.Slovenski inštitut za standardizacijo. Razmnoževanje celote ali delov tega standarda ni dovoljeno.

---------------------- Page: 1 ----------------------

SIST EN 302 885-3 V1.2.1:2014

---------------------- Page: 2 ----------------------

SIST EN 302 885-3 V1.2.1:2014
ETSI EN 302 885-3 V1.2.1 (2014-03)






Harmonized European Standard
Electromagnetic compatibility and
Radio spectrum Matters (ERM);
Portable Very High Frequency (VHF) radiotelephone
equipment for the maritime mobile service operating
in the VHF bands with integrated handheld class D DSC;
Part 3: Harmonized EN covering the essential requirements
of article 3.3(e) of the R&TTE Directive

---------------------- Page: 3 ----------------------

SIST EN 302 885-3 V1.2.1:2014
 2 ETSI EN 302 885-3 V1.2.1 (2014-03)



Reference
REN/ERM-TG26-104-3
Keywords
DSC, maritime, radio, VHF
ETSI
650 Route des Lucioles
F-06921 Sophia Antipolis Cedex - FRANCE

Tel.: [phone]  Fax: [phone]

Siret N° 348 623 562 00017 - NAF 742 C
Association à but non lucratif enregistrée à la
Sous-Préfecture de Grasse (06) N° 7803/88

Important notice
The present document can be downloaded from:
http://www.etsi.org
The present document may be made available in electronic versions and/or in print. The content of any electronic and/or
print versions of the present document shall not be modified without the prior written authorization of ETSI. In case of any
existing or perceived difference in contents between such versions and/or in print, the only prevailing document is the
print of the Portable Document Format (PDF) version kept on a specific network drive within ETSI Secretariat.
Users of the present document should be aware that the document may be subject to revision or change of status.
Information on the current status of this and other ETSI documents is available at
http://portal.etsi.org/tb/status/status.asp
If you find errors in the present document, please send your comment to one of the following services:
http://portal.etsi.org/chaircor/ETSI_support.asp
Copyright Notification
No part may be reproduced or utilized in any form or by any means, electronic or mechanical, including photocopying
and microfilm except as authorized by written permission of ETSI.
The content of the PDF version shall not be modified without the written authorization of ETSI.
The copyright and the foregoing restriction extend to reproduction in all media.

© European Telecommunications Standards Institute 2014.
All rights reserved.

TM TM TM
DECT , PLUGTESTS , UMTS and the ETSI logo are Trade Marks of ETSI registered for the benefit of its Members.
TM
3GPP and LTE™ are Trade Marks of ETSI registered for the benefit of its Members and
of the 3GPP Organizational Partners.
GSM® and the GSM logo are Trade Marks registered and owned by the GSM Association.
ETSI

---------------------- Page: 4 ----------------------

SIST EN 302 885-3 V1.2.1:2014
 3 ETSI EN 302 885-3 V1.2.1 (2014-03)
Contents
Intellectual Property Rights . 7
Foreword . 7
Introduction . 7
1 Scope . 8
2 References . 8
2.1 Normative references . 8
2.2 Informative references . 8
3 Definitions and abbreviations . 9
3.1 Definitions . 9
3.2 Abbreviations . 9
4 Technical requirements specifications . 9
4.1 Environmental profile . 9
4.2 General, operational and technical requirements . 10
4.2.1 General and operational requirements . 10
4.2.1.1 Requirements . 10
4.2.1.2 Conformance . 10
4.2.2 Technical requirements . 10
4.2.2.1 Requirements . 10
4.2.2.2 Conformance . 10
4.3 Environmental requirements . 10
4.3.1 Drop test . 10
4.3.1.1 Definition . 10
4.3.1.2 Requirement . 10
4.3.1.3 Conformance . 10
4.3.2 Temperature tests . 10
4.3.2.1 Definition . 10
4.3.2.2 Dry heat . 11
4.3.2.2.1 Definition. 11
4.3.2.2.2 Requirement . 11
4.3.2.2.3 Conformance . 11
4.3.2.3 Damp heat . 11
4.3.2.3.1 Definition. 11
4.3.2.3.2 Requirement . 11
4.3.2.3.3 Conformance . 11
4.3.2.4 Low temperature . 11
4.3.2.4.1 Definition. 11
4.3.2.4.2 Requirement . 11
4.3.2.4.3 Conformance . 11
4.4 Conformance requirements . 11
4.4.1 Sensitivity of the modulator, including microphone . 11
4.4.1.1 Definition . 11
4.4.1.2 Limit . 11
4.4.1.3 Conformance . 12
4.4.2 Audio frequency response . 12
4.4.2.1 Definition . 12
4.4.2.2 Limit . 12
4.4.2.3 Conformance . 12
4.4.3 Audio frequency harmonic distortion of the emission . 12
4.4.3.1 Definition . 12
4.4.3.2 Limit . 12
4.4.3.3 Conformance . 12
4.4.4 Residual modulation of the transmitter . 12
4.4.4.1 Definition . 12
ETSI

