Telecommunications and Internet converged Services and Protocols for Advanced Networking (TISPAN); IMS NNI Interworking Test Specifications; Part 2: Test Descriptions for IMS NNI Interworking

RTS/TISPAN-06033-2-NGN-R1

General Information

Status
Published
Publication Date
09-Feb-2009
Technical Committee
Current Stage
12 - Completion
Due Date
23-Dec-2008
Completion Date
10-Feb-2009
Ref Project

Buy Standard

Standard
ETSI TS 186 011-2 V2.1.1 (2009-02) - Telecommunications and Internet converged Services and Protocols for Advanced Networking (TISPAN); IMS NNI Interworking Test Specifications; Part 2: Test Descriptions for IMS NNI Interworking
English language
118 pages
sale 15% off
Preview
sale 15% off
Preview

Standards Content (Sample)

ETSI TS 186 011-2 V2.1.1 (2009-02)
Technical Specification


Telecommunications and Internet converged Services and
Protocols for Advanced Networking (TISPAN);
IMS NNI Interworking Test Specifications;
Part 2: Test Descriptions for IMS NNI Interworking

---------------------- Page: 1 ----------------------
2 ETSI TS 186 011-2 V2.1.1 (2009-02)



Reference
RTS/TISPAN-06033-2-NGN-R1
Keywords
IMS, interworking, NNI, testing
ETSI
650 Route des Lucioles
F-06921 Sophia Antipolis Cedex - FRANCE

Tel.: +33 4 92 94 42 00  Fax: +33 4 93 65 47 16

Siret N° 348 623 562 00017 - NAF 742 C
Association à but non lucratif enregistrée à la
Sous-Préfecture de Grasse (06) N° 7803/88

Important notice
Individual copies of the present document can be downloaded from:
http://www.etsi.org
The present document may be made available in more than one electronic version or in print. In any case of existing or
perceived difference in contents between such versions, the reference version is the Portable Document Format (PDF).
In case of dispute, the reference shall be the printing on ETSI printers of the PDF version kept on a specific network drive
within ETSI Secretariat.
Users of the present document should be aware that the document may be subject to revision or change of status.
Information on the current status of this and other ETSI documents is available at
http://portal.etsi.org/tb/status/status.asp
If you find errors in the present document, please send your comment to one of the following services:
http://portal.etsi.org/chaircor/ETSI_support.asp
Copyright Notification
No part may be reproduced except as authorized by written permission.
The copyright and the foregoing restriction extend to reproduction in all media.

© European Telecommunications Standards Institute 2009.
All rights reserved.

TM TM TM TM
DECT , PLUGTESTS , UMTS , TIPHON , the TIPHON logo and the ETSI logo are Trade Marks of ETSI registered
for the benefit of its Members.
TM
3GPP is a Trade Mark of ETSI registered for the benefit of its Members and of the 3GPP Organizational Partners.
LTE™ is a Trade Mark of ETSI currently being registered
for the benefit of its Members and of the 3GPP Organizational Partners.
GSM® and the GSM logo are Trade Marks registered and owned by the GSM Association.
ETSI

