ETSI EN 302 077 V2.3.1 (2022-09)
Transmitting equipment for the Digital Audio Broadcasting (DAB) service; Harmonised Standard for access to radio spectrum
Transmitting equipment for the Digital Audio Broadcasting (DAB) service; Harmonised Standard for access to radio spectrum
REN/ERM-TG17-201
Oddajniška oprema za storitev digitalne zvokovne radiodifuzije (DAB) - Harmonizirani standard za dostop do radijskega spektra
Ta dokument določa tehnične lastnosti in metode merjenja za oddajniško opremo za zvokovne radiodifuzijske storitve, ki uporablja sistem modulacije digitalne zvokovne radiodifuzije (DAB) v pasu VHF III (od 174 MHz do 240 MHz). Prenose DAB licencirajo nacionalne uprave. Sklepni akti načrtovalskega sestanka CEPT T-DAB Constanţa, 2007 (WI95revCO07) [i.2] in sklepni akti regionalne radiokomunikacijske konference za načrtovanje storitve digitalne prizemne radiodifuzije v delih regij 1 in 3, v frekvenčnih območjih od 174 MHz do 230 MHz in od 470 MHz do 862 MHz (RRC-06) [i.3] zagotavljajo spektralne maske za zunajpasovne emisije pod različnimi pogoji. Te zahteve so v tem dokumentu predstavljene s štirimi primeri prenosa, glej preglednico 0. Pogoji dovoljenja, ki jih določi nacionalna uprava, določajo, kateri primer prenosa (zunajpasovna spektralna maska) se uporablja.
General Information
Buy Standard
Standards Content (Sample)
SLOVENSKI STANDARD
SIST EN 302 077 V2.3.1:2022
01-november-2022
Oddajniška oprema za storitev digitalne zvokovne radiodifuzije (DAB) -
Harmonizirani standard za dostop do radijskega spektra
Transmitting equipment for the Digital Audio Broadcasting (DAB) service - Harmonised
Standard for access to radio spectrum
Ta slovenski standard je istoveten z: ETSI EN 302 077 V2.3.1 (2022-09)
ICS:
33.060.20 Sprejemna in oddajna Receiving and transmitting
oprema equipment
33.170 Televizijska in radijska Television and radio
difuzija broadcasting
SIST EN 302 077 V2.3.1:2022 en
2003-01.Slovenski inštitut za standardizacijo. Razmnoževanje celote ali delov tega standarda ni dovoljeno.
---------------------- Page: 1 ----------------------
SIST EN 302 077 V2.3.1:2022
---------------------- Page: 2 ----------------------
SIST EN 302 077 V2.3.1:2022
ETSI EN 302 077 V2.3.1 (2022-09)
HARMONISED EUROPEAN STANDARD
Transmitting equipment for the
Digital Audio Broadcasting (DAB) service;
Harmonised Standard for access to radio spectrum
---------------------- Page: 3 ----------------------
SIST EN 302 077 V2.3.1:2022
2 ETSI EN 302 077 V2.3.1 (2022-09)
Reference
REN/ERM-TG17-201
Keywords
audio, broadcasting, DAB, digital,
harmonised standard, radio, regulation
ETSI
650 Route des Lucioles
F-06921 Sophia Antipolis Cedex - FRANCE
Tel.: +33 4 92 94 42 00 Fax: +33 4 93 65 47 16
Siret N° 348 623 562 00017 - APE 7112B
Association à but non lucratif enregistrée à la
Sous-Préfecture de Grasse (06) N° w061004871
Important notice
The present document can be downloaded from:
http://www.etsi.org/standards-search
The present document may be made available in electronic versions and/or in print. The content of any electronic and/or
print versions of the present document shall not be modified without the prior written authorization of ETSI. In case of any
existing or perceived difference in contents between such versions and/or in print, the prevailing version of an ETSI
deliverable is the one made publicly available in PDF format at www.etsi.org/deliver.
Users of the present document should be aware that the document may be subject to revision or change of status.
Information on the current status of this and other ETSI documents is available at
https://portal.etsi.org/TB/ETSIDeliverableStatus.aspx
If you find errors in the present document, please send your comment to one of the following services:
https://portal.etsi.org/People/CommiteeSupportStaff.aspx
If you find a security vulnerability in the present document, please report it through our
Coordinated Vulnerability Disclosure Program:
https://www.etsi.org/standards/coordinated-vulnerability-disclosure
Notice of disclaimer & limitation of liability
The information provided in the present deliverable is directed solely to professionals who have the appropriate degree of
experience to understand and interpret its content in accordance with generally accepted engineering or
other professional standard and applicable regulations.
No recommendation as to products and services or vendors is made or should be implied.
In no event shall ETSI be held liable for loss of profits or any other incidental or consequential damages.
Any software contained in this deliverable is provided "AS IS" with no warranties, express or implied, including but not
limited to, the warranties of merchantability, fitness for a particular purpose and non-infringement of intellectual property
rights and ETSI shall not be held liable in any event for any damages whatsoever (including, without limitation, damages
for loss of profits, business interruption, loss of information, or any other pecuniary loss) arising out of or related to the use
of or inability to use the software.
Copyright Notification
No part may be reproduced or utilized in any form or by any means, electronic or mechanical, including photocopying and
microfilm except as authorized by written permission of ETSI.
The content of the PDF version shall not be modified without the written authorization of ETSI.
The copyright and the foregoing restriction extend to reproduction in all media.
© ETSI 2022.
All rights reserved.
ETSI
---------------------- Page: 4 ----------------------
SIST EN 302 077 V2.3.1:2022
3 ETSI EN 302 077 V2.3.1 (2022-09)
Contents
Intellectual Property Rights . 6
Foreword . 6
Modal verbs terminology . 7
1 Scope . 8
2 References . 8
2.1 Normative references . 8
2.2 Informative references . 9
3 Definition of terms, symbols and abbreviations . 9
3.1 Terms . 9
3.2 Symbols . 10
3.3 Abbreviations . 10
4 Technical requirements specifications . 11
4.1 Environmental profile . 11
4.2 Conformance requirements . 11
4.2.1 Rated output power . 11
4.2.1.1 Definition . 11
4.2.1.2 Limit . 11
4.2.1.3 Conformance . 11
4.2.2 Frequency stability . 12
4.2.2.1 Definition . 12
4.2.2.2 Limit . 12
4.2.2.3 Conformance . 12
4.2.3 Crest factor. 12
4.2.3.1 Definition . 12
4.2.3.2 Limit . 12
4.2.3.3 Conformance . 12
4.2.4 Spurious emissions . 12
4.2.4.1 Definition . 12
4.2.4.2 Limits . 12
4.2.4.3 Conformance . 13
4.2.5 Out-of-band emissions . 13
4.2.5.1 Definition . 13
4.2.5.2 Limit . 14
4.2.5.3 Conformance . 16
4.2.6 MCOFDM systems: ACLR performance . 17
4.2.6.1 Definition . 17
4.2.6.2 Limit . 17
4.2.6.3 Conformance . 17
4.2.7 MCOFDM systems: MER performance . 17
4.2.7.1 Definition . 17
4.2.7.2 Limit . 17
4.2.7.3 Conformance . 17
4.2.8 Behaviour in case of erroneous ETI signal . 17
4.2.8.1 Definition . 17
4.2.8.2 Limit . 17
4.2.8.3 Conformance . 18
4.2.9 BER-Performance degradation . 18
4.2.9.1 Definition . 18
4.2.9.2 Limit . 18
4.2.9.3 Conformance . 18
5 Testing for compliance with technical requirements . 18
5.1 Environmental conditions for testing . 18
5.2 Test modulating signal . 19
5.3 Methods of measurement . 19
ETSI
---------------------- Page: 5 ----------------------
SIST EN 302 077 V2.3.1:2022
4 ETSI EN 302 077 V2.3.1 (2022-09)
5.3.1 Rated output power . 19
5.3.1.1 Initial conditions . 19
5.3.1.2 Procedure . 19
5.3.1.3 Test requirements . 19
5.3.2 Frequency stability . 19
5.3.2.1 Initial conditions . 19
5.3.2.2 Procedure . 20
5.3.2.3 Test requirements . 20
5.3.3 Crest factor. 20
5.3.3.1 Initial conditions . 20
5.3.3.2 Procedure . 20
5.3.3.3 Test requirements . 20
5.3.4 Spurious emissions . 20
5.3.4.1 Initial conditions . 20
5.3.4.2 Procedure . 21
5.3.4.3 Test requirements . 21
5.3.5 Out-of-band emissions . 21
5.3.5.1 Initial conditions . 21
5.3.5.2 Procedure . 21
5.3.5.3 Test requirements . 21
5.3.6 MCOFDM systems: ACLR . 21
5.3.6.1 Initial conditions . 21
5.3.6.2 Procedure . 21
5.3.6.3 Test requirements . 22
5.3.7 MCOFDM systems: MER . 22
5.3.7.1 Initial conditions . 22
5.3.7.2 Procedure . 22
5.3.7.3 Test requirements . 22
5.3.8 Behaviour in case of erroneous ETI signal . 22
5.3.8.1 Initial conditions . 22
5.3.8.2 Procedure . 22
5.3.8.3 Test requirements . 23
5.3.9 BER-Performance degradation . 23
5.3.9.1 Initial conditions . 23
5.3.9.2 Procedure . 23
5.3.9.3 Test requirements . 23
Annex A (informative): Relationship between the present document and the essential
requirements of Directive 2014/53/EU . 24
Annex B (normative): Measuring arrangements . 25
B.1 Testing arrangements for antenna port measurements . 25
B.1.1 Antenna port measurements . 25
B.1.2 Out-of-band emissions . 26
B.1.3 MCOFDM: ACLR and MER performance . 26
Annex C (normative): COFDM measuring arrangements . 27
C.1 ETI errors . 27
C.2 Bit Error performance measurement . 27
Annex D (informative): Practical measurement of spurious domain emissions . 28
D.1 Introduction . 28
D.2 Directional coupler issues . 28
Annex E (informative): Spectrum measurements . 29
Annex F (informative): MCOFDM systems . 30
F.1 Introduction . 30
ETSI
---------------------- Page: 6 ----------------------
SIST EN 302 077 V2.3.1:2022
5 ETSI EN 302 077 V2.3.1 (2022-09)
F.2 Architecture . 31
Annex G (informative): Maximum measurement uncertainty . 33
Annex H (informative): Change history . 34
History . 35
ETSI
---------------------- Page: 7 ----------------------
SIST EN 302 077 V2.3.1:2022
6 ETSI EN 302 077 V2.3.1 (2022-09)
Intellectual Property Rights
Essential patents
IPRs essential or potentially essential to normative deliverables may have been declared to ETSI. The declarations
pertaining to these essential IPRs, if any, are publicly available for ETSI members and non-members, and can be
found in ETSI SR 000 314: "Intellectual Property Rights (IPRs); Essential, or potentially Essential, IPRs notified to
ETSI in respect of ETSI standards", which is available from the ETSI Secretariat. Latest updates are available on the
ETSI Web server (https://ipr.etsi.org/).