---------------------- Page: 5 ----------------------

SIST EN 302 885-3 V1.2.1:2014
 4 ETSI EN 302 885-3 V1.2.1 (2014-03)
4.4.4.2 Limit . 12
4.4.4.3 Conformance . 12
4.4.5 Harmonic distortion and rated audio-frequency output power . 12
4.4.5.1 Definition . 12
4.4.5.2 Limit . 12
4.4.5.3 Conformance . 13
4.4.6 Receiver audio frequency response . 13
4.4.6.1 Definition . 13
4.4.6.2 Limit . 13
4.4.6.3 Conformance . 13
4.4.7 Receiver noise and hum level . 13
4.4.7.1 Definition . 13
4.4.7.2 Limit . 13
4.4.7.3 Conformance . 13
4.4.8 Squelch operation . 13
4.4.8.1 Definition . 13
4.4.8.2 Limit . 13
4.4.8.3 Conformance . 13
4.4.9 Squelch hysteresis . 13
4.4.9.1 Definition . 13
4.4.9.2 Limit . 13
4.4.9.3 Conformance . 14
4.4.10 Receiver scanning efficiency . 14
4.4.10.1 Definition . 14
4.4.10.2 Limit . 14
4.4.10.3 Conformance . 14
4.5 DSC Signalling . 14
4.5.1 DSC Call Validation . 14
4.5.2 Display . 14
4.5.3 GNSS receiver . 14
4.5.4 Individual DSC calls . 14
4.5.5 All ships calls . 14
4.5.6 DSC call functionality . 14
4.5.7 DSC message composition . 14
4.5.8 Prioritized wait . 14
4.5.9 Alarms . 15
4.5.10 Standby . 15
4.5.11 GNSS fix - sending distress . 15
4.5.12 Tasks - sending distress . 15
4.5.13 Display - sending distress . 15
4.5.14 Distress button sub procedure . 15
4.5.15 Transmission of the alert attempt . 15
4.5.16 Updating position . 15
4.5.17 Handling received DSC messages - sending distress . 15
4.5.18 Alarms - sending distress . 15
4.5.19 Determining subsequent communications - sending distress . 15
4.5.20 Automated tuning - sending distress . 15
4.5.21 Cancelling the distress alert . 16
4.5.22 Acknowledgements - sending distress . 16
4.5.23 Termination - sending distress . 16
4.5.24 Warnings - sending distress . 16
4.5.25 Tasks - receiving distress . 16
4.5.26 Display - receiving distress . 16
4.5.27 Handling received DSC messages - receiving distress . 16
4.5.28 Alarms - receiving distress . 16
4.5.29 Determining subsequent communications - receiving distress . 16
4.5.30 Automated tuning - receiving distress . 16
4.5.31 Acknowledgements - receiving distress . 16
4.5.32 Termination - receiving distress . 16
4.5.33 Warnings - receiving distress . 16
4.5.34 Tasks - sending non distress . 17
4.5.35 Display - sending non distress . 17
ETSI

---------------------- Page: 6 ----------------------

SIST EN 302 885-3 V1.2.1:2014
 5 ETSI EN 302 885-3 V1.2.1 (2014-03)
4.5.36 Handling received DSC messages - sending non distress . 17
4.5.37 Alarms - sending non distress . 17
4.5.38 Automated tuning - sending non distress . 17
4.5.39 Delayed acknowledgements - sending non distress . 17
4.5.40 Termination - sending non distress . 17
4.5.41 Warnings - sending non distress . 17
4.5.42 Tasks - receiving non distress . 17
4.5.43 Display - receiving non distress . 17
4.5.44 Handling received DSC messages - receiving non distress . 17
4.5.45 Alarms - receiving non distress . 17
4.5.46 Automated tuning - receiving non distress . 17
4.5.47 Acknowledgements - receiving non distress . 18
4.5.48 Termination - receiving non distress . 18
4.5.49 Warnings - receiving non distress . 18
4.5.50 Communication automated procedure . 18
4.5.51 Tasks - communication . 18
4.5.52 Display - communication . 18
4.5.53 Handling received DSC messages - communication . 18
4.5.54 Tuning of the receiver and transmitter - communication . 18
4.5.55 Termination - communication. 18
4.5.56 Tasks of handling incoming calls while engaged . 18
4.5.57 Termination of automated procedures . 18
4.5.58 Actions after termination of an automated procedure . 18
4.5.59 Putting automated procedures on hold . 18
4.5.60 Controlling non-terminated automated procedures on hold . 19
4.5.61 Sending and receiving distress alert scanning . 19
4.5.62 Normal scan . 19
4.5.63 Multiple watch scan . 19
5 Testing for compliance with technical requirements . 19
5.1 Test conditions, power supply and ambient temperatures . 19
5.2 Interpretation of the measurement results . 19
5.3 Essential radio test suites . 20
5.3.1 Environmental tests. 20
5.3.1.1 Introduction . 20
5.3.1.2 Procedure . 20
5.3.1.3 Performance check . 20
5.3.1.4 Drop test . 20
5.3.1.4.1 Definition. 20
5.3.1.4.2 Limit . 20
5.3.1.4.3 Conformance . 20
5.3.1.5 Temperature tests . 21
5.3.1.5.1 Dry heat . 21
5.3.1.5.2 Damp heat . 21
5.3.1.5.3 Low temperature . 21
5.3.2 Conformance tests . 21
5.3.2.1 Sensitivity of the modulator, including microphone .
...

