ETSI TS 102 486-2-1 V1.2.1 (2008-10)

Intelligent Transport Systems (ITS); Road Transport and Traffic Telematics (RTTT); Test specifications for Dedicated Short Range Communication (DSRC) transmission equipment; Part 2: DSRC application layer; Sub-Part 1: Protocol Implementation Conformance Statement (PICS) proforma specification

RTS/ITS-0040008

General Information

• Status: Published
• Publication Date: 05-Oct-2008
• Technical Committee: ITS WG4 - Media and Medium related
• Current Stage: 12 - Completion
• Due Date: 27-Aug-2008
• Completion Date: 06-Oct-2008
• Mandate: M/270
• Mandate: M/338

Standards Content (Sample)

ETSI TS 102 486-2-1 V1.2.1 (2008-10)
Technical Specification

Intelligent Transport Systems (ITS);
Road Transport and Traffic Telematics (RTTT);
Test specifications for Dedicated Short
Range Communication (DSRC) transmission equipment;
Part 2: DSRC application layer;
Sub-Part 1: Protocol Implementation Conformance
Statement (PICS) proforma specification

---------------------- Page: 1 ----------------------
2 ETSI TS 102 486-2-1 V1.2.1 (2008-10)



Reference
RTS/ITS-0040008
Keywords
ITS, DSRC, application, PICS, testing
ETSI
650 Route des Lucioles
F-06921 Sophia Antipolis Cedex - FRANCE

Tel.: [phone]  Fax: [phone]

Siret N° 348 623 562 00017 - NAF 742 C
Association à but non lucratif enregistrée à la
Sous-Préfecture de Grasse (06) N° 7803/88

Important notice
Individual copies of the present document can be downloaded from:
http://www.etsi.org
The present document may be made available in more than one electronic version or in print. In any case of existing or
perceived difference in contents between such versions, the reference version is the Portable Document Format (PDF).
In case of dispute, the reference shall be the printing on ETSI printers of the PDF version kept on a specific network drive
within ETSI Secretariat.
Users of the present document should be aware that the document may be subject to revision or change of status.
Information on the current status of this and other ETSI documents is available at
http://portal.etsi.org/tb/status/status.asp
If you find errors in the present document, please send your comment to one of the following services:
http://portal.etsi.org/chaircor/ETSI_support.asp
Copyright Notification
No part may be reproduced except as authorized by written permission.
The copyright and the foregoing restriction extend to reproduction in all media.

© European Telecommunications Standards Institute 2008.
All rights reserved.

TM TM TM TM
DECT , PLUGTESTS , UMTS , TIPHON , the TIPHON logo and the ETSI logo are Trade Marks of ETSI registered
for the benefit of its Members.
TM
3GPP is a Trade Mark of ETSI registered for the benefit of its Members and of the 3GPP Organizational Partners.
ETSI

---------------------- Page: 2 ----------------------
3 ETSI TS 102 486-2-1 V1.2.1 (2008-10)
Contents
Intellectual Property Rights . 6
Foreword . 6
1 Scope . 7
2 References . 7
2.1 Normative references . 7
2.2 Informative references . 8
3 Definitions and abbreviations . 8
3.1 Definitions . 8
3.2 Abbreviations . 8
4 Overview of the templates . 9
5 Conformance requirement concerning PICS . 9
Annex A (normative): ICS proforma for DSRC application layer for OBU . 10
A.1 Guidance for completing the PICS proforma . 10
A.1.1 Purposes and structure . 10
A.1.2 Abbreviations and conventions . 10
A.1.3 Instructions for completing the PICS proforma. 12
A.2 Identification of the implementation . 12
A.2.1 Date of the statement . 12
A.2.2 Implementation Under Test (IUT) identification . 12
A.2.3 System Under Test (SUT) identification . 13
A.2.4 Product supplier . 13
A.2.5 Client (if different from product supplier) . 13
A.2.6 PICS contact person . 14
A.3 Identification of the protocol . 14
A.4 Global statement of conformance . 15
A.5 Kernels . 15
A.6 Initialization Kernel . 15
A.6.1 Procedures . 15
A.6.2 PDU . 15
A.7 Transport Kernel . 16
A.7.1 Procedures . 16
A.7.2 PDU . 17
A.8 Broadcast Kernel . 20
A.8.1 Procedures . 20
A.8.2 PDU . 20
A.9 ASN.1 Data Types . 21
A.9.1 Extendable data types . 21
A.9.2 Extendable lists . 21
Annex B (normative): ICS proforma for DSRC application layer for RSU . 22
B.1 Guidance for completing the PICS proforma . 22
B.1.1 Purposes and structure . 22
B.1.2 Abbreviations and conventions . 22
B.1.3 Instructions for completing the PICS proforma. 24
B.2 Identification of the implementation . 24
B.2.1 Date of the statement . 24
ETSI

