ETSI GS ORI 002-2 V1.3.1 (2014-03)

Open Radio equipment Interface (ORI); ORI Interface Specification; Part 2: Control and Management (Release 1)

RGS/ORI-0014

General Information

• Status: Published
• Publication Date: 13-Mar-2014
• Technical Committee: ORI - Open Radio equipment Interface
• Current Stage: 12 - Completion
• Due Date: 14-Mar-2014
• Completion Date: 14-Mar-2014

Standards Content (Sample)

Group Specification
Open Radio equipment Interface (ORI);
ORI Interface Specification;
Part 2: Control and Management
(Release 1)
Disclaimer
This document has been produced and approved by the Open Radio equipment Interface (ORI) ETSI Industry Specification
Group (ISG) and represents the views of those members who participated in this ISG.
It does not necessarily represent the views of the entire ETSI membership.

2 ETSI GS ORI 002-2 V1.3.1 (2014-03)

Reference
RGS/ORI-0014
Keywords
control, interface, management, radio
ETSI
650 Route des Lucioles
F-06921 Sophia Antipolis Cedex - FRANCE

Tel.: [phone]  Fax: [phone]

Siret N° 348 623 562 00017 - NAF 742 C
Association à but non lucratif enregistrée à la
Sous-Préfecture de Grasse (06) N° 7803/88

Important notice
The present document can be downloaded from:
http://www.etsi.org
The present document may be made available in electronic versions and/or in print. The content of any electronic and/or
print versions of the present document shall not be modified without the prior written authorization of ETSI. In case of any
existing or perceived difference in contents between such versions and/or in print, the only prevailing document is the
print of the Portable Document Format (PDF) version kept on a specific network drive within ETSI Secretariat.
Users of the present document should be aware that the document may be subject to revision or change of status.
Information on the current status of this and other ETSI documents is available at
http://portal.etsi.org/tb/status/status.asp
If you find errors in the present document, please send your comment to one of the following services:
http://portal.etsi.org/chaircor/ETSI_support.asp
Copyright Notification
No part may be reproduced or utilized in any form or by any means, electronic or mechanical, including photocopying
and microfilm except as authorized by written permission of ETSI.
The content of the PDF version shall not be modified without the written authorization of ETSI.
The copyright and the foregoing restriction extend to reproduction in all media.