ETSI EN 302 885-3 V1.2.1 (2014-03)






Harmonized European Standard
Electromagnetic compatibility and
Radio spectrum Matters (ERM);
Portable Very High Frequency (VHF) radiotelephone
equipment for the maritime mobile service operating
in the VHF bands with integrated handheld class D DSC;
Part 3: Harmonized EN covering the essential requirements
of article 3.3(e) of the R&TTE Directive

---------------------- Page: 1 ----------------------
2 ETSI EN 302 885-3 V1.2.1 (2014-03)



Reference
REN/ERM-TG26-104-3
Keywords
DSC, maritime, radio, VHF
ETSI
650 Route des Lucioles
F-06921 Sophia Antipolis Cedex - FRANCE

Tel.: [phone]  Fax: [phone]

Siret N° 348 623 562 00017 - NAF 742 C
Association à but non lucratif enregistrée à la
Sous-Préfecture de Grasse (06) N° 7803/88

Important notice
The present document can be downloaded from:
http://www.etsi.org
The present document may be made available in electronic versions and/or in print. The content of any electronic and/or
print versions of the present document shall not be modified without the prior written authorization of ETSI. In case of any
existing or perceived difference in contents between such versions and/or in print, the only prevailing document is the
print of the Portable Document Format (PDF) version kept on a specific network drive within ETSI Secretariat.
Users of the present document should be aware that the document may be subject to revision or change of status.
Information on the current status of this and other ETSI documents is available at
http://portal.etsi.org/tb/status/status.asp
If you find errors in the present document, please send your comment to one of the following services:
http://portal.etsi.org/chaircor/ETSI_support.asp
Copyright Notification
No part may be reproduced or utilized in any form or by any means, electronic or mechanical, including photocopying
and microfilm except as authorized by written permission of ETSI.
The content of the PDF version shall not be modified without the written authorization of ETSI.
The copyright and the foregoing restriction extend to reproduction in all media.

© European Telecommunications Standards Institute 2014.
All rights reserved.

TM TM TM
DECT , PLUGTESTS , UMTS and the ETSI logo are Trade Marks of ETSI registered for the benefit of its Members.
TM
3GPP and LTE™ are Trade Marks of ETSI registered for the benefit of its Members and
of the 3GPP Organizational Partners.
GSM® and the GSM logo are Trade Marks registered and owned by the GSM Association.
ETSI

---------------------- Page: 2 ----------------------
3 ETSI EN 302 885-3 V1.2.1 (2014-03)
Contents
Intellectual Property Rights . 7
Foreword . 7
Introduction . 7
1 Scope . 8
2 References . 8
2.1 Normative references . 8
2.2 Informative references . 8
3 Definitions and abbreviations . 9
3.1 Definitions . 9
3.2 Abbreviations . 9
4 Technical requirements specifications . 9
4.1 Environmental profile . 9
4.2 General, operational and technical requirements . 10
4.2.1 General and operational requirements . 10
4.2.1.1 Requirements . 10
4.2.1.2 Conformance . 10
4.2.2 Technical requirements . 10
4.2.2.1 Requirements . 10
4.2.2.2 Conformance . 10
4.3 Environmental requirements . 10
4.3.1 Drop test . 10
4.3.1.1 Definition . 10
4.3.1.2 Requirement . 10
4.3.1.3 Conformance . 10
4.3.2 Temperature tests . 10
4.3.2.1 Definition . 10
4.3.2.2 Dry heat . 11
4.3.2.2.1 Definition. 11
4.3.2.2.2 Requirement . 11
4.3.2.2.3 Conformance . 11
4.3.2.3 Damp heat . 11
4.3.2.3.1 Definition. 11
4.3.2.3.2 Requirement . 11
4.3.2.3.3 Conformance . 11
4.3.2.4 Low temperature . 11
4.3.2.4.1 Definition. 11
4.3.2.4.2 Requirement . 11
4.3.2.4.3 Conformance . 11
4.4 Conformance requirements . 11
4.4.1 Sensitivity of the modulator, including microphone . 11
4.4.1.1 Definition . 11
4.4.1.2 Limit . 11
4.4.1.3 Conformance . 12
4.4.2 Audio frequency response . 12
4.4.2.1 Definition . 12
4.4.2.2 Limit . 12
4.4.2.3 Conformance . 12
4.4.3 Audio frequency harmonic distortion of the emission . 12
4.4.3.1 Definition . 12
4.4.3.2 Limit . 12
4.4.3.3 Conformance . 12
4.4.4 Residual modulation of the transmitter . 12
4.4.4.1 Definition . 12
ETSI

