ETSI ETS 300 476-3 ed.1 (1996-08)
Digital Enhanced Cordless Telecommunications (DECT); Common Interface (CI); Protocol Implementation Conformance Statement (PICS) proforma; Part 3: Medium Access Control (MAC) layer - Portable radio Termination (PT)
Digital Enhanced Cordless Telecommunications (DECT); Common Interface (CI); Protocol Implementation Conformance Statement (PICS) proforma; Part 3: Medium Access Control (MAC) layer - Portable radio Termination (PT)
DE/RES-03042-3
Digitalne izboljšane brezvrvične telekomunikacije (DECT) - Skupni vmesnik (CI) - Proforma izjave o skladnosti izvedbe protokola (PICS) - 3. del: Plast krmiljenja dostopa do prenosnega medija (MAC) - prenosna radijska zaključitev (PT)
General Information
Standards Content (Sample)
2003-01.Slovenski inštitut za standardizacijo. Razmnoževanje celote ali delov tega standarda ni dovoljeno.Digital Enhanced Cordless Telecommunications (DECT); Common Interface (CI); Protocol Implementation Conformance Statement (PICS) proforma; Part 3: Medium Access Control (MAC) layer - Portable radio Termination (PT)33.070.30'(&7Digital Enhanced Cordless Telecommunications (DECT)ICS:Ta slovenski standard je istoveten z:ETS 300 476-3 E13SIST ETS 300 476-3:1999en01-MDQXDU-19993SIST ETS 300 476-3:1999SLOVENSKI
STANDARD
SIST ETS 300 476-3:1999
EUROPEANETS 300 476-3TELECOMMUNICATIONAugust 1996STANDARDSource: ETSI TC-RESReference: DE/RES-03042-3ICS:33.020, 33.060.50Key words:DECT, CI, PICSRadio Equipment and Systems (RES);Digital Enhanced Cordless Telecommunications (DECT);Common Interface (CI);Protocol Implementation Conformance Statement (PICS)proforma;Part 3: Medium Access Control (MAC) layer -Portable radio Termination (PT)ETSIEuropean Telecommunications Standards InstituteETSI SecretariatPostal address: F-06921 Sophia Antipolis CEDEX - FRANCEOffice address: 650 Route des Lucioles - Sophia Antipolis - Valbonne - FRANCEX.400: c=fr, a=atlas, p=etsi, s=secretariat - Internet: secretariat@etsi.frTel.: +33 92 94 42 00 - Fax: +33 93 65 47 16Copyright Notification: No part may be reproduced except as authorized by written permission. The copyright and theforegoing restriction extend to reproduction in all media.© European Telecommunications Standards Institute 1996. All rights reserved.SIST ETS 300 476-3:1999
Page 2ETS 300 476-3: August 1996Whilst every care has been taken in the preparation and publication of this document, errors in content,typographical or otherwise, may occur. If you have comments concerning its accuracy, please write to"ETSI Editing and Committee Support Dept." at the address shown on the title page.SIST ETS 300 476-3:1999
Page 3ETS 300 476-3: August 1996ContentsForeword.131Scope.152Normative references.153Definitions and abbreviations.163.1Definitions.163.2Abbreviations.164Conformance requirement to this PICS proforma specification.16Annex A (normative):PICS proforma for DECT MAC PT.17A.1Introduction for completing the PICS proforma.17A.1.1Purposes and structure.17A.1.2Symbols, abbreviations and conventions.17A.1.3Guidances for completing the PICS.18A.2Identification of the implementation.19A.2.1Date of statement.19A.2.2Implementation Under Test (IUT) identification.19A.2.3System Under Test (SUT) identification.19A.2.4Product supplier.19A.2.5Client identification.20A.2.6Contact person.20A.3Identification of the protocol.20A.4Global statement of conformance.20A.5Capabilities.21A.5.1Services.21A.5.1.1Connection oriented control services.21A.5.1.2Broadcast control services.22A.5.1.3Connectionless control services.22A.5.1.3.1Downlink connectionless services.22A.5.1.3.2Uplink connectionless services.23A.5.1.4Multiplexing services.23A.5.1.5Management services.24A.5.2Procedures.24A.5.2.1Connection procedures.25A.5.2.1.1Connection setup procedures.25A.5.2.1.2Connection modification procedures.26A.5.2.1.3Connection data transfer procedures.26A.5.2.1.4Handover procedures.26A.5.2.1.5Connection release procedures.27A.5.2.2Broadcast procedures.27A.5.2.3Connectionless procedures.27A.5.2.3.1Downlink connectionless procedures.27A.5.2.3.2Uplink connectionless procedures.27A.5.2.4CSF multiplexing procedures.28A.5.2.5Layer management procedures.28A.5.3Other capabilities.28A.6Protocol parameters.29SIST ETS 300 476-3:1999