© European Telecommunications Standards Institute 2014.
All rights reserved.
TM TM TM
DECT , PLUGTESTS , UMTS and the ETSI logo are Trade Marks of ETSI registered for the benefit of its Members.
TM
3GPP and LTE™ are Trade Marks of ETSI registered for the benefit of its Members and
of the 3GPP Organizational Partners.
GSM® and the GSM logo are Trade Marks registered and owned by the GSM Association.
ETSI
3 ETSI GS ORI 002-2 V1.3.1 (2014-03)
Contents
Intellectual Property Rights . 7
Foreword . 7
1 Scope . 8
2 References . 8
2.1 Normative references . 8
2.2 Informative references . 9
3 Definitions, symbols and abbreviations . 9
3.1 Definitions . 9
3.2 Symbols . 10
3.3 Abbreviations . 11
4 Introduction . 12
5 C&M plane description . 12
5.1 Protocol stack . 12
5.2 C&M plane protocols . 12
5.2.1 Ethernet/Fast C&M . 13
5.2.2 IP . 13
5.2.3 DHCP . 13
5.2.4 TCP/UDP . 13
5.2.5 FTP . 13
5.2.6 ORI C&M Protocol (OCP) . 13
5.2.7 AISG/3GPP Iuant interface support within ORI . 14
5.3 OCP message encoding and object modelling. 14
5.4 Vendor specific extensions . 15
6 RE Resource Model and its related Management Functions . 15
6.1 Introduction . 15
6.2 Object types . 17
6.3 Object lifecycle . 17
6.4 Object naming/addressing . 17
6.5 Object relations . 19
6.6 Object parameters . 20
6.6.1 Roles/Purposes of parameters . 20
6.6.2 Parameter characterization . 20
6.6.2.1 Object containment . 20
6.6.2.2 Parameter Name . 20
6.6.2.3 Parameter Type . 21
6.6.2.4 Parameter Access . 21
6.6.2.5 Default value . 21
6.6.3 Void . 22
6.6.4 Parameter access functions . 22
6.7 Object states/State handling . 22
6.7.1 State types/states . 22
6.7.1.1 Administrative State (AST) . 22
6.7.1.2 Functional state (FST) . 24
6.7.1.3 Relationship between Administrative and Functional states . 24
6.7.2 State management functions . 25
6.7.3 Linkage between object state changes and fault reporting . 25
6.8 Fault management . 25
6.8.1 Fault States. 26
6.8.2 Fault Severity . 26
6.8.3 Fault Reporting . 26
6.8.4 Fault History . 27
6.8.5 ORI Fault Types . 27
6.8.6 Handling of Fault Reports by the REC . 27
ETSI
4 ETSI GS ORI 002-2 V1.3.1 (2014-03)
6.9 Performance Management . 27
6.10 Logging . 27
6.10.1 Log concept . 27
6.10.2 Log types & content . 28
6.10.3 Log categories . 29
6.10.4 Log configuration and control . 29
6.10.5 Log file naming . 30
6.11 Vendor specific extensions to the resource model . 30
6.11.1 Vendor specific parameters. 31
6.11.2 Vendor specific object types . 31
6.11.3 Vendor specific fault types . 31
7 OCP format and encoding structure . 32
7.1 Roles of REC/RE . 32
7.2 Message format and encoding . 32
7.2.1 Message types/handling . 32
7.2.2 Encoding basis . 33
7.2.3 Data types . 33
7.2.4 Name spaces . 36
7.2.5 Message structure . 37
7.2.5.1 Message Header . 37
7.2.5.2 Message body . 38
7.2.5.3 OCP message . 38
7.3 Transport protocol embedding . 38
7.3.1 Message framing . 38
7.4 Common default result codes . 39
7.5 Default failure response message . 40
7.5.1 Message parameter details . 41
7.5.2 Message encoding . 42
8 OCP Elementary Functions and Messages . 43
8.1 Device management . 43
8.1.1 Health Check . 43
8.1.1.1 Success . 43
8.1.1.2 Failure . 43
8.1.1.3 Message Parameter Details . 43
8.1.2 Set Time . 45
8.1.2.1 Success . 45
8.1.2.2 Failure . 45
8.1.2.3 Message parameter details . 45
8.1.2.4 Message encoding . 46
8.1.3 RE Reset . 46
8.1.3.1 Success . 47
8.1.3.2 Failure . 47
8.2 Software management . 48
8.2.1 Version Query . 48
8.2.1.1 Success . 48
8.2.1.2 Failure . 49
8.2.1.3 Message parameter details . 49
8.2.1.4 Message encoding . 49
8.2.2 Software Update Preparation . 50
8.2.2.1 Success . 51
8.2.2.2 Failure . 51
8.2.2.3 Message parameter details . 51
8.2.2.4 Message encoding . 52
8.2.3 Software Download . 52
8.2.3.1 Success . 53
8.2.3.2 Failure . 53
8.2.3.3 Message parameter details . 53
8.2.3.4 Message encoding . 54
8.2.4 Software Activation . 54
8.2.4.1 Success . 55
ETSI
5 ETSI GS ORI 002-2 V1.3.1 (2014-03)
8.2.4.2 Failure . 55
8.2.4.3 Message parameter details . 55
8.2.4.4 Message encoding . 55
8.3 Configuration management . 56
8.3.1 Object Parameter Reporting . 56
8.3.1.1 Success . 57
8.3.1.2 Failure . 57
8.3.1.3 Message Parameter Details . 58
8.3.1.4 Message encoding . 58