---------------------- Page: 3 ----------------------
4 ETSI EN 302 885-3 V1.2.1 (2014-03)
4.4.4.2 Limit . 12
4.4.4.3 Conformance . 12
4.4.5 Harmonic distortion and rated audio-frequency output power . 12
4.4.5.1 Definition . 12
4.4.5.2 Limit . 12
4.4.5.3 Conformance . 13
4.4.6 Receiver audio frequency response . 13
4.4.6.1 Definition . 13
4.4.6.2 Limit . 13
4.4.6.3 Conformance . 13
4.4.7 Receiver noise and hum level . 13
4.4.7.1 Definition . 13
4.4.7.2 Limit . 13
4.4.7.3 Conformance . 13
4.4.8 Squelch operation . 13
4.4.8.1 Definition . 13
4.4.8.2 Limit . 13
4.4.8.3 Conformance . 13
4.4.9 Squelch hysteresis . 13
4.4.9.1 Definition . 13
4.4.9.2 Limit . 13
4.4.9.3 Conformance . 14
4.4.10 Receiver scanning efficiency . 14
4.4.10.1 Definition . 14
4.4.10.2 Limit . 14
4.4.10.3 Conformance . 14
4.5 DSC Signalling . 14
4.5.1 DSC Call Validation . 14
4.5.2 Display . 14
4.5.3 GNSS receiver . 14
4.5.4 Individual DSC calls . 14
4.5.5 All ships calls . 14
4.5.6 DSC call functionality . 14
4.5.7 DSC message composition . 14
4.5.8 Prioritized wait . 14
4.5.9 Alarms . 15
4.5.10 Standby . 15
4.5.11 GNSS fix - sending distress . 15
4.5.12 Tasks - sending distress . 15
4.5.13 Display - sending distress . 15
4.5.14 Distress button sub procedure . 15
4.5.15 Transmission of the alert attempt . 15
4.5.16 Updating position . 15
4.5.17 Handling received DSC messages - sending distress . 15
4.5.18 Alarms - sending distress . 15
4.5.19 Determining subsequent communications - sending distress . 15
4.5.20 Automated tuning - sending distress . 15
4.5.21 Cancelling the distress alert . 16
4.5.22 Acknowledgements - sending distress . 16
4.5.23 Termination - sending distress . 16
4.5.24 Warnings - sending distress . 16
4.5.25 Tasks - receiving distress . 16
4.5.26 Display - receiving distress . 16
4.5.27 Handling received DSC messages - receiving distress . 16
4.5.28 Alarms - receiving distress . 16
4.5.29 Determining subsequent communications - receiving distress . 16
4.5.30 Automated tuning - receiving distress . 16
4.5.31 Acknowledgements - receiving distress . 16
4.5.32 Termination - receiving distress . 16
4.5.33 Warnings - receiving distress . 16
4.5.34 Tasks - sending non distress . 17
4.5.35 Display - sending non distress . 17
ETSI

---------------------- Page: 4 ----------------------
5 ETSI EN 302 885-3 V1.2.1 (2014-03)
4.5.36 Handling received DSC messages - sending non distress . 17
4.5.37 Alarms - sending non distress . 17
4.5.38 Automated tuning - sending non distress . 17
4.5.39 Delayed acknowledgements - sending non distress . 17
4.5.40 Termination - sending non distress . 17
4.5.41 Warnings - sending non distress . 17
4.5.42 Tasks - receiving non distress . 17
4.5.43 Display - receiving non distress . 17
4.5.44 Handling received DSC messages - receiving non distress . 17
4.5.45 Alarms - receiving non distress . 17
4.5.46 Automated tuning - receiving non distress . 17
4.5.47 Acknowledgements - receiving non distress . 18
4.5.48 Termination - receiving non distress . 18
4.5.49 Warnings - receiving non distress . 18
4.5.50 Communication automated procedure . 18
4.5.51 Tasks - communication . 18
4.5.52 Display - communication . 18
4.5.53 Handling received DSC messages - communication . 18
4.5.54 Tuning of the receiver and transmitter - communication . 18
4.5.55 Termination - communication. 18
4.5.56 Tasks of handling incoming calls while engaged . 18
4.5.57 Termination of automated procedures . 18
4.5.58 Actions after termination of an automated procedure . 18
4.5.59 Putting automated procedures on hold . 18
4.5.60 Controlling non-terminated automated procedures on hold . 19
4.5.61 Sending and receiving distress alert scanning . 19
4.5.62 Normal scan . 19
4.5.63 Multiple watch scan . 19
5 Testing for compliance with technical requirements . 19
5.1 Test conditions, power supply and ambient temperatures . 19
5.2 Interpretation of the measurement results . 19
5.3 Essential radio test suites . 20
5.3.1 Environmental tests. 20
5.3.1.1 Introduction . 20
5.3.1.2 Procedure . 20
5.3.1.3 Performance check . 20
5.3.1.4 Drop test . 20
5.3.1.4.1 Definition. 20
5.3.1.4.2 Limit . 20
5.3.1.4.3 Conformance . 20
5.3.1.5 Temperature tests . 21
5.3.1.5.1 Dry heat . 21
5.3.1.5.2 Damp heat . 21
5.3.1.5.3 Low temperature . 21
5.3.2 Conformance tests . 21
5.3.2.1 Sensitivity of the modulator, including microphone . 21
5.3.2.2 Audio frequency response . 21
5.3.2.3 Audio frequency harmonic distortion of the emission . 22
5.3.2.4 Residual modulation of the transmitter . 22
5.4 Other test suites . 22
5.4.1 General . 22
5.4.2 Harmonic distortion and rated audio-frequency output power . 22
5.4.3 Receiver audio frequency response . 22
5.4.4 Receiver noise and hum level . 22
5.4.5 Squelch operation . 22
5.4.6 Squel
...

