ETSI TS 126 132 V15.1.0 (2018-10)

Universal Mobile Telecommunications System (UMTS); LTE; Speech and video telephony terminal acoustic test specification (3GPP TS 26.132 version 15.1.0 Release 15)

RTS/TSGS-0426132vf10

General Information

• Status: Published
• Publication Date: 07-Oct-2018
• Technical Committee: 3GPP SA 4 - Codec
• Current Stage: 12 - Completion
• Completion Date: 08-Oct-2018

Standards Content (Sample)

ETSI TS 126 132 V15.1.0 (2018-10)






TECHNICAL SPECIFICATION
Universal Mobile Telecommunications System (UMTS);
LTE;
Speech and video telephony terminal acoustic test
specification
(3GPP TS 26.132 version 15.1.0 Release 15)



---------------------- Page: 1 ----------------------
3GPP TS 26.132 version 15.1.0 Release 15 1 ETSI TS 126 132 V15.1.0 (2018-10)



Reference
RTS/TSGS-0426132vf10
Keywords
LTE,UMTS
ETSI
650 Route des Lucioles
F-06921 Sophia Antipolis Cedex - FRANCE

Tel.: [phone]  Fax: [phone]

Siret N° 348 623 562 00017 - NAF 742 C
Association à but non lucratif enregistrée à la
Sous-Préfecture de Grasse (06) N° 7803/88

Important notice
The present document can be downloaded from:
http://www.etsi.org/standards-search
The present document may be made available in electronic versions and/or in print. The content of any electronic and/or
print versions of the present document shall not be modified without the prior written authorization of ETSI. In case of any
existing or perceived difference in contents between such versions and/or in print, the only prevailing document is the
print of the Portable Document Format (PDF) version kept on a specific network drive within ETSI Secretariat.
Users of the present document should be aware that the document may be subject to revision or change of status.
Information on the current status of this and other ETSI documents is available at
https://portal.etsi.org/TB/ETSIDeliverableStatus.aspx
If you find errors in the present document, please send your comment to one of the following services:
https://portal.etsi.org/People/CommiteeSupportStaff.aspx
Copyright Notification
No part may be reproduced or utilized in any form or by any means, electronic or mechanical, including photocopying
and microfilm except as authorized by written permission of ETSI.
The content of the PDF version shall not be modified without the written authorization of ETSI.
The copyright and the foregoing restriction extend to reproduction in all media.

© ETSI 2018.
All rights reserved.

TM TM TM
DECT , PLUGTESTS , UMTS and the ETSI logo are trademarks of ETSI registered for the benefit of its Members.
TM TM
3GPP and LTE are trademarks of ETSI registered for the benefit of its Members and
of the 3GPP Organizational Partners.
oneM2M logo is protected for the benefit of its Members.
®
GSM and the GSM logo are trademarks registered and owned by the GSM Association.
ETSI

---------------------- Page: 2 ----------------------
3GPP TS 26.132 version 15.1.0 Release 15 2 ETSI TS 126 132 V15.1.0 (2018-10)
Intellectual Property Rights
Essential patents
IPRs essential or potentially essential to normative deliverables may have been declared to ETSI. The information
pertaining to these essential IPRs, if any, is publicly available for ETSI members and non-members, and can be found
in ETSI SR 000 314: "Intellectual Property Rights (IPRs); Essential, or potentially Essential, IPRs notified to ETSI in
respect of ETSI standards", which is available from the ETSI Secretariat. Latest updates are available on the ETSI Web
server (https://ipr.etsi.org/).
Pursuant to the ETSI IPR Policy, no investigation, including IPR searches, has been carried out by ETSI. No guarantee
can be given as to the existence of other IPRs not referenced in ETSI SR 000 314 (or the updates on the ETSI Web
server) which are, or may be, or may become, essential to the present document.
Trademarks
The present document may include trademarks and/or tradenames which are asserted and/or registered by their owners.
ETSI claims no ownership of these except for any which are indicated as being the property of ETSI, and conveys no
right to use or reproduce any trademark and/or tradename. Mention of those trademarks in the present document does
not constitute an endorsement by ETSI of products, services or organizations associated with those trademarks.
Foreword
This Technical Specification (TS) has been produced by ETSI 3rd Generation Partnership Project (3GPP).
The present document may refer to technical specifications or reports using their 3GPP identities, UMTS identities or
GSM identities. These should be interpreted as being references to the corresponding ETSI deliverables.
The cross reference between GSM, UMTS, 3GPP and ETSI identities can be found under
http://webapp.etsi.org/key/queryform.asp.
Modal verbs terminology
In the present document "shall", "shall not", "should", "should not", "may", "need not", "will", "will not", "can" and
"cannot" are to be interpreted as described in clause 3.2 of the ETSI Drafting Rules (Verbal forms for the expression of
provisions).
"must" and "must not" are NOT allowed in ETSI deliverables except when used in direct citation.
ETSI

