ETSI EN 301 060-2 V1.1.3 (1998-11)

Integrated Services Digital Network (ISDN); Digital Subscriber Signalling System No. one (DSS1) protocol; Basic call control; Enhancement at the b service entry point for Virtual Private Network (VPN) applications; Part 2: Protocol Implementation Conformance Statement (PICS) proforma specification

DEN/SPS-05109-2

Digitalno omrežje z integriranimi storitvami (ISDN) - Protokol digitalne naročniške signalizacije št. 1 (DSS1) - Krmiljenje osnovnega klica - Razširitev pri storitveni pristopni točki "b" za aplikacije navideznega zasebnega omrežja (VPN)- 2. del: Izjava o skladnosti izvedbe protokola (PICS) - Proforma specifikacije

General Information

• Status: Published
• Publication Date: 22-Nov-1998
• Technical Committee: SPS 5 1 - Basic Call Control Protocols
• Current Stage: 12 - Completion
• Due Date: 04-Dec-1998
• Completion Date: 23-Nov-1998
• Ref Project: SIST EN 301 060-2:2000 - Integrated Services Digital Network (ISDN); Digital Subscriber Signalling System No. one (DSS1) protocol; Basic call control; Enhancement at the b service entry point for Virtual Private Network (VPN) applications; Part 2: Protocol Implementation Conformance Statement (PICS) proforma specification

Standards Content (Sample)

2003-01.Slovenski inštitut za standardizacijo. Razmnoževanje celote ali delov tega standarda ni dovoljeno.FLMHIntegrated Services Digital Network (ISDN); Digital Subscriber Signalling System No. one (DSS1) protocol; Basic call control; Enhancement at the b service entry point for Virtual Private Network (VPN) applications; Part 2: Protocol Implementation Conformance Statement (PICS) proforma specification33.080Digitalno omrežje z integriranimi storitvami (ISDN)Integrated Services Digital Network (ISDN)ICS:Ta slovenski standard je istoveten z:EN 301 060-2 V1.1.33SIST EN 301 060-2:en01-december-3SIST EN 301 060-2:SLOVENSKI
STANDARD



SIST EN 301 060-2:2000



EN 301 060-2 V1.1.3 (1998-11)European Standard (Telecommunications series)Integrated Services Digital Network (ISDN);Digital Subscriber Signalling System No. one (DSS1) protocol;Basic call control;Enhancement at the "b" service entry point forVirtual Private Network (VPN) applications;Part 2: Protocol Implementation ConformanceStatement (PICS) proforma specificationSIST EN 301 060-2:2000



ETSIEN 301 060-2 V1.1.3 (1998-11)2ReferenceDEN/SPS-05109-2 (9tci0ie0.PDF)KeywordsISDN, DSS1, VPN, PICS, basicETSIPostal addressF-06921 Sophia Antipolis Cedex - FRANCEOffice address650 Route des Lucioles - Sophia AntipolisValbonne - FRANCETel.: [phone]
Fax: [phone]Siret N° 348 623 562 00017 - NAF 742 CAssociation à but non lucratif enregistrée à laSous-Préfecture de Grasse (06) N° 7803/[e-mail] copies of this ETSI deliverablecan be downloaded fromhttp://www.etsi.orgCopyright NotificationNo part may be reproduced except as authorized by written permission.The copyright and the foregoing restriction extend to reproduction in all media.© European Telecommunications Standards Institute 1998.All rights reserved.SIST EN 301 060-2:2000



ETSIEN 301 060-2 V1.1.3 (1998-11)3ContentsIntellectual Property Rights.5Foreword.51Scope.62Normative references.63Definitions.74Symbols and abbreviations.75Conformance.7Annex A (normative):PICS proforma for EN 301 060-1.8A.1Instructions for completing the PICS proforma.8A.1.1Identification of the implementation.8A.1.2Global statement of conformance.8A.1.3Explanation of PICS proforma subclauses.8A.1.4Symbols, abbreviations and terms.9A.2Identification of the implementation.9A.2.1Implementation Under Test (IUT) identification.9A.2.2System Under Test (SUT) identification.9A.2.3Product supplier.10A.2.4Client.10A.2.5PICS contact person.11A.3PICS/System Conformance Statement (SCS).11A.4Identification of the protocol.11A.5Global statement of conformance.11A.6Roles.12A.7User.12A.7.1Type of implementation.12A.7.2Major capabilities.13A.7.3Subsidiary capabilities.13A.7.4Protocol data units.13A.7.4.1Message received by the user.13A.7.4.2Message transmitted by the user.13A.7.5Protocol data unit parameters.14A.7.5.1Information elements in message received by the user.14A.7.5.2Information elements in message transmitted by the user.14A.7.5.3Information elements structure.17A.7.6Timers.22A.8Network.22A.8.1Type of implementation.22A.8.2Major capabilities.23A.8.3Subsidiary capabilities.23A.8.4Protocol data units.23A.8.4.1Message received by the network.23A.8.4.2Message transmitted by the network.24A.8.5Protocol data unit parameters.24A.8.5.1Information elements in message received by the network.24A.8.5.2Information elements in message transmitted by the network.25A.8.5.3Information elements structure.28A.8.6Timers.33SIST EN 301 060-2:2000