Final draft ETSI EN 302 885-3 V1.2.0 (2013-12)






Harmonized European Standard
Electromagnetic compatibility and
Radio spectrum Matters (ERM);
Portable Very High Frequency (VHF) radiotelephone
equipment for the maritime mobile service operating
in the VHF bands with integrated handheld class D DSC;
Part 3: Harmonized EN covering the essential requirements
of article 3.3(e) of the R&TTE Directive

---------------------- Page: 1 ----------------------
2 Final draft ETSI EN 302 885-3 V1.2.0 (2013-12)



Reference
REN/ERM-TG26-104-3
Keywords
DSC, maritime, radio, VHF
ETSI
650 Route des Lucioles
F-06921 Sophia Antipolis Cedex - FRANCE

Tel.: [phone]  Fax: [phone]

Siret N° 348 623 562 00017 - NAF 742 C
Association à but non lucratif enregistrée à la
Sous-Préfecture de Grasse (06) N° 7803/88

Important notice
Individual copies of the present document can be downloaded from:
http://www.etsi.org
The present document may be made available in more than one electronic version or in print. In any case of existing or
perceived difference in contents between such versions, the reference version is the Portable Document Format (PDF).
In case of dispute, the reference shall be the printing on ETSI printers of the PDF version kept on a specific network drive
within ETSI Secretariat.
Users of the present document should be aware that the document may be subject to revision or change of status.
Information on the current status of this and other ETSI documents is available at
http://portal.etsi.org/tb/status/status.asp
If you find errors in the present document, please send your comment to one of the following services:
http://portal.etsi.org/chaircor/ETSI_support.asp
Copyright Notification
No part may be reproduced except as authorized by written permission.
The copyright and the foregoing restriction extend to reproduction in all media.

© European Telecommunications Standards Institute 2013.
All rights reserved.

TM TM TM
DECT , PLUGTESTS , UMTS and the ETSI logo are Trade Marks of ETSI registered for the benefit of its Members.
TM
3GPP and LTE™ are Trade Marks of ETSI registered for the benefit of its Members and
of the 3GPP Organizational Partners.
GSM® and the GSM logo are Trade Marks registered and owned by the GSM Association.
ETSI

---------------------- Page: 2 ----------------------
3 Final draft ETSI EN 302 885-3 V1.2.0 (2013-12)
Contents
Intellectual Property Rights . 7
Foreword . 7
Introduction . 7
1 Scope . 8
2 References . 8
2.1 Normative references . 8
2.2 Informative references . 8
3 Definitions and abbreviations . 9
3.1 Definitions . 9
3.2 Abbreviations . 9
4 Technical requirements specifications . 9
4.1 Environmental profile . 9
4.2 General, operational and technical requirements . 10
4.2.1 General and operational requirements . 10
4.2.1.1 Requirements . 10
4.2.1.2 Conformance . 10
4.2.2 Technical requirements . 10
4.2.2.1 Requirements . 10
4.2.2.2 Conformance . 10
4.3 Environmental requirements . 10
4.3.1 Drop test . 10
4.3.1.1 Definition . 10
4.3.1.2 Requirement . 10
4.3.1.3 Conformance . 10
4.3.2 Temperature tests . 10
4.3.2.1 Definition . 10
4.3.2.2 Dry heat . 11
4.3.2.2.1 Definition. 11
4.3.2.2.2 Requirement . 11
4.3.2.2.3 Conformance . 11
4.3.2.3 Damp heat . 11
4.3.2.3.1 Definition. 11
4.3.2.3.2 Requirement . 11
4.3.2.3.3 Conformance . 11
4.3.2.4 Low temperature . 11
4.3.2.4.1 Definition. 11
4.3.2.4.2 Requirement . 11
4.3.2.4.3 Conformance . 11
4.4 Conformance requirements . 11
4.4.1 Sensitivity of the modulator, including microphone . 11
4.4.1.1 Definition . 11
4.4.1.2 Limit . 11
4.4.1.3 Conformance . 12
4.4.2 Audio frequency response . 12
4.4.2.1 Definition . 12
4.4.2.2 Limit . 12
4.4.2.3 Conformance . 12
4.4.3 Audio frequency harmonic distortion of the emission . 12
4.4.3.1 Definition . 12
4.4.3.2 Limit . 12
4.4.3.3 Conformance . 12
4.4.4 Residual modulation of the transmitter . 12
4.4.4.1 Definition . 12
ETSI

