Integrated Services Digital Network (ISDN); Digital Subscriber Signalling System No. one (DSS1) protocol; Data link layer; Part 6: Test Suite Structure and Test Purposes (TSS&TP) specification for the general protocol

DE/SPS-05087

Digitalno omrežje z integriranimi storitvami (ISDN) - Protokol digitalne naročniške signalizacije št. 1 (DSS1) - Podatkovna povezovalna plast - 6. del: Zgradba preskušalnega niza in namen preskušanja (TSS&TP) - Specifikacija za splošni protokol

General Information

Status
Published
Publication Date
28-Jan-1997
Current Stage
12 - Completion
Due Date
10-Jan-1997
Completion Date
29-Jan-1997
Mandate

Buy Standard

Standard
ETS 300 402-6:1998
English language
69 pages
sale 10% off
Preview
sale 10% off
Preview
e-Library read for
1 day

Standards Content (Sample)

2003-01.Slovenski inštitut za standardizacijo. Razmnoževanje celote ali delov tega standarda ni dovoljeno.SURWRNROIntegrated Services Digital Network (ISDN); Digital Subscriber Signalling System No. one (DSS1) protocol; Data link layer; Part 6: Test Suite Structure and Test Purposes (TSS&TP) specification for the general protocol35.100.20Podatkovni povezovalni slojData link layer33.080Digitalno omrežje z integriranimi storitvami (ISDN)Integrated Services Digital Network (ISDN)ICS:Ta slovenski standard je istoveten z:ETS 300 402-6 Edition 1SIST ETS 300 402-6:1998en01-junij-1998SIST ETS 300 402-6:1998SLOVENSKI
STANDARD



SIST ETS 300 402-6:1998



EUROPEANETS 300 402-6TELECOMMUNICATIONJanuary 1997STANDARDSource: ETSI TC-SPSReference: DE/SPS-05087ICS:33.020Key words:ISDN, DSS1, layer 2, D-channel, LAPD, testing, TSS&TPIntegrated Services Digital Network (ISDN);Digital Subscriber Signalling System No. one (DSS1) protocol;Data link layer;Part 6: Test Suite Structure and Test Purposes (TSS&TP)specification for the general protocolETSIEuropean Telecommunications Standards InstituteETSI SecretariatPostal address: F-06921 Sophia Antipolis CEDEX - FRANCEOffice address: 650 Route des Lucioles - Sophia Antipolis - Valbonne - FRANCEX.400: c=fr, a=atlas, p=etsi, s=secretariat - Internet: secretariat@etsi.frTel.: +33 4 92 94 42 00 - Fax: +33 4 93 65 47 16Copyright Notification: No part may be reproduced except as authorized by written permission. The copyright and theforegoing restriction extend to reproduction in all media.© European Telecommunications Standards Institute 1997. All rights reserved.SIST ETS 300 402-6:1998



Page 2ETS 300 402-6: January 1997Whilst every care has been taken in the preparation and publication of this document, errors in content,typographical or otherwise, may occur. If you have comments concerning its accuracy, please write to"ETSI Editing and Committee Support Dept." at the address shown on the title page.SIST ETS 300 402-6:1998



