ETSI EN 300 911 V8.3.2 (2000-10)

Digital cellular telecommunications system (Phase 2+) (GSM); Radio subsystem link control (GSM 05.08 version 8.3.2 Release 1999)

REN/SMG-020508Q8

Digitalni celični telekomunikacijski sistem (faza 2+) – Krmiljenje povezave radijskega podsistema (GSM 05.08, različica 8.3.2, izdaja 1999)

General Information

• Status: Published
• Publication Date: 04-Oct-2000
• Technical Committee: SMG 2 - Radio
• Current Stage: 12 - Completion
• Due Date: 08-Sep-2000
• Completion Date: 05-Oct-2000
• Ref Project: SIST EN 300 911 V8.3.2:2003 - Digital cellular telecommunications system (Phase 2+) (GSM); Radio subsystem link control (GSM 05.08 version 8.3.2 Release 1999)

Standards Content (Sample)

SLOVENSKI STANDARD
SIST EN 300 911 V8.3.2:2003
01-december-2003
'LJLWDOQLFHOLþQLWHOHNRPXQLNDFLMVNLVLVWHPID]D±.UPLOMHQMHSRYH]DYH
UDGLMVNHJDSRGVLVWHPD*60UD]OLþLFDL]GDMD
Digital cellular telecommunications system (Phase 2+) (GSM); Radio subsystem link
control (GSM 05.08 version 8.3.2 Release 1999)
Ta slovenski standard je istoveten z: EN 300 911 Version 8.3.2
ICS:
33.070.50 Globalni sistem za mobilno Global System for Mobile
telekomunikacijo (GSM) Communication (GSM)
SIST EN 300 911 V8.3.2:2003 en
2003-01.Slovenski inštitut za standardizacijo. Razmnoževanje celote ali delov tega standarda ni dovoljeno.

---------------------- Page: 1 ----------------------

SIST EN 300 911 V8.3.2:2003

---------------------- Page: 2 ----------------------

SIST EN 300 911 V8.3.2:2003
ETSI EN 300 911 V8.3.2 (2000-10)
European Standard (Telecommunications series)
Digital cellular telecommunications system (Phase 2+);
Radio subsystem link control
(GSM 05.08 version 8.3.2 Release 1999)
R
GLOBAL SYSTEM FOR
MOBILE COMMUNICATIONS

---------------------- Page: 3 ----------------------

SIST EN 300 911 V8.3.2:2003
2 ETSI EN 300 911 V8.3.2 (2000-10)
(GSM 05.08 version 8.3.2 Release 1999)
Reference
REN/SMG-020508Q8
Keywords
Digital cellular telecommunications system,
Global System for Mobile communications (GSM)
ETSI
650 Route des Lucioles
F-06921 Sophia Antipolis Cedex - FRANCE
Tel.:[phone] Fax:[phone]
Siret N° 348 623 562 00017 - NAF 742 C
Association à but non lucratif enregistrée à la
Sous-Préfecture de Grasse (06) N° 7803/88
Important notice
Individual copies of the present document can be downloaded from:
http://www.etsi.org
The present document may be made available in more than one electronic version or in print. In any case of existing or
perceived difference in contents between such versions, the reference version is the Portable Document Format (PDF).
In case of dispute, the reference shall be the printing on ETSI printers of the PDF version kept on a specific network drive
within ETSI Secretariat.
Users of the present document should be aware that the document may be subject to revision or change of status.
Information on the current status of this and other ETSI documents is available at http://www.etsi.org/tb/status/
If you find errors in the present document, send your comment to:
[e-mail]
Copyright Notification
No part may be reproduced except as authorized by written permission.
The copyright and the foregoing restriction extend to reproduction in all media.
© European Telecommunications Standards Institute 2000.
All rights reserved.
ETSI