ETSIEN 301 060-2 V1.1.3 (1998-11)4Annex B (normative):Requirements list.34B.1User.34B.2Network.35History.36SIST EN 301 060-2:2000



ETSIEN 301 060-2 V1.1.3 (1998-11)5Intellectual Property RightsIPRs essential or potentially essential to the present document may have been declared to ETSI. The informationpertaining to these essential IPRs, if any, is publicly available for ETSI members and non-members, and can be foundin SR 000 314: "Intellectual Property Rights (IPRs); Essential, or potentially Essential, IPRs notified to ETSI in respectof ETSI standards", which is available free of charge from the ETSI Secretariat. Latest updates are available on theETSI Web server (http://www.etsi.org/ipr).Pursuant to the ETSI IPR Policy, no investigation, including IPR searches, has been carried out by ETSI. No guaranteecan be given as to the existence of other IPRs not referenced in SR 000 314 (or the updates on the ETSI Web server)which are, or may be, or may become, essential to the present document.ForewordThis European Standard (Telecommunications series) has been produced by ETSI Technical Committee SignallingProtocols and Switching (SPS).The present document is part 2 of a multi-part standard covering the Digital Subscriber Signalling System No. one(DSS1) protocol specification for the Integrated Services Digital Network (ISDN); Basic call control; Enhancement atthe "b" service entry point for Virtual Private Network (VPN) applications, as described below:Part 1:"Protocol specification";Part 2:"Protocol Implementation Conformance Statement (PICS) proforma specification";Part 3:"Test Suite Structure and Test Purposes (TSS&TP) specification for the user";Part 4:"Abstract Test Suite (ATS) and partial Protocol Implementation eXtra Information for Testing (PIXIT)proforma specification for the user";Part 5:"Test Suite Structure and Test Purposes (TSS&TP) specification for the network";Part 6:"Abstract Test Suite (ATS) and partial Protocol Implementation eXtra Information for Testing (PIXIT)proforma specification for the network".To evaluate conformance of a particular implementation, it is necessary to have a statement of which capabilities andoptions have been implemented for a given Open Systems Interconnection (OSI) protocol. Such a statement is called aProtocol Implementation Conformance Statement (PICS).National transposition datesDate of adoption of this EN:20 November 1998Date of latest announcement of this EN (doa):28 February 1999Date of latest publication of new National Standardor endorsement of this EN (dop/e):31 August 1999Date of withdrawal of any conflicting National Standard (dow):31 August 1999SIST EN 301 060-2:2000