Page 3ETS 300 402-6: January 1997ContentsForeword.51Scope.72Normative references.73Definitions.73.1Definitions related to conformance testing.73.2Definitions related to ETS 300 402-2.84Abbreviations.85Test Suite Structure (TSS).96Test purposes (TP).116.1Introduction.116.1.1Test purpose naming convention.116.1.2Source of TP definition.116.1.3TP structure.126.1.4Test strategy.126.2TPs for DSS1 layer 2.136.2.1Layer Management.136.2.1.1User.136.2.1.1.1DL state 1.136.2.1.1.2DL state 3.156.2.1.1.3DL state 4.196.2.1.1.4DL state 5.0.236.2.1.1.5DL state 6.0.246.2.1.1.6DL state 7.0.266.2.1.1.7DL state 8.0.276.2.1.2Network.296.2.1.2.1DL state 1.296.2.1.2.2DL state 4.316.2.1.2.3DL state 5.0.356.2.1.2.4DL state 6.0.356.2.1.2.5DL state 7.0.366.2.1.2.6DL state 8.0.366.2.2Data control.376.2.2.1DL state 4.376.2.2.1.1Valid behaviour.376.2.2.1.2Inopportune behaviour.376.2.2.1.3Syntactically invalid.386.2.2.2DL state 5.0.396.2.2.2.1Valid behaviour.396.2.2.2.2Inopportune behaviour.396.2.2.2.3Syntactically invalid.406.2.2.2.4Timers.416.2.2.3DL state 5.1.416.2.2.3.1Valid behaviour.416.2.2.4DL state 6.0.416.2.2.4.1Valid behaviour.416.2.2.4.2Inopportune behaviour.426.2.2.4.3Syntactically invalid.436.2.2.4.4Timers.43SIST ETS 300 402-6:1998



Page 4ETS 300 402-6: January 19976.2.2.5DL state 7.0.436.2.2.5.1Valid behaviour.436.2.2.5.2Inopportune behaviour.456.2.2.5.3Syntactically invalid.476.2.2.6DL state 7.0 with outstanding I frames.486.2.2.6.1Valid behaviour.486.2.2.6.2Inopportune behaviour.496.2.2.6.3Timers.506.2.2.7DL state 7.1.516.2.2.7.1Valid behaviour.516.2.2.7.2Inopportune behaviour.516.2.2.8DL state 7.4.516.2.2.8.1Valid behaviour.516.2.2.8.2Inopportune behaviour.526.2.2.8.3Syntactically invalid.546.2.2.9DL state 7.4 with outstanding I frames.556.2.2.9.1Valid behaviour.556.2.2.9.2Inopportune behaviour.566.2.2.9.3Timers.566.2.2.10DL state 7.5.586.2.2.10.1Valid behaviour.586.2.2.10.2Inopportune behaviour.586.2.2.11DL state 8.0.586.2.2.11.1Valid behaviour.586.2.2.11.2Inopportune behaviour.596.2.2.11.3Syntactically invalid.616.2.2.12DL state 8.0 with outstanding I frames.626.2.2.12.1Valid behaviour.626.2.2.12.2Inopportune behaviour.626.2.2.12.3Timers.626.2.2.12.4Counters.626.2.2.13DL state 8.1.636.2.2.13.1Valid behaviour.636.2.2.13.2Inopportune behaviour.636.2.2.14DL state 8.4.636.2.2.14.1Valid behaviour.636.2.2.14.2Inopportune behaviour.636.2.2.14.3Syntactically invalid.666.2.2.15DL state 8.4 with outstanding I frames.666.2.2.15.1Valid behaviour.666.2.2.15.2Inopportune behaviour.676.2.2.15.3Timers.676.2.2.15.4Counters.676.2.2.16DL state 8.5.676.2.2.16.1Valid behaviour.676.2.2.16.2Inopportune behaviour.677Compliance.688Requirements for a comprehensive testing service.68History.69SIST ETS 300 402-6:1998



Page 5ETS 300 402-6: January 1997ForewordThis European Telecommunication Standard (ETS) has been produced by the Signalling Protocols andSwitching (SPS) Technical Committee of the European Telecommunications Standards Institute (ETSI).This ETS is part 6 of a multi-part standard covering the Integrated Services Digital Network (ISDN) DigitalSubscriber Signalling System No. one (DSS1) data link layer specification as described below:Part 1:"General aspects [ITU-T Recommendation Q.920 (1993), modified]";Part 2:"General protocol specification [ITU-T Recommendation Q.921 (1993), modified]";Part 3:"Frame relay protocol specification";Part 4:"Protocol Implementation Conformance Statement (PICS) proforma specification for thegeneral protocol";Part 5:"PICS proforma specification for the frame relay protocol";Part 6:"Test Suite Structure and Test Purposes (TSS&TP) specification for the generalprotocol";Part 7:"Abstract Test Suite (ATS) and partial Protocol Implementation eXtra Information for Testing(PIXIT) proforma specification for the general protocol".Transposition datesDate of adoption:20 December 1996Date of latest announcement of this ETS (doa):30 April 1997Date of latest publication of new National Standardor endorsement of this ETS (dop/e):31 October 1997Date of withdrawal of any conflicting National Standard (dow):31 October 1997SIST ETS 300 402-6:1998