Page 4ETS 300 476-3: August 1996A.6.1Timer support.29A.6.2Protocol constants.29A.6.3Channel selection parameters.29A.6.4Channels supported.30A.6.5Bearer types supported.30A.6.6Slot types supported.30A.7Messages.30A.7.1A - field header.31A.7.1.1A - field header - Tail Identification.31A.7.1.2A - field header - “Q1/BCK” bit.31A.7.1.3A - field header - B-field identification.32A.7.1.4A - field header - “Q2” bit.32A.7.2A - field identities information (NT) message.32A.7.3A - field system information (QT) messages.33A.7.4A - field paging tail (PT) messages.33A.7.4.1Paging tail messages supported.33A.7.4.2PT messages information type.33A.7.5A - field MAC control (MT) messages.34A.7.5.1Mac control messages supported.34A.7.5.2Basic connection control messages.35A.7.5.3MAC layer test messages.35A.7.5.4Advanced connection control messages.36A.7.5.5Quality control messages.37A.7.5.6Broadcast and connectionless (BCL) messages.37A.7.5.7Encryption control (EC) messages.38A.7.6B - Field Messages.39A.7.6.1B - Field Messages supported.39A.7.6.2B - Field Advanced connection control messages.39A.7.6.3B - Field - Null messages.40A.7.6.4B - Field - Quality control messages.41A.7.6.5B - Field - GF-channel data packet messages.42A.8MAC messages format and field value.43A.8.1A - field identities information (NT) message.43A.8.2A - field system information (QT) messages.44A.8.2.1QT - Static system information.44A.8.2.2QT - Extended RF carrier information.44A.8.2.3QT - Fixed part capability.45A.8.2.4QT - Extended fixed part capabilities.45A.8.2.5QT - Secondary access rights identities.45A.8.2.6QT - Multi-frame number.46A.8.2.7QT - escape.46A.8.3A - field paging tail (PT) messages.46A.8.3.1PT message - Full page.46A.8.3.2PT message - Long page.46A.8.3.3PT message - Short page.47A.8.3.4PT message - Zero length page.47A.8.3.5PT messages - MAC info. element.47A.8.3.5.1MAC info. element - Fill bits.47A.8.3.5.2MAC info. element - Blind full slot.47A.8.3.5.3MAC info. element - Other bearer.48A.8.3.5.4MAC info. element - Recommended other bearer.48A.8.3.5.5MAC info. element - Good RFP bearer.48A.8.3.5.6MAC info. element - Dummy or C/L bearer position.48A.8.3.5.7MAC info. element - RFP identity.48A.8.3.5.8MAC info. element - Escape.49A.8.3.5.9MAC info. element - Dummy or C/L bearer marker.49A.8.3.5.10MAC info. element - Bearer handover information.49A.8.3.5.11MAC info. element - RFP status.49A.8.4A - field MAC control (MT) messages.50A.8.4.1Basic connection control messages.50A.8.4.1.1Basic CC - access request.50SIST ETS 300 476-3:1999
Page 5ETS 300 476-3: August 1996A.8.4.1.2Basic CC - bearer handover request.50A.8.4.1.3Basic CC - connection handover request.50A.8.4.1.4Basic CC - unconfirmed access request.50A.8.4.1.5Basic CC - bearer confirm.51A.8.4.1.6Basic CC - wait.51A.8.4.1.7Basic CC - release.51A.8.4.2MAC layer test messages.52A.8.4.2.1MAC test - force transmit.52A.8.4.2.2MAC test - loopback data.53A.8.4.2.3MAC test - defeat antenna diversity.53A.8.4.2.4MAC test - force bearer handover.53A.8.4.2.5MAC test - escape.54A.8.4.2.6MAC test - network test.54A.8.4.2.7MAC test - clear test modes.55A.8.4.3Advanced connection control messages.55A.8.4.3.1Advanced CC - access request.55A.8.4.3.2Advanced CC - bearer handover request.56A.8.4.3.3Advanced CC - connection handover request.56A.8.4.3.4Advanced CC - unconfirmed access request.56A.8.4.3.5Advanced CC - bearer confirm.57A.8.4.3.6Advanced CC - wait.57A.8.4.3.7Advanced CC - Attributes_T request.58A.8.4.3.8Advanced CC - Attributes_T confirm.59A.8.4.3.9Advanced CC - Bandwidth_T request.59A.8.4.3.10Advanced CC - Bandwidth_T confirm.60A.8.4.3.11Advanced CC - Channel List.61A.8.4.3.12Advanced CC - Unconfirmed_dummy.61A.8.4.3.13Advanced CC - Unconfirmed_handover.62A.8.4.3.14Advanced CC - release.62A.8.4.4Quality control messages.63A.8.4.4.1QC - antenna switch single bearer request.63A.8.4.4.2QC - antenna switch all bearers request.63A.8.4.4.3QC - bearer handover request.64A.8.4.4.4QC - connection handover request.64A.8.4.4.5QC - frequency control single bearer request.65A.8.4.4.6QC - frequency control all bearers request.65A.8.4.5Broadcast and connectionless (BCL) messages.66A.8.4.5.1BCL - CLF, first of 2 transmissions, half slot.66A.8.4.5.2BCL - CLF, first of 2 transmissions, full slot.66A.8.4.5.3BCL - CLF, first of 2 transmissions, double slot.66A.8.4.5.4BCL - CLF, last transmissions, half slot.67A.8.4.5.5BCL - CLF, last transmissions, full slot.67A.8.4.5.6BCL - CLF, last transmissions, double slot.67A.8.4.5.7BCL - C/L single transmissions, no CF or CLS.67A.8.4.5.8BCL - CLS service, first transmissions.68A.8.4.5.9BCL - change dummy bearer position.68A.8.4.5.10BCL - extended system info., A-field procedure.68A.8.4.5.11BCL - extended system info., B-field procedure.69A.8.4.6Encryption control (EC) messages.69A.8.4.6.1EC - Encryption start.69A.8.4.6.2EC - Encryption stop.70A.8.4.7MT message - B - field setup.72A.8.4.8MT message - Escape.72A.8.4.9MT message - TARI.72A.8.5B - Field Messages.73A.8.5.1B - Field - Advanced CC messages.73A.8.5.1.1B-field Advanced CC - Access request.73A.8.5.1.2B-field Advanced CC - Bearer handover request.74A.8.5.1.3B-field Advanced CC - Connection handover request.75A.8.5.1.4B-field Advanced CC - Unconfirmed access request.76A.8.5.1.5B-field Advanced CC - Bearer confirm.77A.8.5.1.6B-field Advanced CC - Wait.77A.8.5.1.7B-field Advanced CC - Attributes_B request.78SIST ETS 300 476-3:1999
Page 6ETS 300 476-3: August 1996A.8.5.1.8B-field Advanced CC - Attributes_B confirm.79A.8.5.1.9B-field Advanced CC - Bandwidth_B request.80A.8.5.1.10B-field Advanced CC - Bandwidth_B confirm.81A.8.5.1.11B-field Advanced CC - Channel List.82A.8.5.1.12B-field Advanced CC - Unconfirmed_Dummy.83A.8.5.1.13B-field Advanced CC - Unconfirmed_Handover.84A.8.5.1.14B-field Advanced CC - Release.85A.8.5.2B-field - Null Messages (NM).85A.8.5.2.1B-field - NM No CF or CLF data in the B-field.85A.8.5.2.2B-field - NM One B-subfield contains CF or CLF data.86A.8.5.2.3B-field - NM Two B-subfield contain CF or CLF data.87A.8.5.2.4B-field - NM Three B-subfield contain CF or CLF data.87A.8.5.2.5B-field - NM Four B-subfield contain CF or CLF data.88A.8.5.2.6B-field - NM Five B-subfield contain CF or CLF data.89A.8.5.2.7B-field - NM Six B-subfield contain CF or CLF data.89A.8.5.2.8B-field - NM Seven B-subfield contain CF or CLF data.90A.8.5.2.9B-field - NM Eight B-subfield contain CF or CLF data.91A.8.5.2.10B-field - NM Nine B-subfield contain CF or CLF data.91A.8.5.3B - Field - Quality control (QC) messages.92A.8.5.3.1B - Field - QC Antenna switch single bearer.92A.8.5.3.2B - Field - QC Antenna switch all bearers.93A.8.5.3.3B - Field - QC Bearer handover.93A.8.5.3.4B - Field - QC Connection handover.94A.8.5.3.5B - Field - QC Frequency control single bearer.95A.8.5.3.6B - Field - QC Frequency control all bearers.95A.8.5.3.7B - Field - QC Reset request first TDMA half frame.96A.8.5.3.8B - Field - QC Reset request second TDMA half frame.97A.8.5.3.9B - Field - QC Reset request both TDMA half frames.97A.8.5.3.10B - Field - QC Reset confirm first TDMA half frame.98A.8.5.3.11B - Field - QC Reset confirm second TDMA half frame.99A.8.5.3.12B - Field - QC Reset confirm both TDMA half frames.99A.8.5.3.13B - Field - QC MOD2 ACK.100A.8.5.4B - Field - Extended system information (ES) messages.101A.8.5.4.1B - Field - ES TARI message.101A.8.5.5B - Field - GF-channel data packet messages.101A.8.5.5.1B - Field - GF-No CF data in the B-field.101A.8.5.5.2B - Field - GF-One B-subfield contains CF data.102A.8.5.5.3B - Field - GF-Two B-subfield contain CF data.102A.8.5.5.4B - Field - GF-Three B-subfield contain CF data.103A.8.5.5.5B - Field - GF-Four B-subfield contain CF data.103A.8.5.5.6B - Field - GF-Five B-subfield contain CF data.104A.8.5.5.7B - Field - GF-Six B-subfield contain CF data.104A.8.5.5.8B - Field - GF-Seven B-subfield contain CF data.105A.8.5.5.9B - Field - GF-Eight B-subfield contain CF data.105A.8.5.5.10B - Field - GF-Nine B-subfield contain CF data.106A.8.5.6B - Field - Escape message.106History.107SIST ETS 300 476-3:1999
Page 7ETS 300 476-3: August 1996QuestionsTable A.1: Date of Statement.19Table A.2: IUT identification.19Table A.3: SUT identification.19Table A.4: Product supplier.19Table A.5: Client identification.20Table A.6: Contact person identification.20Table A.7: Identification of protocol.20Table A.8: Global statement of conformance.20Table A.9: Service groups supported.21Table A.10: Connection oriented control services.21Table A.11: Connection services.21Table A.12: Symmetric connection oriented services.21Table A.13: Asymmetric connection oriented services.22Table A.14: C-plane connection services.22Table A.15: Broadcast services.22Table A.16: Connectionless control services.22Table A.17: Downlink connectionless services.22Table A.18: Uplink connectionless services.23Table A.19: CSF multiplexing services.23Table A.20: D-MAP services.23Table A.21: B-MAP services.23Table A.22: E/U mux services.24Table A.23: C mux mapping services.24Table A.24: Management services.24Table A.25: Handover services management.24Table A.26: C/O single bearer setup procedures.25Table A.27: C/O multi-bearer symmetric setup procedures.25Table A.28: C/O multi-bearer asymmetric setup procedures.25Table A.29: C/O bearer setup procedures.26Table A.30: C/O connection modification procedures.26Table A.31: C/O data transfer procedures.26Table A.32: Handover procedures.26Table A.33: C/O connection release procedures.27Table A.34: Broadcast procedures.27Table A.35: Downlink connectionless procedures.27Table A.36: Uplink connectionless procedures.27Table A.37: CSF multiplexing procedures.28Table A.38: Layer management procedures.28Table A.39: Extended RF carriers supported.28Table A.40: Operation modes in Idle_locked state supported.28Table A.41: Timer supported.29Table A.42: Protocol constants support.29Table A.43: Channel selection parameters.30Table A.44: Channels supported.30Table A.45: Bearer types supported.30Table A.46: Slot types supported.30Table A.47: Tail Identification (Sending P to F).31Table A.48: Tail Identification (Receipt F to P).31Table A.49: Q1/BCK bit (Sending P to F).31Table A.50: Q1/BCK bit (Receipt F to P).31Table A.51: B-field identification (Sending P to F).32Table A.52: B-field identification (Receipt F to P).32Table A.53: Q2
...
SLOVENSKI STANDARD
SIST ETS 300 476-3:1999
01-maj-1999
'LJLWDOQHL]EROMãDQHEUH]YUYLþQHWHOHNRPXQLNDFLMH '(&7 6NXSQLYPHVQLN &,
3URIRUPDL]MDYHRVNODGQRVWLL]YHGEHSURWRNROD 3,&6 GHO 3ODVWNUPLOMHQMD
GRVWRSDGRSUHQRVQHJDPHGLMD 0$& SUHQRVQDUDGLMVND]DNOMXþLWHY 37
Digital Enhanced Cordless Telecommunications (DECT); Common Interface (CI);
Protocol Implementation Conformance Statement (PICS) proforma; Part 3: Medium
Access Control (MAC) layer - Portable radio Termination (PT)
Ta slovenski standard je istoveten z: ETS 300 476-3 Edition 1
ICS:
33.070.30 'LJLWDOQHL]EROMãDQH Digital Enhanced Cordless
EUH]YUYLþQHWHOHNRPXQLNDFLMH Telecommunications (DECT)
'(&7
SIST ETS 300 476-3:1999 en
2003-01.Slovenski inštitut za standardizacijo. Razmnoževanje celote ali delov tega standarda ni dovoljeno.