---------------------- Page: 3 ----------------------
4 Final draft ETSI EN 302 885-3 V1.2.0 (2013-12)
4.4.4.2 Limit . 12
4.4.4.3 Conformance . 12
4.4.5 Harmonic distortion and rated audio-frequency output power . 12
4.4.5.1 Definition . 12
4.4.5.2 Limit . 12
4.4.5.3 Conformance . 13
4.4.6 Receiver audio frequency response . 13
4.4.6.1 Definition . 13
4.4.6.2 Limit . 13
4.4.6.3 Conformance . 13
4.4.7 Receiver noise and hum level . 13
4.4.7.1 Definition . 13
4.4.7.2 Limit . 13
4.4.7.3 Conformance . 13
4.4.8 Squelch operation . 13
4.4.8.1 Definition . 13
4.4.8.2 Limit . 13
4.4.8.3 Conformance . 13
4.4.9 Squelch hysteresis . 13
4.4.9.1 Definition . 13
4.4.9.2 Limit . 13
4.4.9.3 Conformance . 14
4.4.10 Receiver scanning efficiency . 14
4.4.10.1 Definition . 14
4.4.10.2 Limit . 14
4.4.10.3 Conformance . 14
4.5 DSC Signalling . 14
4.5.1 DSC Call Validation . 14
4.5.2 Display . 14
4.5.3 GNSS receiver . 14
4.5.4 Individual DSC calls . 14
4.5.5 All ships calls . 14
4.5.6 DSC call functionality . 14
4.5.7 DSC message composition . 14
4.5.8 Prioritized wait . 14
4.5.9 Alarms . 15
4.5.10 Standby . 15
4.5.11 GNSS fix - sending distress . 15
4.5.12 Tasks - sending distress . 15
4.5.13 Display - sending distress . 15
4.5.14 Distress button sub procedure . 15
4.5.15 Transmission of the alert attempt . 15
4.5.16 Updating position . 15
4.5.17 Handling received DSC messages - sending distress . 15
4.5.18 Alarms - sending distress . 15
4.5.19 Determining subsequent communications - sending distress . 15
4.5.20 Automated tuning - sending distress . 15
4.5.21 Cancelling the distress alert . 16
4.5.22 Acknowledgements - sending distress . 16
4.5.23 Termination - sending distress . 16
4.5.24 Warnings - sending distress . 16
4.5.25 Tasks - receiving distress . 16
4.5.26 Display - receiving distress . 16
4.5.27 Handling received DSC messages - receiving distress . 16
4.5.28 Alarms - receiving distress . 16
4.5.29 Determining subsequent communications - receiving distress . 16
4.5.30 Automated tuning - receiving distress . 16
4.5.31 Acknowledgements - receiving distress . 16
4.5.32 Termination - receiving distress . 16
4.5.33 Warnings - receiving distress . 16
4.5.34 Tasks - sending non distress . 17
4.5.35 Display - sending non distress . 17
ETSI

---------------------- Page: 4 ----------------------
5 Final draft ETSI EN 302 885-3 V1.2.0 (2013-12)
4.5.36 Handling received DSC messages - sending non distress . 17
4.5.37 Alarms - sending non distress . 17
4.5.38 Automated tuning - sending non distress . 17
4.5.39 Delayed acknowledgements - sending non distress . 17
4.5.40 Termination - sending non distress . 17
4.5.41 Warnings - sending non distress . 17
4.5.42 Tasks - receiving non distress . 17
4.5.43 Display - receiving non distress . 17
4.5.44 Handling received DSC messages - receiving non distress . 17
4.5.45 Alarms - receiving non distress . 17
4.5.46 Automated tuning - receiving non distress . 17
4.5.47 Acknowledgements - receiving non distress . 18
4.5.48 Termination - receiving non distress . 18
4.5.49 Warnings - receiving non distress . 18
4.5.50 Communication automated procedure . 18
4.5.51 Tasks - communication . 18
4.5.52 Display - communication . 18
4.5.53 Handling received DSC messages - communication . 18
4.5.54 Tuning of the receiver and transmitter - communication . 18
4.5.55 Termination - communication. 18
4.5.56 Tasks of handling incoming calls while engaged . 18
4.5.57 Termination of automated procedures . 18
4.5.58 Actions after termination of an automated procedure . 18
4.5.59 Putting automated procedures on hold . 18
4.5.60 Controlling non-terminated automated procedures on hold . 19
4.5.61 Sending and receiving distress alert scanning . 19
4.5.62 Normal scan . 19
4.5.63 Multiple watch scan . 19
5 Testing for compliance with technical requirements . 19
5.1 Test conditions, power supply and ambient temperatures . 19
5.2 Interpretation of the measurement results . 19
5.3 Essential radio test suites . 20
5.3.1 Environmental tests. 20
5.3.1.1 Introduction . 20
5.3.1.2 Procedure . 20
5.3.1.3 Performance check . 20
5.3.1.4 Drop test . 20
5.3.1.4.1 Definition. 20
5.3.1.4.2 Limit . 20
5.3.1.4.3 Conformance . 20
5.3.1.5 Temperature tests . 21
5.3.1.5.1 Dry heat . 21
5.3.1.5.2 Damp heat . 21
5.3.1.5.3 Low temperature . 21
5.3.2 Conformance tests . 21
5.3.2.1 Sensitivity of the modulator, including microphone . 21
5.3.2.2 Audio frequency response . 21
5.3.2.3 Audio frequency harmonic distortion of the emission . 22
5.3.2.4 Residual modulation of the transmitter . 22
5.4 Other test suites . 22
5.4.1 General . 22
5.4.2 Harmonic distortion and rated audio-frequency output power . 22
5.4.3 Receiver audio frequency response . 22
5.4.4 Receiver noise and hum level . 22
5.4.5 Squelch operation . 22
5.4.6 Squelch hysteresis . 22
5.4.7 Receiver scanning efficiency .
...