Pursuant to the ETSI Directives including the ETSI IPR Policy, no investigation regarding the essentiality of IPRs,
including IPR searches, has been carried out by ETSI. No guarantee can be given as to the existence of other IPRs not
referenced in ETSI SR 000 314 (or the updates on the ETSI Web server) which are, or may be, or may become,
essential to the present document.
Trademarks
The present document may include trademarks and/or tradenames which are asserted and/or registered by their owners.
ETSI claims no ownership of these except for any which are indicated as being the property of ETSI, and conveys no
right to use or reproduce any trademark and/or tradename. Mention of those trademarks in the present document does
not constitute an endorsement by ETSI of products, services or organizations associated with those trademarks.
DECT™, PLUGTESTS™, UMTS™ and the ETSI logo are trademarks of ETSI registered for the benefit of its
Members. 3GPP™ and LTE™ are trademarks of ETSI registered for the benefit of its Members and of the 3GPP
Organizational Partners. oneM2M™ logo is a trademark of ETSI registered for the benefit of its Members and of the
®
oneM2M Partners. GSM and the GSM logo are trademarks registered and owned by the GSM Association.
Foreword
This Harmonised European Standard (EN) has been produced by ETSI Technical Committee Electromagnetic
compatibility and Radio spectrum Matters (ERM).
The present document has been prepared under the Commission's standardisation request C(2015) 5376 final [i.4] to
provide one voluntary means of conforming to the essential requirements of Directive 2014/53/EU on the harmonisation
of the laws of the Member States relating to the making available on the market of radio equipment and repealing
Directive 1999/5/EC [i.1].
Once the present document is cited in the Official Journal of the European Union under that Directive, compliance with
the normative clauses of the present document given in table A.1 confers, within the limits of the scope of the present
document, a presumption of conformity with the corresponding essential requirements of that Directive and associated
EFTA regulations.
National transposition dates
Date of adoption of this EN: 30 August 2022
Date of latest announcement of this EN (doa): 30 November 2022
Date of latest publication of new National Standard
or endorsement of this EN (dop/e): 31 May 2023
Date of withdrawal of any conflicting National Standard (dow): 31 May 2024
ETSI
---------------------- Page: 8 ----------------------
SIST EN 302 077 V2.3.1:2022
7 ETSI EN 302 077 V2.3.1 (2022-09)
Modal verbs terminology
In the present document "shall", "shall not", "should", "should not", "may", "need not", "will", "will not", "can" and
"cannot" are to be interpreted as described in clause 3.2 of the ETSI Drafting Rules (Verbal forms for the expression of
provisions).
"must" and "must not" are NOT allowed in ETSI deliverables except when used in direct citation.
ETSI
---------------------- Page: 9 ----------------------
SIST EN 302 077 V2.3.1:2022
8 ETSI EN 302 077 V2.3.1 (2022-09)
1 Scope
The present document specifies technical characteristics and methods of measurements for transmitting equipment for
broadcast sound services using the Digital Audio Broadcast (DAB) modulation system operating in VHF band III
(174 MHz to 240 MHz).
DAB transmissions are licensed by national administrations. The Final Acts of the CEPT T-DAB Planning Meeting
Constanţa, 2007 (WI95revCO07) [i.2] and the Final Acts of the Regional Radiocommunication Conference for planning
of the digital terrestrial broadcasting service in parts of Regions 1 and 3, in the frequency bands 174 MHz to 230 MHz
and 470 MHz to 862 MHz (RRC-06) [i.3] provide spectrum masks for Out-of-Band emissions under different
conditions. These requirements are represented by four transmission cases in the present document, see table 0. The
license conditions set by the national administration stipulate which transmission case (Out-of-Band spectrum mask)
applies.
Table 0: Transmission cases
Case Description Identification in Identification in RRC-06
WI95revCO07
1 Applicable to DAB transmissions operating in areas 1: critical 2: sensitive
critical for adjacent channel DAB to DAB interference,
and in any case when it is necessary to protect other
services operating on adjacent frequencies on a primary
basis
2 Applicable to DAB transmissions when no other case 2: non-critical 1: non-critical
applies
3 Applicable to DAB transmitters in exceptional Critical case considering
circumstances to protect safety services protection of distress
and safety frequencies
4 Applicable to DAB transmissions operating on a 3: sensitive in certain
case-by-case basis in certain areas areas where channel 12D
is in use
NOTE: The relationship between the present document and essential requirements of article 3.2 of
Directive 2014/53/EU [i.1] is given in annex A.
2 References
2.1 Normative references
References are either specific (identified by date of publication and/or edition number or version number) or
non-specific. For specific references, only the cited version applies. For non-specific references, the latest version of the
referenced document (including any amendments) applies.
Referenced documents which are not found to be publicly available in the expected location might be found at
https://docbox.etsi.org/Reference/.
NOTE: While any hyperlinks included in this clause were valid at the time of publication, ETSI cannot guarantee
their long term validity.
The following referenced documents are necessary for the application of the present document.
[1] ETSI EN 300 401 (V2.1.1) (01-2017): "Radio broadcasting systems; Digital Audio Broadcasting
(DAB) to mobile, portable and fixed receivers".
[2] ETSI ETS 300 799 (Edition 1) (09-1997): "Digital Audio Broadcasting (DAB); Distribution
interfaces; Ensemble Transport Interface (ETI)".
ETSI
---------------------- Page: 10 ----------------------
SIST EN 302 077 V2.3.1:2022
9 ETSI EN 302 077 V2.3.1 (2022-09)
2.2 Informative references
References are either specific (identified by date of publication and/or edition number or version number) or
non-specific. For specific references, only the cited version applies. For non-specific references, the latest version of the
referenced document (including any amendments) applies.
NOTE: While any hyperlinks included in this clause were valid at the time of publication, ETSI cannot guarantee
their long term validity.
The following referenced documents are not necessary for the application of the present document but they assist the
user with regard to a particular subject area.
[i.1] Directive 2014/53/EU of the European Parliament and of the Council of 16 April 2014 on the
harmonisation of the laws of the Member States relating to the making available on the market of
radio equipment and repealing Directive 1999/5/EC.
[i.2] Final Acts of the CEPT T-DAB Planning Meeting Constanţa, 2007 (WI95revCO07).
[i.3] Final Acts of the Regional Radiocommunication Conference for planning of the digital terrestrial
broadcasting service in parts of Regions 1 and 3, i
...
ETSI EN 302 077 V2.3.1 (2022-09)
HARMONISED EUROPEAN STANDARD
Transmitting equipment for the
Digital Audio Broadcasting (DAB) service;
Harmonised Standard for access to radio spectrum
---------------------- Page: 1 ----------------------
2 ETSI EN 302 077 V2.3.1 (2022-09)
Reference
REN/ERM-TG17-201
Keywords
audio, broadcasting, DAB, digital,
harmonised standard, radio, regulation
ETSI
650 Route des Lucioles
F-06921 Sophia Antipolis Cedex - FRANCE
Tel.: +33 4 92 94 42 00 Fax: +33 4 93 65 47 16
Siret N° 348 623 562 00017 - APE 7112B
Association à but non lucratif enregistrée à la
Sous-Préfecture de Grasse (06) N° w061004871
Important notice
The present document can be downloaded from:
http://www.etsi.org/standards-search
The present document may be made available in electronic versions and/or in print. The content of any electronic and/or
print versions of the present document shall not be modified without the prior written authorization of ETSI. In case of any
existing or perceived difference in contents between such versions and/or in print, the prevailing version of an ETSI
deliverable is the one made publicly available in PDF format at www.etsi.org/deliver.
Users of the present document should be aware that the document may be subject to revision or change of status.
Information on the current status of this and other ETSI documents is available at
https://portal.etsi.org/TB/ETSIDeliverableStatus.aspx
If you find errors in the present document, please send your comment to one of the following services:
https://portal.etsi.org/People/CommiteeSupportStaff.aspx
If you find a security vulnerability in the present document, please report it through our
Coordinated Vulnerability Disclosure Program:
https://www.etsi.org/standards/coordinated-vulnerability-disclosure
Notice of disclaimer & limitation of liability
The information provided in the present deliverable is directed solely to professionals who have the appropriate degree of
experience to understand and interpret its content in accordance with generally accepted engineering or
other professional standard and applicable regulations.
No recommendation as to products and services or vendors is made or should be implied.
In no event shall ETSI be held liable for loss of profits or any other incidental or consequential damages.
Any software contained in this deliverable is provided "AS IS" with no warranties, express or implied, including but not
limited to, the warranties of merchantability, fitness for a particular purpose and non-infringement of intellectual property
rights and ETSI shall not be held liable in any event for any damages whatsoever (including, without limitation, damages
for loss of profits, business interruption, loss of information, or any other pecuniary loss) arising out of or related to the use
of or inability to use the software.