8.3.2 Object Parameter Modification . 60
8.3.2.1 Success . 61
8.3.2.2 Failure . 61
8.3.2.3 Message parameter details . 62
8.3.2.4 Message encoding . 63
8.4 Object lifecycle . 65
8.4.1 Object Creation . 65
8.4.1.1 Success . 66
8.4.1.2 Failure . 66
8.4.1.3 Message parameter details . 67
8.4.1.4 Message encoding . 68
8.4.2 Object Deletion . 71
8.4.2.1 Success . 71
8.4.2.2 Failure . 71
8.4.2.3 Message parameter details . 72
8.4.2.4 Message encoding . 72
8.5 Object State management . 73
8.5.1 Object State Reporting . 73
8.5.1.1 Success . 73
8.5.1.2 Failure . 74
8.5.1.3 Event-triggered reporting of state change . 74
8.5.1.4 Message parameters . 75
8.5.1.5 Message encoding . 76
8.5.2 Object State Modification . 78
8.5.2.1 Success . 78
8.5.2.2 Failure . 79
8.5.2.3 Abnormal operation . 79
8.5.2.4 Message parameter details . 79
8.5.2.5 Message encoding . 80
8.6 Fault management . 82
8.6.1 Fault Reporting . 82
8.6.1.1 Success . 82
8.6.1.2 Failure . 83
8.6.1.3 Event-triggered reporting . 83
8.6.1.4 Message parameter details . 83
8.6.1.5 Message encoding . 84
8.7 Performance management . 86
8.8 Logging . 87
8.8.1 File Available Indication . 87
8.8.1.1 Message Parameter details . 87
8.8.1.2 Message encoding . 87
8.8.2 File Upload . 88
8.8.2.1 Success . 89
8.8.2.2 Failure . 89
8.8.2.3 File Upload Completion reporting . 90
8.8.2.4 Message parameter details . 90
8.8.2.5 Message encoding . 91
8.8.3 Activate Configuration . 93
8.8.3.1 Success . 94
8.8.3.2 Failure . 94
8.8.3.3 Activate Configuration completion reporting . 94
8.8.3.4 Message Parameter details . 95
8.8.3.5 Message encoding . 95
ETSI
6 ETSI GS ORI 002-2 V1.3.1 (2014-03)
8.9 AISG specific procedures . 98
8.9.1 Device scan . 98
8.9.1.1 Success . 98
8.9.1.2 Failure . 99
8.9.1.3 Device Scan completion . 99
8.9.1.4 Message parameter details . 99
8.9.1.5 Message encoding . 100
8.9.2 AISG Layer 7 message and Alarm transfer . 101
8.9.2.1 AISG message transmission (between REC and RE) . 102
8.9.2.1.1 Success . 102
8.9.2.1.2 Failure . 102
8.9.2.2 AISG ALD receive indication . 103
8.9.2.3 Message parameter details . 103
8.9.2.4 Message encoding . 103
9 Specified object types/parameters and fault types . 105
9.1 Specified object types and their associated parameters . 105
9.1.1 RE Object. 105
9.1.2 Physical Antenna Port Object . 107
9.1.3 TxSigPath Object . 107
9.1.4 RxSigPath Object . 114
9.1.5 ORI Link Object . 121
9.1.6 External Event Port Object . 124
9.1.7 AISGPort Object . 125
9.1.8 AISGALD Object . 126
9.1.9 Log Object . 129
9.2 Specified fault types . 131
10 RE management procedures . 133
10.1 RE Device management . 133
10.1.1 OCP layer establishment and supervision between REC and RE . 133
10.1.1.1 DHCP options . 137
10.1.1.2 TCP options. 138
10.1.2 REC - RE alignment procedure . 139
10.1.3 Software management . 140
10.1.3.1 Software operation following RE reset . 140
10.1.3.1.1 Normal operation . 140
10.1.3.1.2 Abnormal operation . 140
10.1.3.2 Void. 140
10.1.3.3 REC<->RE Software Alignment . 140
10.2 RE operation . 141
10.2.1 Dynamic object initial status alignment . 141
10.2.2 ORI link configuration . 142
10.2.2.1 General . 142
10.2.2.2 Transceiver module inserted during RE operation . 142
10.2.3 ORI link maintenance . 143
10.2.4 Delay calibration . 144
10.2.5 Signal Path control (Cell configuration) . 146
10.2.5.1 Signal Path setup . 146
10.2.5.2 Modify a Signal Path parameter when locking required . 148
10.2.5.3 Modify a Signal Path parameter when locking not required . 151
10.2.5.4 Delete a Signal Path . 152
10.2.5.5 Switch a Signal Path off and on . 152
10.2.6 AISG/3GPP Iuant management . 153
10.2.6.1 AISG/3GPP Iuant Layer 2 establishment . 153
10.2.6.1.1 Layer 2 connection establishment using Device Scan . 154
10.2.6.1.2 Layer 2 connection establishment using AISGALD object creation requested by the REC . 155
Annex A (informative): Example for a vendor specific parameter in the RE resource model. 157
Annex B (normative): ORI vendor codes. 158
History . 159
ETSI
7 ETSI GS ORI 002-2 V1.3.1 (2014-03)
Intellectual Property Rights
IPRs essential or potentially essential to the present document may have been declared to ETSI. The information