ETSIEN 301 060-2 V1.1.3 (1998-11)61ScopeThis second part of EN 301 060 is applicable to the basic call control extensions for Virtual Private Network (VPN) forthe pan-European Integrated Services Digital Network (ISDN) as provided by European public telecommunicationsoperators at the "b" service entry point (as defined in EN 301 060-1 [4]) by means of the Digital Subscriber SignallingSystem No. one (DSS1) protocol.The present document provides the Protocol Implementation Conformance Statement (PICS) proforma for the ISDNDSS1 basic call control extensions at the "b" service entry point for VPN applications as specified in EN 301 060-1 [4]in compliance with the relevant requirements and in accordance with the relevant guidance given in ISO/IEC 9646-7 [6].The supplier of a protocol implementation which is claimed to conform to EN 301 060-1 [4] is required to complete acopy of the PICS proforma provided in annex A of the present document and is required to provide the informationnecessary to identify both the supplier and the implementation.2Normative referencesReferences may be made to:a)specific versions of publications (identified by date of publication, edition number, version number, etc.), inwhich case, subsequent revisions to the referenced document do not apply; orb)all versions up to and including the identified version (identified by "up to and including" before the versionidentity); orc)all versions subsequent to and including the identified version (identified by "onwards" following the versionidentity); ord)publications without mention of a specific version, in which case the latest version applies.A non-specific reference to an ETS shall also be taken to refer to later versions published as an EN with the samenumber.[1]EN 300 196-1 (V1.2): "Integrated Services Digital Network (ISDN); Generic functional protocolfor the support of supplementary services; Digital Subscriber Signalling System No. one (DSS1)protocol; Part 1: Protocol specification".[2]EN 300 403-1: "Integrated Services Digital Network (ISDN); Digital Subscriber Signalling SystemNo. one (DSS1) protocol; Signalling network layer for circuit-mode basic call control;Part 1: Protocol specification [ITU-T Recommendation Q.931 (1993), modified]".[3]EN 300 403-3: "Integrated Services Digital Network (ISDN); Digital Subscriber Signalling SystemNo. one (DSS1) protocol; Signalling network layer for circuit-mode basic call control;Part 3: Protocol Implementation Conformance Statement (PICS) proforma specification".[4]EN 301 060-1 (V1.2): "Integrated Services Digital Network (ISDN); Digital Subscriber SignallingSystem No. one (DSS1) protocol; Basic call applications; Enhancement at the "b" service entrypoint for Virtual Private Network (VPN) applications; Part 1: Protocol specification".[5]ISO/IEC 9646-1 (1994): "Information technology; Open Systems Interconnection; Conformancetesting methodology and framework; Part 1: General concepts".[6]ISO/IEC 9646-7 (1995): "Information technology; Open systems interconnection; Conformancetesting methodology and framework; Part 7: Implementation Conformance Statements".[7]ISO/IEC 15056 (1997): "Information technology; Telecommunications and information exchangebetween systems; Private Integrate Service Network; Inter-exchange signalling protocol; Transitcounter additional network feature".SIST EN 301 060-2:2000



ETSIEN 301 060-2 V1.1.3 (1998-11)73DefinitionsFor the purposes of the present document, the terms and definitions given in EN 300 403-1 [2] and EN 301 060-1 [4]and the following apply.Protocol Implementation Conformance Statement (PICS): a statement made by the supplier of an OSIimplementation or system, stating which capabilities have been implemented for a given OSI protocol (seeISO/IEC 9646-1 [5]).PICS proforma: a document, in the form of a questionnaire, designed by the protocol specifier or conformance testsuite specifier, which, when completed for an OSI implementation or system becomes the PICS (seeISO/IEC 9646-1 [5]).static conformance review: a review of the extent to which the static conformance requirements are met by theImplementation Under Test (IUT), accomplished by comparing the PICS with the static conformance requirementsexpressed in the relevant standard(s) (see ISO/IEC 9646-1 [5]).4Symbols and abbreviationsFor the purposes of the present document, the following abbreviations apply:CConditional requirement (to be observed if the relevant conditions apply)DSS1Digital Subscriber Signalling System No. oneISDNIntegrated Services Digital NetworkIUTImplementation Under TestMMandatory requirement (to be observed in all cases)MCMajor CapabilitiesMTMessages TransmittedN/ANot applicable, not supported or the conditions for status are not metNonot supportedNOTBoolean "not"OOption (may be selected to suit the implementation, provided that any requirements applicable tothe option are observed)OSIOpen Systems InterconnectionPICSProtocol Implementation Conformance StatementRRoleRLRequirements ListSCSSystem Conformance StatementSUTSystem Under TestTIType of ImplementationVPNVirtual Private NetworkYessupported5ConformanceA PICS proforma which conforms to this PICS proforma specification shall be technically equivalent to annex A, andshall preserve the numbering and ordering of the items in annex A.A PICS which conforms to this PICS proforma specification shall:a)describe an implementation which claims to conform to EN 301 060-1 [4];b)be a conforming ICS proforma which has been completed in accordance with the instructions for completiongiven in annex A, clause A.1;c)include the information necessary to uniquely identify both the supplier and the implementation.SIST EN 301 060-2:2000