Copyright Notification
No part may be reproduced or utilized in any form or by any means, electronic or mechanical, including photocopying and
microfilm except as authorized by written permission of ETSI.
The content of the PDF version shall not be modified without the written authorization of ETSI.
The copyright and the foregoing restriction extend to reproduction in all media.
© ETSI 2022.
All rights reserved.
ETSI
---------------------- Page: 2 ----------------------
3 ETSI EN 302 077 V2.3.1 (2022-09)
Contents
Intellectual Property Rights . 6
Foreword . 6
Modal verbs terminology . 7
1 Scope . 8
2 References . 8
2.1 Normative references . 8
2.2 Informative references . 9
3 Definition of terms, symbols and abbreviations . 9
3.1 Terms . 9
3.2 Symbols . 10
3.3 Abbreviations . 10
4 Technical requirements specifications . 11
4.1 Environmental profile . 11
4.2 Conformance requirements . 11
4.2.1 Rated output power . 11
4.2.1.1 Definition . 11
4.2.1.2 Limit . 11
4.2.1.3 Conformance . 11
4.2.2 Frequency stability . 12
4.2.2.1 Definition . 12
4.2.2.2 Limit . 12
4.2.2.3 Conformance . 12
4.2.3 Crest factor. 12
4.2.3.1 Definition . 12
4.2.3.2 Limit . 12
4.2.3.3 Conformance . 12
4.2.4 Spurious emissions . 12
4.2.4.1 Definition . 12
4.2.4.2 Limits . 12
4.2.4.3 Conformance . 13
4.2.5 Out-of-band emissions . 13
4.2.5.1 Definition . 13
4.2.5.2 Limit . 14
4.2.5.3 Conformance . 16
4.2.6 MCOFDM systems: ACLR performance . 17
4.2.6.1 Definition . 17
4.2.6.2 Limit . 17
4.2.6.3 Conformance . 17
4.2.7 MCOFDM systems: MER performance . 17
4.2.7.1 Definition . 17
4.2.7.2 Limit . 17
4.2.7.3 Conformance . 17
4.2.8 Behaviour in case of erroneous ETI signal . 17
4.2.8.1 Definition . 17
4.2.8.2 Limit . 17
4.2.8.3 Conformance . 18
4.2.9 BER-Performance degradation . 18
4.2.9.1 Definition . 18
4.2.9.2 Limit . 18
4.2.9.3 Conformance . 18
5 Testing for compliance with technical requirements . 18
5.1 Environmental conditions for testing . 18
5.2 Test modulating signal . 19
5.3 Methods of measurement . 19
ETSI
---------------------- Page: 3 ----------------------
4 ETSI EN 302 077 V2.3.1 (2022-09)
5.3.1 Rated output power . 19
5.3.1.1 Initial conditions . 19
5.3.1.2 Procedure . 19
5.3.1.3 Test requirements . 19
5.3.2 Frequency stability . 19
5.3.2.1 Initial conditions . 19
5.3.2.2 Procedure . 20
5.3.2.3 Test requirements . 20
5.3.3 Crest factor. 20
5.3.3.1 Initial conditions . 20
5.3.3.2 Procedure . 20
5.3.3.3 Test requirements . 20
5.3.4 Spurious emissions . 20
5.3.4.1 Initial conditions . 20
5.3.4.2 Procedure . 21
5.3.4.3 Test requirements . 21
5.3.5 Out-of-band emissions . 21
5.3.5.1 Initial conditions . 21
5.3.5.2 Procedure . 21
5.3.5.3 Test requirements . 21
5.3.6 MCOFDM systems: ACLR . 21
5.3.6.1 Initial conditions . 21
5.3.6.2 Procedure . 21
5.3.6.3 Test requirements . 22
5.3.7 MCOFDM systems: MER . 22
5.3.7.1 Initial conditions . 22
5.3.7.2 Procedure . 22
5.3.7.3 Test requirements . 22
5.3.8 Behaviour in case of erroneous ETI signal . 22
5.3.8.1 Initial conditions . 22
5.3.8.2 Procedure . 22
5.3.8.3 Test requirements . 23
5.3.9 BER-Performance degradation . 23
5.3.9.1 Initial conditions . 23
5.3.9.2 Procedure . 23
5.3.9.3 Test requirements . 23
Annex A (informative): Relationship between the present document and the essential
requirements of Directive 2014/53/EU . 24
Annex B (normative): Measuring arrangements . 25
B.1 Testing arrangements for antenna port measurements . 25
B.1.1 Antenna port measurements . 25
B.1.2 Out-of-band emissions . 26
B.1.3 MCOFDM: ACLR and MER performance . 26
Annex C (normative): COFDM measuring arrangements . 27
C.1 ETI errors . 27
C.2 Bit Error performance measurement . 27
Annex D (informative): Practical measurement of spurious domain emissions . 28
D.1 Introduction . 28
D.2 Directional coupler issues . 28
Annex E (informative): Spectrum measurements . 29
Annex F (informative): MCOFDM systems . 30
F.1 Introduction . 30
ETSI
---------------------- Page: 4 ----------------------
5 ETSI EN 302 077 V2.3.1 (2022-09)
F.2 Architecture . 31
Annex G (informative): Maximum measurement uncertainty . 33
Annex H (informative): Change history . 34
History . 35
ETSI
---------------------- Page: 5 ----------------------
6 ETSI EN 302 077 V2.3.1 (2022-09)
Intellectual Property Rights
Essential patents
IPRs essential or potentially essential to normative deliverables may have been declared to ETSI. The declarations
pertaining to these essential IPRs, if any, are publicly available for ETSI members and non-members, and can be
found in ETSI SR 000 314: "Intellectual Property Rights (IPRs); Essential, or potentially Essential, IPRs notified to
ETSI in respect of ETSI standards", which is available from the ETSI Secretariat. Latest updates are available on the
ETSI Web server (https://ipr.etsi.org/).
Pursuant to the ETSI Directives including the ETSI IPR Policy, no investigation regarding the essentiality of IPRs,
including IPR searches, has been carried out by ETSI. No guarantee can be given as to the existence of other IPRs not
referenced in ETSI SR 000 314 (or the updates on the ETSI Web server) which are, or may be, or may become,
essential to the present document.
Trademarks
The present document may include trademarks and/or tradenames which are asserted and/or registered by their owners.
ETSI claims no ownership of these except for any which are indicated as being the property of ETSI, and conveys no
right to use or reproduce any trademark and/or tradename. Mention of those trademarks in the present document does
not constitute an endorsement by ETSI of products, services or organizations associated with those trademarks.
DECT™, PLUGTESTS™, UMTS™ and the ETSI logo are trademarks of ETSI registered for the benefit of its
Members. 3GPP™ and LTE™ are trademarks of ETSI registered for the benefit of its Members and of the 3GPP
Organizational Partners. oneM2M™ logo is a trademark of ETSI registered for the benefit of its Members and of the
®
oneM2M Partners. GSM and the GSM logo are trademarks registered and owned by the GSM Association.
Foreword
This Harmonised European Standard (EN) has been produced by ETSI Technical Committee Electromagnetic
compatibility and Radio spectrum Matters (ERM).
The present document has been prepared under the Commission's standardisation request C(2015) 5376 final [i.4] to
provide one voluntary means of conforming to the essential requirements of Directive 2014/53/EU on the harmonisation
of the laws of the Member States relating to the making available on the market of radio equipment and repealing
Directive 1999/5/EC [i.1].
Once the present document is cited in the Official Journal of the European Union under that Directive, compliance with
the normative clauses of the present document given in table A.1 confers, within the limits of the scope of the present
document, a presumption of conformity with the corresponding essential requirements of that Directive and associated
EFTA regulations.
National transposition dates
Date of adoption of this EN: 30 August 2022
Date of latest announcement of this EN (doa): 30 November 2022
Date of latest publication of new National Standard
or endorsement of this EN (dop/e): 31 May 2023
Date of withdrawal of any conflicting National Standard (dow): 31 May 2024
ETSI
---------------------- Page: 6 ----------------------
7 ETSI EN 302 077 V2.3.1 (2022-09)
Modal verbs terminology
In the present document "shall", "shall not", "should", "should not", "may", "need not", "will", "will not", "can" and
"cannot" are to be interpreted as described in clause 3.2 of the ETSI Drafting Rules (Verbal forms for the expression of
provisions).
"must" and "must not" are NOT allowed in ETSI deliverables except when used in direct citation.
ETSI
---------------------- Page: 7 ----------------------
8 ETSI EN 302 077 V2.3.1 (2022-09)
1 Scope
The present document specifies technical characteristics and methods of measurements for transmitting equipment for
broadcast sound services using the Digital Audio Broadcast (DAB) modulation system operating in VHF band III
(174 MHz to 240 MHz).
DAB transmissions are licensed by national administrations. The Final Acts of the CEPT T-DAB Planning Meeting
Constanţa, 2007 (WI95revCO07) [i.2] and the Final Acts of the Regional Radiocommunication Conference for planning
of the digital terrestrial broadcasting service in parts of Regions 1 and 3, in the frequency bands 174 MHz to 230 MHz
and 470 MHz to 862 MHz (RRC-06) [i.3] provide spectrum masks for Out-of-Band emissions under different
conditions. These requirements are represented by four transmission cases in the present document, see table 0. The
license conditions set by the national administration stipulate which transmission case (Out-of-Band spectrum mask)
applies.
Table 0: Transmission cases
Case Description Identification in Identification in RRC-06
WI95revCO07
1 Applicable to DAB transmissions operating in areas 1: critical 2: sensitive
critical for adjacent channel DAB to DAB interference,
and in any case when it is necessary to protect other
services operating on adjacent frequencies on a primary
basis
2 Applicable to DAB transmissions when no other case 2: non-critical 1: non-critical
applies
3 Applicable to DAB transmitters in exceptional Critical case considering
circumstances to protect safety services protection of distress
and safety frequencies
4 Applicable to DAB transmissions operating on a 3: sensitive in certain
case-by-case basis in certain areas areas where channel 12D
is in use
NOTE: The relationship between the present document and essential requirements of article 3.2 of
Directive 2014/53/EU [i.1] is given in annex A.
