ETSI EN 300 910 V8.3.1 (2000-09)

Digital cellular telecommunications system (Phase 2+) (GSM); Radio transmission and reception (GSM 05.05 version 8.3.1 Release 1999)

REN/SMG-020505Q8

Digitalni celični telekomunikacijski sistem (faza 2+) – Radijsko oddajanje in sprejemanje (GSM 05.05, različica 8.3.1, izdaja 1999)

General Information

• Status: Published
• Publication Date: 28-Sep-2000
• Technical Committee: SMG 2 - Radio
• Current Stage: 12 - Completion
• Due Date: 01-Sep-2000
• Completion Date: 29-Sep-2000
• Ref Project: SIST EN 300 910 V8.3.1:2003 - Digital cellular telecommunications system (Phase 2+) (GSM); Radio transmission and reception (GSM 05.05 version 8.3.1 Release 1999)

Standards Content (Sample)

SLOVENSKI STANDARD
SIST EN 300 910 V8.3.1:2003
01-december-2003
'LJLWDOQLFHOLþQLWHOHNRPXQLNDFLMVNLVLVWHPID]D±5DGLMVNRRGGDMDQMHLQ
VSUHMHPDQMH*60UD]OLþLFDL]GDMD
Digital cellular telecommunications system (Phase 2+) (GSM); Radio transmission and
reception (GSM 05.05 version 8.3.1 Release 1999)
Ta slovenski standard je istoveten z: EN 300 910 Version 8.3.1
ICS:
33.070.50 Globalni sistem za mobilno Global System for Mobile
telekomunikacijo (GSM) Communication (GSM)
SIST EN 300 910 V8.3.1:2003 en
2003-01.Slovenski inštitut za standardizacijo. Razmnoževanje celote ali delov tega standarda ni dovoljeno.

---------------------- Page: 1 ----------------------

SIST EN 300 910 V8.3.1:2003

---------------------- Page: 2 ----------------------

SIST EN 300 910 V8.3.1:2003
ETSI EN 300 910 V8.3.1 (2000-09)
European Standard (Telecommunications series)
Digital cellular telecommunications system (Phase 2+);
Radio transmission and reception
(GSM 05.05 version 8.3.1 Release 1999)
R
GLOBAL SYSTEM FOR
MOBILE COMMUNICATIONS

---------------------- Page: 3 ----------------------

SIST EN 300 910 V8.3.1:2003
(GSM 05.05 version 8.3.1 Release 1999) 2 ETSI EN 300 910 V8.3.1 (2000-09)
Reference
REN/SMG-020505Q8
Keywords
Digital cellular telecommunications system,
Global System for Mobile communications (GSM)
ETSI
650 Route des Lucioles
F-06921 Sophia Antipolis Cedex - FRANCE
Tel.:[phone] Fax:[phone]
Siret N° 348 623 562 00017 - NAF 742 C
Association à but non lucratif enregistrée à la
Sous-Préfecture de Grasse (06) N° 7803/88
Important notice
Individual copies of the present document can be downloaded from:
http://www.etsi.org
The present document may be made available in more than one electronic version or in print. In any case of existing or
perceived difference in contents between such versions, the reference version is the Portable Document Format (PDF).
In case of dispute, the reference shall be the printing on ETSI printers of the PDF version kept on a specific network drive
within ETSI Secretariat.
Users of the present document should be aware that the document may be subject to revision or change of status.
Information on the current status of this and other ETSI documents is available at http://www.etsi.org/tb/status/
If you find errors in the present document, send your comment to:
[e-mail]
Copyright Notification
No part may be reproduced except as authorized by written permission.
The copyright and the foregoing restriction extend to reproduction in all media.
© European Telecommunications Standards Institute 2000.
All rights reserved.
ETSI