Page 6ETS 300 402-6: January 1997Blank pageSIST ETS 300 402-6:1998



Page 7ETS 300 402-6: January 19971ScopeThis sixth part of ETS 300 402 specifies the Test Suite Structure and Test Purposes (TSS&TP) at theT reference point or coincident S and T reference point (as defined in ITU-T Recommendation I.411 [7]) ofimplementations conforming to the standard for the general data link layer protocol of Digital SubscriberSignalling System No. one (DSS1) for the pan-European Integrated Services Digital Network (ISDN),ETS 300 402-2 [1].A further part of this ETS specifies the Abstract Test Suite (ATS) and partial Protocol ImplementationeXtra Information for Testing (PIXIT) proforma based on this ETS.2Normative referencesThis ETS incorporates by dated and undated reference, provisions from other publications. Thesenormative references are cited at the appropriate places in the text and the publications are listedhereafter. For dated references, subsequent amendments to or revisions of any of these publicationsapply to this ETS only when incorporated in it by amendment or revision. For undated references the latestedition of the publication referred to applies.[1]ETS 300 402-2 (1995): "Integrated Services Digital Network (ISDN); DigitalSubscriber Signalling System No. one (DSS1) protocol; Data link layer; Part 2:General protocol specification [ITU-T Recommendation Q.921 (1993),modified]".[2]ETS 300 402-4 (1996): "Integrated Services Digital Network (ISDN); DigitalSubscriber Signalling System No. one (DSS1) protocol; Data link layer; Part 4:Protocol Implementation Conformance statement (PICS) proforma for thegeneral protocol".[3]ISO/IEC 9646-1: "Information Technology - OSI Conformance TestingMethodology and Framework; Part 1: General Concepts".[4]ISO/IEC 9646-2: "Information Technology - OSI Conformance TestingMethodology and Framework; Part 2: Abstract Test Suite Specification".[5]ISO/IEC 9646-3: "Information Technology - OSI Conformance TestingMethodology and Framework; Part 3: The Tree and Tabular CombinedNotation".[6]ITU-T Recommendation I.112 (1993): "Vocabulary of terms for ISDNs".[7]ITU-T Recommendation I.411 (1993): "ISDN user network interfaces - referenceconfigurations".3DefinitionsFor the purposes of this ETS, the following definitions apply, in addition to those given inETS 300 402-2 [1]:3.1Definitions related to conformance testingabstract test case: Refer to ISO/IEC 9646-1 [3].Abstract Test Method (ATM): Refer to ISO/IEC 9646-1 [3].Abstract Test Suite (ATS): Refer to ISO/IEC 9646-1 [3].Implementation Under Test (IUT): Refer to ISO/IEC 9646-1 [3].SIST ETS 300 402-6:1998