2 References
2.1 Normative references
References are either specific (identified by date of publication and/or edition number or version number) or
non-specific. For specific references, only the cited version applies. For non-specific references, the latest version of the
referenced document (including any amendments) applies.
Referenced documents which are not found to be publicly available in the expected location might be found at
https://docbox.etsi.org/Reference/.
NOTE: While any hyperlinks included in this clause were valid at the time of publication, ETSI cannot guarantee
their long term validity.
The following referenced documents are necessary for the application of the present document.
[1] ETSI EN 300 401 (V2.1.1) (01-2017): "Radio broadcasting systems; Digital Audio Broadcasting
(DAB) to mobile, portable and fixed receivers".
[2] ETSI ETS 300 799 (Edition 1) (09-1997): "Digital Audio Broadcasting (DAB); Distribution
interfaces; Ensemble Transport Interface (ETI)".
ETSI
---------------------- Page: 8 ----------------------
9 ETSI EN 302 077 V2.3.1 (2022-09)
2.2 Informative references
References are either specific (identified by date of publication and/or edition number or version number) or
non-specific. For specific references, only the cited version applies. For non-specific references, the latest version of the
referenced document (including any amendments) applies.
NOTE: While any hyperlinks included in this clause were valid at the time of publication, ETSI cannot guarantee
their long term validity.
The following referenced documents are not necessary for the application of the present document but they assist the
user with regard to a particular subject area.
[i.1] Directive 2014/53/EU of the European Parliament and of the Council of 16 April 2014 on the
harmonisation of the laws of the Member States relating to the making available on the market of
radio equipment and repealing Directive 1999/5/EC.
[i.2] Final Acts of the CEPT T-DAB Planning Meeting Constanţa, 2007 (WI95revCO07).
[i.3] Final Acts of the Regional Radiocommunication Conference for planning of the digital terrestrial
broadcasting service in parts of Regions 1 and 3, in the frequency bands 174-230 MHz and
470-862 MHz (RRC-06).
[i.4] Commission Implementing Decision C(2015) 5376 final of 4.8.2015 on a standardisation request
to the European Committee for Electrotechnical Standardisation and to the European
Telecommunications Standards Institute as regards radio equipment in support of Directive
2014/53/EU of the European Parliament and of the Council.
3 Definition of terms, symbols and abbreviations
3.1 Terms
For the purposes of the present document, the terms given in Directive 2014/53/EU [i.1] and the following apply:
Adjacent Channel Leakage Ratio (ACLR): ratio of the mean power of the DAB signal in the OFDM block at f to
L
the mean power of the unoccupied OFDM block within the MCOFDM group
antenna port: port of an apparatus which is designed, in normal operation, to be connected to an antenna using coaxial
cable
broadcasting service: radiocommunication service in which the transmissions are intended for direct reception by the
general public
NOTE: This service may include sound transmissions, television transmissions or other types o
...
Final draft ETSI EN 302 077 V2.3.0 (2022-07)
HARMONISED EUROPEAN STANDARD
Transmitting equipment for the
Digital Audio Broadcasting (DAB) service;
Harmonised Standard for access to radio spectrum
---------------------- Page: 1 ----------------------
2 Final draft ETSI EN 302 077 V2.3.0 (2022-07)
Reference
REN/ERM-TG17-201
Keywords
audio, broadcasting, DAB, digital, harmonised
standard, radio, regulation
ETSI
650 Route des Lucioles
F-06921 Sophia Antipolis Cedex - FRANCE
Tel.: +33 4 92 94 42 00 Fax: +33 4 93 65 47 16
Siret N° 348 623 562 00017 - APE 7112B
Association à but non lucratif enregistrée à la
Sous-Préfecture de Grasse (06) N° w061004871
Important notice
The present document can be downloaded from:
http://www.etsi.org/standards-search
The present document may be made available in electronic versions and/or in print. The content of any electronic and/or
print versions of the present document shall not be modified without the prior written authorization of ETSI. In case of any
existing or perceived difference in contents between such versions and/or in print, the prevailing version of an ETSI
deliverable is the one made publicly available in PDF format at www.etsi.org/deliver.
Users of the present document should be aware that the document may be subject to revision or change of status.
Information on the current status of this and other ETSI documents is available at
https://portal.etsi.org/TB/ETSIDeliverableStatus.aspx
If you find errors in the present document, please send your comment to one of the following services:
https://portal.etsi.org/People/CommiteeSupportStaff.aspx
If you find a security vulnerability in the present document, please report it through our
Coordinated Vulnerability Disclosure Program:
https://www.etsi.org/standards/coordinated-vulnerability-disclosure
Notice of disclaimer & limitation of liability
The information provided in the present deliverable is directed solely to professionals who have the appropriate degree of
experience to understand and interpret its content in accordance with generally accepted engineering or
other professional standard and applicable regulations.
No recommendation as to products and services or vendors is made or should be implied.
In no event shall ETSI be held liable for loss of profits or any other incidental or consequential damages.
Any software contained in this deliverable is provided "AS IS" with no warranties, express or implied, including but not
limited to, the warranties of merchantability, fitness for a particular purpose and non-infringement of intellectual property
rights and ETSI shall not be held liable in any event for any damages whatsoever (including, without limitation, damages
for loss of profits, business interruption, loss of information, or any other pecuniary loss) arising out of or related to the use
of or inability to use the software.
Copyright Notification
No part may be reproduced or utilized in any form or by any means, electronic or mechanical, including photocopying and
microfilm except as authorized by written permission of ETSI.
The content of the PDF version shall not be modified without the written authorization of ETSI.
The copyright and the foregoing restriction extend to reproduction in all media.
© ETSI 2022.
All rights reserved.
ETSI
---------------------- Page: 2 ----------------------
3 Final draft ETSI EN 302 077 V2.3.0 (2022-07)
Contents
Intellectual Property Rights . 6
Foreword . 6
Modal verbs terminology . 7
1 Scope . 8
2 References . 8
2.1 Normative references . 8
2.2 Informative references . 9
3 Definition of terms, symbols and abbreviations . 9
3.1 Terms . 9
3.2 Symbols . 10
3.3 Abbreviations . 10
4 Technical requirements specifications . 11
4.1 Environmental profile . 11
4.2 Conformance requirements . 11
4.2.1 Rated output power . 11
4.2.1.1 Definition . 11
4.2.1.2 Limit . 11
4.2.1.3 Conformance . 11
4.2.2 Frequency stability . 12
4.2.2.1 Definition . 12
4.2.2.2 Limit . 12
4.2.2.3 Conformance . 12
4.2.3 Crest factor. 12
4.2.3.1 Definition . 12
4.2.3.2 Limit . 12
4.2.3.3 Conformance . 12
4.2.4 Spurious emissions . 12
4.2.4.1 Definition . 12
4.2.4.2 Limits . 12
4.2.4.3 Conformance . 13
4.2.5 Out-of-band emissions . 13
4.2.5.1 Definition . 13
4.2.5.2 Limit . 14
4.2.5.3 Conformance . 16
4.2.6 MCOFDM systems: ACLR performance . 17
4.2.6.1 Definition . 17
4.2.6.2 Limit . 17
4.2.6.3 Conformance . 17
4.2.7 MCOFDM systems: MER performance . 17
4.2.7.1 Definition . 17
4.2.7.2 Limit . 17
4.2.7.3 Conformance . 17
4.2.8 Behaviour in case of erroneous ETI signal . 17
4.2.8.1 Definition . 17
4.2.8.2 Limit . 17
4.2.8.3 Conformance . 18
4.2.9 BER-Performance degradation . 18
4.2.9.1 Definition . 18
4.2.9.2 Limit . 18
4.2.9.3 Conformance . 18
5 Testing for compliance with technical requirements . 18
5.1 Environmental conditions for testing . 18
5.2 Test modulating signal . 19
5.3 Methods of measurement . 19
ETSI
---------------------- Page: 3 ----------------------
4 Final draft ETSI EN 302 077 V2.3.0 (2022-07)
5.3.1 Rated output power . 19
5.3.1.1 Initial conditions . 19
5.3.1.2 Procedure . 19
5.3.1.3 Test requirements . 19
5.3.2 Frequency stability . 19
5.3.2.1 Initial conditions . 19
5.3.2.2 Procedure . 20
5.3.2.3 Test requirements . 20
5.3.3 Crest factor. 20
5.3.3.1 Initial conditions . 20
5.3.3.2 Procedure . 20
5.3.3.3 Test requirements . 20
5.3.4 Spurious emissions . 20
5.3.4.1 Initial conditions . 20
5.3.4.2 Procedure . 21
5.3.4.3 Test requirements . 21
5.3.5 Out-of-band emissions . 21
5.3.5.1 Initial conditions . 21
5.3.5.2 Procedure . 21
5.3.5.3 Test requirements . 21
5.3.6 MCOFDM systems: ACLR . 21
5.3.6.1 Initial conditions . 21
5.3.6.2 Procedure . 21
5.3.6.3 Test requirements . 22
5.3.7 MCOFDM systems: MER . 22
5.3.7.1 Initial conditions . 22
5.3.7.2 Procedure . 22
5.3.7.3 Test requirements . 22
5.3.8 Behaviour in case of erroneous ETI signal . 22
5.3.8.1 Initial conditions . 22
5.3.8.2 Procedure . 22
5.3.8.3 Test requirements . 23
5.3.9 BER-Performance degradation . 23
5.3.9.1 Initial conditions . 23
5.3.9.2 Procedure . 23
5.3.9.3 Test requirements . 23
Annex A (informative): Relationship between the present document and the essential
requirements of Directive 2014/53/EU . 24
Annex B (normative): Measuring arrangements . 25
B.1 Testing arrangements for antenna port measurements . 25
B.1.1 Antenna port measurements . 25
B.1.2 Out-of-band emissions . 26
B.1.3 MCOFDM: ACLR and MER performance . 26
Annex C (normative): COFDM measuring arrangements . 27
C.1 ETI errors . 27
C.2 Bit Error performance measurement . 27
Annex D (informative): Practical measurement of spurious domain emissions . 28
D.1 Introduction . 28
D.2 Directional coupler issues . 28
Annex E (informative): Spectrum measurements . 29
Annex F (informative): MCOFDM systems . 30
F.1 Introduction . 30
ETSI
---------------------- Page: 4 ----------------------
5 Final draft ETSI EN 302 077 V2.3.0 (2022-07)
F.2 Architecture . 31
Annex G (informative): Maximum measurement uncertainty . 33
Annex H (informative): Change history . 34
History . 35
ETSI
---------------------- Page: 5 ----------------------
6 Final draft ETSI EN 302 077 V2.3.0 (2022-07)
Intellectual Property Rights
Essential patents
IPRs essential or potentially essential to normative deliverables may have been declared to ETSI. The declarations
pertaining to these essential IPRs, if any, are publicly available for ETSI members and non-members, and can be
found in ETSI SR 000 314: "Intellectual Property Rights (IPRs); Essential, or potentially Essential, IPRs notified to
ETSI in respect of ETSI standards", which is available from the ETSI Secretariat. Latest updates are available on the
ETSI Web server (https://ipr.etsi.org/).
