ETSI EN 300 119-4 V2.1.1 (2004-09)

Environmental Engineering (EE); European telecommunication standard for equipment practice; Part 4: Engineering requirements for subracks in miscellaneous racks and cabinets

REN/EE-TMG006

Okoljski inženiring (EE) – Evropski telekomunikacijski standard za prakso pri opremi – 4. del: Tehnične zahteve za podokvire v mešani sestavi okvirov in ohišij

General Information

• Status: Published
• Publication Date: 29-Sep-2004
• Technical Committee: EE TMG - EE Thermal Management Group
• Current Stage: 12 - Completion
• Due Date: 07-Oct-2004
• Completion Date: 30-Sep-2004
• Ref Project: SIST EN 300 119-4 V2.1.1:2006 - Environmental Engineering (EE); European telecommunication standard for equipment practice; Part 4: Engineering requirements for subracks in miscellaneous racks and cabinets

Standards Content (Sample)

SLOVENSKI STANDARD
SIST EN 300 119-4 V2.1.1:2006
01-februar-2006
2NROMVNLLQåHQLULQJ((±(YURSVNLWHOHNRPXQLNDFLMVNLVWDQGDUG]DSUDNVRSUL
RSUHPL±GHO7HKQLþQH]DKWHYH]DSRGRNYLUHYPHãDQLVHVWDYLRNYLURYLQRKLãLM
Environmental Engineering (EE); European telecommunication standard for equipment
practice; Part 4: Engineering requirements for subracks in miscellaneous racks and
cabinets
Ta slovenski standard je istoveten z: EN 300 119-4 Version 2.1.1
ICS:
19.040 Preskušanje v zvezi z Environmental testing
okoljem
33.050.01 Telekomunikacijska Telecommunication terminal
terminalska oprema na equipment in general
splošno
SIST EN 300 119-4 V2.1.1:2006 en
2003-01.Slovenski inštitut za standardizacijo. Razmnoževanje celote ali delov tega standarda ni dovoljeno.

---------------------- Page: 1 ----------------------

SIST EN 300 119-4 V2.1.1:2006

---------------------- Page: 2 ----------------------

SIST EN 300 119-4 V2.1.1:2006

ETSI EN 300 119-4 V2.1.1 (2004-09)
European Standard (Telecommunications series)


Environmental Engineering (EE);
European telecommunication standard
for equipment practice;
Part 4: Engineering requirements for
subracks in miscellaneous racks and cabinets

---------------------- Page: 3 ----------------------

SIST EN 300 119-4 V2.1.1:2006
 2 ETSI EN 300 119-4 V2.1.1 (2004-09)



Reference
REN/EE-TMG006
Keywords
equipment practice, environment, rack
ETSI
650 Route des Lucioles
F-06921 Sophia Antipolis Cedex - FRANCE

Tel.: [phone]  Fax: [phone]

Siret N° 348 623 562 00017 - NAF 742 C
Association à but non lucratif enregistrée à la
Sous-Préfecture de Grasse (06) N° 7803/88

Important notice
Individual copies of the present document can be downloaded from:
http://www.etsi.org
The present document may be made available in more than one electronic version or in print. In any case of existing or
perceived difference in contents between such versions, the reference version is the Portable Document Format (PDF).
In case of dispute, the reference shall be the printing on ETSI printers of the PDF version kept on a specific network drive
within ETSI Secretariat.
Users of the present document should be aware that the document may be subject to revision or change of status.
Information on the current status of this and other ETSI documents is available at
http://portal.etsi.org/tb/status/status.asp
If you find errors in the present document, please send your comment to one of the following services:
http://portal.etsi.org/chaircor/ETSI_support.asp
Copyright Notification
No part may be reproduced except as authorized by written permission.
The copyright and the foregoing restriction extend to reproduction in all media.

© European Telecommunications Standards Institute 2004.
All rights reserved.

TM TM TM
DECT , PLUGTESTS and UMTS are Trade Marks of ETSI registered for the benefit of its Members.
TM
TIPHON and the TIPHON logo are Trade Marks currently being registered by ETSI for the benefit of its Members.
TM
3GPP is a Trade Mark of ETSI registered for the benefit of its Members and of the 3GPP Organizational Partners.
ETSI

---------------------- Page: 4 ----------------------

SIST EN 300 119-4 V2.1.1:2006
 3 ETSI EN 300 119-4 V2.1.1 (2004-09)
Contents
Intellectual Property Rights.4
Foreword.4
1 Scope.5
2 References.5
3 Dimensions for subracks .5
4 Accessibility.6
5 Weight.6
5.1 Unequipped subrack.6
5.2 Equipped subrack.6
6 Electromagnetic compatibility and electrostatic discharge requirements .6
Annex A (informative): Illustrative figures.8
Annex B (informative): Bibliography.10
History .11

ETSI

---------------------- Page: 5 ----------------------

SIST EN 300 119-4 V2.1.1:2006
 4 ETSI EN 300 119-4 V2.1.1 (2004-09)
Intellectual Property Rights
IPRs essential or potentially essential to the present document may have been declared to ETSI. The information
pertaining to these essential IPRs, if any, is publicly available for ETSI members and non-members, and can be found
in ETSI SR 000 314: "Intellectual Property Rights (IPRs); Essential, or potentially Essential, IPRs notified to ETSI in
respect of ETSI standards", which is available from the ETSI Secretariat. Latest updates are available on the ETSI Web
server (http://webapp.etsi.org/IPR/home.asp).
Pursuant to the ETSI IPR Policy, no investigation, including IPR searches, has been carried out by ETSI. No guarantee
can be given as to the existence of other IPRs not referenced in ETSI SR 000 314 (or the updates on the ETSI Web
server) which are, or may be, or may become, essential to the present document.
Foreword
This European Standard (Telecommunications series) has been produced by ETSI Technical Committee Environmental
Engineering (EE).
The present document is part 4 of a multi-part deliverable aimed at setting out, on a common basis, the engineering
requirements for telecommunication practice, for housing equipment forming part of a public telecommunications
network. EN 300 119-1 [2] is a general introduction and explains the terminology used. EN 300 119-2 [3] specifies the
engineering requirements for racks and cabinets and EN 300 119-3 [4] specifies the engineering requirements for
miscellaneous racks and cabinets. EN 300 119-5 [5] covers the preferred thermal management solutions for subracks,
racks/cabinets and miscellaneous racks/cabinets installed indoors in restricted access locations, for the removal of he
...