Page 8ETS 300 402-6: January 1997implicit send event: Refer to ISO/IEC 9646-3 [5].lower tester: Refer to ISO/IEC 9646-1 [3].point of control and observation: Refer to ISO/IEC 9646-1 [3].Protocol Implementation Conformance Statement (PICS): Refer to ISO/IEC 9646-1 [3].PICS proforma: Refer to ISO/IEC 9646-1 [3].Protocol Implementation eXtra Information for Testing (PIXIT): Refer to ISO/IEC 9646-1 [3].PIXIT proforma: Refer to ISO/IEC 9646-1 [3].system under test: Refer to ISO/IEC 9646-1 [3].Test Purpose (TP): Refer to ISO/IEC 9646-1 [3].3.2Definitions related to ETS 300 402-2Integrated Services Digital Network (ISDN): See ITU-T Recommendation I.112 [6], definition 308.network: The DSS1 protocol entity at the Network side of the user-network interface where a T referencepoint or coincident S and T reference point applies.network (S/T): The DSS1 protocol entity at the Network side of the user-network interface where acoincident S and T reference point applies.network (T): The DSS1 protocol entity at the Network side of the user-network interface where aT reference point applies (user is the private ISDN).user: The DSS1 protocol entity at the User side of the user-network interface where a T reference point orcoincident S and T reference point applies.user (S/T): The DSS1 protocol entity at the User side of the user-network interface where a coincidentS and T reference point applies.user (T): The DSS1 protocol entity at the User side of the user-network interface where a T referencepoint applies (User is the private ISDN).4AbbreviationsFor the purposes of this ETS, the following abbreviations apply, in addition to those given inETS 300 402-2 [1]:ATMAbstract Test MethodATSAbstract Test SuiteDSS1Digital Subscriber Signalling System No. oneISDNIntegrated Services Digital NetworkIUTImplementation Under TestPDUProtocol Data UnitPICSProtocol Implementation Conformance StatementPIXITProtocol Implementation eXtra Information for TestingTPTest PurposeTSSTest Suite StructureSIST ETS 300 402-6:1998



Page 9ETS 300 402-6: January 19975Test Suite Structure (TSS)·
Layer management·
User·
DL state 1·
Valid behaviour·
Syntactically invalid·
DL state 3·
Valid behaviour·
Syntactically invalid·
Timers·
Counters·
DL state 4·
Valid behaviour·
Inopportune behaviour·
Syntactically invalid·
Timers·
DL state 5.0·
Valid behaviour·
Inopportune behaviour·
Counters·
DL state 6.0·
Valid behaviour·
Inopportune behaviour·
Counters·
DL state 7.0·
Valid behaviour·
Inopportune behaviour·
DL state 8.0·
Valid behaviour·
Inopportune behaviour·
Network·
DL state 1·
Valid behaviour·
Inopportune behaviour·
Syntactically invalid·
DL state 4·
Valid behaviour·
Inopportune behaviour·
Syntactically invalid·
Timers·
DL state 5.0·
Inopportune behaviour·
Counters·
DL state 6.0·
Inopportune behaviour·
Counters·
DL state 7.0·
Inopportune behaviour·
DL state 8.0·
Inopportune behaviour·
Data control·
DL state 1·
Valid behaviour·
DL state 3·
Valid behaviour·
DL state 4·
Valid behaviour·
Inopportune behaviour·
Syntactically invalidFigure 1 (sheet 1 of 2): Test suite structureSIST ETS 300 402-6:1998



Page 10ETS 300 402-6: January 1997·
DL state 5.0·
Valid behaviour·
Inopportune behaviour·
Syntactically invalid·
Timers·
DL state 5.1·
Valid behaviour·
DL state 6.0·
Valid behaviour·
Inopportune behaviour·
Syntactically invalid·
Timers·
DL state 7.0·
Valid behaviour·
Inopportune behaviour·
Syntactically invalid·
DL state 7.0 with outstanding I frames·
Valid behaviour·
Inopportune behaviour·
Timers·
DL state 7.1·
Valid behaviour·
Inopportune behaviour·
DL state 7.4·
Valid behaviour·
Inopportune behaviour·
Syntactically invalid·
DL state 7.4 with outstanding I frames·
Valid behaviour·
Inopportune behaviour·
Timers·
DL state 7.5·
Valid behaviour·
Inopportune behaviour·
DL state 8.0·
Valid behaviour·
Inopportune behaviour·
Syntactically invalid·
DL state 8.0 with outstanding I frames·
Valid behaviour·
Inopportune behaviour·
Timers·
Counters·
DL state 8.1·
Valid behaviour·
Inopportune behaviour·
DL state 8.4·
Valid behaviour·
Inopportune behaviour·
Syntactically invalid·
DL state 8.4 with outstanding I frames·
Valid behaviour·
Inopportune behaviour·
Timers·
Counters·
DL state 8.5·
Valid behaviour·
Inopportune behaviourFigure 1 (sheet 2 of 2): Test suite structureSIST ETS 300 402-6:1998