---------------------- Page: 3 ----------------------
3GPP TS 26.132 version 15.1.0 Release 15 3 ETSI TS 126 132 V15.1.0 (2018-10)
Contents
Intellectual Property Rights . 2
Foreword . 2
Modal verbs terminology . 2
Foreword . 9
Introduction . 9
1 Scope . 10
2 References . 10
3 Definitions, symbols and abbreviations . 12
3.1 Definitions . 12
3.2 Abbreviations . 12
4 Interfaces . 13
5 Test configurations . 14
5.1 Setup for terminals . 14
5.1.1 Setup for handset terminals . 15
5.1.2 Setup for headset terminals . 15
5.1.3 Setup for hands-free terminals . 16
5.1.3.1 Vehicle-mounted hands-free . 16
5.1.3.2 Desktop hands-free. 17
5.1.3.3 Hand-held hands-free . 17
5.1.3.4 Softphone including speakers and microphone . 18
5.1.3.5 Softphone with separate speakers . 20
5.1.4 Position and calibration of HATS . 24
5.1.5 Test setup for quality in the presence of ambient noise measurements . 24
5.1.5.1 Handset . 24
5.1.5.2 Hand-held hands-free . 25
5.2 Setup of the electrical interfaces . 27
5.2.1 Codec approach and specification. 27
5.2.2 Direct digital processing approach . 28
5.3 Accuracy of test equipment . 29
5.4 Test signals . 30
5.5 Void . 31
5.5.1 Void . 31
5.5.2 Void . 31
6 Test conditions . 31
6.1 Environmental conditions . 31
6.1.1 Handset and headset terminals . 31
6.1.2 Hands-free terminals . 31
6.2 System simulator conditions. 32
7 Narrowband telephony transmission performance test methods . 32
7.1 Applicability . 32
7.2 Overall loss/loudness ratings . 32
7.2.1 General . 32
7.2.2 Connections with handset UE . 33
7.2.2.1 Sending loudness rating (SLR) . 33
7.2.2.2 Receiving loudness rating (RLR) . 33
7.2.2.3 Receiving loudness rating (RLR) in the presence of background noise . 33
7.2.3 Connections with desktop and vehicle-mounted hands-free UE. 34
7.2.3.1 Sending loudness rating (SLR) . 34
7.2.3.2 Receiving Loudness Rating (RLR) . 35
7.2.4 Connections with hand-held hands-free UE . 35
7.2.4.1 Sending loudness rating (SLR) . 35
7.2.4.2 Receiving loudness rating (RLR) . 35
ETSI