---------------------- Page: 2 ----------------------
3 ETSI TS 186 011-2 V2.1.1 (2009-02)
Contents
Intellectual Property Rights.6
Foreword.6
1 Scope.7
2 References.7
2.1 Normative references.7
2.2 Informative references.8
3 Abbreviations.9
4 IMS NNI Interoperability Test Specification.9
4.1 Introduction.9
4.2 Test Prerequisites.10
4.2.1 IP Version.10
4.2.2 Authentication and Security.10
4.2.3 Registration and Subscription.10
4.2.3.1 SIP Call Flow.10
4.2.3.1.1 Early IMS Registration and Subscription Call Flow .10
4.2.3.1.2 Full IMS Registration and Subscription Call Flow .11
4.2.3.1.3 SIP Digest Registration and Subscription Call Flow.12
4.2.4 Supported Options .12
4.2.4.1 Security.12
4.2.4.2 Signalling Compression.12
4.3 Test Infrastructure.12
4.3.1 Core IMS Nodes .12
4.3.1.1 P-CSCF.13
4.3.1.1.1 Relevant Interfaces.13
4.3.1.1.2 Node Configuration.13
4.3.1.2 S-CSCF.13
4.3.1.2.1 Relevant Interfaces.13
4.3.1.2.2 Node Configuration.13
4.3.1.3 I-CSCF.13
4.3.1.3.1 Relevant Interfaces.13
4.3.1.3.2 Node Configuration.13
4.3.1.4 IBCF.13
4.3.1.4.1 Node Configuration.13
4.3.1.4.2 Relevant Interfaces.14
4.3.1.5 HSS.14
4.3.1.5.1 Relevant Interfaces.14
4.3.1.5.2 Node Configuration.14
4.3.2 External IMS Nodes.14
4.3.2.1 UE.14
4.3.2.1.1 Relevant Interfaces.14
4.3.2.1.2 Node Configuration.14
4.3.2.2 AS.15
4.3.2.2.1 Relevant Interfaces.15
4.3.2.2.2 Node Configuration.15
4.3.3 Supporting IMS Nodes .15
4.3.3.1 DNS.15
4.3.3.1.1 Relevant Interfaces.15
4.3.3.1.2 Node Configuration.15
4.3.4 Test Configurations.15
4.4 Use Cases.20
4.4.1 IMS Registration in a Visited Network.20
4.4.1.1 Description.20
4.4.1.2 UC_01_R: SIP message flow for IMS registration with CF ROAM .21
4.4.2 User-initiated VoIP call setup and release .21
ETSI

---------------------- Page: 3 ----------------------
4 ETSI TS 186 011-2 V2.1.1 (2009-02)
4.4.2.1 Normal Call.21
4.4.2.1.1 Description.21
4.4.2.1.2 UC_02_I: SIP Call Flow "Normal Call" with CF_INT_CALL.23
4.4.2.1.3 UC_02_R: SIP Call Flow "Normal Call" with CF_ROAM_CALL .24
4.4.3 User-initiated call hold and resume .27
4.4.3.1 User-initiated call hold and resume using reINVITE.27
4.4.3.1.1 Description.27
4.4.3.1.2 UC_03_I: SIP Call Flow "call hold and resume" using reINVITE with CF_INT_CALL.28
4.4.3.1.3 UC_03_R: SIP Call Flow "call hold and resume" using reINVITE with CF_ROAM_CALL.30
4.4.3.2 User-initiated call hold and resume using UPDATE .33
4.4.3.2.1 Description.33
4.4.3.2.2 UC_04_I: SIP Call Flow "call hold and resume" using UPDATE with CF_INT_CALL .34
4.4.3.2.3 UC_04_R: SIP Call Flow "call hold and resume" using UPDATE with CF_ROAM_CALL.35
4.4.4 IMS message exchange between UEs in different networks .37
4.4.4.1 Description.37
4.4.4.2 UC_05_I: SIP Call flow for IMS Message Exchange with CF_INT_CALL.38
4.4.4.3 UC_05_R: SIP Call Flow for IMS Message Exchange with CF_ROAM_CALL .38
4.4.5 Supplementary Service Anonymous Communication Rejection (ACR) .38
4.4.5.1 Description.38
4.4.5.2 UC_06_R: SIP message flow for SS ACR with CF_ROAM_AS.39
4.4.6 Supplementary Service Outgoing Communication Barring (OCB).39
4.4.6.1 Description.39
4.4.6.2 UC_07_R: SIP message flow for SS OCB with CF_ROAM_AS.40
4.4.7 Supplementary Service Originating Identification Presentation (OIP).40
4.4.7.1 Description.40
4.4.7.2 UC_08_R: SIP message flow for SS OIP with CF_ROAM_AS.41
4.4.8 Supplementary Service Originating Identification Restriction (OIR).42
4.4.8.1 Description.42
4.4.8.2 UC_09_R: SIP message flow for SS OIR with CF_ROAM_AS .43
4.4.9 Supplementary Service HOLD.44
4.4.9.1 Description.44
4.4.9.1.1 UC_10_R: SIP Call Flow "call hold and resume with AS tones and/or announcements" using
reINVITE with CF_ROAM_AS.45
4.4.10 Supplementary Service Call Forward Unconditional (CFU) .47
4.4.10.1 Description.47
4.4.10.1.1 UC_11_R: SIP Call Flow "Communication Forwarding unconditional" with CF_ROAM_AS .48
4.5 Test Descriptions.49
4.5.1 General Capabilities.50
4.5.1.1 SIP messages longer than 1 500 bytes.50
4.5.2 Registration and De-registration.51
4.5.2.1 First time registration in a visited IMS network.51
4.5.2.2 Multiple entry points, no response from first entry point on REGISTER.54
4.5.2.3 403 response to REGISTER from an un-trusted domain .56
4.5.2.4 Network initiated deregistration upon receipt of a new registration with new contact information.57
4.5.2.5 Network initiated deregistration by the S-CSCF.59
4.5.2.6 Network initiated re-authentication by the S-CSCF.61
4.5.2.7 First time registration in a visited IMS network requiring Topology Hiding.63
4.5.3 Initial Dialog or Standalone Procedures .65
4.5.3.1 Initial INVITE Dialog Procedures .65
4.5.3.1.1 Initial INVITE Request Procedures - Originating .65
4.5.3.1.2 Dialogue Procedures with Roaming .76
4.5.3.1.3 Subsequent Request Procedures - Originating Network.88
4.5.3.1.4 Subsequent Request Procedures - Terminating Network .98
4.5.3.1.5 Dialogue Procedures - Topology Hiding.100
4.5.4 Messaging.107
4.5.4.1 Messaging with SIP URI public identities .107
4.5.4.2 Messaging with TEL URI identities.109
4.5.4.3 Messaging with DNS/ENUM lookup procedure.111
4.5.4.4 Messaging when roaming.113
4.5.4.5 Messaging with receiving user not registered .114
4.5.4.6 Messaging with receiving user barred.115
4.5.5 Supplementary Services.117
ETSI