Pursuant to the ETSI Directives including the ETSI IPR Policy, no investigation regarding the essentiality of IPRs,
including IPR searches, has been carried out by ETSI. No guarantee can be given as to the existence of other IPRs not
referenced in ETSI SR 000 314 (or the updates on the ETSI Web server) which are, or may be, or may become,
essential to the present document.
Trademarks
The present document may include trademarks and/or tradenames which are asserted and/or registered by their owners.
ETSI claims no ownership of these except for any which are indicated as being the property of ETSI, and conveys no
right to use or reproduce any trademark and/or tradename. Mention of those trademarks in the present document does
not constitute an endorsement by ETSI of products, services or organizations associated with those trademarks.
DECT™, PLUGTESTS™, UMTS™ and the ETSI logo are trademarks of ETSI registered for the benefit of its
Members. 3GPP™ and LTE™ are trademarks of ETSI registered for the benefit of its Members and of the 3GPP
Organizational Partners. oneM2M™ logo is a trademark of ETSI registered for the benefit of its Members and of the
®
oneM2M Partners. GSM and the GSM logo are trademarks registered and owned by the GSM Association.
Foreword
This final draft Harmonised European Standard (EN) has been produced by ETSI Technical Committee
Electromagnetic compatibility and Radio spectrum Matters (ERM), and is now submitted for the Vote phase of the
ETSI standards EN Approval Procedure.
The present document has been prepared under the Commission's standardisation request C(2015) 5376 final [i.4] to
provide one voluntary means of conforming to the essential requirements of Directive 2014/53/EU on the harmonisation
of the laws of the Member States relating to the making available on the market of radio equipment and repealing
Directive 1999/5/EC [i.1].
Once the present document is cited in the Official Journal of the European Union under that Directive, compliance with
the normative clauses of the present document given in table A.1 confers, within the limits of the scope of the present
document, a presumption of conformity with the corresponding essential requirements of that Directive, and associated
EFTA regulations.
Proposed national transposition dates
Date of latest announcement of this EN (doa): 3 months after ETSI publication
Date of latest publication of new National Standard
or endorsement of this EN (dop/e): 6 months after doa
Date of withdrawal of any conflicting National Standard (dow): 18 months after doa
ETSI
---------------------- Page: 6 ----------------------
7 Final draft ETSI EN 302 077 V2.3.0 (2022-07)
Modal verbs terminology
In the present document "shall", "shall not", "should", "should not", "may", "need not", "will", "will not", "can" and
"cannot" are to be interpreted as described in clause 3.2 of the ETSI Drafting Rules (Verbal forms for the expression of
provisions).
"must" and "must not" are NOT allowed in ETSI deliverables except when used in direct citation.
ETSI
---------------------- Page: 7 ----------------------
8 Final draft ETSI EN 302 077 V2.3.0 (2022-07)
1 Scope
The present document specifies technical characteristics and methods of measurements for transmitting equipment for
broadcast sound services using the Digital Audio Broadcast (DAB) modulation system operating in VHF band III
(174 MHz to 240 MHz).
DAB transmissions are licensed by national administrations. The Final Acts of the CEPT T-DAB Planning Meeting
Constanţa, 2007 (WI95revCO07) [i.2] and the Final Acts of the Regional Radiocommunication Conference for planning
of the digital terrestrial broadcasting service in parts of Regions 1 and 3, in the frequency bands 174 MHz to 230 MHz
and 470 MHz to 862 MHz (RRC-06) [i.3] provide spectrum masks for Out-of-Band emissions under different
conditions. These requirements are represented by four transmission cases in the present document, see table 0. The
license conditions set by the national administration stipulate which transmission case (Out-of-Band spectrum mask)
applies.
Table 0: Transmission cases
Case Description Identification in Identification in RRC-06
WI95revCO07
1 Applicable to DAB transmissions operating in areas 1: critical 2: sensitive
critical for adjacent channel DAB to DAB interference,
and in any case when it is necessary to protect other
services operating on adjacent frequencies on a primary
basis
2 Applicable to DAB transmissions when no other case 2: non-critical 1: non-critical
applies
3 Applicable to DAB transmitters in exceptional Critical case considering
circumstances to protect safety services protection of distress
and safety frequencies
4 Applicable to DAB transmissions operating on a 3: sensitive in certain
case-by-case basis in certain areas areas where channel 12D
is in use
NOTE: The relationship between the present document and essential requirements of article 3.2 of
Directive 2014/53/EU [i.1] is given in annex A.
2 References
2.1 Normative references
References are either specific (identified by date of publication and/or edition number or version number) or
non-specific. For specific references, only the cited version applies. For non-specific references, the latest version of the
referenced document (including any amendments) applies.
Referenced documents which are not found to be publicly available in the expected location might be found at
https://docbox.etsi.org/Reference/.
NOTE: While any hyperlinks included in this clause were valid at the time of publication, ETSI cannot guarantee
their long term validity.
The following referenced documents are necessary for the application of the present document.
[1] ETSI EN 300 401 (V2.1.1) (01-2017): "Radio broadcasting systems; Digital Audio Broadcasting
(DAB) to mobile, portable and fixed receivers".
[2] ETSI ETS 300 799 (Edition 1) (09-1997): "Digital Audio Broadcasting (DAB); Distribution
interfaces; Ensemble Transport Interface (ETI)".
ETSI
---------------------- Page: 8 ----------------------
9 Final draft ETSI EN 302 077 V2.3.0 (2022-07)
2.2 Informative references
References are either specific (identified by date of publication and/or edition number or version number) or
non-specific. For specific references, only the cited version applies. For non-specific references, the latest version of the
referenced document (including any amendments) applies.
NOTE: While any hyperlinks included in this clause were valid at the time of publication, ETSI cannot guarantee
their long term validity.
The following referenced documents are not necessary for the application of the present document but they assist the
user with regard to a particular subject area.
[i.1] Directive 2014/53/EU of the European Parliament and of the Council of 16 April 2014 on the
harmonisation of the laws of the Member States relating to the making available on the market of
radio equipment and repealing Directive 1999/5/EC.
[i.2] Final Acts of the CEPT T-DAB Planning Meeting Constanţa, 2007 (WI95revCO07).
[i.3] Final Acts of the Regional Radiocommunication Conference for planning of the digital terrestrial
broadcasting service in parts of Regions 1 and 3, in the frequency bands 174-230 MHz and
470-862 MHz (RRC-06).
[i.4] Commission Implementing Decision C(2015) 5376 final of 4.8.2015 on a standardisation request
to the European Committee for Electrotechnical Standardisation and to the European
Telecommunications Standards Institute as regards radio equipment in support of Directive
2014/53/EU of the European Parliament and of the Council.
3 Definition of terms, symbols and abbreviations
3.1 Terms
For the purposes of the present document, the terms given in Directive 2014/53/EU [i.1] and the following apply:
Adjacent Channel Leakage Ratio (ACLR): ratio of the mean power of the DAB signal in the OFDM block at f to
L
the mean power of the unoccupied OFDM block within the MCOFDM group
antenna port: port of an apparatus which is designed, in normal operation, to be connected to an antenna using coaxial
cable
broadcasting service: radiocommun
...
Draft ETSI EN 302 077 V2.2.0 (2022-02)
HARMONISED EUROPEAN STANDARD
Transmitting equipment for the
Digital Audio Broadcasting (DAB) service;
Harmonised Standard for access to radio spectrum
---------------------- Page: 1 ----------------------
2 Draft ETSI EN 302 077 V2.2.0 (2022-02)
Reference
REN/ERM-TG17-201
Keywords
audio, broadcasting, DAB, digital, harmonised
standard, radio, regulation
ETSI
650 Route des Lucioles
F-06921 Sophia Antipolis Cedex - FRANCE
Tel.: +33 4 92 94 42 00 Fax: +33 4 93 65 47 16
Siret N° 348 623 562 00017 - APE 7112B
Association à but non lucratif enregistrée à la
Sous-Préfecture de Grasse (06) N° w061004871
Important notice
The present document can be downloaded from:
http://www.etsi.org/standards-search
The present document may be made available in electronic versions and/or in print. The content of any electronic and/or
print versions of the present document shall not be modified without the prior written authorization of ETSI. In case of any
existing or perceived difference in contents between such versions and/or in print, the prevailing version of an ETSI
deliverable is the one made publicly available in PDF format at www.etsi.org/deliver.
Users of the present document should be aware that the document may be subject to revision or change of status.
Information on the current status of this and other ETSI documents is available at
https://portal.etsi.org/TB/ETSIDeliverableStatus.aspx
If you find errors in the present document, please send your comment to one of the following services:
https://portal.etsi.org/People/CommiteeSupportStaff.aspx
Notice of disclaimer & limitation of liability
The information provided in the present deliverable is directed solely to professionals who have the appropriate degree of
experience to understand and interpret its content in accordance with generally accepted engineering or
other professional standard and applicable regulations.