Page 11ETS 300 402-6: January 19976Test Purposes (TP)6.1IntroductionFor each test requirement, a TP is defined.6.1.1Test purpose naming conventionTPs are numbered, starting at 001, within each group. Groups are organized according to the TSS.Additional references are added to identify the actual test suite and whether it applies to the network or theuser (see table 1).Table 1: TP identifier naming convention schemeIdentifier:___=suiteL2 = layer 2=sideU = userN = networkC = combined (user and network)=procedure categoryLLayer managementDData control=data link entity statee.g.:70, 4, 81, etc.=groupone character representing group reference according to TSS:V:Valid stimulusI:Inopportune stimulusS:Syntactically stimulusT:timersC:counters=sequential number(1-99)6.1.2Source of TP definitionThe TPs are based on ETS 300 402-2 [1].SIST ETS 300 402-6:1998



Page 12ETS 300 402-6: January 19976.1.3TP structureEach TP has been written in a manner which is consistent with all other TPs. The intention of this is tomake the TPs more readable and checkable. A particular structure has been used which is illustrated intable 2. This table should be read in conjunction with any TP, i.e. please use a TP as an example tofacilitate the full comprehension of table 2.Table 2: Structure of a single TPTP partTextExampleHeader tabsee table 1 tabsubclause 5.3.1 [opt.]table D.1/2-1 (see note 2) or new TCTC11001 (see note 3)StimulusEnsure that the IUT in the

(see note 4) see below for message structurereceiving a XXXX frameor to request a .Reactiontransmits, does, etc.if the action is sending
see below for frame structure, etc.and enters stateand/or and remains in the same state(s)or and enters state Messagestructureframe containing aUI, I, SABME, etc.a) field with and back to a)TEI, C/R, INFO, P/F, N(R), etc.NOTE 1:Text in italics will not appear in TPs and text between <> is filled in for each TP and maydiffer from one TP to the next.NOTE 2:All references to state transition tables are to annex D of ITU Recommendation Q.921 asmodified by ETS 300 402-2 [1] (e.g. "Table D.1/2-3" refers to the state transition table D.1,sheet 2, line 3).NOTE 3:These references to I-ETS 300 313 helped in developing this ETS and are of a purelyinformative nature.NOTE 4:The DL entity state by the start of the test case is the one corresponding to the test group.(e.g. in group L70, all the test cases shall be executed from the state 7.0).6.1.4Test strategyAs the base standard ETS 300 402-2 [1] contains no explicit requirements for testing, the TPs weregenerated as a result of an analysis of the base standard and the PICS specification ETS 300 402-4 [2].The criteria applied include the following:-only the requirements from the point of view of the T or coincident S and T reference point areconsidered;-whether or not a test case can be built from the TP is not considered;-as a consequence of the test method used, all information units shall be expressed in term ofProtocol Data Units (PDUs). The use of primitives is considered to be not acceptable.SIST ETS 300 402-6:1998



