ETSI TS 103 267 V2.1.1 (2020-02)

SmartM2M; Smart Applications; Communication Framework

RTS/SmartM2M-103267v2

General Information

• Status: Published
• Publication Date: 12-Feb-2020
• Technical Committee: SmartM2M - Smart M2M
• Current Stage: 12 - Completion
• Due Date: 11-Feb-2020
• Completion Date: 13-Feb-2020

Standards Content (Sample)

ETSI TS 103 267 V2.1.1 (2020-02)






TECHNICAL SPECIFICATION
SmartM2M;
Smart Applications;
Communication Framework

---------------------- Page: 1 ----------------------
2 ETSI TS 103 267 V2.1.1 (2020-02)



Reference
RTS/SmartM2M-103267v2
Keywords
data, data sharing, IoT, M2M, model, ontology,
SAREF, semantic

ETSI
650 Route des Lucioles
F-06921 Sophia Antipolis Cedex - FRANCE

Tel.: [phone]  Fax: [phone]

Siret N° 348 623 562 00017 - NAF 742 C
Association à but non lucratif enregistrée à la
Sous-Préfecture de Grasse (06) N° 7803/88

Important notice
The present document can be downloaded from:
http://www.etsi.org/standards-search
The present document may be made available in electronic versions and/or in print. The content of any electronic and/or
print versions of the present document shall not be modified without the prior written authorization of ETSI. In case of any
existing or perceived difference in contents between such versions and/or in print, the prevailing version of an ETSI
deliverable is the one made publicly available in PDF format at www.etsi.org/deliver.
Users of the present document should be aware that the document may be subject to revision or change of status.
Information on the current status of this and other ETSI documents is available at
https://portal.etsi.org/TB/ETSIDeliverableStatus.aspx
If you find errors in the present document, please send your comment to one of the following services:
https://portal.etsi.org/People/CommiteeSupportStaff.aspx
Copyright Notification
No part may be reproduced or utilized in any form or by any means, electronic or mechanical, including photocopying
and microfilm except as authorized by written permission of ETSI.
The content of the PDF version shall not be modified without the written authorization of ETSI.
The copyright and the foregoing restriction extend to reproduction in all media.

© ETSI 2020.
All rights reserved.

DECT™, PLUGTESTS™, UMTS™ and the ETSI logo are trademarks of ETSI registered for the benefit of its Members.

3GPP™ and LTE™ are trademarks of ETSI registered for the benefit of its Members and
of the 3GPP Organizational Partners.
oneM2M™ logo is a trademark of ETSI registered for the benefit of its Members and
of the oneM2M Partners.
®
GSM and the GSM logo are trademarks registered and owned by the GSM Association.
ETSI

---------------------- Page: 2 ----------------------
3 ETSI TS 103 267 V2.1.1 (2020-02)
Contents
Intellectual Property Rights . 4
Foreword . 4
Modal verbs terminology . 5
1 Scope . 6
2 References . 6
2.1 Normative references . 6
2.2 Informative references . 7
3 Definition of terms, symbols and abbreviations . 8
3.1 Terms . 8
3.2 Symbols . 8
3.3 Abbreviations . 8
4 Smart Applications communication functionality and protocols . 8
4.1 Introduction . 8
4.2 Smart Applications Communication Framework . 9
5 Interworking with the Smart Applications Communication Framework . 10
History . 11