---------------------- Page: 1 ----------------------
SIST ETS 300 476-3:1999
---------------------- Page: 2 ----------------------
SIST ETS 300 476-3:1999
EUROPEAN ETS 300 476-3
TELECOMMUNICATION August 1996
STANDARD
Source: ETSI TC-RES Reference: DE/RES-03042-3
ICS: 33.020, 33.060.50
Key words: DECT, CI, PICS
Radio Equipment and Systems (RES);
Digital Enhanced Cordless Telecommunications (DECT);
Common Interface (CI);
Protocol Implementation Conformance Statement (PICS)
proforma;
Part 3: Medium Access Control (MAC) layer -
Portable radio Termination (PT)
ETSI
European Telecommunications Standards Institute
ETSI Secretariat
Postal address: F-06921 Sophia Antipolis CEDEX - FRANCE
Office address: 650 Route des Lucioles - Sophia Antipolis - Valbonne - FRANCE
X.400: c=fr, a=atlas, p=etsi, s=secretariat - Internet: secretariat@etsi.fr
Tel.: +33 92 94 42 00 - Fax: +33 93 65 47 16
Copyright Notification: No part may be reproduced except as authorized by written permission. The copyright and the
foregoing restriction extend to reproduction in all media.
© European Telecommunications Standards Institute 1996. All rights reserved.
---------------------- Page: 3 ----------------------
SIST ETS 300 476-3:1999
Page 2
ETS 300 476-3: August 1996
Whilst every care has been taken in the preparation and publication of this document, errors in content,
typographical or otherwise, may occur. If you have comments concerning its accuracy, please write to
"ETSI Editing and Committee Support Dept." at the address shown on the title page.
---------------------- Page: 4 ----------------------
SIST ETS 300 476-3:1999
Page 3
ETS 300 476-3: August 1996
Contents
Foreword .13
1 Scope .15
2 Normative references.15
3 Definitions and abbreviations .16
3.1 Definitions .16
3.2 Abbreviations .16
4 Conformance requirement to this PICS proforma specification.16
Annex A (normative): PICS proforma for DECT MAC PT.17
A.1 Introduction for completing the PICS proforma.17
A.1.1 Purposes and structure.17
A.1.2 Symbols, abbreviations and conventions.17
A.1.3 Guidances for completing the PICS.18
A.2 Identification of the implementation.19
A.2.1 Date of statement .19
A.2.2 Implementation Under Test (IUT) identification .19
A.2.3 System Under Test (SUT) identification .19
A.2.4 Product supplier.19
A.2.5 Client identification.20
A.2.6 Contact person.20
A.3 Identification of the protocol .20
A.4 Global statement of conformance .20
A.5 Capabilities.21
A.5.1 Services .21
A.5.1.1 Connection oriented control services .21
A.5.1.2 Broadcast control services .22
A.5.1.3 Connectionless control services.22
A.5.1.3.1 Downlink connectionless services .22
A.5.1.3.2 Uplink connectionless services.23
A.5.1.4 Multiplexing services .23
A.5.1.5 Management services .24
A.5.2 Procedures.24
A.5.2.1 Connection procedures .25
A.5.2.1.1 Connection setup procedures.25
A.5.2.1.2 Connection modification procedures .26
A.5.2.1.3 Connection data transfer procedures .26
A.5.2.1.4 Handover procedures .26
A.5.2.1.5 Connection release procedures.27
A.5.2.2 Broadcast procedures .27
A.5.2.3 Connectionless procedures.27
A.5.2.3.1 Downlink connectionless procedures .27
A.5.2.3.2 Uplink connectionless procedures.27
A.5.2.4 CSF multiplexing procedures .28
A.5.2.5 Layer management procedures .28
A.5.3 Other capabilities .28
A.6 Protocol parameters.29
---------------------- Page: 5 ----------------------
SIST ETS 300 476-3:1999
Page 4
ETS 300 476-3: August 1996
A.6.1 Timer support. 29
A.6.2 Protocol constants. 29
A.6.3 Channel selection parameters . 29
A.6.4 Channels supported . 30