Page 13ETS 300 402-6: January 19976.2TPs for DSS1 layer 2All PICS items referred to in this subclause are as specified in ETS 300 402-4 [2] unless indicatedotherwise by another numbered reference.6.2.1Layer ManagementSelection:IUT supports TEI management procedures. PICS: MCu 3.6.2.1.1UserSelection:IUT supports the user role. PICS: R 2.16.2.1.1.1DL state 16.2.1.1.1.1Valid behaviourL2U_L10_V_1subclause 5.3.2, table D.1/1-1TC11004Ensure that the IUT, in the state 1, having been requested to establish the data link,transmits an UI frame with an Identity request message and enters the state 3.Selection: IUT supports the automatic TEI assignment procedures. PICS: MCu 3.1.1.L2U_L10_V_2subclause 5.3.3.2TC11001Ensure that the IUT, in the state 1, on receipt of an UI frame containing an Identity check requestmessage with Ai = 127,transmits no frame and remains in the same state.L2U_L10_V_3subclause 5.3.3.2TC11002Ensure that the IUT, in the state 1, on receipt of an UI frame containing an Identity check requestmessage with Ai = automatic TEI value,transmits no frame and remains in the same state.NOTE 1:A random function can be used to generate the Ai value between 64 and 126.L2U_L10_V_4subclause 5.3.3.2TC11003Ensure that the IUT, in the state 1, on receipt of an UI frame containing an Identity check requestmessage with Ai = non-automatic TEI value,transmits no frame and remains in the same state.NOTE 2:A random function can be used to generate the Ai value between 0 and 63.L2U_L10_V_5subclause 5.3.4TC11005Ensure that the IUT, in the state 1, on receipt of an UI frame containing an Identity remove message withAi = 127,transmits no frame and remains in the same state.L2U_L10_V_6subclause 5.3.4TC11006Ensure that the IUT, in the state 1, on receipt of an UI frame containing an Identity remove message withAi = automatic TEI value,transmits no frame and remains in the same state.NOTE 3:A random function can be used to generate the Ai value between 64 and 126.L2U_L10_V_7subclause 5.3.4TC11007Ensure that the IUT, in the state 1, on receipt of an UI frame containing an Identity remove message withAi = non-automatic TEI value,transmits no frame and remains in the same state.NOTE 4:A random function can be used to generate the Ai value between 0 and 63.L2U_L10_V_8subclause 5.3.2TC11008Ensure that the IUT, in the state 1, on receipt of an UI frame containing an Identity assigned message withAi = automatic TEI value,transmits no frame and remains in the same state.NOTE 5:A random function can be used to generate the Ai value between 64 and 126.SIST ETS 300 402-6:1998



Page 14ETS 300 402-6: January 1997L2U_L10_V_9subclause 5.3.2TC11010Ensure that the IUT, in the state 1, on receipt of an UI frame containing an Identity denied message withAi = 127,transmits no frame and remains in the same state.L2U_L10_V_10subclause 5.3.2TC11011Ensure that the IUT, in the state 1, on receipt of an UI frame containing an Identity denied message withAi = automatic TEI value,transmits no frame and remains in the same state.NOTE 6:A random function can be used to generate the Ai value between 64 and 126.6.2.1.1.1.2Inopportune behaviourL2U_L10_I_1subclause 3.3TC11013Ensure that the IUT, in the state 1, on receipt of an UI frame with a TEI value ¹ 127, containing a layer 3message requesting a response,transmits no frame and remains in the same state.NOTE 1:A random function can be used to generate the Ai value between 64 and 126.L2U_L10_I_2subclause 3.3TC11014Ensure that the IUT, in the state 1, on receipt of a SABME frame with P = 1,transmits no frame and remains in the same state.NOTE 2:A random function can be used to generate the TEI value between 0 and 126.L2U_L10_I_3subclause 3.3TC11015Ensure that the IUT, in the state 1, on receipt of a DISC frame with P = 1,transmits no frame and remains in the same state.NOTE 3:A random function can be used to generate the TEI value between 0 and 126.L2U_L10_I_4subclause 3.3TC11016Ensure that the IUT, in the state 1, on receipt of a DM frame with F = 1,transmits no frame and remains in the same state.NOTE 4:A random function can be used to generate the TEI value between 0 and 126.L2U_L10_I_5subclause 3.3TC11017Ensure that the IUT, in the state 1, on receipt of an UA frame with F = 1,transmits no frame and remains in the same state.NOTE 5:A random function can be used to generate the TEI value between 0 and 126.L2U_L10_I_6subclause 3.3TC11018Ensure that the IUT, in the state 1, on receipt of a RR command frame with P = 1,transmits no frame and remains in the same state.NOTE 6:A random function can be used to generate the TEI value between 0 and 126.L2U_L10_I_7subclause 3.3TC11022Ensure that the IUT, in the state 1, on receipt of an I frame with P = 1, containing a layer 3 message,transmits no frame and remains in the same state.NOTE 7:A random function can be used to generate the TEI value between 0 and 126.6.2.1.1.1.3Syntactically invalid behaviourL2U_L10_S_1subclause 2.9 a)new TCEnsure that the IUT, in the state 1, on receipt of an UI frame containing a layer 3 message requesting aresponse, with a TEI value = 127, and without closing flag,transmits no frame and remains in the same state.L2U_L10_S_2subclause 2.9 b)new TCEnsure that the IUT, in the state 1, on receipt of a frame containing 4 octets between flags (without controlfield octet),transmits no frame and remains in the same state.SIST ETS 300 402-6:1998