---------------------- Page: 4 ----------------------
3GPP TS 26.132 version 15.1.0 Release 15 4 ETSI TS 126 132 V15.1.0 (2018-10)
7.2.5 Connections with headset UE . 36
7.3 Idle channel noise (handset and headset UE) . 36
7.3.1 Sending . 36
7.3.2 Receiving . 36
7.4 Sensitivity/frequency characteristics . 37
7.4.1 Handset and headset UE sending . 37
7.4.2 Handset and headset UE receiving . 37
7.4.3 Desktop and vehicle-mounted hands-free UE sending . 37
7.4.4 Desktop and vehicle-mounted hands-free UE receiving . 38
7.4.5 Hand-held hands-free UE sending . 38
7.4.6 Hand-held hands-free UE receiving . 38
7.5 Sidetone characteristics . 39
7.5.1 Connections with handset UE . 39
7.5.1.1 void . 39
7.5.1.2 Connections with handset UE – HATS method . 39
7.5.2 Headset UE . 39
7.5.3 Hands-free UE (all categories) . 40
7.5.4 Sidetone delay for handset or headset . 40
7.6 Stability loss . 40
7.7 Acoustic echo control . 41
7.7.1 General . 41
7.7.2 Acoustic echo control in a hands-free UE . 41
7.7.3 Acoustic echo control in handset UE . 42
7.7.4 Acoustic echo control in a headset UE . 42
7.8 Distortion . 42
7.8.1 Sending distortion . 42
7.8.2 Receiving . 43
7.9 Void . 44
7.10 Delay . 45
7.10.0 UE Delay Measurement Methodologies . 45
7.10.1 Delay in sending direction (Handset UE) . 45
7.10.1a Delay in sending direction (headset UE) . 46
7.10.2 Delay in receiving direction (handset UE) . 46
7.10.2a Delay in receiving direction (headset UE) . 47
7.10.3 Delay in sending + receiving direction using "echo" method (handset UE) . 48
7.10.3a Delay in sending + receiving direction using "echo" method (headset UE) . 49
7.10.4 Delay and speech quality in conditions with packet arrival time variations and packet loss . 49
7.10.4.1 Delay in sending direction . 49
7.10.4.2 Delay in receiving direction . 49
7.10.4.3 Speech quality loss in conditions with packet arrival time variations and packet loss . 50
7.10.5 UE send clock accuracy . 51
7.10.6 UE receiving with clock skew . 51
7.11 Echo control characteristics . 51
7.11.1 Test set-up and test signals . 51
7.11.2 Test method . 52
7.11.2.1 Signal alignment . 53
7.11.2.2 Signal level computation and frame classification . 53
7.11.2.3 Classification into categories . 54
7.12 Quality (speech quality, noise intrusiveness) in the presence of ambient noise . 54
7.12.1 Handset . 54
7.12.2 Hand-held hands-free . 56
7.13 Jitter buffer management behaviour . 57
7.13.0 General . 57
7.13.1 Delay histogram . 57
7.13.2 Speech quality loss histogram . 58
8 Wideband telephony transmission performance test methods . 59
8.1 Applicability . 59
8.2 Overall loss/loudness ratings . 59
8.2.1 General . 59
8.2.2 Connections with handset UE . 59
8.2.2.1 Sending loudness rating (SLR) . 59
ETSI

---------------------- Page: 5 ----------------------
3GPP TS 26.132 version 15.1.0 Release 15 5 ETSI TS 126 132 V15.1.0 (2018-10)
8.2.2.2 Receiving loudness rating (RLR) . 59
8.2.2.3 Receiving loudness rating (RLR) in the presence of background noise . 60
8.2.3 Connections with desktop and vehicle-mounted hands-free UE. 60
8.2.3.1 Sending loudness rating (SLR) . 60
8.2.3.2 Receiving loudness rating (RLR) . 61
8.2.4 Connections with hand-held hands-free UE . 61
8.2.4.1 Sending loudness rating (SLR) . 61
8.2.4.2 Receiving loudness rating (RLR) . 61
8.2.5 Connections with headset UE . 62
8.3 Idle channel noise (handset and headset UE) . 62
8.3.1 Sending . 62
8.3.2 Receiving . 62
8.4 Sensitivity/frequency characteristics . 63
8.4.1 Handset and headset UE sending . 63
8.4.2 Handset and headset UE receiving . 63
8.4.3 Desktop and vehicle-mounted hands-free UE sending . 63
8.4.4 Desktop and vehicle-mounted hands-free UE receiving . 64
8.4.5 Hand-held hands-free UE sending . 64
8.4.6 Hand-held hands-free UE receiving . 64
8.5 Sidetone characteristics . 65
8.5.1 Connections with handset UE . 65
8.5.2 Headset UE . 65
8.5.3 Hands-free UE (all categories) . 65
8.5.4 Sidetone delay for handset or headset . 65
8.6 Stability loss . 66
8.7 Acoustic echo control . 67
8.7.1 General . 67
8.7.2 Acoustic echo control in a hands-free UE . 67
8.7.3 Acoustic echo control in a handset UE . 68
8.7.4 Acoustic echo control in a headset UE . 68
8.8 Distortion . 68
8.8.1 Sending distortion . 68
8.8.2 Receiving . 69
8.9 Void . 70
8.10 Delay . 71
8.10.0 UE Delay Measurement Methodologies . 71
8.10.1 Delay in sending direction (handset UE) . 71
8.10.1a Delay in sending direction (headset UE) . 72
8.10.2 Delay in receiving direction (handset UE) . 72
8.10.2a Delay in receiving direction (headset UE) . 74
8.10.3 Delay in sending + receiving direction using "echo" method (handset UE) . 74
8.10.3a Delay in sending + receiving direction using "echo" method (headset UE) . 76
8.10.4 Delay and speech quality in conditions with packet arrival time variations and packet loss . 76
8.10.4.1 Delay in sending direction . 76
8.10.4.2 Delay in receiving direction . 76
8.10.4.3
...