ETSIEN 301 060-2 V1.1.3 (1998-11)8Annex A (normative):PICS proforma for EN 301 060-1Notwithstanding the provisions of the copyright clause related to the text of the present document, ETSI grants that usersof the present document may freely reproduce the PICS proforma in this annex so that it can be used for its intendedpurposes and may further publish the completed PICS.A.1Instructions for completing the PICS proformaA.1.1Identification of the implementationIdentification of the IUT and the system in which it resides (the System Under Test (SUT)) should be filled in so as toprovide as much detail as possible regarding version numbers and configuration options.The product supplier information and client information should both be filled in if they are different.A person who can answer queries regarding information supplied in the PICS should be named as the contact person.The System Conformance Statement (SCS) as defined in ISO/IEC 9646-1 [5] is a document supplied by the client orproduct supplier that summarizes which OSI International Standards, ITU-T (CCITT) Recommendations, ETSs or otherstandards are implemented and to which conformance is claimed. The PICS/SCS subclause should describe therelationship of the PICS to the SCS.A.1.2Global statement of conformanceIf the answer to the statement in this subclause is "Yes", all subsequent subclauses should be completed to facilitateselection of test cases for optional functions.If the answer to the statement in this subclause is "No", all subsequent subclauses should be completed, and allnon-supported mandatory capabilities should be identified and explained. Explanations may be entered in the commentsfield at the bottom of each table or on attached sheets of paper.A.1.3Explanation of PICS proforma subclausesThe PICS proforma contains a Roles clause and thereafter is presented in two parts (for user and network) with thefollowing subclauses, as required:-major capabilities;-subsidiary capabilities;-protocol data unit support;-protocol data unit parameters;-timers;-call states.The User clause shall only be completed for user implementations (including private network implementations) whilethe Network clause shall only be completed for network implementations. The Roles subclause shall be completed forall implementations.The relationship between this PICS proforma and other related PICS proforma (e.g. the basic call PICS proforma) isexpressed in the Requirements List (RL) contained in annex B. This provides the additional restrictions placed on therelated proforma (different conditions, different status, etc.).SIST EN 301 060-2:2000



ETSIEN 301 060-2 V1.1.3 (1998-11)9A.1.4Symbols, abbreviations and termsThe PICS proforma contained in this annex is comprised of information in tabular form in accordance with theguidelines presented in ISO/IEC 9646-7 [6].The reference column contained in the tables gives reference to the appropriate part(s) of EN 301 060-1 [4] describingthe particular item. Note, however, that a reference merely indicates the place where the core of a description of an itemcan be found. Any additional information contained in EN 301 060-1 [4] has to be taken into account when making astatement about the conformance of that particular item.The following common notations, defined in ISO/IEC 9646-7 [6], are used for the status column:MmandatoryOoptionalN/Anot applicableO.for mutually exclusive or selectable options from a setThe following common notations, defined in ISO/IEC 9646-7 [6], are used for the support column:Yfor supported / implementedNfor not supported / not implementedA.2Identification of the implementationA.2.1Implementation Under Test (IUT) identificationIUT name:.IUT version:.A.2.2System Under Test (SUT) identificationSUT name:.Hardware configuration:.Operating system:.SIST EN 301 060-2:2000



ETSIEN 301 060-2 V1.1.3 (1998-11)10A.2.3Product supplierName:.Address:.Telephone number:.Facsimile number:.Additional information:.A.2.4ClientName:.Address:.Telephone number:.Facsimile number:.Additional information:.SIST EN 301 060-2:2000



ETSIEN 301 060-2 V1.1.3 (1998-11)11A.2.5PICS contact personName:.Address:.Telephone number:.Facsimile number:.Additional information:.A.3PICS/System Conformance Statement (SCS)Provide the relationship of the PICS with the SCS for the system:.A.4Identification of the protocol
...

SLOVENSKI STANDARD
SIST EN 301 060-2:2000
01-december-2000
'LJLWDOQRRPUHåMH]LQWHJULUDQLPLVWRULWYDPL,6'13URWRNROGLJLWDOQHQDURþQLãNH
VLJQDOL]DFLMHãW'66.UPLOMHQMHRVQRYQHJDNOLFD5D]ãLULWHYSULVWRULWYHQL
SULVWRSQLWRþNLE]DDSOLNDFLMHQDYLGH]QHJD]DVHEQHJDRPUHåMD931GHO
,]MDYDRVNODGQRVWLL]YHGEHSURWRNROD3,&63URIRUPDVSHFLILNDFLMH
Integrated Services Digital Network (ISDN); Digital Subscriber Signalling System No. one
(DSS1) protocol; Basic call control; Enhancement at the b service entry point for Virtual
Private Network (VPN) applications; Part 2: Protocol Implementation Conformance
Statement (PICS) proforma specification
Ta slovenski standard je istoveten z: EN 301 060-2 Version 1.1.3
ICS:
33.080 Digitalno omrežje z Integrated Services Digital
integriranimi storitvami Network (ISDN)
(ISDN)
SIST EN 301 060-2:2000 en
2003-01.Slovenski inštitut za standardizacijo. Razmnoževanje celote ali delov tega standarda ni dovoljeno.

