ETSI TS 102 916-1 V1.2.1 (2023-05)

Intelligent Transport Systems (ITS); Test specifications for the mitigation techniques to avoid interference between Cooperative ITS-G5 and TTT DSRC; Part 1: Protocol Implementation Conformance Statement (PICS)

RTS/ITS-00440

General Information

• Status: Not Published
• Technical Committee: ITS WG4 - Media and Medium related
• Current Stage: 12 - Completion
• Due Date: 15-May-2023
• Completion Date: 09-May-2023

Standards Content (Sample)

TECHNICAL SPECIFICATION
Intelligent Transport Systems (ITS);
Test specifications for the mitigation techniques to avoid
interference between Cooperative ITS-G5 and TTT DSRC;
Part 1: Protocol Implementation Conformance
Statement (PICS)
2 ETSI TS 102 916-1 V1.2.1 (2023-05)

Reference
RTS/ITS-00440
Keywords
DSRC, ITS, PICS, radio, RTTT
ETSI
650 Route des Lucioles
F-06921 Sophia Antipolis Cedex - FRANCE

Tel.: [phone]  Fax: [phone]

Siret N° 348 623 562 00017 - APE 7112B
Association à but non lucratif enregistrée à la
Sous-Préfecture de Grasse (06) N° w061004871

Important notice
The present document can be downloaded from:
https://www.etsi.org/standards-search
The present document may be made available in electronic versions and/or in print. The content of any electronic and/or
print versions of the present document shall not be modified without the prior written authorization of ETSI. In case of any
existing or perceived difference in contents between such versions and/or in print, the prevailing version of an ETSI
deliverable is the one made publicly available in PDF format at www.etsi.org/deliver.
Users of the present document should be aware that the document may be subject to revision or change of status.
Information on the current status of this and other ETSI documents is available at
https://portal.etsi.org/TB/ETSIDeliverableStatus.aspx
If you find errors in the present document, please send your comment to one of the following services:
https://portal.etsi.org/People/CommiteeSupportStaff.aspx
If you find a security vulnerability in the present document, please report it through our
Coordinated Vulnerability Disclosure Program:
https://www.etsi.org/standards/coordinated-vulnerability-disclosure
Notice of disclaimer & limitation of liability
The information provided in the present deliverable is directed solely to professionals who have the appropriate degree of
experience to understand and interpret its content in accordance with generally accepted engineering or
other professional standard and applicable regulations.
No recommendation as to products and services or vendors is made or should be implied.
No representation or warranty is made that this deliverable is technically accurate or sufficient or conforms to any law
anty is made of merchantability or fitness
and/or governmental rule and/or regulation and further, no representation or warr
for any particular purpose or against infringement of intellectual property rights.
In no event shall ETSI be held liable for loss of profits or any other incidental or consequential damages.

Any software contained in this deliverable is provided "AS IS" with no warranties, express or implied, including but not
limited to, the warranties of merchantability, fitness for a particular purpose and non-infringement of intellectual property
rights and ETSI shall not be held liable in any event for any damages whatsoever (including, without limitation, damages
for loss of profits, business interruption, loss of information, or any other pecuniary loss) arising out of or related to the use
of or inability to use the software.
Copyright Notification
No part may be reproduced or utilized in any form or by any means, electronic or mechanical, including photocopying and
microfilm except as authorized by written permission of ETSI.
The content of the PDF version shall not be modified without the written authorization of ETSI.
The copyright and the foregoing restriction extend to reproduction in all media.

