ETSI EN 300 324-3 V3.1.1 (2001-03)
V interfaces at the digital Local Exchange (LE); V5.1 interface for the support of Access Network (AN); Part 3: Test Suite Structure and Test Purposes (TSS&TP) specification for the network layer (AN side)
V interfaces at the digital Local Exchange (LE); V5.1 interface for the support of Access Network (AN); Part 3: Test Suite Structure and Test Purposes (TSS&TP) specification for the network layer (AN side)
REN/SPAN-09101-3
Vmesniki V pri digitalnih krajevnih centralah (LE) – Vmesnik V5.1 za podporo dostopovnega omrežja (AN) – 3. del: Zgradba preskušalnega niza in namen preskušanja (TSS&TP) za omrežno plast na strani dostopovnega omrežja (AN)
General Information
Standards Content (Sample)
SLOVENSKI STANDARD
SIST EN 300 324-3 V3.1.1:2005
01-januar-2005
Vmesniki V pri digitalnih krajevnih centralah (LE) – Vmesnik V5.1 za podporo
dostopovnega omrežja (AN) – 3. del: Zgradba preskušalnega niza in namen
preskušanja (TSS&TP) za omrežno plast na strani dostopovnega omrežja (AN)
V interfaces at the digital Local Exchange (LE); V5.1 interface for the support of Access
Network (AN); Part 3: Test Suite Structure and Test Purposes (TSS&TP) specification for
the network layer (AN side)
Ta slovenski standard je istoveten z: EN 300 324-3 Version 3.1.1
ICS:
33.040.30 Komutacijski in signalizacijski Switching and signalling
sistem systems
SIST EN 300 324-3 V3.1.1:2005 en
2003-01.Slovenski inštitut za standardizacijo. Razmnoževanje celote ali delov tega standarda ni dovoljeno.
---------------------- Page: 1 ----------------------
SIST EN 300 324-3 V3.1.1:2005
---------------------- Page: 2 ----------------------
SIST EN 300 324-3 V3.1.1:2005
ETSI EN 300 324-3 V3.1.1 (2001-03)
European Standard (Telecommunications series)
V interfaces at the digital Local Exchange (LE);
V5.1 interface for the support of Access Network (AN);
Part 3: Test Suite Structure and Test Purposes (TSS&TP)
specification for the network layer (AN side)
---------------------- Page: 3 ----------------------
SIST EN 300 324-3 V3.1.1:2005
2 ETSI EN 300 324-3 V3.1.1 (2001-03)
Reference
REN/SPAN-09101-3
Keywords
AN, LE, testing, TSS&TP, V interface
ETSI
650 Route des Lucioles
F-06921 Sophia Antipolis Cedex - FRANCE
Tel.: +33492 94 4200 Fax: +33493 65 4716
Siret N° 348 623 562 00017 - NAF 742 C
Association à but non lucratif enregistrée à la
Sous-Préfecture de Grasse (06) N° 7803/88
Important notice
Individual copies of the present document can be downloaded from:
http://www.etsi.org
The present document may be made available in more than one electronic version or in print. In any case of existing or
perceived difference in contents between such versions, the reference version is the Portable Document Format (PDF).
In case of dispute, the reference shall be the printing on ETSI printers of the PDF version kept on a specific network drive
within ETSI Secretariat.
Users of the present document should be aware that the document may be subject to revision or change of status.
Information on the current status of this and other ETSI documents is available at http://www.etsi.org/tb/status/
If you find errors in the present document, send your comment to:
editor@etsi.fr
Copyright Notification
No part may be reproduced except as authorized by written permission.
The copyright and the foregoing restriction extend to reproduction in all media.
© European Telecommunications Standards Institute 2001.
All rights reserved.