---------------------- Page: 1 ----------------------

SIST EN 301 060-2:2000

---------------------- Page: 2 ----------------------

SIST EN 301 060-2:2000
EN 301 060-2 V1.1.3 (1998-11)
European Standard (Telecommunications series)
Integrated Services Digital Network (ISDN);
Digital Subscriber Signalling System No. one (DSS1) protocol;
Basic call control;
Enhancement at the "b" service entry point for
Virtual Private Network (VPN) applications;
Part 2: Protocol Implementation Conformance
Statement (PICS) proforma specification

---------------------- Page: 3 ----------------------

SIST EN 301 060-2:2000
2 EN 301 060-2 V1.1.3 (1998-11)
Reference
DEN/SPS-05109-2 (9tci0ie0.PDF)
Keywords
ISDN, DSS1, VPN, PICS, basic
ETSI
Postal address
F-06921 Sophia Antipolis Cedex - FRANCE
Office address
650 Route des Lucioles - Sophia Antipolis
Valbonne - FRANCE
Tel.: [phone]  Fax: [phone]
Siret N° 348 623 562 00017 - NAF 742 C
Association à but non lucratif enregistrée à la
Sous-Préfecture de Grasse (06) N° 7803/88
Internet
[e-mail]
Individual copies of this ETSI deliverable
can be downloaded from
http://www.etsi.org
Copyright Notification
No part may be reproduced except as authorized by written permission.
The copyright and the foregoing restriction extend to reproduction in all media.
© European Telecommunications Standards Institute 1998.
All rights reserved.
ETSI

---------------------- Page: 4 ----------------------

SIST EN 301 060-2:2000
3 EN 301 060-2 V1.1.3 (1998-11)
Contents
Intellectual Property Rights.5
Foreword .5
1 Scope.6
2 Normative references .6
3 Definitions.7
4 Symbols and abbreviations .7
5 Conformance.7
Annex A (normative): PICS proforma for EN 301 060-1 .8
A.1 Instructions for completing the PICS proforma.8
A.1.1 Identification of the implementation . 8
A.1.2 Global statement of conformance . 8
A.1.3 Explanation of PICS proforma subclauses. 8
A.1.4 Symbols, abbreviations and terms. 9
A.2 Identification of the implementation.9
A.2.1 Implementation Under Test (IUT) identification . 9
A.2.2 System Under Test (SUT) identification. 9
A.2.3 Product supplier. 10
A.2.4 Client . 10
A.2.5 PICS contact person. 11
A.3 PICS/System Conformance Statement (SCS).11
A.4 Identification of the protocol .11
A.5 Global statement of conformance .11
A.6 Roles.12
A.7 User .12
A.7.1 Type of implementation. 12
A.7.2 Major capabilities . 13
A.7.3 Subsidiary capabilities . 13
A.7.4 Protocol data units . 13
A.7.4.1 Message received by the user. 13
A.7.4.2 Message transmitted by the user. 13
A.7.5 Protocol data unit parameters. 14
A.7.5.1 Information elements in message received by the user. 14
A.7.5.2 Information elements in message transmitted by the user . 14
A.7.5.3 Information elements structure. 17
A.7.6 Timers. 22
A.8 Network.22
A.8.1 Type of implementation. 22
A.8.2 Major capabilities . 23
A.8.3 Subsidiary capabilities . 23
A.8.4 Protocol data units . 23
A.8.4.1 Message received by the network. 23
A.8.4.2 Message transmitted by the network . 24
A.8.5 Protocol data unit parameters. 24
A.8.5.1 Information elements in message received by the network . 24
A.8.5.2 Information elements in message transmitted by the network . 25
A.8.5.3 Information elements structure. 28
A.8.6 Timers. 33
ETSI