ETSI

---------------------- Page: 3 ----------------------
4 ETSI TS 103 267 V2.1.1 (2020-02)
Intellectual Property Rights
Essential patents
IPRs essential or potentially essential to normative deliverables may have been declared to ETSI. The information
pertaining to these essential IPRs, if any, is publicly available for ETSI members and non-members, and can be found
in ETSI SR 000 314: "Intellectual Property Rights (IPRs); Essential, or potentially Essential, IPRs notified to ETSI in
respect of ETSI standards", which is available from the ETSI Secretariat. Latest updates are available on the ETSI Web
server (https://ipr.etsi.org/).
Pursuant to the ETSI IPR Policy, no investigation, including IPR searches, has been carried out by ETSI. No guarantee
can be given as to the existence of other IPRs not referenced in ETSI SR 000 314 (or the updates on the ETSI Web
server) which are, or may be, or may become, essential to the present document.
Trademarks
The present document may include trademarks and/or tradenames which are asserted and/or registered by their owners.
ETSI claims no ownership of these except for any which are indicated as being the property of ETSI, and conveys no
right to use or reproduce any trademark and/or tradename. Mention of those trademarks in the present document does
not constitute an endorsement by ETSI of products, services or organizations associated with those trademarks.
Foreword
This Technical Specification (TS) has been produced by ETSI Technical Committee Smart Machine-to-Machine
communications (SmartM2M).
The final scope is to provide a set of specifications that assure a smooth communication between the smart applications
in IoT systems. An important aspect is to ensure a common interworking framework to cater for the communication
among systems that apply the full set of specifications as referenced in the present document. This is in recognition of
the potential long term existence of legacy and specialized systems and the need to communication amongst & between
systems.
The full set of specifications cover three aspects:
1) The semantic aspect specified by the Smart Applications REFerence ontology (SAREF) and its mapping on
the SAREF Communication Framework provided by oneM2M standard:
- ETSI TS 103 264 [1], which includes the SAREF and its extensions.
NOTE: This work is based on the Study on Semantic Assets for Smart Appliances Interoperability of the
European Commission DG Communications Networks, Content & Technology [i.1].
2) The SAREF communication framework, the present document.
3) The full testing support for the above mentioned documents:
- ETSI TS 103 268-1 [i.6].
- ETSI TS 103 268-2 [i.7].
- ETSI TS 103 268-3 [i.8].
- ETSI TS 103 268-4 [i.9].
ETSI

---------------------- Page: 4 ----------------------
5 ETSI TS 103 267 V2.1.1 (2020-02)
Modal verbs terminology
In the present document "shall", "shall not", "should", "should not", "may", "need not", "will", "will not", "can" and
"cannot" are to be interpreted as described in clause 3.2 of the ETSI Drafting Rules (Verbal forms for the expression of
provisions).
"must" and "must not" are NOT allowed in ETSI deliverables except when used in direct citation.

ETSI

---------------------- Page: 5 ----------------------
6 ETSI TS 103 267 V2.1.1 (2020-02)
1 Scope
The present document defines a framework for Smart Applications communication based on oneM2M specifications. It
also provides adjustments as required by the interested stakeholders.
The present document includes:
• An introduction to the oneM2M framework and its relation with the ETSI M2M one.
• The specification of the interworking framework for Smart Applications with normative reference to oneM2M
specifications.
• The specification about how to interwork with the oneM2M framework.
2 References
2.1 Normative references
References are either specific (identified by date of publication and/or edition number or version number) or
non-specific. For specific references, only the cited version applies. For non-specific references, the latest version of the
referenced document (including any amendments) applies.
Referenced documents which are not found to be publicly available in the expected location might be found at
https://docbox.etsi.org/Reference.
NOTE: While any hyperlinks included in this clause were valid at the time of publication, ETSI cannot guarantee
their long term validity.
The following referenced documents are necessary for the application of the present document.
[1] ETSI TS 103 264 (V3.1.1): "SmartM2M; Smart Applications; Reference Ontology and oneM2M
Mapping".
[2] ETSI TS 118 111: "oneM2M; Common Terminology (oneM2M TS-0011)".
[3] ETSI TS 118 102: "oneM2M Requirements (oneM2M TS-0002)".
[4] ETSI TS 118 101: "oneM2M; Functional Architecture (oneM2M TS-0001)".
[5] ETSI TS 118 104: "oneM2M; Service Layer Core Protocol Specification (oneM2M TS-0004)".
[6] ETSI TS 118 103: "oneM2M; Security solutions (oneM2M TS-0003)".
[7] ETSI TS 118 105: "oneM2M; Management Enablement (OMA) (oneM2M TS-0005)".
[8] ETSI TS 118 106: "oneM2M; Management Enablement (BBF) (oneM2M TS-0006)".
[9] ETSI TS 118 109: "oneM2M; HTTP Protocol Binding (oneM2M TS-0009)".
[10] ETSI TS 118 120: "oneM2M; WebSocket Protocol Binding (o
...