ETSI
---------------------- Page: 4 ----------------------
SIST EN 300 324-3 V3.1.1:2005
3 ETSI EN 300 324-3 V3.1.1 (2001-03)
Contents
Intellectual Property Rights .6
Foreword.6
1 Scope.7
2 References.7
3 Definitions and abbreviations.8
3.1 Definitions . 8
3.2 Abbreviations. 9
4 Test Suite Structure (TSS) .10
4.1 TSS overview. 10
4.2 Test groups . 11
4.2.1 Protocol groups. 11
4.2.1.1 Control protocol . 11
4.2.1.2 PSTN protocol. 12
4.2.2 Main test groups . 12
4.2.2.1 Basic Interconnection (IT) tests. 12
4.2.2.2 Capability (CA) tests . 12
4.2.2.3 Valid Behaviour (BV) tests. 12
4.2.2.4 Inopportune Behaviour (BO) tests. 12
4.2.2.5 Invalid Behaviour (BI) tests . 12
4.2.2.6 Timer (TI) expiry and counter mismatch tests. 13
4.2.2.6.1 Timer expiry and counters of the Control protocol . 13
4.2.2.6.2 Timer expiry and counters of the PSTN protocol. 13
4.2.2.6.3 Timer expiry and counters of the AN system management . 13
4.3 Test step structure. 14
4.3.1 State transitions. 14
4.3.1.1 Startup of V5.1 interface. 14
4.3.1.2 Common control protocol (system management). 15
4.3.1.3 Control protocol (PSTN port FSM). 16
4.3.1.4 Control protocol (ISDN-BA port FSM). 16
4.3.1.5 PSTN protocol. 16
4.3.2 Preconditions. 17
4.3.3 Preambles . 17
4.3.4 Postambles. 17
4.3.5 Status verification . 17
4.3.5.1 PSTN protocol. 17
4.3.5.2 Port control protocol. 18
4.3.5.3 Common control protocol . 18
4.3.6 Common test steps. 18
4.4 Defaults . 18
4.5 Abstract Service Primitives (ASPs) and Protocol Data Units (PDUs). 18
4.5.1 ASPs . 18
4.5.2 PDUs. 18
4.5.2.1 Common control protocol . 18
4.5.2.2 Port control protocol. 18
4.5.2.3 PSTN protocol. 19
4.5.3 Information elements . 19
4.5.3.1 Variable length information elements. 19
4.5.3.1.1 Control protocol . 19
4.5.3.1.2 PSTN protocol . 19
4.5.3.2 Single octet information elements . 20
4.5.3.2.1 Control protocol . 20
4.5.3.2.2 PSTN protocol . 20
4.6 Timers and counters of the Abstract Test Suite (ATS). 20
ETSI
---------------------- Page: 5 ----------------------
SIST EN 300 324-3 V3.1.1:2005
4 ETSI EN 300 324-3 V3.1.1 (2001-03)
5 Test Purposes (TPs).21
5.1 Introduction. 21
5.1.1 TP naming convention . 21
5.1.2 Source of TP definition . 21
5.1.3 Test strategy . 22
5.1.4 Requirements not covered by TPs. 22
5.1.5 Initial state. 23
5.1.6 Test and data configuration requirements. 23
5.2 Control protocol . 23
5.2.1 Basic interconnection tests (V5NWKAN/CTRL/IT) . 23
5.2.2 Capability tests (V5NWKAN/CTRL/CA). 23
5.2.3 Valid behaviour tests (V5NWKAN/CTRL/BV) . 24
5.2.3.1 V5NWKAN/CTRL/BV/COM. 24
5.2.3.1.1 V5NWKAN/CTRL/BV/COM/TRANS. 24
5.2.3.1.2 V5NWKAN/CTRL/BV/COM/REST. 24
5.2.3.1.3 V5NWKAN/CTRL/BV/COM/REVY. 25
5.2.3.2 V5NWKAN/CTRL/BV/PORT. 26
