ETSI EN 300 019-1-2 V2.1.2 (2002-04)

Environmental Engineering (EE); Environmental conditions and environmental tests for telecommunications equipment; Part 1-2: Classification of environmental conditions; Transportation

REN/EE-01027-1-2

Okoljski inženiring (EE) – Okoljski pogoji in preskusi vplivov okolja na telekomunikacijsko opremo – 1-2. del: Klasifikacija okoljskih pogojev – Prevoz

General Information

• Status: Published
• Publication Date: 25-Apr-2002
• Technical Committee: EE 1 - EE Environmental Conditions
• Current Stage: 12 - Completion
• Due Date: 29-Apr-2002
• Completion Date: 26-Apr-2002
• Ref Project: SIST EN 300 019-1-2 V2.1.2:2006 - Environmental Engineering (EE); Environmental conditions and environmental tests for telecommunications equipment; Part 1-2: Classification of environmental conditions; Transportation

Standards Content (Sample)

SLOVENSKI STANDARD
SIST EN 300 019-1-2 V2.1.2:2006
01-februar-2006
Okoljski inženiring (EE) – Okoljski pogoji in preskusi vplivov okolja na
telekomunikacijsko opremo – 1-2. del: Klasifikacija okoljskih pogojev – Prevoz
Environmental Engineering (EE); Environmental conditions and environmental tests for
telecommunications equipment; Part 1-2: Classification of environmental conditions;
Transportation
Ta slovenski standard je istoveten z: EN 300 019-1-2 Version 2.1.2
ICS:
19.040 Preskušanje v zvezi z Environmental testing
okoljem
33.050.01 Telekomunikacijska Telecommunication terminal
terminalska oprema na equipment in general
splošno
SIST EN 300 019-1-2 V2.1.2:2006 en
2003-01.Slovenski inštitut za standardizacijo. Razmnoževanje celote ali delov tega standarda ni dovoljeno.

---------------------- Page: 1 ----------------------

SIST EN 300 019-1-2 V2.1.2:2006

---------------------- Page: 2 ----------------------

SIST EN 300 019-1-2 V2.1.2:2006
ETSI EN 300 019-1-2 V2.1.2 (2002-04)
European Standard (Telecommunications series)
Environmental Engineering (EE);
Environmental conditions and environmental tests
for telecommunications equipment;
Part 1-2: Classification of environmental conditions;
Transportation

---------------------- Page: 3 ----------------------

SIST EN 300 019-1-2 V2.1.2:2006
2 ETSI EN 300 019-1-2 V2.1.2 (2002-04)
Reference
REN/EE-01027-1-2
Keywords
environment, testing, equipment practice
ETSI
650 Route des Lucioles
F-06921 Sophia Antipolis Cedex - FRANCE
Tel.:[phone] Fax:[phone]
Siret N° 348 623 562 00017 - NAF 742 C
Association à but non lucratif enregistrée à la
Sous-Préfecture de Grasse (06) N° 7803/88
Important notice
Individual copies of the present document can be downloaded from:
http://www.etsi.org
The present document may be made available in more than one electronic version or in print. In any case of existing or
perceived difference in contents between such versions, the reference version is the Portable Document Format (PDF).
In case of dispute, the reference shall be the printing on ETSI printers of the PDF version kept on a specific network drive
within ETSI Secretariat.
Users of the present document should be aware that the document may be subject to revision or change of status.
Information on the current status of this and other ETSI documents is available at
http://portal.etsi.org/tb/status/status.asp
If you find errors in the present document, send your comment to:
[e-mail]
Copyright Notification
No part may be reproduced except as authorized by written permission.
The copyright and the foregoing restriction extend to reproduction in all media.
© European Telecommunications Standards Institute 2002.
All rights reserved.
TM TM TM
DECT , PLUGTESTS and UMTS are Trade Marks of ETSI registered for the benefit of its Members.
TM
TIPHON and the TIPHON logo are Trade Marks currently being registered by ETSI for the benefit of its Members.
TM
3GPP is a Trade Mark of ETSI registered for the benefit of its Members and of the 3GPP Organizational Partners.
ETSI

---------------------- Page: 4 ----------------------

SIST EN 300 019-1-2 V2.1.2:2006
3 ETSI EN 300 019-1-2 V2.1.2 (2002-04)
Contents
Intellectual Property Rights.4
Foreword.4
1 Scope .5
2 References .5
3 Definitions.5
4 Environmental classes .6
4.1 Class 2.1: Very careful transportation .6
4.2 Class 2.2: Careful transportation .6
4.3 Class 2.3: Public transportation.7
5 Environmental conditions.7
5.1 Climatic conditions.7
5.2 Biological conditions.8
5.3 Chemically active substances .8
5.4 Mechanically active substances.8
5.5 Mechanical conditions.9
Annex A (normative): Summary of applications of classes 2.1, 2.2 and 2.3 applied to the
climatic conditions for different areas as defined in IEC 60721-2-1 .10
Annex B (informative): Bibliography.11
History .12
ETSI