---------------------- Page: 4 ----------------------

SIST EN 300 911 V8.3.2:2003
3 ETSI EN 300 911 V8.3.2 (2000-10)
(GSM 05.08 version 8.3.2 Release 1999)
Contents
Intellectual Property Rights.7
Foreword.7
1 Scope .8
1.1 References .8
1.2 Abbreviations .9
2 General .9
3 Handover .10
3.1 Overall process.10
3.2 MS measurement procedure.10
3.3 BSS measurement procedure.10
3.4 Strategy .10
4 RF power control.11
4.1 Overall process.11
4.2 MS implementation .11
4.3 MS power control range .12
4.4 BSS implementation.12
4.5 BSS power control range.12
4.6 Strategy .12
4.7 Timing .13
4.8 Dedicated channels used for a voice group call or voice broadcast.13
5 Radio link failure.14
5.1 Criterion .14
5.2 MS procedure .14
5.3 BSS procedure.14
6 Idle mode tasks.15
6.1 Introduction .15
6.2 Measurements for normal cell selection.15
6.3 Measurements for stored list cell selection.16
6.4 Criteria for cell selection and reselection .16
6.5 Downlink signalling failure.17
6.6 Measurements for Cell Reselection.18
6.6.1 Monitoring of received signal level and BCCH data .18
6.6.2 Path loss criteria and timings for cell re-selection .19
6.6.3 Cell reselection algorithm for SoLSA.20
6.7 Release of TCH and SDCCH .20
6.7.1 Normal case .20
6.7.2 Call re-establishment .21
6.8 Abnormal cases and emergency calls.21
7 Network pre-requisites .22
7.1 BCCH carriers .22
7.2 Identification of surrounding BSS for handover measurements.22
8 Radio link measurements .23
8.1 Signal level.24
8.1.1 General.24
8.1.2 Physical parameter.24
8.1.3 Statistical parameters .25
8.1.4 Range of parameter.25
8.2 Signal quality.25
8.2.1 General.25
8.2.2 Physical parameter.25
8.2.3 Statistical parameters .26
ETSI

---------------------- Page: 5 ----------------------

SIST EN 300 911 V8.3.2:2003
4 ETSI EN 300 911 V8.3.2 (2000-10)
(GSM 05.08 version 8.3.2 Release 1999)
8.2.4 Range of parameter.26
8.2.4.1 Range of parameters for EGPRS.27
8.3 Aspects of discontinuous transmission (DTX).31
8.4 Measurement reporting.32
8.4.1 Measurement reporting for the MS on a TCH .32
8.4.1.1 Measurement reporting for the MS on an E-TCH in FPC mode.33
8.4.2 Measurement reporting for the MS on a SDCCH.33
8.4.3 Additional cell reporting requirements for multi band MS.33
8.4.4 Common aspects for the MS on a TCH or a SDCCH.34
8.4.5 Measurement reporting for the BSS .34
8.4.6 Extended measurement reporting .35
8.4.7 Enhanced Measurement Reporting .35
8.4.7.1 Reporting Priority .35
8.4.7.2 Measurement Reporting.36
8.5 Absolute MS-BTS distance .37
8.5.1 General.37
8.5.2 Physical parameter.37
9 Control parameters .38
10 GPRS mode tasks.40
10.1 Cell Re-selection .40
10.1.1 Monitoring the received signal level and PBCCH data .41
10.1.1.1 Packet idle mode .41
10.1.1.2 Packet transfer mode.42
10.1.2 Cell Re-selection Criteria.43
10.1.3 Cell Re-selection Algorithm .44
10.1.3.1 Abnormal cell reselection .44
10.1.4 Network controlled Cell re-selection .45
10.1.4.1 Measurement reporting .45
10.1.4.2 Cell re-selection command.46
10.1.4.3 Exceptional cases .46
10.1.5 Extended Measurement reporting .47
10.2 RF Power Control.48
10.2.1 MS output power .48
10.2.2 BTS output power.49
10.2.3 Measurements at MS side .50
10.2.3.1 Deriving the C value .50
10.2.3.1.1 Packet idle mode.50
10.2.3.1.2 Packet transfer mode .51
10.2.3.2 Derivation of Channel Quality Report .52
10.2.3.2.1 Packet transfer mode .52
10.2.3.2.2 Packet idle mode.54
10.2.3.2.3 Measurement reporting.55
10.2.4 Measurements at BSS side.55
10.3 Measurement requirements .56
10.4 Control parameters .57
11 CTS mode tasks.59
11.1 CTS idle mode tasks.59
11.1.1 CTS cell selection .59
11.1.1.1 Synchronization and measurements for CTS cell selection .59
11.1.1.2 Initial sychronization of CTS-MS .59
11.1.2 Criterion for CTS cell selection .60
11.1.3 Monitoring of CTSBCH and CTSPCH.60
11.1.3.1 Monitoring of received signal level .60
11.1.3.2 Downlink beacon failure .60
11.1.3.3 Downlink paging failure .60
11.1.4 Procedures with reporting to the CTS-FP .61
11.1.4.1 AFA monitoring.61
11.1.4.2 BCCH detection .61
11.1.4.3 Observed Frequency Offset (OFO) measurement.61
11.2 Intra-cell handover .62
ETSI