Draft ETSI EN 302 885-3 V1.2.0 (2013-05)






Harmonized European Standard
Electromagnetic compatibility and
Radio spectrum Matters (ERM);
Portable Very High Frequency (VHF) radiotelephone
equipment for the maritime mobile service operating
in the VHF bands with integrated handheld class D DSC;
Part 3: Harmonized EN covering the essential requirements
of article 3.3(e) of the R&TTE Directive

---------------------- Page: 1 ----------------------
2 Draft ETSI EN 302 885-3 V1.2.0 (2013-05)



Reference
REN/ERM-TG26-104-3
Keywords
DSC, maritime, radio, VHF
ETSI
650 Route des Lucioles
F-06921 Sophia Antipolis Cedex - FRANCE

Tel.: [phone]  Fax: [phone]

Siret N° 348 623 562 00017 - NAF 742 C
Association à but non lucratif enregistrée à la
Sous-Préfecture de Grasse (06) N° 7803/88

Important notice
Individual copies of the present document can be downloaded from:
http://www.etsi.org
The present document may be made available in more than one electronic version or in print. In any case of existing or
perceived difference in contents between such versions, the reference version is the Portable Document Format (PDF).
In case of dispute, the reference shall be the printing on ETSI printers of the PDF version kept on a specific network drive
within ETSI Secretariat.
Users of the present document should be aware that the document may be subject to revision or change of status.
Information on the current status of this and other ETSI documents is available at
http://portal.etsi.org/tb/status/status.asp
If you find errors in the present document, please send your comment to one of the following services:
http://portal.etsi.org/chaircor/ETSI_support.asp
Copyright Notification
No part may be reproduced except as authorized by written permission.
The copyright and the foregoing restriction extend to reproduction in all media.

© European Telecommunications Standards Institute 2013.
All rights reserved.

TM TM TM
DECT , PLUGTESTS , UMTS and the ETSI logo are Trade Marks of ETSI registered for the benefit of its Members.
TM
3GPP and LTE™ are Trade Marks of ETSI registered for the benefit of its Members and
of the 3GPP Organizational Partners.
GSM® and the GSM logo are Trade Marks registered and owned by the GSM Association.
ETSI

---------------------- Page: 2 ----------------------
3 Draft ETSI EN 302 885-3 V1.2.0 (2013-05)
Contents
Intellectual Property Rights . 7
Foreword . 7
Introduction . 7
1 Scope . 8
2 References . 8
2.1 Normative references . 8
2.2 Informative references . 8
3 Definitions and abbreviations . 9
3.1 Definitions . 9
3.2 Abbreviations . 9
4 Technical requirements specifications . 9
4.1 Environmental profile . 9
4.2 General, operational and technical requirements . 10
4.2.1 General and operational requirements . 10
4.2.1.1 Requirements . 10
4.2.1.2 Conformance . 10
4.2.2 Technical requirements . 10
4.2.2.1 Requirements . 10
4.2.2.2 Conformance . 10
4.3 Environmental requirements . 10
4.3.1 Drop test . 10
4.3.1.1 Definition . 10
4.3.1.2 Requirement . 10
4.3.1.3 Conformance . 10
4.3.2 Temperature tests . 10
4.3.2.1 Definition . 10
4.3.2.2 Dry heat . 11
4.3.2.2.1 Definition. 11
4.3.2.2.2 Requirement . 11
4.3.2.2.3 Conformance . 11
4.3.2.3 Damp heat . 11
4.3.2.3.1 Definition. 11
4.3.2.3.2 Requirement . 11
4.3.2.3.3 Conformance . 11
4.3.2.4 Low temperature . 11
4.3.2.4.1 Definition. 11
4.3.2.4.2 Requirement . 11
4.3.2.4.3 Conformance . 11
4.4 Conformance requirements . 11
4.4.1 Sensitivity of the modulator, including microphone . 11
4.4.1.1 Definition . 11
4.4.1.2 Limit . 11
4.4.1.3 Conformance . 12
4.4.2 Audio frequency response . 12
4.4.2.1 Definition . 12
4.4.2.2 Limit . 12
4.4.2.3 Conformance . 12
4.4.3 Audio frequency harmonic distortion of the emission . 12
4.4.3.1 Definition . 12
4.4.3.2 Limit . 12
4.4.3.3 Conformance . 12
4.4.4 Residual modulation of the transmitter . 12
4.4.4.1 Definition . 12
ETSI