---------------------- Page: 5 ----------------------

SIST EN 301 060-2:2000
4 EN 301 060-2 V1.1.3 (1998-11)
Annex B (normative): Requirements list.34
B.1 User .34
B.2 Network.35
History.36
ETSI

---------------------- Page: 6 ----------------------

SIST EN 301 060-2:2000
5 EN 301 060-2 V1.1.3 (1998-11)
Intellectual Property Rights
IPRs essential or potentially essential to the present document may have been declared to ETSI. The information
pertaining to these essential IPRs, if any, is publicly available for ETSI members and non-members, and can be found
in SR 000 314: "Intellectual Property Rights (IPRs); Essential, or potentially Essential, IPRs notified to ETSI in respect
of ETSI standards", which is available free of charge from the ETSI Secretariat. Latest updates are available on the
ETSI Web server (http://www.etsi.org/ipr).
Pursuant to the ETSI IPR Policy, no investigation, including IPR searches, has been carried out by ETSI. No guarantee
can be given as to the existence of other IPRs not referenced in SR 000 314 (or the updates on the ETSI Web server)
which are, or may be, or may become, essential to the present document.
Foreword
This European Standard (Telecommunications series) has been produced by ETSI Technical Committee Signalling
Protocols and Switching (SPS).
The present document is part 2 of a multi-part standard covering the Digital Subscriber Signalling System No. one
(DSS1) protocol specification for the Integrated Services Digital Network (ISDN); Basic call control; Enhancement at
the "b" service entry point for Virtual Private Network (VPN) applications, as described below:
Part 1: "Protocol specification";
Part 2: "Protocol Implementation Conformance Statement (PICS) proforma specification";
Part 3: "Test Suite Structure and Test Purposes (TSS&TP) specification for the user";
Part 4: "Abstract Test Suite (ATS) and partial Protocol Implementation eXtra Information for Testing (PIXIT)
proforma specification for the user";
Part 5: "Test Suite Structure and Test Purposes (TSS&TP) specification for the network";
Part 6: "Abstract Test Suite (ATS) and partial Protocol Implementation eXtra Information for Testing (PIXIT)
proforma specification for the network".
To evaluate conformance of a particular implementation, it is necessary to have a statement of which capabilities and
options have been implemented for a given Open Systems Interconnection (OSI) protocol. Such a statement is called a
Protocol Implementation Conformance Statement (PICS).
National transposition dates
Date of adoption of this EN: 20 November 1998
Date of latest announcement of this EN (doa): 28 February 1999
Date of latest publication of new National Standard
or endorsement of this EN (dop/e): 31 August 1999
Date of withdrawal of any conflicting National Standard (dow): 31 August 1999
ETSI

---------------------- Page: 7 ----------------------

SIST EN 301 060-2:2000
6 EN 301 060-2 V1.1.3 (1998-11)
1 Scope
This second part of EN 301 060 is applicable to the basic call control extensions for Virtual Private Network (VPN) for
the pan-European Integrated Services Digital Network (ISDN) as provided by European public telecommunications
operators at the "b" service entry point (as defined in EN 301 060-1 [4]) by means of the Digital Subscriber Signalling
System No. one (DSS1) protocol.
The present document provides the Protocol Implementation Conformance Statement (PICS) proforma for the ISDN
DSS1 basic call control extensions at the "b" service entry point for VPN applications as specified in EN 301 060-1 [4]
in compliance with the relevant requirements and in accordance with the relevant guidance given in ISO/IEC 9646-7 [6].
The supplier of a protocol implementation which is claimed to conform to EN 301 060-1 [4] is required to complete a
copy of the PICS proforma provided in annex A of the present document and is required to provide the information
necessary to identify both the supplier and the implementation.
2 Normative references
References may be made to:
a) specific versions of publications (identified by date of publication, edition number, version number, etc.), in
which case, subsequent revisions to the referenced document do not apply; or
b) all versions up to and including the identified version (identified by "up to and including" before the version
identity); or
c) all versions subsequent to and including the identified version (identified by "onwards" following the version
identity); or
d) publications without mention of a specific version, in which case the latest version applies.
A non-specific reference to an ETS shall also be taken to refer to later versions published as an EN with the same
number.
[1] EN 300 196-1 (V1.2): "Integrated Services Digital Network (ISDN); Generic functional protocol
for the support of supplementary services; Digital Subscriber Signalling System No. one (DSS1)
protocol; Part 1: Protocol specification".
[2] EN 300 403-1: "Integrated Services Digital Network (ISDN); Digital Subscriber Signalling System
No. one (DSS1) protocol; Signalling network layer for circuit-mode basic call control;
Part 1: Protocol specification [ITU-T Recommendation Q.931 (1993), modified]".
[3] EN 300 403-3: "Integrated Services Digital Network (ISDN); Digital Subscriber Signalling System
No. one (DSS1) protocol; Signalling network layer for circuit-mode basic call control;
Part 3: Protocol Implementation Conformance Statement (PICS) proforma specification".
[4] EN 301 060-1 (V1.2): "Integrated Services Digital Network (ISDN); Digital Subscriber Signalling
System No. one (DSS1) protocol; Basic call applications; Enhancement at the "b" service entry
point for Virtual Private Network (VPN) applications; Part 1: Protocol specification".
[5] ISO/IEC 9646-1 (1994): "Information technology; Open Systems Interconnection; Conformance
testing methodology and framework; Part 1: General concepts".
[6] ISO/IEC 9646-7 (1995): "Information technology; Open systems interconnection; Conformance
testing methodology and framework; Part 7: Implementation Conformance Statements".
[7] ISO/IEC 15056 (1997): "Information technology; Telecommunications and information exchange
between systems; Private Integrate Service Network; Inter-exchange signalling protocol; Transit
counter additional network feature".
ETSI