No recommendation as to products and services or vendors is made or should be implied.
In no event shall ETSI be held liable for loss of profits or any other incidental or consequential damages.
Any software contained in this deliverable is provided "AS IS" with no warranties, express or implied, including but not
limited to, the warranties of merchantability, fitness for a particular purpose and non-infringement of intellectual property
rights and ETSI shall not be held liable in any event for any damages whatsoever (including, without limitation, damages
for loss of profits, business interruption, loss of information, or any other pecuniary loss) arising out of or related to the use
of or inability to use the software.
Copyright Notification
No part may be reproduced or utilized in any form or by any means, electronic or mechanical, including photocopying and
microfilm except as authorized by written permission of ETSI.
The content of the PDF version shall not be modified without the written authorization of ETSI.
The copyright and the foregoing restriction extend to reproduction in all media.
© ETSI 2022.
All rights reserved.
ETSI
---------------------- Page: 2 ----------------------
3 Draft ETSI EN 302 077 V2.2.0 (2022-02)
Contents
Intellectual Property Rights . 6
Foreword . 6
Modal verbs terminology . 7
1 Scope . 8
2 References . 8
2.1 Normative references . 8
2.2 Informative references . 9
3 Definition of terms, symbols and abbreviations . 9
3.1 Terms . 9
3.2 Symbols . 10
3.3 Abbreviations . 10
4 Technical requirements specifications . 11
4.1 Environmental profile . 11
4.2 Conformance requirements . 11
4.2.1 Rated output power . 11
4.2.1.1 Definition . 11
4.2.1.2 Limit . 11
4.2.1.3 Conformance . 11
4.2.2 Frequency stability . 11
4.2.2.1 Definition . 11
4.2.2.2 Limit . 12
4.2.2.3 Conformance . 12
4.2.3 Crest factor. 12
4.2.3.1 Definition . 12
4.2.3.2 Limit . 12
4.2.3.3 Conformance . 12
4.2.4 Spurious emissions . 12
4.2.4.1 Definition . 12
4.2.4.2 Limits . 12
4.2.4.3 Conformance . 13
4.2.5 Out-of-band emissions . 13
4.2.5.1 Definition . 13
4.2.5.2 Limit . 14
4.2.5.3 Conformance . 17
4.2.6 MCOFDM systems: ACLR performance . 18
4.2.6.1 Definition . 18
4.2.6.2 Limit . 18
4.2.6.3 Conformance . 18
4.2.7 MCOFDM systems: MER performance . 18
4.2.7.1 Definition . 18
4.2.7.2 Limit . 18
4.2.7.3 Conformance . 18
4.2.8 Behaviour in case of erroneous ETI signal . 18
4.2.8.1 Definition . 18
4.2.8.2 Limit . 18
4.2.8.3 Conformance . 19
4.2.9 BER-Performance degradation . 19
4.2.9.1 Definition . 19
4.2.9.2 Limit . 19
4.2.9.3 Conformance . 19
5 Testing for compliance with technical requirements . 19
5.1 Environmental conditions for testing . 19
5.2 Test modulating signal . 20
5.3 Methods of measurement . 20
ETSI
---------------------- Page: 3 ----------------------
4 Draft ETSI EN 302 077 V2.2.0 (2022-02)
5.3.1 Rated output power . 20
5.3.1.1 Initial conditions . 20
5.3.1.2 Procedure . 20
5.3.1.3 Test requirements . 20
5.3.2 Frequency stability . 20
5.3.2.1 Initial conditions . 20
5.3.2.2 Procedure . 21
5.3.2.3 Test requirements . 21
5.3.3 Crest factor. 21
5.3.3.1 Initial conditions . 21
5.3.3.2 Procedure . 21
5.3.3.3 Test requirements . 21
5.3.4 Spurious emissions . 21
5.3.4.1 Initial conditions . 21
5.3.4.2 Procedure . 22
5.3.4.3 Test requirements . 22
5.3.5 Out-of-band emissions . 22
5.3.5.1 Initial conditions . 22
5.3.5.2 Procedure . 22
5.3.5.3 Test requirements . 22
5.3.6 MCOFDM systems: ACLR . 22
5.3.6.1 Initial conditions . 22
5.3.6.2 Procedure . 22
5.3.6.3 Test requirements . 23
5.3.7 MCOFDM systems: MER . 23
5.3.7.1 Initial conditions . 23
5.3.7.2 Procedure . 23
5.3.7.3 Test requirements . 23
5.3.8 Behaviour in case of erroneous ETI signal . 23
5.3.8.1 Initial conditions . 23
5.3.8.2 Procedure . 23
5.3.8.3 Test requirements . 23
5.3.9 BER-Performance degradation . 24
5.3.9.1 Initial conditions . 24
5.3.9.2 Procedure . 24
5.3.9.3 Test requirements . 24
Annex A (informative): Relationship between the present document and the essential
requirements of Directive 2014/53/EU . 25
Annex B (normative): Measuring arrangements . 27
B.1 Testing arrangements for antenna port measurements . 27
B.1.1 Antenna port measurements . 27
B.1.2 Out-of-band emissions . 28
B.1.3 MCOFDM: ACLR and MER performance . 28
Annex C (normative): COFDM measuring arrangements . 29
C.1 ETI errors . 29
C.2 Bit Error performance measurement . 29
Annex D (informative): Practical measurement of spurious domain emissions . 30
D.1 Introduction . 30
D.2 Directional coupler issues . 30
Annex E (informative): Spectrum measurements . 31
Annex F (informative): MCOFDM systems . 32
F.1 Introduction . 32
ETSI
---------------------- Page: 4 ----------------------
5 Draft ETSI EN 302 077 V2.2.0 (2022-02)
F.2 Architecture . 33
Annex G (informative): Maximum measurement uncertainty . 35
Annex H (informative): Change history . 36
History . 37
ETSI
---------------------- Page: 5 ----------------------
6 Draft ETSI EN 302 077 V2.2.0 (2022-02)
Intellectual Property Rights
Essential patents
IPRs essential or potentially essential to normative deliverables may have been declared to ETSI. The declarations
pertaining to these essential IPRs, if any, are publicly available for ETSI members and non-members, and can be
found in ETSI SR 000 314: "Intellectual Property Rights (IPRs); Essential, or potentially Essential, IPRs notified to
ETSI in respect of ETSI standards", which is available from the ETSI Secretariat. Latest updates are available on the
ETSI Web server (https://ipr.etsi.org/).
Pursuant to the ETSI Directives including the ETSI IPR Policy, no investigation regarding the essentiality of IPRs,
including IPR searches, has been carried out by ETSI. No guarantee can be given as to the existence of other IPRs not
referenced in ETSI SR 000 314 (or the updates on the ETSI Web server) which are, or may be, or may become,
essential to the present document.
Trademarks
The present document may include trademarks and/or tradenames which are asserted and/or registered by their owners.
ETSI claims no ownership of these except for any which are indicated as being the property of ETSI, and conveys no
right to use or reproduce any trademark and/or tradename. Mention of those trademarks in the present document does
not constitute an endorsement by ETSI of products, services or organizations associated with those trademarks.
DECT™, PLUGTESTS™, UMTS™ and the ETSI logo are trademarks of ETSI registered for the benefit of its
Members. 3GPP™ and LTE™ are trademarks of ETSI registered for the benefit of its Members and of the 3GPP
Organizational Partners. oneM2M™ logo is a trademark of ETSI registered for the benefit of its Members and of the
®
oneM2M Partners. GSM and the GSM logo are trademarks registered and owned by the GSM Association.
Foreword
This draft Harmonised European Standard (EN) has been produced by ETSI Technical Committee Electromagnetic
compatibility and Radio spectrum Matters (ERM), and is now submitted for the combined Public Enquiry and Vote
phase of the ETSI standards EN Approval Procedure.
The present document has been prepared under the Commission's standardisation request C(2015) 5376 final [i.4] to
provide one voluntary means of conforming to the essential requirements of Directive 2014/53/EU on the harmonisation
of the laws of the Member States relating to the making available on the market of radio equipment and repealing
Directive 1999/5/EC [i.1].
Once the present document is cited in the Official Journal of the European Union under that Directive, compliance with
the normative clauses of the present document given in table A.1 confers, within the limits of the scope of the present
document, a presumption of conformity with the corresponding essential requirements of that Directive, and associated
EFTA regulations.
Proposed national transposition dates
Date of latest announcement of this EN (doa): 3 months after ETSI publication
Date of latest publication of new National Standard
or endorsement of this EN (dop/e): 6 months after doa
Date of withdrawal of any conflicting National Standard (dow): 18 months after doa
ETSI
---------------------- Page: 6 ----------------------
7 Draft ETSI EN 302 077 V2.2.0 (2022-02)
Modal verbs terminology
In the present document "shall", "shall not", "should", "should not", "may", "need not", "will", "will not", "can" and
"cannot" are to be interpreted as described in clause 3.2 of the ETSI Drafting Rules (Verbal forms for the expression of
provisions).
"must" and "must not" are NOT allowed in ETSI deliverables except when used in direct citation.
ETSI
---------------------- Page: 7 ----------------------
8 Draft ETSI EN 302 077 V2.2.0 (2022-02)
1 Scope
The present document specifies technical characteristics and methods of measurements for transmitting equipment for
broadcast sound services using the Digital Audio Broadcast (DAB) modulation system operating in VHF band III
(174 MHz to 240 MHz).
DAB transmissions are licensed by national administrations. The Final Acts of the CEPT T-DAB Planning Meeting
Constanţa, 2007 (WI95revCO07) [i.2] and the Final Acts of the Regional Radiocommunication Conference for planning
of the digital terrestrial broadcasting service in parts of Regions 1 and 3, in the frequency bands 174 MHz to 230 MHz
and 470 MHz to 862 MHz (RRC-06) [i.3] provide spectrum masks for Out-of-Band emissions under different
conditions. These requirements are represented by four transmission cases in the present document, see table 0. The
license conditions set by the national administration stipulate which transmission case (Out-of-Band spectrum mask)
applies.