---------------------- Page: 4 ----------------------
5 ETSI TS 186 011-2 V2.1.1 (2009-02)
4.5.5.1 Supplementary Service HOLD with AS .117
History .120

ETSI

---------------------- Page: 5 ----------------------
6 ETSI TS 186 011-2 V2.1.1 (2009-02)
Intellectual Property Rights
IPRs essential or potentially essential to the present document may have been declared to ETSI. The information
pertaining to these essential IPRs, if any, is publicly available for ETSI members and non-members, and can be found
in ETSI SR 000 314: "Intellectual Property Rights (IPRs); Essential, or potentially Essential, IPRs notified to ETSI in
respect of ETSI standards", which is available from the ETSI Secretariat. Latest updates are available on the ETSI Web
server (http://webapp.etsi.org/IPR/home.asp).
Pursuant to the ETSI IPR Policy, no investigation, including IPR searches, has been carried out by ETSI. No guarantee
can be given as to the existence of other IPRs not referenced in ETSI SR 000 314 (or the updates on the ETSI Web
server) which are, or may be, or may become, essential to the present document.
Foreword
This Technical Specification (TS) has been produced by ETSI Technical Committee Telecommunications and Internet
converged Services and Protocols for Advanced Networking (TISPAN).
The present document is part 2 of a multi-part deliverable covering the IMS NNI Interworking Test Specifications, as
identified below:
Part 1: "Test Purposes for IMS NNI Interworking";
Part 2: "Test Descriptions for IMS NNI Interworking".
ETSI