---------------------- Page: 4 ----------------------

SIST EN 300 910 V8.3.1:2003
(GSM 05.05 version 8.3.1 Release 1999) 3 ETSI EN 300 910 V8.3.1 (2000-09)
Contents
Intellectual Property Rights.6
Foreword.6
1 Scope .7
1.1 References .8
1.2 Abbreviations .9
2 Frequency bands and channel arrangement.9
3 Reference configuration .10
4 Transmitter characteristics .10
4.1 Output power.11
4.1.1 Mobile Station .11
4.1.2 Base station.14
4.1.2.1 Additional requirements for PCS 1 900 and MXM 1900 Base stations.14
4.1.2.2 Additional requirements for MXM 850 Base stations .15
4.2 Output RF spectrum .15
4.2.1 Spectrum due to the modulation and wide band noise.15
4.2.2 Spectrum due to switching transients .19
4.3 Spurious emissions.20
4.3.1 Principle of the specification .20
4.3.2 Base Transceiver Station .21
4.3.3 Mobile Station .22
4.3.3.1 Mobile Station GSM 400, GSM 900 and DCS 1 800 .22
4.3.3.2 Mobile Station GSM 850 and PCS 1 900.23
4.4 Radio frequency tolerance.23
4.5 Output level dynamic operation .23
4.5.1 Base Transceiver Station .24
4.5.2 Mobile Station .24
4.6 Modulation accuracy .24
4.6.1 GMSK modulation.24
4.6.2 8-PSK modulation .25
4.6.2.1 RMS EVM .25
4.6.2.2 Origin Offset Suppression.25
4.6.2.3 Peak EVM.25
4.6.2.4 95:th percentile.26
4.7 Intermodulation attenuation.26
4.7.1 Base transceiver station .26
4.7.2 Intra BTS intermodulation attenuation .26
4.7.2.1 GSM 400, GSM 900, DCS 1800.26
4.7.2.2 MXM 850 and MXM 1900.26
4.7.2.3 PCS 1900 .27
4.7.3 Intermodulation between MS (DCS 1 800 & PCS 1 900 only) .27
4.7.4 Mobile PBX (GSM 900 only).27
5 Receiver characteristics.27
5.1 Blocking characteristics .27
5.2 AM suppression characteristics.30
5.3 Intermodulation characteristics .31
5.4 Spurious emissions.31
6 Transmitter/receiver performance .32
6.1 Nominal Error Rates (NER) .32
6.1.1 GMSK modulation.33
6.1.2 8-PSK modulation .33
6.2 Reference sensitivity level.34
6.3 Reference interference level .37
6.4 Erroneous frame indication performance .38
ETSI

---------------------- Page: 5 ----------------------

SIST EN 300 910 V8.3.1:2003
(GSM 05.05 version 8.3.1 Release 1999) 4 ETSI EN 300 910 V8.3.1 (2000-09)
6.5 Random access and paging performance at high input levels .39
6.6 Frequency hopping performance under interference conditions. .39
6.7 Incremental Redundancy Performance for EGPRS MS. .39
Annex A (informative): Spectrum characteristics (spectrum due to the modulation).59
Annex B (normative): Transmitted power level versus time .71
Annex C (normative): Propagation conditions.75
C.1 Simple wideband propagation model .75
C.2 Doppler spectrum types.75
C.3 Propagation models.76
C.3.1 Typical case for rural area (RAx): (6 tap setting).76
C.3.2 Typical case for hilly terrain (HTx): (12 tap setting).76
C.3.3 Typical case for urban area (TUx): (12 tap setting).77
C.3.4 Profile for equalization test (EQx): (6 tap setting) .77
C.3.5 Typical case for very small cells (TIx): (2 tap setting).77
Annex D (normative): Environmental conditions .78
D.1 General .78
D.2 Environmental requirements for the MSs.78
D.2.1 Temperature (GSM 400, GSM 900 and DCS 1 800) .78
D.2.1.1 Environmental Conditions (PCS 1 900 and GSM 850) .78
D.2.2 Voltage .78
D.2.3 Vibration (GSM 400, GSM 900 and DCS 1 800) .79
D.2.3.1 Vibration (PCS 1 900 and GSM 850).79
D.3 Environmental requirements for the BSS equipment.79
D.3.1 Environmental requirements for the BSS equipment .80
Annex E (normative): Repeater characteristics (GSM 400, GSM GSM 900 and DCS 1800).81
E.1 Introduction .81
E.2 Spurious emissions.81
E.3 Intermodulation products .82
E.4 Out of band gain.82
E.5 Frequency error and modulation accuracy .82
Annex F (normative): Antenna Feeder Loss Compensator Characteristics (GSM 400, GSM
900 and DCS 1800).83
F.1 Introduction .83
F.2 Transmitting path .83
F.2.1 Maximum output power .84
F.2.2 Gain .84
F.2.3 Burst transmission characteristics .84
F.2.4 Phase error.85
F.2.5 Frequency error .85
F.2.6 Group delay.85
F.2.7 Spurious emissions.85
F.2.8 VSWR .86
F.2.9 Stability .86
F.3 Receiving path.86
F.3.1 Gain .86
F.3.2 Noise figure.86
F.3.3 Group delay.87
F.3.4 Intermodulation performance .87
ETSI