---------------------- Page: 3 ----------------------
4 Draft ETSI EN 302 885-3 V1.2.0 (2013-05)
4.4.4.2 Limit . 12
4.4.4.3 Conformance . 12
4.4.5 Harmonic distortion and rated audio-frequency output power . 12
4.4.5.1 Definition . 12
4.4.5.2 Limit . 12
4.4.5.3 Conformance . 13
4.4.6 Receiver audio frequency response . 13
4.4.6.1 Definition . 13
4.4.6.2 Limit . 13
4.4.6.3 Conformance . 13
4.4.7 Receiver noise and hum level . 13
4.4.7.1 Definition . 13
4.4.7.2 Limit . 13
4.4.7.3 Conformance . 13
4.4.8 Squelch operation . 13
4.4.8.1 Definition . 13
4.4.8.2 Limit . 13
4.4.8.3 Conformance . 13
4.4.9 Squelch hysteresis . 13
4.4.9.1 Definition . 13
4.4.9.2 Limit . 13
4.4.9.3 Conformance . 14
4.4.10 Receiver scanning efficiency . 14
4.4.10.1 Definition . 14
4.4.10.2 Limit . 14
4.4.10.3 Conformance . 14
4.5 DSC Signalling . 14
4.5.1 DSC Call Validation . 14
4.5.2 Display . 14
4.5.3 GNSS receiver . 14
4.5.4 Individual DSC calls . 14
4.5.5 All ships calls . 14
4.5.6 DSC call functionality . 14
4.5.7 DSC message composition . 14
4.5.8 Prioritized wait . 14
4.5.9 Alarms . 15
4.5.10 Standby . 15
4.5.11 GNSS fix - sending distress . 15
4.5.12 Tasks - sending distress . 15
4.5.13 Display - sending distress . 15
4.5.14 Distress button sub procedure . 15
4.5.15 Transmission of the alert attempt . 15
4.5.16 Updating position . 15
4.5.17 Handling received DSC messages - sending distress . 15
4.5.18 Alarms - sending distress . 15
4.5.19 Determining subsequent communications - sending distress . 15
4.5.20 Automated tuning - sending distress . 15
4.5.21 Cancelling the distress alert . 16
4.5.22 Acknowledgements - sending distress . 16
4.5.23 Termination - sending distress . 16
4.5.24 Warnings - sending distress . 16
4.5.25 Tasks - receiving distress . 16
4.5.26 Display - receiving distress . 16
4.5.27 Handling received DSC messages - receiving distress . 16
4.5.28 Alarms - receiving distress . 16
4.5.29 Determining subsequent communications - receiving distress . 16
4.5.30 Automated tuning - receiving distress . 16
4.5.31 Acknowledgements - receiving distress . 16
4.5.32 Termination - receiving distress . 16
4.5.33 Warnings - receiving distress . 16
4.5.34 Tasks - sending non distress . 17
4.5.35 Display - sending non distress . 17
ETSI

---------------------- Page: 4 ----------------------
5 Draft ETSI EN 302 885-3 V1.2.0 (2013-05)
4.5.36 Handling received DSC messages - sending non distress . 17
4.5.37 Alarms - sending non distress . 17
4.5.38 Automated tuning - sending non distress . 17
4.5.39 Delayed acknowledgements - sending non distress . 17
4.5.40 Termination - sending non distress . 17
4.5.41 Warnings - sending non distress . 17
4.5.42 Tasks - receiving non distress . 17
4.5.43 Display - receiving non distress . 17
4.5.44 Handling received DSC messages - receiving non distress . 17
4.5.45 Alarms - receiving non distress . 17
4.5.46 Automated tuning - receiving non distress . 17
4.5.47 Acknowledgements - receiving non distress . 18
4.5.48 Termination - receiving non distress . 18
4.5.49 Warnings - receiving non distress . 18
4.5.50 Communication automated procedure . 18
4.5.51 Tasks - communication . 18
4.5.52 Display - communication . 18
4.5.53 Handling received DSC messages - communication . 18
4.5.54 Tuning of the receiver and transmitter - communication . 18
4.5.55 Termination - communication. 18
4.5.56 Tasks of handling incoming calls while engaged . 18
4.5.57 Termination of automated procedures . 18
4.5.58 Actions after termination of an automated procedure . 18
4.5.59 Putting automated procedures on hold . 18
4.5.60 Controlling non-terminated automated procedures on hold . 19
4.5.61 Sending and receiving distress alert scanning . 19
4.5.62 Normal scan . 19
4.5.63 Multiple watch scan . 19
5 Testing for compliance with technical requirements . 19
5.1 Test conditions, power supply and ambient temperatures . 19
5.2 Interpretation of the measurement results . 19
5.3 Essential radio test suites . 20
5.3.1 Environmental tests. 20
5.3.1.1 Introduction . 20
5.3.1.2 Procedure . 20
5.3.1.3 Performance check . 20
5.3.1.4 Drop test . 20
5.3.1.4.1 Definition. 20
5.3.1.4.2 Limit . 20
5.3.1.4.3 Conformance . 20
5.3.1.5 Temperature tests . 21
5.3.1.5.1 Dry heat . 21
5.3.1.5.2 Damp heat . 21
5.3.1.5.3 Low temperature . 21
5.3.2 Conformance tests . 21
5.3.2.1 Sensitivity of the modulator, including microphone . 21
5.3.2.2 Audio frequency response . 21
5.3.2.3 Audio frequency harmonic distortion of the emission . 22
5.3.2.4 Residual modulation of the transmitter . 22
5.4 Other test suites . 22
5.4.1 General . 22
5.4.2 Harmonic distortion and rated audio-frequency output power . 22
5.4.3 Receiver audio frequency response . 22
5.4.4 Receiver noise and hum level . 22
5.4.5 Squelch operation . 22
5.4.6 Squelch hysteresis . 22
5.4.7 Receiver scanning efficiency .
...