A.6.5 Bearer types supported.30
A.6.6 Slot types supported. 30
A.7 Messages . 30
A.7.1 A - field header. 31
A.7.1.1 A - field header - Tail Identification . 31
A.7.1.2 A - field header - “Q1/BCK” bit. 31
A.7.1.3 A - field header - B-field identification. 32
A.7.1.4 A - field header - “Q2” bit . 32
A.7.2 A - field identities information (N ) message . 32
T
A.7.3 A - field system information (Q ) messages. 33
T
A.7.4 A - field paging tail (P ) messages . 33
T
A.7.4.1 Paging tail messages supported. 33
A.7.4.2 P messages information type . 33
T
A.7.5 A - field MAC control (M ) messages . 34
T
A.7.5.1 Mac control messages supported. 34
A.7.5.2 Basic connection control messages . 35
A.7.5.3 MAC layer test messages. 35
A.7.5.4 Advanced connection control messages . 36
A.7.5.5 Quality control messages . 37
A.7.5.6 Broadcast and connectionless (BCL) messages. 37
A.7.5.7 Encryption control (EC) messages . 38
A.7.6 B - Field Messages. 39
A.7.6.1 B - Field Messages supported. 39
A.7.6.2 B - Field Advanced connection control messages. 39
A.7.6.3 B - Field - Null messages. 40
A.7.6.4 B - Field - Quality control messages. 41
A.7.6.5 B - Field - GF-channel data packet messages . 42
A.8 MAC messages format and field value. 43
A.8.1 A - field identities information (N ) message . 43
T
A.8.2 A - field system information (Q ) messages. 44
T
A.8.2.1 QT - Static system information . 44
A.8.2.2 QT - Extended RF carrier information . 44
A.8.2.3 QT - Fixed part capability. 45
A.8.2.4 QT - Extended fixed part capabilities. 45
A.8.2.5 QT - Secondary access rights identities . 45
A.8.2.6 QT - Multi-frame number . 46
A.8.2.7 QT - escape. 46
A.8.3 A - field paging tail (P ) messages . 46
T
A.8.3.1 P message - Full page . 46
T
A.8.3.2 P message - Long page . 46
T
A.8.3.3 P message - Short page. 47
T
A.8.3.4 P message - Zero length page . 47
T
A.8.3.5 P messages - MAC info. element. 47
T
A.8.3.5.1 MAC info. element - Fill bits . 47
A.8.3.5.2 MAC info. element - Blind full slot . 47
A.8.3.5.3 MAC info. element - Other bearer. 48
A.8.3.5.4 MAC info. element - Recommended other bearer. 48
A.8.3.5.5 MAC info. element - Good RFP bearer. 48
A.8.3.5.6 MAC info. element - Dummy or C/L bearer position . 48
A.8.3.5.7 MAC info. element - RFP identity. 48
A.8.3.5.8 MAC info. element - Escape . 49
A.8.3.5.9 MAC info. element - Dummy or C/L bearer marker . 49
A.8.3.5.10 MAC info. element - Bearer handover information. 49
A.8.3.5.11 MAC info. element - RFP status . 49
A.8.4 A - field MAC control (M ) messages . 50
T
A.8.4.1 Basic connection control messages . 50
A.8.4.1.1 Basic CC - access request. 50
---------------------- Page: 6 ----------------------
SIST ETS 300 476-3:1999
Page 5
ETS 300 476-3: August 1996
A.8.4.1.2 Basic CC - bearer handover request .50
A.8.4.1.3 Basic CC - connection handover request .50
A.8.4.1.4 Basic CC - unconfirmed access request .50
A.8.4.1.5 Basic CC - bearer confirm .51
A.8.4.1.6 Basic CC - wait .51
A.8.4.1.7 Basic CC - release.51
A.8.4.2 MAC layer test messages .52
A.8.4.2.1 MAC test - force transmit.52
A.8.4.2.2 MAC test - loopback data .53
A.8.4.2.3 MAC test - defeat antenna diversity.53
A.8.4.2.4 MAC test - force bearer handover .53
A.8.4.2.5 MAC test - escape .54
A.8.4.2.6 MAC test - network test .54
A.8.4.2.7 MAC test - clear test modes .55
A.8.4.3 Advanced connection control messages.55
A.8.4.3.1 Advanced CC - access request.55
A.8.4.3.2 Advanced CC - bearer handover request.56
A.8.4.3.3 Advanced CC - connection handover request.56
A.8.4.3.4 Advanced CC - unconfirmed access request .56