5.2.3.2.1 V5NWKAN/CTRL/BV/PORT/TRANS. 26
5.2.3.2.2 V5NWKAN/CTRL/BV/PORT/PSTN. 26
5.2.3.2.3 V5NWKAN/CTRL/BV/PORT/ISDNBA . 28
5.2.4 Inopportune behaviour tests (V5NWKAN/CTRL/BO). 31
5.2.4.1 V5NWKAN/CTRL/BO/COM. 31
5.2.4.1.1 V5NWKAN/CTRL/BO/COM/TRANS. 31
5.2.4.1.2 V5NWKAN/CTRL/BO/COM/REVY. 31
5.2.4.2 V5NWKAN/CTRL/BO/PORT. 31
5.2.4.2.1 V5NWKAN/CTRL/BO/PORT/TRANS. 31
5.2.4.2.2 V5NWKAN/CTRL/BO/PORT/PSTN. 32
5.2.4.2.3 V5NWKAN/CTRL/BO/PORT/ISDNBA . 32
5.2.5 Invalid behaviour tests (V5NWKAN/CTRL/BI) . 33
5.2.5.1 V5NWKAN/CTRL/BI/COM . 33
5.2.5.1.1 V5NWKAN/CTRL/BI/COM/TRANS . 33
5.2.5.2 V5NWKAN/CTRL/BI/PORT . 34
5.2.5.2.1 V5NWKAN/CTRL/BI/PORT/TRANS . 34
5.2.6 Timer expiry and counter mismatch tests (V5NWKAN/CTRL/TI). 35
5.2.6.1 V5NWKAN/CTRL/TI/COM . 35
5.2.6.1.1 V5NWKAN/CTRL/TI/COM/TRANS. 35
5.2.6.2 V5NWKAN/CTRL/TI/PORT . 36
5.2.6.2.1 V5NWKAN/CTRL/TI/PORT/TRANS . 36
5.3 PSTN protocol . 36
5.3.1 Basic interconnection tests (V5NWKAN/PSTN/IT). 36
5.3.2 Capability tests (V5NWKAN/PSTN/CA) . 37
5.3.3 Valid behaviour tests (V5NWKAN/PSTN/BV) . 37
5.3.3.1 V5NWKAN/PSTN/BV/0. 37
5.3.3.2 V5NWKAN/PSTN/BV/1. 38
5.3.3.3 V5NWKAN/PSTN/BV/2. 39
5.3.3.4 V5NWKAN/PSTN/BV/3. 40
5.3.3.5 V5NWKAN/PSTN/BV/4. 41
5.3.3.6 V5NWKAN/PSTN/BV/5. 42
5.3.3.7 V5NWKAN/PSTN/BV/6. 43
5.3.3.8 V5NWKAN/PSTN/BV/7. 44
5.3.4 Inopportune behaviour tests (V5NWKAN/PSTN/BO) . 45
5.3.4.1 V5NWKAN/PSTN/BO/0. 45
5.3.4.2 V5NWKAN/PSTN/BO/1. 46
5.3.4.3 V5NWKAN/PSTN/BO/2. 46
5.3.4.4 V5NWKAN/PSTN/BO/3. 47
5.3.4.5 V5NWKAN/PSTN/BO/4. 47
5.3.4.6 V5NWKAN/PSTN/BO/5. 48
5.3.4.7 V5NWKAN/PSTN/BO/6. 48
5.3.4.8 V5NWKAN/PSTN/BO/7. 49
5.3.5 Invalid behaviour tests (V5NWKAN/PSTN/BI). 49
5.3.5.1 V5NWKAN/PSTN/BI/1 . 49
5.3.5.2 V5NWKAN/PSTN/BI/5 . 50
ETSI
---------------------- Page: 6 ----------------------
SIST EN 300 324-3 V3.1.1:2005
5 ETSI EN 300 324-3 V3.1.1 (2001-03)
5.3.6 Timer expiry and counter mismatch tests (V5NWKAN/PSTN/TI) . 51
5.3.6.1 V5NWKAN/PSTN/TI/2. 51
5.3.6.2 V5NWKAN/PSTN/TI/3. 51
5.3.6.3 V5NWKAN/PSTN/TI/4. 52
5.3.6.4 V5NWKAN/PSTN/TI/5. 52
5.3.6.5 V5NWKAN/PSTN/TI/7. 52
Bibliography.53
History .54
ETSI
---------------------- Page: 7 ----------------------
SIST EN 300 324-3 V3.1.1:2005
6 ETSI EN 300 324-3 V3.1.1 (2001-03)
Intellectual Property Rights
IPRs essential or potentially essential to the present document may have been declared to ETSI. The information
pertaining to these essential IPRs, if any, is publicly available for ETSI members and non-members, and can be found
in ETSI SR 000 314: "Intellectual Property Rights (IPRs); Essential, or potentially Essential, IPRs notified to ETSI in
respect of ETSI standards", which is available from the ETSI Secretariat. Latest updates are available on the ETSI Web
server (http://www.etsi.org/ipr).