---------------------- Page: 6 ----------------------

SIST EN 300 911 V8.3.2:2003
5 ETSI EN 300 911 V8.3.2 (2000-10)
(GSM 05.08 version 8.3.2 Release 1999)
11.2.1 Overall process .62
11.2.2 CTS-MS measurement procedure.62
11.2.3 CTS-FP measurement procedure .62
11.2.4 Strategy.62
11.3 RF power control.62
11.3.1 Overall process .62
11.3.2 CTS-MS implementation.62
11.3.3 CTS-MS power control range.63
11.3.4 CTS-FP implementation .63
11.3.5 CTS-FP power control range .63
11.3.6 Strategy.63
11.3.7 Timing .63
11.4 Radio link failure.64
11.4.1 Criterion.64
11.4.2 CTS-MS procedure.64
11.4.3 CTS-FP procedure .64
11.5 Radio link measurements .64
11.5.1 Signal strength .64
11.5.1.1 General.64
11.5.1.2 Physical parameter .65
11.5.1.3 Statistical parameters .65
11.5.1.4 Range of parameter .65
11.5.2 Signal quality.65
11.5.2.1 General.65
11.5.2.2 Physical parameter .65
11.5.2.3 Statistical parameters .65
11.5.2.4 Range of parameter .65
11.5.3 Aspects of discontinuous transmission (DTX) .65
11.5.4 Measurement reporting for the CTS-MS on a TCH.65
11.6 Control of CTS-FP service range .66
11.7 Control parameters .66
12 COMPACT Mode Tasks.68
12.1 Introduction .68
12.2 Network Pre-requisites .68
12.2.1 CPBCCH carriers.68
12.3 COMPACT Idle Mode Tasks.68
12.3.1 Introduction.68
12.3.2 Measurements for COMPACT Cell Selection.68
12.3.3 Measurements for COMPACT Stored List Cell Selection .69
12.3.4 Criteria for COMPACT Cell Selection.69
12.3.5 Downlink Signalling Failure.69
12.4 COMPACT Cell Reselection .69
12.4.1 Monitoring the received signal level and CPBCCH data.70
12.4.1.1 Packet idle mode .70
12.4.1.2 Packet transfer mode.70
12.4.2 COMPACT cell reselection criteria.71
12.4.3 COMPACT cell reselection algorithm.71
12.4.4 Network controlled Cell reselection .71
12.4.5 COMPACT cell reselection measurement opportunities .71
Annex A (informative): Definition of a basic GSM or DCS 1 800 handover and RF power
control algorithm .72
A.1 Scope .72
A.2 Functional requirement.72
A.3 BSS pre-processing and threshold comparisons.73
A.3.1 Measurement averaging process.73
A.3.2 Threshold comparison process .74
A.3.2.1 RF power control process .74
A.3.2.2 Handover Process .75
ETSI

---------------------- Page: 7 ----------------------

SIST EN 300 911 V8.3.2:2003
6 ETSI EN 300 911 V8.3.2 (2000-10)
(GSM 05.08 version 8.3.2 Release 1999)
A.4 BSS decision algorithm.76
A.4.1 Internal intracell handover according to radio criteria: (Interference problems).77
A.4.2 Internal handover according t
...