pertaining to these essential IPRs, if any, is publicly available for ETSI members and non-members, and can be found
in ETSI SR 000 314: "Intellectual Property Rights (IPRs); Essential, or potentially Essential, IPRs notified to ETSI in
respect of ETSI standards", which is available from the ETSI Secretariat. Latest updates are available on the ETSI Web
server (http://ipr.etsi.org).
Pursuant to the ETSI IPR Policy, no investigation, including IPR searches, has been carried out by ETSI. No guarantee
can be given as to the existence of other IPRs not referenced in ETSI SR 000 314 (or the updates on the ETSI Web
server) which are, or may be, or may become, essential to the present document.
Foreword
This Group Specification (GS) has been produced by ETSI Industry Specification Group (ISG) Open Radio equipment
Interface (ORI).
The present document is part 2 of a multi-part deliverable covering the ORI Interface Specification, as identified below:
Part 1: "Low Layers (Release 1)";
Part 2: "Control and Management (Release 1)".
ETSI
8 ETSI GS ORI 002-2 V1.3.1 (2014-03)
1 Scope
The present document aims to define Control and Management plane functions and protocols, addressing, message
format and coding of the Open Radio equipment Interface (ORI) for Release 1.
2 References
References are either specific (identified by date of publication and/or edition number or version number) or
non-specific. For specific references, only the cited version applies. For non-specific references, the latest version of the
reference document (including any amendments) applies.
Referenced documents which are not found to be publicly available in the expected location might be found at
http://docbox.etsi.org/Reference.
NOTE: While any hyperlinks included in this clause were valid at the time of publication, ETSI cannot guarantee
their long term validity.
2.1 Normative references
The following referenced documents are necessary for the application of the present document.
[1] "Common Public Radio Interface (CPRI); Interface Specification" V 4.1.
NOTE: Available at http://www.cpri.info/spec.html.
[2] ETSI GS ORI 001: "Open Radio equipment Interface (ORI); Requirements for Open Radio
equipment Interface (ORI) (Release 1)".
[3] ETSI GS ORI 002-1: "Open Radio equipment Interface (ORI); ORI Interface Specification;
Part 1: Low Layers (Release 1)".
[4] IEEE Std 802-2001: "IEEE Standard for Local and Metropolitan Area Networks: Overview and
Architecture".
[5] W3C Recommendation 28 October 2004: "XML Schema" (part 0 to 2).
NOTE: Part 0: Primer Second Edition http://www.w3.org/TR/2004/REC-xmlschema-0-20041028/
Part 1: Structures Second Edition http://www.w3.org/TR/2004/REC-xmlschema-1-20041028/
Part 2: Datatypes Second Edition http://www.w3.org/TR/2004/REC-xmlschema-2-20041028/
[6] The Unicode Consortium: "The Unicode Standard V6.0.0"; edited by Julie D. Allen [et al.].
Version 6.0, February 2011, ISBN 978-1-936213-01-6.
NOTE: http://www.unicode.org/versions/Unicode6.0.0/.
[7] W3C Recommendation 26 November 2008: "Extensible Markup Language (XML) 1.0" Fifth
Edition.
NOTE: http://www.w3.org/TR/2008/REC-xml-20081126/.
[8] IETF RFC 2045 (1996): "Multipurpose Internet Mail Extensions (MIME) Part One: Format of
Internet Message Bodies".
NOTE: http://www.ietf.org/rfc/rfc2045.txt.
[9] ETSI TS 125 461 (V10.2.0): "Universal Mobile Telecommunications System (UMTS); UTRAN
Iuant interface: Layer 1 (3GPP TS 25.461 version 10.2.0 Release 10)".
[10] ETSI TS 125 462 (V10.1.0): "Universal Mobile Telecommunications System (UMTS); UTRAN
Iuant interface: Signalling transport (3GPP TS 25.462 version 10.1.0 Release 10)".
ETSI
9 ETSI GS ORI 002-2 V1.3.1 (2014-03)
[11] ETSI TS 125 466 (V10.3.0): "Universal Mobile Telecommunications System (UMTS); UTRAN
Iuant interface: Application part (3GPP TS 25.466 version 10.3.0 Release 10)".
[12] Antenna Interface Standards Group, Standard No. AISG v2.0, 13th June 2006: "Control interface
for antenna line devices".
NOTE: Available at www.aisg.org.uk.
[13] ETSI TS 125 215: "Universal Mobile Telecommunications System (UMTS); Physical layer;
Measurements (FDD) (3GPP TS 25.215)".
[14] IETF RFC 959: "File Transfer Protocol".
[15] ISO/IEC 13239 (2002): "Information technology -- Telecommunica
...