---------------------- Page: 3 ----------------------
4 ETSI TS 102 486-2-1 V1.2.1 (2008-10)
B.2.2 Implementation Under Test (IUT) identification . 24
B.2.3 System Under Test (SUT) identification . 25
B.2.4 Product supplier . 25
B.2.5 Client (if different from product supplier) . 25
B.2.6 PICS contact person . 26
B.3 Identification of the protocol . 26
B.4 Global statement of conformance . 27
B.5 Kernels . 27
B.6 Initialization Kernel . 27
B.6.1 Procedures . 27
B.6.2 PDU . 27
B.7 Transport Kernel . 28
B.7.1 Procedures . 28
B.7.2 PDU . 29
B.8 Broadcast Kernel . 32
B.8.1 Procedures . 32
B.8.2 PDU . 32
B.9 ASN.1 Data Types . 33
B.9.1 Extendable data types . 33
B.9.2 Extendable lists . 33
Annex C (normative): Profile Requirement List for RTTT profile of DSRC application
layer for OBU . 34
C.1 General . 34
C.1.1 Profile Requirement List (profile RL) . 34
C.2 Identification of the profile . 34
C.3 Kernels . 35
C.4 Initialization Kernel . 35
C.5 Transport Kernel . 35
C.5.1 PDU . 35
C.6 ASN.1 Data Types . 36
C.6.1 Extendable data types . 36
C.6.2 Extendable lists . 36
Annex D (normative): Profile Requirement List for RTTT profile of DSRC application
layer for RSU . 37
D.1 General . 37
D.1.1 Profile Requirement List (profile RL) . 37
D.2 Identification of the profile . 37
D.3 Kernels . 38
D.4 Initialization Kernel . 38
D.5 Transport Kernel . 38
D.5.1 PDU . 38
D.6 ASN.1 Data Types . 39
D.6.1 Extendable data types . 39
D.6.2 Extendable lists . 39
Annex E (normative): Profile specific ICS proforma for RTTT profile of DSRC application
layer for OBU . 40
ETSI

---------------------- Page: 4 ----------------------
5 ETSI TS 102 486-2-1 V1.2.1 (2008-10)
E.1 Guidance for completing the profile ICS proforma . 40
E.1.1 Purposes and structure . 40
E.1.2 Abbreviations and conventions . 40
E.1.3 Instructions for completing the profile ICS proforma . 42
E.2 Identification of the implementation . 42
E.2.1 Date of the statement . 42
E.2.2 Implementation Under Test (IUT) identification . 42
E.2.3 System Under Test (SUT) identification . 43
E.2.4 Product supplier . 43
E.2.5 Client (if different from product supplier) . 43
E.2.6 Profile ICS contact person . 44
E.3 Identification of the profile . 44
E.4 Global statement of conformance . 45
E.5 Profiles . 45
E.6 Interlayer Relations . 45
E.6.1 Receiver . 45
E.6.2 Transmitter . 46
Annex F (normative): Profile specific ICS proforma for RTTT profile of DSRC application
layer for RSU . 47
F.1 Guidance for completing the profile ICS proforma . 47
F.1.1 Purposes and structure . 47
F.1.2 Abbreviations and conventions . 47
F.1.3 Instructions for completing the profile ICS proforma . 49
F.2 Identification of the implementation . 49
F.2.1 Date of the statement . 49
F.2.2 Implementation Under Test (IUT) identification . 49
F.2.3 System Under Test (SUT) identification . 50
F.2.4 Product supplier . 50
F.2.5 Client (if different from product supplier) . 50
F.2.6 Profile ICS contact person . 51
F.3 Identification of the profile . 51
F.4 Global statement of conformance . 52
F.5 Profiles . 52
F.6 Interlayer Relations . 52
F.6.1 Transmitter . 52
F.6.2 Receiver . 53
History . 54

ETSI

---------------------- Page: 5 ----------------------
6 ETSI TS 102 486-2-1 V1.2.1 (2008-10)
Intellectual Property Rights
IPRs essential or potentially essential to the present document may have been declared to ETSI. The information
pertaining to these essential IPRs, if any, is publicly available for ETSI members and non-members, and can be found
in ETSI SR 000 314: "Intellectual Property Rights (IPRs); Essential, or potentially Essential, IPRs notified to ETSI in
respect of ETSI standards", which is available from the ETSI Secretariat. Latest updates are available on the ETSI Web
server (http://webapp.etsi.org/IPR/home.asp).
Pursuant to the ETSI IPR Policy, no investigation, including IPR searches, has been carried out by ETSI. No guarantee
can be given as to the existence of other IPRs not referenced in ETSI SR 000 314 (or the updates on the ETSI Web
server) which are, or may be, or may become, essential to the present document.
Foreword
This Technical Specification (TS) has been produced by ETSI Technical Committee Intelligent Transport System(ITS).
The present document is part 2, sub-part 1 of a multi-part deliverable covering Intelligent Transport Systems (ITS);
Road Transport and Traffic Telematics (RTTT); Test specifications for Dedicated ShortRange Communication (DSRC)
transmission equipment as identified belowas identified below:
Part 1: "DSRC data link layer: medium access and logical link control";
Part 2: "DSRC application layer":
Sub-part 1: "Protocol Implementation Conformance Statement (PICS) proforma specification";
Sub-part 2: "Test Suite Structure and Test Purposes (TSS&TP)";
Sub-part 3:  "Abstract Test Suite (ATS) and partial PIXIT proforma".
ETSI