---------------------- Page: 8 ----------------------

SIST EN 301 060-2:2000
7 EN 301 060-2 V1.1.3 (1998-11)
3 Definitions
For the purposes of the present document, the terms and definitions given in EN 300 403-1 [2] and EN 301 060-1 [4]
and the following apply.
Protocol Implementation Conformance Statement (PICS): a statement made by the supplier of an OSI
implementation or system, stating which capabilities have been implemented for a given OSI protocol (see
ISO/IEC 9646-1 [5]).
PICS proforma: a document, in the form of a questionnaire, designed by the protocol specifier or conformance test
suite specifier, which, when completed for an OSI implementation or system becomes the PICS (see
ISO/IEC 9646-1 [5]).
static conformance review: a review of the extent to which the static conformance requirements are met by the
Implementation Under Test (IUT), accomplished by comparing the PICS with the static conformance requirements
expressed in the relevant standard(s) (see ISO/IEC 9646-1 [5]).
4 Symbols and abbreviations
For the purposes of the present document, the following abbreviations apply:
C Conditional requirement (to be observed if the relevant conditions apply)
DSS1 Digital Subscriber Signalling System No. one
ISDN Integrated Services Digital Network
IUT Implementation Under Test
M Mandatory requirement (to be observed in all cases)
MC Major Capabilities
MT Messages Transmitted
N/A Not applicable, not supported or the conditions for status are not met
No not supported
NOT
Boolean "not"
O Option (may be selected to suit the implementation, provided that any requirements applicable to
the option are observed)
OSI Open Systems Interconnection
PICS Protocol Implementation Conformance Statement
R Role
RL Requirements List
SCS System Conformance Statement
SUT System Under Test
TI Type of Implementation
VPN Virtual Private Network
Yes supported
5 Conformance
A PICS proforma which conforms to this PICS proforma specification shall be technically equivalent to annex A, and
shall preserve the numbering and ordering of the items in annex A.
A PICS which conforms to this PICS proforma specification shall:
a) describe an implementation which claims to conform to EN 301 060-1 [4];
b) be a conforming ICS proforma which has been completed in accordance with the instructions for completion
given in annex A, clause A.1;
c) include the information necessary to uniquely identify both the supplier and the implementation.
ETSI