© ETSI 2023.
All rights reserved.
ETSI
3 ETSI TS 102 916-1 V1.2.1 (2023-05)
Contents
Intellectual Property Rights . 4
Foreword . 4
Modal verbs terminology . 4
Introduction . 4
1 Scope . 5
2 References . 5
2.1 Normative references . 5
2.2 Informative references . 5
3 Definition of terms, symbols and abbreviations . 6
3.1 Terms . 6
3.2 Symbols . 6
3.3 Abbreviations . 6
4 Conformance . 6
Annex A (normative): PICS proforma . 8
A.1 The right to copy . 8
A.2 Guidance for completing the ICS proforma . 8
A.2.1 Purposes and structure . 8
A.2.2 Abbreviations and conventions . 8
A.2.3 Instructions for completing the PICS proforma. 9
A.3 Identification of the Network Equipment . 10
A.3.1 Introduction . 10
A.3.2 Date of the statement . 10
A.3.3 Network Equipment Under Test identification. 10
A.3.4 Product supplier . 10
A.3.5 Client . 11
A.3.6 PICS contact person . 11
A.4 Identification of the protocol . 12
A.5 Global statement of conformance . 12
A.6 PICS proforma tables . 12
A.6.1 Detection and mitigation methods, coexistence modes . 12
A.6.2 System Capabilities . 13
A.6.3 ITS-G5 antenna mounting . 13
History . 14

ETSI
4 ETSI TS 102 916-1 V1.2.1 (2023-05)
Intellectual Property Rights
Essential patents
IPRs essential or potentially essential to normative deliverables may have been declared to ETSI. The declarations
pertaining to these essential IPRs, if any, are publicly available for ETSI members and non-members, and can be
found in ETSI SR 000 314: "Intellectual Property Rights (IPRs); Essential, or potentially Essential, IPRs notified to
ETSI in respect of ETSI standards", which is available from the ETSI Secretariat. Latest updates are available on the
ETSI Web server (https://ipr.etsi.org/).
Pursuant to the ETSI Directives including the ETSI IPR Policy, no investigation regarding the essentiality of IPRs,
including IPR searches, has been carried out by ETSI. No guarantee can be given as to the existence of other IPRs not
referenced in ETSI SR 000 314 (or the updates on the ETSI Web server) which are, or may be, or may become,
essential to the present document.
Trademarks
The present document may include trademarks and/or tradenames which are asserted and/or registered by their owners.
ETSI claims no ownership of these except for any which are indicated as being the property of ETSI, and conveys no
right to use or reproduce any trademark and/or tradename. Mention of those trademarks in the present document does
not constitute an endorsement by ETSI of products, services or organizations associated with those trademarks.
DECT™, PLUGTESTS™, UMTS™ and the ETSI logo are trademarks of ETSI registered for the benefit of its