Table 0: Transmission cases
Case Description Identification in Identification in RRC-
WI95revCO07 06
1 Applicable to DAB transmissions operating in areas critical 1: critical 2: sensitive
for adjacent channel DAB to DAB interference, and in any
case when it is necessary to protect other services
operating on adjacent frequencies on a primary basis
2 Applicable to DAB transmissions when no other case 2: non-critical 1: non-critical
applies
3 Applicable to DAB transmitters in exceptional Critical case considering
circumstances to protect safety services protection of distress and
safety frequencies
4 Applicable to DAB transmissions operating on a case-by- 3: sensitive in certain
case basis in certain areas areas where channel
12D is in use
NOTE: The relationship between the present document and essential requirements of article 3.2 of
Directive 2014/53/EU [i.1] is given in annex A.
2 References
2.1 Normative references
References are either specific (identified by date of publication and/or edition number or version number) or
non-specific. For specific references, only the cited version applies. For non-specific references, the latest version of the
referenced document (including any amendments) applies.
Referenced documents which are not found to be publicly available in the expected location might be found at
https://docbox.etsi.org/Reference/.
NOTE: While any hyperlinks included in this clause were valid at the time of publication, ETSI cannot guarantee
their long term validity.
The following referenced documents are necessary for the application of the present document.
[1] ETSI EN 300 401 (V2.1.1) (01-2017): "Radio broadcasting systems; Digital Audio Broadcasting
(DAB) to mobile, portable and fixed receivers".
[2] ETSI ETS 300 799 (Edition 1) (09-1997): "Digital Audio Broadcasting (DAB); Distribution
interfaces; Ensemble Transport Interface (ETI)".
ETSI
---------------------- Page: 8 ----------------------
9 Draft ETSI EN 302 077 V2.2.0 (2022-02)
2.2 Informative references
References are either specific (identified by date of publication and/or edition number or version number) or
non-specific. For specific references, only the cited version applies. For non-specific references, the latest version of the
referenced document (including any amendments) applies.
NOTE: While any hyperlinks included in this clause were valid at the time of publication, ETSI cannot guarantee
their long term validity.
The following referenced documents are not necessary for the application of the present document but they assist the
user with regard to a particular subject area.
[i.1] Directive 2014/53/EU of the European Parliament and of the Council of 16 April 2014 on the
harmonisation of the laws of the Member States relating to the making available on the market of
radio equipment and repealing Directive 1999/5/EC.
[i.2] Final Acts of the CEPT T-DAB Planning Meeting Constanţa, 2007 (WI95revCO07).
[i.3] Final Acts of the Regional Radiocommunication Conference for planning of the digital terrestrial
broadcasting service in parts of Regions 1 and 3, in the frequency bands 174-230 MHz and
470-862 MHz (RRC-06).
[i.4] Commission Implementing Decision C(2015) 5376 final of 4.8.2015 on a standardisation request
to the European Committee for Electrotechnical Standardisation and to the European
Telecommunications Standards Institute as regards radio equipment in support of
Directive 2014/53/EU of the European Parliament and of the Council.
3 Definition of terms, symbols and abbreviations
3.1 Terms
For the purposes of the present document, the terms given in Directive 2014/53/EU [i.1] and the following apply:
Adjacent Channel Leakage Ratio (ACLR): ratio of the mean power of the DAB signal in the OFDM block at f to
L
the mean power of the unoccupied OFDM block within the MCOFDM group
antenna port: port of an apparatus which is designed, in normal operation, to be connected to an antenna using coaxial
cable
broadcasting service: radiocommunication service in which the transmissions are intended for direct reception by the
general public
NOTE: This service may include sound transmissions, television transmissions or other types of transmission.
DAB transmitter: device
...
SLOVENSKI STANDARD
oSIST prEN 302 077 V2.2.0:2022
01-april-2022
Oddajniška oprema za storitev digitalne zvokovne radiodifuzije (DAB) -
Harmonizirani standard za dostop do radijskega spektra
Transmitting equipment for the Digital Audio Broadcasting (DAB) service - Harmonised
Standard for access to radio spectrum
Ta slovenski standard je istoveten z: ETSI EN 302 077 V2.2.0 (2022-02)
ICS:
33.060.20 Sprejemna in oddajna Receiving and transmitting
oprema equipment
33.170 Televizijska in radijska Television and radio
difuzija broadcasting
oSIST prEN 302 077 V2.2.0:2022 en
2003-01.Slovenski inštitut za standardizacijo. Razmnoževanje celote ali delov tega standarda ni dovoljeno.
---------------------- Page: 1 ----------------------
oSIST prEN 302 077 V2.2.0:2022
---------------------- Page: 2 ----------------------
oSIST prEN 302 077 V2.2.0:2022
Draft ETSI EN 302 077 V2.2.0 (2022-02)
HARMONISED EUROPEAN STANDARD
Transmitting equipment for the
Digital Audio Broadcasting (DAB) service;
Harmonised Standard for access to radio spectrum
---------------------- Page: 3 ----------------------
oSIST prEN 302 077 V2.2.0:2022
2 Draft ETSI EN 302 077 V2.2.0 (2022-02)
Reference
REN/ERM-TG17-201
Keywords
audio, broadcasting, DAB, digital, harmonised
standard, radio, regulation
ETSI
650 Route des Lucioles
F-06921 Sophia Antipolis Cedex - FRANCE
Tel.: +33 4 92 94 42 00 Fax: +33 4 93 65 47 16
Siret N° 348 623 562 00017 - APE 7112B
Association à but non lucratif enregistrée à la
Sous-Préfecture de Grasse (06) N° w061004871
Important notice
The present document can be downloaded from:
http://www.etsi.org/standards-search
The present document may be made available in electronic versions and/or in print. The content of any electronic and/or
print versions of the present document shall not be modified without the prior written authorization of ETSI. In case of any
existing or perceived difference in contents between such versions and/or in print, the prevailing version of an ETSI
deliverable is the one made publicly available in PDF format at www.etsi.org/deliver.
Users of the present document should be aware that the document may be subject to revision or change of status.
Information on the current status of this and other ETSI documents is available at
https://portal.etsi.org/TB/ETSIDeliverableStatus.aspx
If you find errors in the present document, please send your comment to one of the following services:
https://portal.etsi.org/People/CommiteeSupportStaff.aspx
Notice of disclaimer & limitation of liability
The information provided in the present deliverable is directed solely to professionals who have the appropriate degree of
experience to understand and interpret its content in accordance with generally accepted engineering or
other professional standard and applicable regulations.
No recommendation as to products and services or vendors is made or should be implied.
In no event shall ETSI be held liable for loss of profits or any other incidental or consequential damages.
Any software contained in this deliverable is provided "AS IS" with no warranties, express or implied, including but not
limited to, the warranties of merchantability, fitness for a particular purpose and non-infringement of intellectual property
rights and ETSI shall not be held liable in any event for any damages whatsoever (including, without limitation, damages
for loss of profits, business interruption, loss of information, or any other pecuniary loss) arising out of or related to the use
of or inability to use the software.
Copyright Notification
No part may be reproduced or utilized in any form or by any means, electronic or mechanical, including photocopying and
microfilm except as authorized by written permission of ETSI.
The content of the PDF version shall not be modified without the written authorization of ETSI.
The copyright and the foregoing restriction extend to reproduction in all media.
© ETSI 2022.
All rights reserved.