---------------------- Page: 5 ----------------------

SIST EN 300 019-1-2 V2.1.2:2006
4 ETSI EN 300 019-1-2 V2.1.2 (2002-04)
Intellectual Property Rights
IPRs essential or potentially essential to the present document may have been declared to ETSI. The information
pertaining to these essential IPRs, if any, is publicly available for ETSI members and non-members, and can be found
in ETSI SR 000 314: "Intellectual Property Rights (IPRs); Essential, or potentially Essential, IPRs notified to ETSI in
respect of ETSI standards", which is available from the ETSI Secretariat. Latest updates are available on the ETSI Web
server (http://webapp.etsi.org/IPR/home.asp).
Pursuant to the ETSI IPR Policy, no investigation, including IPR searches, has been carried out by ETSI. No guarantee
can be given as to the existence of other IPRs not referenced in ETSI SR 000 314 (or the updates on the ETSI Web
server) which are, or may be, or may become, essential to the present document.
Foreword
This European Standard (Telecommunications series) has been produced by ETSI Technical Committee Environmental
Engineering (EE).
The present document is part 1, sub-part 2 of a multi-part deliverable covering the classification of environmental
conditions and environmental tests for telecommunications equipment, as identified below:
Part 1: "Classification of environmental conditions";
Sub-part 0: "Introduction";
Sub-part 1: "Storage";
Sub-part 2: "Transportation";
Sub-part 3: "Stationary use at weatherprotected locations";
Sub-part 4: "Stationary use at non-weatherprotected locations";
Sub-part 5: "Ground vehicle installations";
Sub-part 6: "Ship environments";
Sub-part 7: "Portable and non-stationary use";
Sub-part 8: "Stationary use at underground locations";
Part 2: "Specification of environmental tests".
Part 1 specifies different standardized environmental classes covering climatic and biological conditions, chemically
and mechanically active substances and mechanical conditions during storage, transportation and in use.
Part 1-0 forms a general overview of part 1.
Part 2 specifies the recommended test severities and test methods for the different environmental classes.
National transposition dates
Date of adoption of this EN: 19 April 2002
Date of latest announcement of this EN (doa): 31 July 2002
Date of latest publication of new National Standard
or endorsement of this EN (dop/e): 31 January 2003
Date of withdrawal of any conflicting National Standard (dow): 31 January 2003
ETSI

---------------------- Page: 6 ----------------------

SIST EN 300 019-1-2 V2.1.2:2006
5 ETSI EN 300 019-1-2 V2.1.2 (2002-04)
1 Scope
The present document defines classes of environmental conditions and their severities to which telecommunication
equipment may be exposed. The severities specified are those which will have a low probability of being exceeded;
generally less than 1 %.
The present document applies to equipment being transported from one place to another after being made ready for
dispatch from the manufacturer's works. The most commonly used methods of transportation have been taken into
account, i.e. ground, water and air transport. Loading and unloading as well as temporary storage, have been included.
Where the equipment is packaged the environmental conditions apply to the packaged equipment.
NOTE: Normal transportation time is considered to be 30 days or less. Where the total transportation time
exceeds 30 days then additional storage or packaging precautions must be considered.
2 References
The following documents contain provisions which, through reference in this text, constitute provisions of the present
document.
• References are either specific (identified by date of publication and/or edition number or version number) or
non-specific.
• For a specific reference, subsequent revisions do not apply.
• For a non-specific reference, the latest version applies.
[1] IEC 60721-3-2: "Classification of environmental conditions - Part 3: Classification of groups of
environmental parameters and their severities - Section 2: Transportation".
[2] IEC 60721-2-1: "Classification of environmental conditions. Part 2: Environmental conditions
appearing in nature. Temperature and humidity".
[3] IEC 60068-2-27: "Environmental testing. Part 2: Tests. Test Ea and guidance: Shock".
[4] ETSI EN 300 019-2-2: "Equipment Engineering (EE); Environmental conditions and
environmental tests for telecommunications equipment; Part 2-2: Specification of environmental
tests; Transportation".
3 Definitions
For the purposes of the present document, the following terms and definitions apply:
absolute humidity: mass of water vapour in grammes which is associated with one cubic metre of dry air in an
air/watervapourmixture
relative humidity: ratio of the partial pressure of the water vapour in moist air at a given temperature, to the partial
pressure of the water vapour in saturated air at the same temperature
weatherprotected location: location at which the equipment is protected from direct weather influences
NOTE 1: Totally weatherprotected location: the equipment, packaged or unpackaged, is contained within an
enclosure which affords some protection from the environment, ranging from a temperature controlled
container to a waterproof cover placed over the equipment. Ventilation ranges from controlled air flow to
the raising of part of a waterproof cover to allow for natural air flow.
NOTE 2: Non-weatherprotected location: the equipment, packaged or unpackaged, is not protected in any way from
the environment.
ETSI

---------------------- Page: 7 ----------------------

SIST EN 300 019-1-2 V2.1.2:2006
6 ETSI EN 300 019-1-2 V2.1.2 (2002-04)
4 Environmental classes
The classes shown in parentheses, e.g. (2M3), may be selected for special applications.
Three different environmental classes have been defined. Classes 2.1 and 2.2 are special classes relating to low
temperature and less severe mechanical conditions. Class 2.3 is the normal class for transportation of equipment.
4.1 Class 2.1: Very careful transportation
Class 2.1 is a combination of classes 2K3/2B2/2C2/2S2/2M1 in IEC 60721-3-2 [1].
This class applies to transportation where special care has been taken e.g. with respect to low temperature and handling.
The condi
...