---------------------- Page: 6 ----------------------
7 ETSI TS 186 011-2 V2.1.1 (2009-02)
1 Scope
The present document specifies interoperability Test Descriptions (TDs) for IMS NNI interoperability testing for the IP
Multimedia Call Control Protocol based on Stage 3 Session Initiation Protocol (SIP) and Session Description Protocol
(SDP) standard, TS 124 229 Release 7 [1]. TDs have been specified on the basis of the Test Purposes (TPs) and Test
Suite Structure (TSS) presented in TS 124 229 [1]. TP fragments presented in the present document as part of TDs are
defined using the TPLan notation of ES 202 553 [5]. TDs have been written based on the test specification framework
described in TS 102 351 [3] and the interoperability testing methodology defined in TS 102 237-1 [4],
i.e. interoperability testing with a conformance relation.
For the assessment of IMS core network requirements related to the ISC interface parts of the supplementary services
HOLD (TS 124 410 [10]), CDIV (TS 124 404 [11]), ACR-CB (TS 124 411 [12]) and OIP/OIR (TS 124 407 [13]) have
been used.
The scope of these test descriptions is not to cover all requirements specified in TS 124 229 [1]. TDs have been only
specified for requirements that are observable at the interface between two IMS core network implementations, i.e. IMS
NNI.
NOTE: Requirements pertaining to a UE or an AS implementation or IMS core network requirements that can
only be observed at the interface between UE and IMS CN are explicitly not within the scope of the
present document. The latter requirements have been dealt with from a UE and conformance perspective
in TS 134 229 [6].
2 References
References are either specific (identified by date of publication and/or edition number or version number) or
non-specific.
• For a specific reference, subsequent revisions do not apply.
• Non-specific reference may be made only to a complete document or a part thereof and only in the following
cases:
- if it is accepted that it will be possible to use all future changes of the referenced document for the
purposes of the referring document;
- for informative references.
Referenced documents which are not found to be publicly available in the expected location might be found at
http://docbox.etsi.org/Reference.
NOTE: While any hyperlinks included in this clause were valid at the time of publication ETSI cannot guarantee
their long term validity.
2.1 Normative references
The following referenced documents are indispensable for the application of the present document. For dated
references, only the edition cited applies. For non-specific references, the latest edition of the referenced document
(including any amendments) applies.
[1] ETSI TS 124 229:" Digital cellular telecommunications system (Phase 2+); Universal Mobile
Telecommunications System (UMTS); Internet Protocol (IP) multimedia call control protocol
based on Session Initiation Protocol (SIP) and Session Description Protocol (SDP); Stage 3
(3GPP TS 24.229 version 7.2.0 Release 7)".
[2] ETSI TS 186 011-1 (V2.1.1): "Telecommunications and Internet converged Services and Protocols
for Advanced Networking (TISPAN); IMS NNI Interworking Test Specifications; Part 1: Test
Purposes for IMS NNI Interworking".
ETSI