A.8.4.3.5 Advanced CC - bearer confirm.57
A.8.4.3.6 Advanced CC - wait.57
A.8.4.3.7 Advanced CC - Attributes_T request.58
A.8.4.3.8 Advanced CC - Attributes_T confirm.59
A.8.4.3.9 Advanced CC - Bandwidth_T request .59
A.8.4.3.10 Advanced CC - Bandwidth_T confirm .60
A.8.4.3.11 Advanced CC - Channel List .61
A.8.4.3.12 Advanced CC - Unconfirmed_dummy.61
A.8.4.3.13 Advanced CC - Unconfirmed_handover.62
A.8.4.3.14 Advanced CC - release.62
A.8.4.4 Quality control messages.63
A.8.4.4.1 QC - antenna switch single bearer request .63
A.8.4.4.2 QC - antenna switch all bearers request .63
A.8.4.4.3 QC - bearer handover request.64
A.8.4.4.4 QC - connection handover request.64
A.8.4.4.5 QC - frequency control single bearer request.65
A.8.4.4.6 QC - frequency control all bearers request.65
A.8.4.5 Broadcast and connectionless (BCL) messages .66
A.8.4.5.1 BCL - CLF, first of 2 transmissions, half slot .66
A.8.4.5.2 BCL - CLF, first of 2 transmissions, full slot .66
A.8.4.5.3 BCL - CLF, first of 2 transmissions, double slot .66
A.8.4.5.4 BCL - CLF, last transmissions, half slot.67
A.8.4.5.5 BCL - CLF, last transmissions, full slot.67
A.8.4.5.6 BCL - CLF, last transmissions, double slot.67
A.8.4.5.7 BCL - C/L single transmissions, no CF or CLS .67
A.8.4.5.8 BCL - CLS service, first transmissions .68
A.8.4.5.9 BCL - change dummy bearer position .68
A.8.4.5.10 BCL - extended system info., A-field procedure.68
A.8.4.5.11 BCL - extended system info., B-field procedure.69
A.8.4.6 Encryption control (EC) messages.69
A.8.4.6.1 EC - Encryption start.69
A.8.4.6.2 EC - Encryption stop.70
A.8.4.7 M message - B - field setup .72
T
A.8.4.8 M message - Escape .72
T
A.8.4.9 M message - TARI.72
T
A.8.5 B - Field Messages .73
A.8.5.1 B - Field - Advanced CC messages .73
A.8.5.1.1 B-field Advanced CC - Access request .73
A.8.5.1.2 B-field Advanced CC - Bearer handover request .74
A.8.5.1.3 B-field Advanced CC - Connection handover request.75
A.8.5.1.4 B-field Advanced CC - Unconfirmed access request .76
A.8.5.1.5 B-field Advanced CC - Bearer confirm .77
A.8.5.1.6 B-field Advanced CC - Wait.77
A.8.5.1.7 B-field Advanced CC - Attributes_B request .78
---------------------- Page: 7 ----------------------
SIST ETS 300 476-3:1999
Page 6
ETS 300 476-3: August 1996
A.8.5.1.8 B-field Advanced CC - Attributes_B confirm. 79
A.8.5.1.9 B-field Advanced CC - Bandwidth_B request . 80
A.8.5.1.10 B-field Advanced CC - Bandwidth_B confirm . 81
A.8.5.1.11 B-field Advanced CC - Channel List. 82
A.8.5.1.12 B-field Advanced CC - Unconfirmed_Dummy . 83
A.8.5.1.13 B-field Advanced CC - Unconfirmed_Handover . 84
A.8.5.1.14 B-field Advanced CC - Release . 85
A.8.5.2 B-field - Null Messages (NM). 85
A.8.5.2.1 B-field - NM No C or CL data in the B-field. 85
F F
A.8.5.2.2 B-field - NM One B-subfield contains C or CL data. 86
F F
A.8.5.2.3 B-field - NM Two B-subfield contain C or CL data. 87
F F
A.8.5.2.4 B-field - NM Three B-subfield contain C or CL data . 87
F F
A.8.5.2.5 B-field - NM Four B-subfield contain C or CL data . 88
F F
A.8.5.2.6 B-field - NM Five B-subfield contain C or CL data. 89
F F
A.8.5.2.7 B-field - NM Six B-subfield contain C or CL data. 89
F F
A.8.5.2.8 B-field - NM Seven B-subfield contain C or CL data . 90
F F
A.8.5.2.9 B-field - NM Eight B-subfield contain C or CL data . 91
F F
A.8.5.2.10 B-field - NM Nine B-subfield contain C or CL data . 91
F F
A.8.5.3 B - Field - Quality control (QC) messages. 92
A.8.5.3.1 B - Field - QC Antenna switch single bearer. 92
A.8.5.3.2 B - Field - QC Antenna switch all bearers. 93