ETSI
---------------------- Page: 4 ----------------------
oSIST prEN 302 077 V2.2.0:2022
3 Draft ETSI EN 302 077 V2.2.0 (2022-02)
Contents
Intellectual Property Rights . 6
Foreword . 6
Modal verbs terminology . 7
1 Scope . 8
2 References . 8
2.1 Normative references . 8
2.2 Informative references . 9
3 Definition of terms, symbols and abbreviations . 9
3.1 Terms . 9
3.2 Symbols . 10
3.3 Abbreviations . 10
4 Technical requirements specifications . 11
4.1 Environmental profile . 11
4.2 Conformance requirements . 11
4.2.1 Rated output power . 11
4.2.1.1 Definition . 11
4.2.1.2 Limit . 11
4.2.1.3 Conformance . 11
4.2.2 Frequency stability . 11
4.2.2.1 Definition . 11
4.2.2.2 Limit . 12
4.2.2.3 Conformance . 12
4.2.3 Crest factor. 12
4.2.3.1 Definition . 12
4.2.3.2 Limit . 12
4.2.3.3 Conformance . 12
4.2.4 Spurious emissions . 12
4.2.4.1 Definition . 12
4.2.4.2 Limits . 12
4.2.4.3 Conformance . 13
4.2.5 Out-of-band emissions . 13
4.2.5.1 Definition . 13
4.2.5.2 Limit . 14
4.2.5.3 Conformance . 17
4.2.6 MCOFDM systems: ACLR performance . 18
4.2.6.1 Definition . 18
4.2.6.2 Limit . 18
4.2.6.3 Conformance . 18
4.2.7 MCOFDM systems: MER performance . 18
4.2.7.1 Definition . 18
4.2.7.2 Limit . 18
4.2.7.3 Conformance . 18
4.2.8 Behaviour in case of erroneous ETI signal . 18
4.2.8.1 Definition . 18
4.2.8.2 Limit . 18
4.2.8.3 Conformance . 19
4.2.9 BER-Performance degradation . 19
4.2.9.1 Definition . 19
4.2.9.2 Limit . 19
4.2.9.3 Conformance . 19
5 Testing for compliance with technical requirements . 19
5.1 Environmental conditions for testing . 19
5.2 Test modulating signal . 20
5.3 Methods of measurement . 20
ETSI
---------------------- Page: 5 ----------------------
oSIST prEN 302 077 V2.2.0:2022
4 Draft ETSI EN 302 077 V2.2.0 (2022-02)
5.3.1 Rated output power . 20
5.3.1.1 Initial conditions . 20
5.3.1.2 Procedure . 20
5.3.1.3 Test requirements . 20
5.3.2 Frequency stability . 20
5.3.2.1 Initial conditions . 20
5.3.2.2 Procedure . 21
5.3.2.3 Test requirements . 21
5.3.3 Crest factor. 21
5.3.3.1 Initial conditions . 21
5.3.3.2 Procedure . 21
5.3.3.3 Test requirements . 21
5.3.4 Spurious emissions . 21
5.3.4.1 Initial conditions . 21
5.3.4.2 Procedure . 22
5.3.4.3 Test requirements . 22
5.3.5 Out-of-band emissions . 22
5.3.5.1 Initial conditions . 22
5.3.5.2 Procedure . 22
5.3.5.3 Test requirements . 22
5.3.6 MCOFDM systems: ACLR . 22
5.3.6.1 Initial conditions . 22
5.3.6.2 Procedure . 22
5.3.6.3 Test requirements . 23
5.3.7 MCOFDM systems: MER . 23
5.3.7.1 Initial conditions . 23
5.3.7.2 Procedure . 23
5.3.7.3 Test requirements . 23
5.3.8 Behaviour in case of erroneous ETI signal . 23
5.3.8.1 Initial conditions . 23
5.3.8.2 Procedure . 23
5.3.8.3 Test requirements . 23
5.3.9 BER-Performance degradation . 24
5.3.9.1 Initial conditions . 24
5.3.9.2 Procedure . 24
5.3.9.3 Test requirements . 24
Annex A (informative): Relationship between the present document and the essential
requirements of Directive 2014/53/EU . 25
Annex B (normative): Measuring arrangements . 27
B.1 Testing arrangements for antenna port measurements . 27
B.1.1 Antenna port measurements . 27
B.1.2 Out-of-band emissions . 28
B.1.3 MCOFDM: ACLR and MER performance . 28
Annex C (normative): COFDM measuring arrangements . 29
C.1 ETI errors . 29
C.2 Bit Error performance measurement . 29
Annex D (informative): Practical measurement of spurious domain emissions . 30
D.1 Introduction . 30
D.2 Directional coupler issues . 30
Annex E (informative): Spectrum measurements . 31
Annex F (informative): MCOFDM systems . 32
F.1 Introduction . 32
ETSI
---------------------- Page: 6 ----------------------
oSIST prEN 302 077 V2.2.0:2022
5 Draft ETSI EN 302 077 V2.2.0 (2022-02)
F.2 Architecture . 33
Annex G (informative): Maximum measurement uncertainty . 35
Annex H (informative): Change history . 36
History . 37
ETSI
---------------------- Page: 7 ----------------------
oSIST prEN 302 077 V2.2.0:2022
6 Draft ETSI EN 302 077 V2.2.0 (2022-02)
Intellectual Property Rights
Essential patents
IPRs essential or potentially essential to normative deliverables may have been declared to ETSI. The declarations
pertaining to these essential IPRs, if any, are publicly available for ETSI members and non-members, and can be
found in ETSI SR 000 314: "Intellectual Property Rights (IPRs); Essential, or potentially Essential, IPRs notified to
ETSI in respect of ETSI standards", which is available from the ETSI Secretariat. Latest updates are available on the
ETSI Web server (https://ipr.etsi.org/).
Pursuant to the ETSI Directives including the ETSI IPR Policy, no investigation regarding the essentiality of IPRs,
including IPR searches, has been carried out by ETSI. No guarantee can be given as to the existence of other IPRs not
referenced in ETSI SR 000 314 (or the updates on the ETSI Web server) which are, or may be, or may become,
essential to the present document.
Trademarks
The present document may include trademarks and/or tradenames which are asserted and/or registered by their owners.
ETSI claims no ownership of these except for any which are indicated as being the property of ETSI, and conveys no
right to use or reproduce any trademark and/or tradename. Mention of those trademarks in the present document does
not constitute an endorsement by ETSI of products, services or organizations associated with those trademarks.
DECT™, PLUGTESTS™, UMTS™ and the ETSI logo are trademarks of ETSI registered for the benefit of its
Members. 3GPP™ and LTE™ are trademarks of ETSI registered for the benefit of its Members and of the 3GPP
Organizational Partners. oneM2M™ logo is a trademark of ETSI registered for the benefit of its Members and of the
®
oneM2M Partners. GSM and the GSM logo are trademarks registered and owned by the GSM Association.
Foreword
This draft Harmonised European Standard (EN) has been produced by ETSI Technical Committee Electromagnetic
compatibility and Radio spectrum Matters (ERM), and is now submitted for the combined Public Enquiry and Vote
phase of the ETSI standards EN Approval Procedure.
The present document has been prepared under the Commission's standardisation request C(2015) 5376 final [i.4] to
provide one voluntary means of conforming to the essential requirements of Directive 2014/53/EU on the harmonisation
of the laws of the Member States relating to the making available on the market of radio equipment and repealing
Directive 1999/5/EC [i.1].
Once the present document is cited in the Official Journal of the European Union under that Directive, compliance with
the normative clauses of the present document given in table A.1 confers, within the limits of the scope of the present
document, a presumption of conformity with the corresponding essential requirements of that Directive, and associated
EFTA regulations.
Proposed national transposition dates
Date of latest announcement of this EN (doa): 3 months after ETSI publication
Date of latest publication of new National Standard
or endorsement of this EN (dop/e): 6 months after doa
Date of withdrawal of any conflicting National Standard (dow): 18 months after doa
ETSI
---------------------- Page: 8 ----------------------
oSIST prEN 302 077 V2.2.0:2022
7 Draft ETSI EN 302 077 V2.2.0 (2022-02)
Modal verbs terminology
In the present document "shall", "shall not", "should", "should not", "may", "need not", "will", "will not", "can" and
"cannot" are to be interpreted as described in clause 3.2 of the ETSI Drafting Rules (Verbal forms for the expression of
provisions).
"must" and "must not" are NOT allowed in ETSI deliverables except when used in direct citation.
ETSI
---------------------- Page: 9 ----------------------
oSIST prEN 302 077 V2.2.0:2022
8 Draft ETSI EN 302 077 V2.2.0 (2022-02)
1 Scope
The present document specifies technical characteristics and methods of measurements for transmitting equipment for
broadcast sound services using the Digital Audio Broadcast (DAB) modulation system operating in VHF band III
(174 MHz to 240 MHz).
DAB transmissions are licensed by national administrations. The Final Acts of the CEPT T-DAB Planning Meeting
Constanţa, 2007 (WI95revCO07) [i.2] and the Final Acts of the Regional Radiocommunication Conference for planning
of the digital terrestrial broadcasting service in parts of Regions 1 and 3, in the frequency bands 174 MHz to 230 MHz
and 470 MHz to 862 MHz (RRC-06) [i.3] provide spectrum masks for Out-of-Band emissions under different
conditions. These requirements are represented by four transmission cases in the present document, see table 0. The
license conditions set by the national administration stipulate which transmission case (Out-of-Band spectrum mask)
applies.
Table 0: Transmission cases
Case Description Identification in Identification in RRC-
WI95revCO07 06
1 Applicable to DAB transmissions operating in areas critical 1: critical 2: sensitive
for adjacent channel DAB to DAB interference, and in any
case when it is necessary to protect other services
operating on adjacent frequencies on a primary basis
2 Applicable to DAB transmissions when no other case 2: non-critical 1: non-critical
applies
3 Applicable to DAB transmitters in exceptional Critical case considering
circumstances to protect safety services protection of distress and
safety frequencies
4 Applicable to DAB transmissions operating on a case-by- 3: sensitive in certain
case basis in certain areas areas where channel
12D is in use
NOTE: The relationship between the present document and essential requirements of article 3.2 of
Directive 2014/53/EU [i.1] is given in annex A.
2 References
2.1 Normative references
References are either specific (identified by date of publication and/or edition number or version number) or
non-specific. For specific references, only the cited version applies. For non-specific references, the latest version of the
referenced document (including any amendments) applies.
Referenced documents which are not found to be publicly available in the expected location might be found at
https://docbox.etsi.org/Reference/.
NOTE: While any hyperlinks included in this clause were valid at the time of publication, ETSI cannot guarantee
their long term validity.
The following referenced documents are necessary for the application of the present document.
[1] ETSI EN 300 401 (V2.1.1) (01-2017): "Radio broadcasting systems; Digital Audio Broadcasting
(DAB) to mobile, portable and fixed receivers".
[2] ETSI ETS 300 799 (Edition 1) (09-1997): "Digital Audio Broadcasting (DAB); Distribution
interfaces; Ensemble Transport Interface (ETI)".
ETSI
---------------------- Page: 10 ----------------------
oSIST prEN 302 077 V2.2.0:2022
9 Draft ETSI EN 302 077 V2.2.0 (2022-02)
2.2 Informative references
References are either specific (identified by date of publication and/or edition number or version number) or
non-specific. For specific references, only the cited version applies. For non-specific references, the latest version of the
referenced document (including any amendments) applies.
NOTE: While any hyperlinks included in this clause were valid at the time of publication, ETSI cannot guarantee
their long term validity.
The following referenced documents are not necessary for the application of the present document but they assist the
user with regard to a particular subject area.
[i.1] Directive 2014/53/EU of the European Parliament and of the Council of 16 April 2014 on the
harmonisation of the laws of the Member States relating to the making available on the market of
radio equipment and repealing Directive 1999/5/EC.
[i.2] Final Acts of the CEPT T-DAB Planning Meeting Constanţa, 2007 (WI95revCO07).
[i.3] Final Acts of the Regional Radiocommunication Conference for planning of the digital terrestrial
broadcasting service in parts of Regions 1 and 3, in the f
...
Questions, Comments and Discussion
Ask us and Technical Secretary will try to provide an answer. You can facilitate discussion about the standard in here.