---------------------- Page: 7 ----------------------
8 ETSI TS 186 011-2 V2.1.1 (2009-02)
[3] ETSI TS 102 351: "Methods for Testing and Specification (MTS); Internet Protocol Testing (IPT);
IPv6 Testing: Methodology and Framework".
[4] ETSI TS 102 237-1: "Telecommunications and Internet Protocol Harmonization Over Networks
(TIPHON) Release 4; Interoperability test methods and approaches; Part 1: Generic approach to
interoperability testing".
[5] ETSI ES 202 553: "Methods for Testing and Specification (MTS); TPLan: A notation for
expressing Test Purposes".
[6] ETSI TS 134 229: "Universal Mobile Telecommunications System (UMTS); Internet Protocol (IP)
multimedia call control protocol based on Session Initiation Protocol (SIP) and Session
Description Protocol (SDP); Part 1: Protocol conformance specification (3GPP TS 34.229-1
version 7.0.0 Release 7)".
[7] ETSI TS 133 203: "Digital cellular telecommunications system (Phase 2+); Universal Mobile
Telecommunications System (UMTS); 3G security; Access security for IP-based services
(3GPP TS 33.203 version 6.10.0 Release 6)".
[8] IETF RFC 2617: "HTTP Authentication: Basic and Digest Access Authentication".
[9] IETF RFC 2806: "URLs for Telephone Calls".
[10] ETSI TS 124 410: "Digital cellular telecommunications system (Phase 2+); Universal Mobile
Telecommunications System (UMTS); TISPAN; NGN Signalling Control Protocol;
Communication HOLD (HOLD) PSTN/ISDN simulation services; Protocol specification
(3GPP TS 24.410 version 7.0.0 Release 7)".
[11] ETSI TS 124 404: "Digital cellular telecommunications system (Phase 2+); Universal Mobile
Telecommunications System (UMTS); TISPAN; PSTN/ISDN simulation services:
Communication Diversion (CDIV); Protocol specification (3GPP TS 24.404 version 7.0.0
Release 7)".
[12] ETSI TS 124 411: "Digital cellular telecommunications system (Phase 2+); Universal Mobile
Telecommunications System (UMTS); TISPAN; PSTN/ISDN simulation services: Anonymous
Communication Rejection (ACR) and Communication Barring (CB); Protocol specification
(3GPP TS 24.411 version 7.0.0 Release 7)".
[13] ETSI TS 124 407: "Digital cellular telecommunications system (Phase 2+); Universal Mobile
Telecommunications System (UMTS); TISPAN; PSTN/ISDN simulation services; Originating
Identification Presentation (OIP) and Originating Identification Restriction (OIR); Protocol
specification (3GPP TS 24.407 version 7.0.0 Release 7)".
2.2 Informative references
The following referenced documents are not essential to the use of the present document but they assist the user with
regard to a particular subject area. For non-specific references, the latest version of the referenced document (including
any amendments) applies.
[i.1] ETSI TR 133 978: "Universal Mobile Telecommunications System (UMTS); Security aspects of
early IP Multimedia Subsystem (IMS) (3GPP TR 33.978 version 6.6.0 Release 6)".
[i.2] ETSI TR 123 981: "Universal Mobile Telecommunications System (UMTS); Interworking aspects
and migration scenarios for IPv4-based IP Multimedia Subsystem (IMS) implementations
(3GPP TR 23.981 version 6.4.0 Release 6)".
ETSI

---------------------- Page: 8 ----------------------
9 ETSI TS 186 011-2 V2.1.1 (2009-02)
3 Abbreviations
For the purposes of the present document, the following abbreviations apply:
rd
3GPP 3 Generation Partnership Project
ACR Anonymous Communication Rejection
AKA Authentication and Key Agreement
AS (IMS) Application Server
CB Call Barring
CDIV Call DIVersion
CF (Test) Configuration
CFW Call Flow
CN Core Network
CSCF Call Session Control Function
DHCP Dynamic Host Configuration Protocol
DNS Domain Name System
HOLD Communication HOLD
HSS Home Subscriber Server
IBCF Interconnection Border Control Gateway
I-CSCF Interrogating CSCF
IMS IP Multimedia Subsystem
IOI Inter Operator Identifier
IP Internet Protocol
IPsec Internet Protocol Security
ISC IMS Service Control
NNI Network-to-Network Interface
OIP Originating Identification Presentation
OIR Originating Identification Restriction
PCO Point of Control and Observation
P-CSCF Proxy CSCF
PO Point of Observation
PSTN Public Switched Telephone Network
SA Security Association
S-CSCF Serving CSCF
SDP Session Description Protocol
SIP Session Initiation Protocol
SUT System Under Test
TCP Transmission Control Protocol
TD Test Description
TISPAN Telecommunications and Internet converged Services and Protocols for Advanced Networking
TP Test Purpose
TPLan Test Purpose Notation
TSS Test Suite Structure
UC Use Case
UE User Equipment
URI Uniform Record Identifier
VoIP Voice over Internet Protocol
XML eXtensible Markup Language
4 IMS NNI Interoperability Test Specification
4.1 Introduction
The IMS NNI Interoperability Test Descriptions (TDs) defined in the following clauses are derived from the Test
Purposes (TPs) specified in TS 186 011-1 [2]. The TDs cover both basic call procedures such as call establishment and
call release and a selection of the most common supplementary services.
ETSI

---------------------- Page: 9 ----------------------
10 ETSI TS 186 011-2 V2.1.1 (2009-02)
4.2 Test Prerequisites
4.2.1 IP Version
These test specifications are based on the use of IPv4 for SIP message transport throu
...

Questions, Comments and Discussion

Ask us and Technical Secretary will try to provide an answer. You can facilitate discussion about the standard in here.