ETSI EN 301 459 V2.1.1 (2016-05)
Satellite Earth Stations and Systems (SES); Harmonised Standard for Satellite Interactive Terminals (SIT) and Satellite User Terminals (SUT) transmitting towards satellites in geostationary orbit, operating in the 29,5 GHz to 30,0 GHz frequency bands covering the essential requirements of article 3.2 of the Directive 2014/53/EU
Satellite Earth Stations and Systems (SES); Harmonised Standard for Satellite Interactive Terminals (SIT) and Satellite User Terminals (SUT) transmitting towards satellites in geostationary orbit, operating in the 29,5 GHz to 30,0 GHz frequency bands covering the essential requirements of article 3.2 of the Directive 2014/53/EU
REN/SES-00388
Satelitske zemeljske postaje in sistemi (SES) - Harmonizirani standard, ki zajema bistvene zahteve člena 3.2 direktive 2014/53/EU, za satelitske interaktivne terminale (SIT) in satelitske uporabniške terminale (SUT), ki oddajajo proti satelitom v geostacionarni orbiti in delujejo v frekvenčnih pasovih od 29,5 GHz do 30,0 GHz
Ta dokument velja za interaktivne satelitske terminale (SIT) in uporabniške satelitske terminale (SUT), ki so del dvosmernega satelitskega omrežja. V tem dokumentu se izraz satelitski terminal (ST) uporablja kot splošno ime za interaktivni satelitski terminal in/ali uporabniški satelitski terminal.
V takem omrežju je naprava za krmiljenje omrežja (NCF) odgovorna za spremljanje in nadzor funkcij oddajanja satelitskih terminalov. Satelitski terminali morajo imeti naslednje lastnosti:
• V primeru interaktivnih satelitskih terminalov je sprejem v frekvenčnih območjih fiksne satelitske storitve (FSS) od 10,70 do 11,70 GHz in od 12,50 do 12,75 GHz ter v frekvenčnem območju radiodifuzijske satelitske storitve (BSS) od 11,70 do 12,50 GHz.
• V primeru uporabniških satelitskih terminalov je sprejem v frekvenčnih območjih fiksne satelitske storitve (FSS) od 19,70 do 20,20 GHz in od 17,70 do 19,70 GHz ter v frekvenčnem območju radiodifuzijske satelitske storitve (BSS) od 21,40 do 22,00 GHz.
• V vseh primerih je oddajanje satelitskih terminalov primarno v frekvenčnem pasu od 29,5 do 30,0 GHz, ki je dodeljen fiksni satelitski storitvi.
• Satelitski terminali oddajajo proti geostacionarnim satelitom, ki so odmaknjeni vsaj za 2° od kateregakoli drugega geostacionarnega satelita, ki deluje v istem frekvenčnem pasu in v istem območju.
• Za prejemanje in oddajanje se uporablja linearna ali krožna polarizacija.
• Prejeti signali so lahko analogni in/ali digitalni.
• Oddajni signali so vedno digitalni.
• Premer antene satelitskega terminala ne presega 1,8 m ali enakovredne dejanske površine.
• Satelitski terminal je izdelan za nenadzorovano delovanje.
Oprema, zajeta v tem standardu, vključuje tako zunanjo enoto, ki je običajno sestavljena iz antenskega podsistema in povezanega pretvornika na višje frekvence, ojačevalnika ter nizkošumnega pretvornika na nižje frekvence (LNB), in notranje enote, ki je običajno sestavljena iz logičnega vezja za sprejemanje in oddajanje ter modulatorja, vključno s kabli med tema dvema enotama.
Ta dokument se uporablja za satelitski terminal s pomožno opremo in različnimi vrati, ko ta deluje znotraj mejnih vrednosti obratovalnega okoljskega profila, ki ga določi kandidat, ter ko je nameščen v skladu z zahtevami kandidatove izjave ali v skladu z zahtevami dokumentacije uporabnika.
Vsi deli notranje enote, ki so povezani s sprejemanjem, obdelavo in predstavitvijo prejetih informacij, razen nadzornega kanala, ne spadajo v področje uporabe tega standarda. Skladnja sporočil nadzornega kanala ne spada v področje uporabe tega dokumenta.
Ta dokument zajema določbe člena 3.2 Direktive 2014/53/EU [4] (direktive RE), ki navaja: »/.../ Radijska oprema je izdelana tako, da optimalno uporablja in podpira učinkovito izrabo radijskega spektra, z namenom preprečevanja škodljivega motenja.«
Poleg tega dokumenta se lahko za opremo v področju uporabe tega dokumenta uporabljajo tudi drugi standardi EN, ki določajo tehnične zahteve v zvezi z bistvenimi zahtevami iz drugih delov člena 3 direktive RE [4].
OPOMBA: seznam tovrstnih evropskih standardov je na voljo na spletnem mestu http://www.newapproach.org.