---------------------- Page: 6 ----------------------

SIST EN 300 910 V8.3.1:2003
(GSM 05.05 version 8.3.1 Release 1999) 5 ETSI EN 300 910 V8.3.1 (2000-09)
F.3.5 VSWR .87
F.3.6 Stability .87
F.4 Guidelines (informative) .87
Annex G (normative): Calculation of Error Vector Magnitude .88
Annex H (normative): Requirements on Location Measurement Unit .89
H.1 TOA LMU Requirements.89
H.1.1 Void.89
H.1.2 LMU characteristics .89
H.1.2.1 Blocking characteristics.89
H.1.2.2 AM suppression characteristics .89
H.1.2.3 Intermodulation characteristics.90
H.1.2.4 Spurious emissions .90
H.1.3 Time-of-Arrival Measurement Performance .90
H.1.3.1 Sensitivity Performance.90
H.1.3.2 Interference Performance.91
H.1.3.3 Multipath Performance .92
H.1.4 Radio Interface Timing Measurement Performance.92
H.2 E-OTD LMU Requirements.92
H.2.1 LMU Characteristics .93
H.2.1.1 Blocking characteristics.93
H.2.1.2 AM suppression characteristics .93
H.2.1.3 Intermodulation characteristics.93
H.2.2 Sensitivity and Interference Performance.93
H.2.2.1 Sensitivity Performance.93
H.2.2.2 Interference Performance.94
H.2.2.3 Multipath Performance .95
Annex I (normative): E-OTD Mobile Station Requirements.96
I.1 Introduction .96
I.2 Sensitivity and Interference Performance .96
I.2.1 Sensitivity Performance .96
I.2.2 Interference Performance .97
I.2.3 Multipath Performance.97
Annex L (informative): Change control history .98
History .101
ETSI

---------------------- Page: 7 ----------------------

SIST EN 300 910 V8.3.1:2003
(GSM 05.05 version 8.3.1 Release 1999) 6 ETSI EN 300 910 V8.3.1 (2000-09)
Intellectual Property Rights
IPRs essential or potentially essential to the present document may have been declared to ETSI. The information
pertaining to these essential IPRs, if any, is publicly available for ETSI members and non-members, and can be found
in ETSI SR 000 314: "Intellectual Property Rights (IPRs); Essential, or potentially Essential, IPRs notified to ETSI in
respect of ETSI standards", which is available from the ETSI Secretariat. Latest updates are available on the ETSI Web
server (http://www.etsi.org/ipr).
Pursuant to the ETSI IPR Policy, no investigation, including IPR searches, has been carried out by ETSI. No guarantee
can be given as to the existence of other IPRs not referenced in ETSI SR 000 314 (or the updates on the ETSI Web
server) which are, or may be, or may become, essential to the present document.
Foreword
This European Standard (Telecommunications series) has been produced by ETSI Technical Committee Special Mobile
Group (SMG).
The present document defines the requirements for the transceiver of the digital mobile cellular and personal
communication systems operating in the 900 MHz (P-GSM, E-GSM and R-GSM) and 1 800 MHz band (GSM 900 and
DCS 1 800). It also includes specification information for mixed mode operation at 850 and 1900 MHz. (MXM 850 and
MXM 1900) 850 MHz and 1900 MHz mixed-mode is defined as a network that deploys both 30 kHz RF carriers and
200 kHz RF carriers in geographic regions where the Federal Communications Commission (FCC) regulations are
applied.
The contents of the present document may be subject to continuing work within SMG and may change following formal
SMG approval. Should SMG modify the contents of the present document it will then be re-submitted for formal
approval procedures by ETSI with an identifying change of release date and an increase in version number as follows:
Version 8.x.y
where:
8 GSM Phase 2+ Release 1999.
x the second digit is incremented for changes of substance, i.e. technical enhancements, corrections, updates,
etc.;
y the third digit is incremented when editorial only changes have been incorporated in the specification.
National transposition dates
Date of adoption of the present document: 25 August 2000
Date of latest announcement of the present document (doa): 30 November 2000
Date of latest publication of new National Standard
or endorsement of the present document (dop/e): 31 May 2001
Date of withdrawal of any conflicting National Standard (dow): 31 May 2001
ETSI