A.8.5.3.3 B - Field - QC Bearer handover . 93
A.8.5.3.4 B - Field - QC Connection handover. 94
A.8.5.3.5 B - Field - QC Frequency control single bearer. 95
A.8.5.3.6 B - Field - QC Frequency control all bearers. 95
A.8.5.3.7 B - Field - QC Reset request first TDMA half frame . 96
A.8.5.3.8 B - Field - QC Reset request second TDMA half frame. 97
A.8.5.3.9 B - Field - QC Reset request both TDMA half frames . 97
A.8.5.3.10 B - Field - QC Reset confirm first TDMA half frame . 98
A.8.5.3.11 B - Field - QC Reset confirm second TDMA half frame. 99
A.8.5.3.12 B - Field - QC Reset confirm both TDMA half frames . 99
A.8.5.3.13 B - Field - QC MOD2 ACK . 100
A.8.5.4 B - Field - Extended system information (ES) messages. 101
A.8.5.4.1 B - Field - ES TARI message. 101
A.8.5.5 B - Field - GF-channel data packet messages . 101
A.8.5.5.1 B - Field - GF-No C data in the B-field. 101
F
A.8.5.5.2 B - Field - GF-One B-subfield contains C data . 102
F
A.8.5.5.3 B - Field - GF-Two B-subfield contain C data. 102
F
A.8.5.5.4 B - Field - GF-Three B-subfield contain C data . 103
F
A.8.5.5.5 B - Field - GF-Four B-subfield contain C data . 103
F
A.8.5.5.6 B - Field - GF-Five B-subfield contain C data . 104
F
A.8.5.5.7 B - Field - GF-Six B-subfield contain C data. 104
F
A.8.5.5.8 B - Field - GF-Seven B-subfield contain C data. 105
F
A.8.5.5.9 B - Field - GF-Eight B-subfield contain C data. 105
F
A.8.5.5.10 B - Field - GF-Nine B-subfield contain C data . 106
F
A.8.5.6 B - Field - Escape message . 106
History. 107
---------------------- Page: 8 ----------------------
SIST ETS 300 476-3:1999
Page 7
ETS 300 476-3: August 1996
Questions
Table A.1: Date of Statement.19
Table A.2: IUT identification .19
Table A.3: SUT identification.19
Table A.4: Product supplier.19
Table A.5: Client identification.20
Table A.6: Contact person identification.20
Table A.7: Identification of protocol.20
Table A.8: Global statement of conformance.20
Table A.9: Service groups supported.21
Table A.10: Connection oriented control services.21
Table A.11: Connection services.21
Table A.12: Symmetric connection oriented services .21
Table A.13: Asymmetric connection oriented services .22
Table A.14: C-plane connection services.22
Table A.15: Broadcast services .22
Table A.16: Connectionless control services .22
Table A.17: Downlink connectionless services .22
Table A.18: Uplink connectionless services.23
Table A.19: CSF multiplexing services .23
Table A.20: D-MAP services .23
Table A.21: B-MAP services .23
Table A.22: E/U mux services.24
Table A.23: C mux mapping services .24
Table A.24: Management services.24
Table A.25: Handover services management.24
Table A.26: C/O single bearer setup procedures.25
Table A.27: C/O multi-bearer symmetric setup procedures.25
Table A.28: C/O multi-bearer asymmetric setup procedures.25
Table A.29: C/O bearer setup procedures .26
Table A.30: C/O connection modification procedures.26
Table A.31: C/O data transfer procedures .26
Table A.32: Handover procedures .26
Table A.33: C/O connection release procedures .27
Table A.34: Broadcast procedures.27
Table A.35: Downlink connectionless procedures .27
Table A.36: Uplink connectionless procedures.27
Table A.37: CSF multiplexing procedures.28
Table A.38: Layer management procedures.28
Table A.39: Extended RF carriers supported.28
Table A.40: Operation modes in Idle_locked state supported .28
Table A.41: Time
...
Questions, Comments and Discussion
Ask us and Technical Secretary will try to provide an answer. You can facilitate discussion about the standard in here.