---------------------- Page: 9 ----------------------

SIST EN 301 060-2:2000
8 EN 301 060-2 V1.1.3 (1998-11)
Annex A (normative):
PICS proforma for EN 301 060-1
Notwithstanding the provisions of the copyright clause related to the text of the present document, ETSI grants that users
of the present document may freely reproduce the PICS proforma in this annex so that it can be used for its intended
purposes and may further publish the completed PICS.
A.1 Instructions for completing the PICS proforma
A.1.1 Identification of the implementation
Identification of the IUT and the system in which it resides (the System Under Test (SUT)) should be filled in so as to
provide as much detail as possible regarding version numbers and configuration options.
The product supplier information and client information should both be filled in if they are different.
A person who can answer queries regarding information supplied in the PICS should be named as the contact person.
The System Conformance Statement (SCS) as defined in ISO/IEC 9646-1 [5] is a document supplied by the client or
product supplier that summarizes which OSI International Standards, ITU-T (CCITT) Recommendations, ETSs or other
standards are implemented and to which conformance is claimed. The PICS/SCS subclause should describe the
relationship of the PICS to the SCS.
A.1.2 Global statement of conformance
If the answer to the statement in this subclause is "Yes", all subsequent subclauses should be completed to facilitate
selection of test cases for optional functions.
If the answer to the statement in this subclause is "No", all subsequent subclauses should be completed, and all
non-supported mandatory capabilities should be identified and explained. Explanations may be entered in the comments
field at the bottom of each table or on attached sheets of paper.
A.1.3 Explanation of PICS proforma subclauses
The PICS proforma contains a Roles clause and thereafter is presented in two parts (for user and network) with the
following subclauses, as required:
- major capabilities;
- subsidiary capabilities;
- protocol data unit support;
- protocol data unit parameters;
- timers;
- call states.
The User clause shall only be completed for user implementations (including private network implementations) while
the Network clause shall only be completed for network implementations. The Roles subclause shall be completed for
all implementations.
The relationship between this PICS proforma and other related PICS proforma (e.g. the basic call PICS proforma) is
expressed in the Requirements List (RL) contained in annex B. This provides the additional restrictions placed on the
related proforma (different conditions, different status, etc.).
ETSI

---------------------- Page: 10 ----------------------

SIST EN 301 060-2:2000
9 EN 301 060-2 V1.1.3 (1998-11)
A.1.4 Symbols, abbreviations and terms
The PICS proforma contained in this annex is comprised of information in tabular form in accordance with the
guidelines presented in ISO/IEC 9646-7 [6].
The reference column contained in the tables gives reference to the appropriate part(s) of EN 301 060-1 [4] describing
the particular item. Note, however, that a reference merely indicates the place where the core of a description of an item
can be found. Any additional information contained in EN 301 060-1 [4] has to be taken into account when making a
statement about the conformance of that particular item.
The following common notations, defined in ISO/IEC 9646-7 [6], are used for the status column:
M mandatory
O optional
N/A not applicable
O. for mutually exclusive or selectable options from a set
The following common notations, defined in ISO/IEC 9646-7 [6], are used for the support column:
Y for supported / implemented
N for not supported / not implemented
A.2 Identification of the implementation
A.2.1 Implementation Under Test (IUT) identification
IUT name:
.........................................................................................................................................................................................
.........................................................................................................................................................................................
IUT version:
.........................................................................................................................................................................................
A.2.2 System Under Test (SUT) identification
SUT name:
.........................................................................................................................................................................................
.........................................................................................................................................................................................
Hardware configuration:
.........................................................................................................................................................................................
.........................................................................................................................................................................................
.........................................................................................................................................................................................
Operating system:
.........................................................................................................................................................................................
.........................................................................................................................................................................................
ETSI

---------------------- Page: 11 ----------------------

SIST EN 301 060-2:2000
10 EN 301 060-2 V1.1.3 (1998-11)
A.2.3 Product supplier
Name:
.........................................................................................................................................................................................
Address:
.........................................................................................................................................................................................
.........................................................................................................................................................................................
.........................................................................................................................................................................................
Telephone number:
.........................................................................................................................................................................................
Facsimile number:
.........................................................................................................................................................................................
Additional information:
.........................................................................................................................................................................................
.........................................................................................................................................................................................
.........................................................................................................................................................................................
A.2.4 Client
Name:
.........................................................................................................................................................................................
Address:
.........................................................................................................................................................................................
.........................................................................................................................................................................................
.........................................................................................................................................................................................
Telephone number:
.........................................................................................................................................................................................
Facsimile number:
.........................................................................................................................................................................................
Additional information:
.........................................................................................................................................................................................
.........................................................................................................................................................................................
.........................................................................................................................................................................................
ETSI

---------------------- Page: 12 ----------------------

SIST EN 301 060-2:2000
11 EN 301 060-2 V1.1.3 (1998-11)
A.2.5 PICS contact person
Name:
.........................................................................................................................................................................................
Address:
.........................................................................................................................................................................................
.........................................................................................................................................................................................
.........................................................................................................................................................................................
Telephone number:
.........................................................................................................................................................................................
Facsimile number:
...........................................................................
...