Page 15ETS 300 402-6: January 1997L2U_L10_S_3subclause 2.9 b)new TCEnsure that the IUT, in the state 1, on receipt of a RR frame containing 5 octets between flags (without thesecond control field octet),transmits no frame and remains in the same state.L2U_L10_S_4subclause 2.9 c)new TCEnsure that the IUT, in the state 1, on receipt of an UI frame containing a layer 3 message requesting aresponse, with a TEI value = 127 and which does not consist of an integral number of octets,transmits no frame and remains in the same state.L2U_L10_S_5subclause 2.9 d)TC11026Ensure that the IUT, in the state 1, on receipt of an UI frame
containing a layer 3 message requesting aresponse, with a TEI value = 127 and with a FCS error,transmits no frame and remains in the same state.L2U_L10_S_6subclause 2.9 e)new TCEnsure that the IUT, in the state 1, on receipt of an UI frame with a single octet address field, , containinga layer 3 message requesting a response,transmits no frame and remains in the same state.L2U_L10_S_7subclause 2.9 f)new TCEnsure that the IUT, in the state 1, on receipt of an UI frame containing a layer 3 message requesting aresponse, with a SAPI value not supported and a TEI value = 127,transmits no frame and remains in the same state.L2U_L10_S_8subclause 3.3.2TC11027Ensure that the IUT, in the state 1, on receipt of an UI frame containing , a layer 3 message requesting aresponse, with a TEI value = 127 and with an erroneous C/R bit value,transmits no frame and remains in the same state.L2U_L10_S_9subclause 3.3.1TC11028Ensure that the IUT, in the state 1, on receipt of an UI frame containing a layer 3 message requesting aresponse, with a TEI value = 127 and with an erroneous EA bit value in the first address field octet,transmits no frame and remains in the same state.L2U_L10_S_10subclause 3.3.1TC11029Ensure that the IUT, in the state 1, on receipt of an UI frame containing a layer 3 message requesting aresponse, with a TEI value = 127 and with an erroneous EA bit value in the second address field octet,transmits no frame and remains in the same state.L2U_L10_S_11subclauses 3.6.1, 5.8.5TC11024Ensure that the IUT, in the state 1, on receipt of an undefined frame,transmits no frame and remains in the same state.L2U_L10_S_12subclauses 5.8.5, 5.9.3new TCEnsure that the IUT, in the state 1, on receipt of an UI frame with a TEI value = 127, containing a layer 3message requesting a response with a length exceeding N201,transmits no frame and remains in the same state.6.2.1.1.2DL state 3Selection:IUT supports the automatic TEI assignment procedures. PICS: MCu 3.1.1.6.2.1.1.2.1Valid behaviourL2U_L30_V_1subclause 5.3.2, table D.1/1-8TC13007Ensure that the IUT, in the state 3, on receipt of an UI
...

Questions, Comments and Discussion

Ask us and Technical Secretary will try to provide an answer. You can facilitate discussion about the standard in here.