---------------------- Page: 8 ----------------------

SIST EN 300 910 V8.3.1:2003
(GSM 05.05 version 8.3.1 Release 1999) 7 ETSI EN 300 910 V8.3.1 (2000-09)
1 Scope
The present document defines the requirements for the transceiver of the pan-European digital cellular
telecommunications systems GSM.
Requirements are defined for two categories of parameters:
- Those that are required to provide compatibility between the radio channels, connected either to separate or
common antennas, that are used in the system. This category also includes parameters providing compatibility
with existing systems in the same or adjacent frequency bands.
- Those that define the transmission quality of the system.
The present document defines RF characteristics for the Mobile Station (MS) and Base Station System (BSS). The BSS
will contain either Base Transceiver Stations (BTS) or microcell base transceiver stations (micro-BTS). The precise
measurement methods are specified in GSM 11.10 and GSM 11.21.
Unless otherwise stated, the requirements defined in the present document apply to the full range of environmental
conditions specified for the equipment (see annex D).
The requirements for a MS in a mixed-mode system, MXM 850 and MXM 1900, corresponds to the requirements for
GSM 850 MS and PCS 1900 MS respectively.
In the present document some relaxation's are introduced for GSM 400 MSs, GSM 900 MSs and GSM 850 MSs which
fulfil the following conditions:
- pertain to power class 4 or 5 (see subclause 4.1.1);
- not designed to be vehicle mounted (see GSM 02.06);
- for mobile stations supporting 8-PSK, pertaining to power class E2 or E3.
In the present document these Mobile Stations are referred to as "small MS". For other mobile stations supporting 8-
PSK and pertaining to power class E2 or E3 the term "small MS" is applicable for receiver performance requirements
only (see clause 6).
NOTE: In the present document, a handheld which can be connected to a car kit is not considered to be vehicle
mounted.
MSs may operate on more than one of the frequency bands specified in clause 2. These MSs, defined in GSM 02.06, are
referred to as "Multi band MSs" in the present document. Multi band MSs shall meet all requirements for each of the
bands supported. The relaxation on GSM 400 MSs, GSM 900 MSs and GSM 850 MSs for a "small MS" are also valid
for a multi band MS if it complies with the definition of a small MS.
The RF characteristics of repeaters are defined in annex E of the present document. Annexes D and E are the only
clauses of the present document applicable to repeaters. Annex E does not apply to the MS or BSS.
ETSI

---------------------- Page: 9 ----------------------

SIST EN 300 910 V8.3.1:2003
(GSM 05.05 version 8.3.1 Release 1999) 8 ETSI EN 300 910 V8.3.1 (2000-09)
1.1 References
The following documents contain provisions which, through reference in this text, constitute provisions of the present
document.
• References are either specific (identified by date of publication, edition number, version number, etc.) or
non-specific.
• For a specific reference, subsequent revisions do not apply.
• For a non-specific reference, the latest version applies.
• A non-specific reference to an ETS shall also be taken to refer to later versions published as an EN with the same
number.
• For this Release 1999 document, references to GSM documents are for Release 1999 versions (version 8.x.y).
[1] GSM 01.04: "Digital cellular telecommunications system (Phase 2+); Abbreviations and
acronyms".
[2] GSM 02.06: "Digital cellular telecommunications sys
...