Pursuant to the ETSI IPR Policy, no investigation, including IPR searches, has been carried out by ETSI. No guarantee
can be given as to the existence of other IPRs not referenced in ETSI SR 000 314 (or the updates on the ETSI Web
server) which are, or may be, or may become, essential to the present document.
Foreword
This European Standard (Telecommunications series) has been produced by ETSI Technical Committee Services and
Protocols for Advanced Networks (SPAN).
The present document is part 3 of a multi-part deliverable, covering the V5.1 interface at the digital Local Exchange
(LE); V5.1 interface for the support of Access Network (AN), as described below:
Part 1: "V5.1 interface specification";
Part 2: "Protocol Implementation Conformance Statement (PICS) proforma specification";
Part 3: "Test Suite Structure and Test Purposes (TSS&TP) specification for the network layer (AN side)";
Part 4: "Abstract Test Suite (ATS) and partial Protocol Implementation eXtra Information for Testing (PIXIT)
proforma specification for the network layer (AN side)";
Part 5: "Test Suite Structure and Test Purposes (TSS&TP) specification for the network layer (LE side)";
Part 6: "Abstract Test Suite (ATS) and partial Protocol Implementation eXtra Information for Testing (PIXIT)
proforma specification for the network layer (LE side)";
Part 7: "Test Suite Structure and Test Purposes (TSS&TP) specification for the data link layer";
Part 8: "Abstract Test Suite (ATS) and partial Protocol Implementation eXtra Information for Testing (PIXIT)
proforma specification for the data link layer";
Part 9: "Test specification for the physical layer".
National transposition dates
Date of adoption of this EN: 16 March 2001
Date of latest announcement of this EN (doa): 30 June 2001
Date of latest publication of new National Standard
or endorsement of this EN (dop/e): 31 December 2001
Date of withdrawal of any conflicting National Standard (dow): 31 December 2001
ETSI
---------------------- Page: 8 ----------------------
SIST EN 300 324-3 V3.1.1:2005
7 ETSI EN 300 324-3 V3.1.1 (2001-03)
1 Scope
The present document contains the Test Suite Structure (TSS) and Test Purposes (TPs) for the Network layer (NWK)
and parts of the system management of the Access Network (AN) side of a V5.1 interface.
The objective of the present document is to provide conformance tests giving a high probability of inter-operability of
an AN and a Local Exchange (LE) from different manufacturers over the V5.1 interface. The present document covers
only the procedures described in EN 300 324-1 [1].
ISO/IEC 9646-1 [5] is used as the basis for the methodology of conformance testing.
Concerning the Public Switched Telephone Network (PSTN) protocol testing, only the procedures defined in
EN 300 324-1 [1] are covered by the tests defined in the present document. An Implementation Under Test (IUT),
however, will have implemented a national PSTN protocol part as well. This requires that the tester generates messages
containing the national PSTN protocol specific optional Information Elements (IEs), otherwise the IUT would not act
on messages according to the PSTN protocol procedure definition. However, this does not provide a comprehensive test
of the national PSTN protocol mapping specification, which is outside the scope of the present document.
As the tests use PSTN messages containing optional IEs according to national specifications, the test result is only valid
for the implemented national mapping of the V5.1 PSTN protocol.
The present document does not cover tests related to functions of the bearer channel. Those functions should be tested
in conjunction with testing of the national PSTN protocol mapping specification.
The present document contains no requirements concerning NWK tests for Integrated Services Digital Network Basic
Access (ISDN-BA).
2 References
The following documents contain provisions which, through reference in this text, constitute provisions of the present
document.
• References are either specific (identified by date of publication, edition number, version number, etc.) or
non-specific.
• For a specific reference, subsequent revisions do not apply.
• For a non-specific reference, the latest version applies.
• A non-specific reference to an ETS shall also be taken to refer to later versions published as an EN with the same
number.
[1] ETSI EN 300 324-1 (V2.1.1): "V interfaces at the digital Local Exchange (LE); V5.1 interface for
the support of Access Network (AN); Part 1: V5.1 interface specification".