---------------------- Page: 6 ----------------------
7 ETSI TS 102 486-2-1 V1.2.1 (2008-10)
1 Scope
The present document specifies partial Protocol Implementation Conformance Statement (PICS) proformas for the
application layer of CEN DSRC as defined in EN 12834 [1], in compliance with the relevant requirements, and in
accordance with the relevant guidance given in ISO/IEC 9646-7 [4] and ETS 300 406 [5].
This proforma is intended for use by suppliers of equipment which is claimed to conform to the CEN DSRC application
layer, as specified in EN 12834 [1].
The present document also contains profile Implementation Conformance Statement (ICS) proformas and profile
Requirements Lists for the application layer for use by suppliers of equipment which is claimed to conform to
EN 13372 [2], DSRC Profiles for RTTT.
To evaluate conformance of a particular implementation, it is necessary to have a statement of which capabilities and
options have been implemented for a telecommunication specification. Such a statement is called an Implementation
Conformance Statement (ICS). The present document provides proforma ICS templates, to be filled in by equipment
suppliers.
2 References
References are either specific (identified by date of publication and/or edition number or version number) or
non-specific.
• For a specific reference, subsequent revisions do not apply.
• Non-specific reference may be made only to a complete document or a part thereof and only in the following
cases:
- if it is accepted that it will be possible to use all future changes of the referenced document for the
purposes of the referring document;
- for informative references.
Referenced documents which are not found to be publicly available in the expected location might be found at
http://docbox.etsi.org/Reference.
For online referenced documents, information sufficient to identify and locate the source shall be provided. Preferably,
the primary source of the referenced document should be cited, in order to ensure traceability. Furthermore, the
reference should, as far as possible, remain valid for the expected life of the document. The reference shall include the
method of access to the referenced document and the full network address, with the same punctuation and use of upper
case and lower case letters.
NOTE: While any hyperlinks included in this clause were valid at the time of publication ETSI cannot guarantee
their long term validity.
2.1 Normative references
The following referenced documents are indispensable for the application of the present document. For dated
references, only the edition cited applies. For non-specific references, the latest edition of the referenced document
(including any amendments) applies.
[1] CEN EN 12834 (2003): "Road transport and traffic telematics - Dedicated Short Range
Communication (DSRC). DSRC application layer".
[2] CEN EN 13372 (2004): "Road Transport and Traffic Telematics (RTTT) - Dedicated short-range
communication - Profiles for RTTT applications".
[3] ISO/IEC 9646-1: "Information technology - Open Systems Interconnection - Conformance testing
methodology and framework - Part 1: General concept".
ETSI

---------------------- Page: 7 ----------------------
8 ETSI TS 102 486-2-1 V1.2.1 (2008-10)
[4] ISO/IEC 9646-7: "Information technology - Open Systems Interconnection - Conformance testing
methodology and framework - Part 7: Implementation Conformance Statements".
[5] ETSI ETS 300 406: "Methods for testing and Specification (MTS); Protocol and profile
conformance testing specifications; Standardization methodology".
2.2 Informative references
The following referenced documents are not essential to the use of the present document but they assist the user with
regard to a particular subject area. For non-specific references, the latest version of the referenced document (including
any amendments) applies.
Not applicable.
3 Definitions and abbreviations
3.1 Definitions
For the purposes of the present document, the terms and definitions given in EN 12834 [1], EN 13372 [2],
ISO/IEC 9646-1 [3], ISO/IEC 9646-7 [4] and the following apply:
Implementation Conformance Statement (ICS): statement made by the supplier of an implementation or system
claimed to conform to a given specification, stating which capabilities have been implemented
NOTE: The ICS can take several forms: protocol ICS, profile ICS, profile specific ICS, information object ICS,
etc.
ICS proforma: document, in the form of a questionnaire, which when completed for an implementation or system
becomes an ICS
3.2 Abbreviations
For the purposes of the present document, the abbreviations given in EN 12834 [1], EN 13372 [2], ISO/IEC 9646-1 [3],
ISO/IEC 9646-7 [4] and the following apply:
DSRC Dedicated Short Range Communication
ICS Implementation Conformance Statement
IUT Implementation Under Test
ME Mobile Equipment
OBU On Board Unit
NOTE: An alternative descriptor to Mobile Equipment.
PICS Protocol Implementation Conformance Statement
RL Requirements List
RSU Road Side Unit
NOTE: An alternative descriptor to Fixed Equipment.
RTTT Road Transport and Traffic Telematics
SUT System Under Test
ETSI

---------------------- Page: 8 ----------------------
9 ETSI TS 102 486-2-1 V1.2.1 (2008-10)
4 Overview of the templates
The present document contains separate PICS templates for On Board Unit (OBU) and Road Side Unit (RSU). These
can be found in annexes A and B respectively.
In addition, the present document contains profile Requirement Lists (RL) a
...