Members. 3GPP™ and LTE™ are trademarks of ETSI registered for the benefit of its Members and of the 3GPP
Organizational Partners. oneM2M™ logo is a trademark of ETSI registered for the benefit of its Members and of the ®
oneM2M Partners. GSM and the GSM logo are trademarks registered and owned by the GSM Association.
Foreword
This Technical Specification (TS) has been produced by ETSI Technical Committee Intelligent Transport Systems
(ITS).
The present document is part 1 of a multi-part deliverable covering the Test specifications for the mitigation techniques
to avoid interference between Cooperative ITS-G5 and TTT DSRC, as identified below:
Part 1: "Protocol Implementation Conformance Statement (PICS)";
Part 2: "Test Suite Structure and Test Purposes (TSS & TP)".
Modal verbs terminology
In the present document "shall", "shall not", "should", "should not", "may", "need not", "will", "will not", "can" and
"cannot" are to be interpreted as described in clause 3.2 of the ETSI Drafting Rules (Verbal forms for the expression of
provisions).
"must" and "must not" are NOT allowed in ETSI deliverables except when used in direct citation.
Introduction
To evaluate protocol conformance of a particular implementation, it is necessary to have a statement of which
capabilities and options have been implemented for a telecommunication specification. Such a statement is called a
Protocol Implementation Conformance Statement (PICS).
ETSI
5 ETSI TS 102 916-1 V1.2.1 (2023-05)
1 Scope
The present document provides the Protocol Implementation Conformance Statement (PICS) proforma for the test
specifications for the methods to ensure coexistence of cooperative ITS G5 with TTT DSRC as specified in ETSI
TS 102 792 [3] and ETSI EN 302 663 [1] in compliance with the relevant requirements and in accordance with the
relevant guidance given in ISO/IEC 9646-7 [2] and ETSI ETS 300 406 [i.2].
The supplier of a protocol implementation which is claimed to conform to ETSI TS 102 792 [3] and ETSI
EN 302 663 [1] is required to complete a copy of the PICS proforma provided in annex A of the present document and
is required to provide the information necessary to identify both the supplier and the implementation.
2 References
2.1 Normative references
References are either specific (identified by date of publication and/or edition number or version number) or
non-specific. For specific references, only the cited version applies. For non-specific references, the latest version of the
referenced document (including any amendments) applies.
Referenced documents which are not found to be publicly available in the expected location might be found at
https://docbox.etsi.org/Reference.
NOTE: While any hyperlinks included in this clause were valid at the time of publication, ETSI cannot guarantee
their long term validity.
The following referenced documents are necessary for the application of the present document.
[1] ETSI EN 302 663: "Intelligent Transport Systems (ITS); ITS-G5 Access layer specification for
Intelligent Transport Systems operating in the 5 GHz frequency band".
[2] ISO/IEC 9646-7: "Information technology -- Open Systems Interconnection -- Conformance
testing methodology and framework -- Part 7: Implementation Conformance Statements".
[3] ETSI TS 102 792 (V1.2.1): "Intelligent Transport Systems (ITS); Mitigation techniques to avoid
interference between European CEN Dedicated Short Range Communication (CEN DSRC)
equipment and Intelligent Transport Systems (ITS) operating in the 5 GHz frequency range".
2.2 Informative references
References are either specific (identified by date of publication and/or edition number or version number) or
non-specific. For specific references, only the cited version applies. For non-specific references, the latest version of the
referenced document (including any amendments) applies.
NOTE: While any hyperlinks included in this clause were valid at the time of publication, ETSI cannot guarantee
their long term validity.
The following referenced documents are not necessary for the application of the present document but they assist the
user with regard to a particular subject area.
[i.1] ISO/IEC 9646-1: "Information technology -- Open Systems Interconnection -- Conformance
testing methodology and framework -- Part 1: General concepts".
[i.2] ETSI ETS 300 406: "Methods for testing and Specification (MTS); Protocol and profile
conformance testing specifications; Standardization methodology".
ETSI
6 ETSI TS 102 916-1 V1.2.1 (2023-05)
3 Definition of terms, symbols and abbreviations
3.1 Terms
For the purposes of the present document, the terms given in ETSI TS 102 792 [3], ETSI EN 302 663 [1] and the
following apply:
PICS proforma: document, in the form of a questionnaire, designed by the protocol specifier or conformance test suite
specifier, which, when completed for an OSI implementation or system, becomes the PICS
NOTE: See ISO/IEC 9646-1 [i.1].
Protocol Implementation Conformance Statement (PICS): statement made by the supplier of an Open Systems
Interconnection (OSI) implementation or system, stating which capabilities have been implemented for a given
OSI protocol
NOTE: See ISO/IEC 9646-1 [i.1].
static conformance review: review of the extent to which the static conformance requirements are met by the IUT,
accomplished by comparing the PICS with the static conformance requirements expressed in the relevant standard(s)
NOTE: See ISO/IEC 9646-1 [i.1].
3.2 Symbols
Void.
3.3 Abbreviations
For the purposes of the present document, the abbreviations given in ETSI TS 102 792 [3], ETSI EN 302 663 [1] and
the following apply:
DSRC Dedicated Short Range Communication
ICS Implementation Conformance Statement
ITS Intelligent Transport System
ITS-G5 Acronym for the 5,9 GHz vehicular ad-hoc network
ITS-S ITS Station
IUT Implementation Under Test
OBU On Board Unit
OSI Open Systems Interconnection
PDU Protocol Data Unit
PICS Protocol Implementation Conformance Statement
RSU Road Side Unit
SUT System under Test
TP Test Purpos
...