[2] ETSI EN 300 324-2: "V interface at the digital Local Exchange (LE); V5.1 interface for the
support of Access Network (AN); Part 2: Protocol Implementation Conformance Statement (PICS)
proforma specification".
[3] ETSI ETS 300 297 (1995): "Integrated Services Digital Network (ISDN); Access digital section
for ISDN basic access".
[4] ISO 7498-2: "Information processing systems - Open Systems Interconnection - Basic Reference
Model - Part 2: Security Architecture".
[5] ISO/IEC 9646-1: "Information Technology - Open Systems Interconnection - Conformance testing
methodology and framework - Part 1: General concepts".
ETSI
---------------------- Page: 9 ----------------------
SIST EN 300 324-3 V3.1.1:2005
8 ETSI EN 300 324-3 V3.1.1 (2001-03)
3 Definitions and abbreviations
3.1 Definitions
For the purposes of the present document, the following terms and definitions apply, together with those given in
EN 300 324-1 [1]:
Abstract Test Case (ATC): refer to ISO/IEC 9646-1 [5]
Abstract Test Suite (ATS): refer to ISO/IEC 9646-1 [5]
current provisioning variant: identifier for the presently active data set
data link layer: refer to ISO 7498-2 [4]
implementation under test: refer to ISO/IEC 9646-1 [5]
incorrect information element: specified information element carrying information element types not defined in
EN300 324-1 [1]
invalid PSTN information element: pSTN information element not according to national specific requirements
invalid Protocol Data Unit: pDU which contains incorrect message format
invalid PSTN message: pSTN message carrying information elements not according to national specific requirements
lower tester: refer to ISO/IEC 9646-1 [5]
network layer: refer to ISO 7498-2 [4]
network termination: equipment providing the network side at the ISDN user-network interface for the basic access
NOTE: This term is used in the present document to indicate network-terminating aspects of NT1 and NT2.
new provisioning variant: identifier for the data set which was announced to the IUT to become the next active data
set through reprovisioning
physical layer: refer to ISO 7498-2 [4]
Protocol Implementation Conformance Statement: refer to ISO/IEC 9646-1 [5]
PICS proforma: refer to ISO/IEC 9646-1 [5]
specified information element: information element identifier defined in EN 300 324-1 [1]
System Under Test (SUT): refer to ISO/IEC 9646-1 [5]
Test Purpose (TP): refer to ISO/IEC 9646-1 [5]
unknown provisioning variant: identifier for a non-available data set
unspecified Information Element: information element identifier not defined in EN 300 324-1 [1]
valid information element: pSTN information element according to national specific requirements
valid PSTN message: pSTN message carrying information elements according to national specific requirements
ETSI
---------------------- Page: 10 ----------------------
SIST EN 300 324-3 V3.1.1:2005
9 ETSI EN 300 324-3 V3.1.1 (2001-03)
3.2 Abbreviations
For the purposes of the present document, the following abbreviations apply:
AN Access Network
ASP Abstract Service Primitive
ATC AbstractTestCase
ATS Abstract Test Suite
BI Invalid Behaviour
BO Inopportune Behaviour
BV Valid Behaviour
CA Capability
COM Common control protocol
CTRL Control
DSAP Data link Service Access Point
FE Function Element
FSM Finite State Machine
ID Identifier
IE Information Element
ISDN Integrated Services Digital Network
ISDN-BA ISDN Basic Access
IT Basic Interconnection
IUT Implementation Under Test
L3addr Layer 3 address
LE Local Exchange
LT Lower Tester
MDU Management Data Unit
MPH Management Physical Layer
NT Network Termination
NWK Network layer
PDU Protocol Data Unit
PICS Protocol Implementation Conformance Statements
PL Permanent Line
PSTN Public Switched Telephone Network
REST Restart
REVY Verify and Reprovisioning
SUT System Under Test
TE Terminal Equipment (ISDN or PSTN)
TI Timer
TP Test Purpose
TSS Test Suite Structure
UNI User Network Interface
ETSI
------------------
...
Questions, Comments and Discussion
Ask us and Technical Secretary will try to provide an answer. You can facilitate discussion about the standard in here.