General Information
Buy Standard
Standards Content (Sample)
2003-01.Slovenski inštitut za standardizacijo. Razmnoževanje celote ali delov tega standarda ni dovoljeno.WHUDNWLYQHSatellite Earth Stations and Systems (SES) - Harmonised Standard for Satellite Interactive Terminals (SIT) and Satellite User Terminals (SUT) transmitting towards satellites in geostationary orbit, operating in the 29,5 GHz to 30,0 GHz frequency bands covering the essential requirements of article 3.2 of the Directive 2014/53/EU33.060.30Radiorelejni in fiksni satelitski komunikacijski sistemiRadio relay and fixed satellite communications systemsICS:Ta slovenski standard je istoveten z:ETSI EN 301 459 V2.1.1 (2016-05)SIST EN 301 459 V2.1.1:2016en01-september-2016SIST EN 301 459 V2.1.1:2016SLOVENSKI
STANDARD
SIST EN 301 459 V2.1.1:2016
ETSI EN 301 459 V2.1.1 (2016-05) Satellite Earth Stations and Systems (SES); Harmonised Standard for Satellite Interactive Terminals (SIT) and Satellite User Terminals (SUT) transmitting towards satellites in geostationary orbit, operating in the 29,5 GHz to 30,0 GHz frequency bands covering the essential requirements of article 3.2 of the Directive 2014/53/EU
HARMONISED EUROPEAN STANDARD SIST EN 301 459 V2.1.1:2016
ETSI ETSI EN 301 459 V2.1.1 (2016-05) 2
Reference REN/SES-00388 Keywords BSS, earth station, FSS, regulation, satellite, terminal ETSI 650 Route des Lucioles F-06921 Sophia Antipolis Cedex - FRANCE
Tel.: +33 4 92 94 42 00
Fax: +33 4 93 65 47 16
Siret N° 348 623 562 00017 - NAF 742 C Association à but non lucratif enregistrée à la Sous-Préfecture de Grasse (06) N° 7803/88
Important notice The present document can be downloaded from: http://www.etsi.org/standards-search The present document may be made available in electronic versions and/or in print. The content of any electronic and/or print versions of the present document shall not be modified without the prior written authorization of ETSI. In case of any existing or perceived difference in contents between such versions and/or in print, the only prevailing document is the print of the Portable Document Format (PDF) version kept on a specific network drive within ETSI Secretariat. Users of the present document should be aware that the document may be subject to revision or change of status. Information on the current status of this and other ETSI documents is available at https://portal.etsi.org/TB/ETSIDeliverableStatus.aspx If you find errors in the present document, please send your comment to one of the following services: https://portal.etsi.org/People/CommiteeSupportStaff.aspx Copyright Notification No part may be reproduced or utilized in any form or by any means, electronic or mechanical, including photocopying and microfilm except as authorized by written permission of ETSI. The content of the PDF version shall not be modified without the written authorization of ETSI. The copyright and the foregoing restriction extend to reproduction in all media.
© European Telecommunications Standards Institute 2016. All rights reserved.
DECTTM, PLUGTESTSTM, UMTSTM and the ETSI logo are Trade Marks of ETSI registered for the benefit of its Members. 3GPPTM and LTE™ are Trade Marks of ETSI registered for the benefit of its Members and of the 3GPP Organizational Partners. GSM® and the GSM logo are Trade Marks registered and owned by the GSM Association. SIST EN 301 459 V2.1.1:2016
ETSI ETSI EN 301 459 V2.1.1 (2016-05) 3 Contents Intellectual Property Rights . 6 Foreword . 6 Modal verbs terminology . 6 Introduction . 6 1 Scope . 8 2 References . 8 2.1 Normative references . 8 2.2 Informative references . 9 3 Definitions, symbols and abbreviations . 9 3.1 Definitions . 9 3.2 Symbols . 11 3.3 Abbreviations . 12 4 Technical requirements specifications . 12 4.1 General . 12 4.1.1 Environmental profile . 12 4.1.2 ST states and radio states . 12 4.2 Conformance requirements . 13 4.2.1 General . 13 4.2.2 Off-axis spurious radiation . 13 4.2.2.1 Purpose . 13 4.2.2.2 Specification. 14 4.2.2.3 Conformance tests . 15 4.2.3 On-axis spurious radiation . 15 4.2.3.1 Purpose . 15 4.2.3.2 Specification. 15 4.2.3.2.1 "Carrier-on" radio state . 15 4.2.3.2.2 "Carrier-off" and "Emissions disabled" radio states . 15 4.2.3.3 Conformance tests . 15 4.2.4 Off-axis e.i.r.p. emission density within the band . 16 4.2.4.1 Purpose . 16 4.2.4.2 Specification. 16 4.2.4.3 Conformance tests . 17 4.2.5 Carrier suppression . 17 4.2.5.1 Purpose . 17 4.2.5.2 Specification. 17 4.2.5.3 Conformance tests . 17 4.2.6 Antenna pointing accuracy . 17 4.2.6.1 Purpose . 17 4.2.6.2 Specification. 18 4.2.6.3 Conformance tests . 18 4.2.7 Control and Monitoring Functions (CMF) . 18 4.2.7.1 General . 18 4.2.7.2 Processor monitoring . 19 4.2.7.2.1 Purpose . 19 4.2.7.2.2 Specification . 19 4.2.7.2.3 Conformance tests . 19 4.2.7.3 Transmit subsystem monitoring . 19 4.2.7.3.1 Purpose . 19 4.2.7.3.2 Specification . 20 4.2.7.3.3 Conformance tests . 20 4.2.7.4 Power-on/Reset . 20 4.2.7.4.1 Purpose . 20 4.2.7.4.2 Specification . 20 4.2.7.4.3 Conformance tests . 20 SIST EN 301 459 V2.1.1:2016
ETSI ETSI EN 301 459 V2.1.1 (2016-05) 4 4.2.7.5 Control Channel (CC) reception . 20 4.2.7.5.1 Purpose . 20 4.2.7.5.2 Specification . 20 4.2.7.5.3 Conformance tests . 20 4.2.7.6 Network control commands . 20 4.2.7.6.1 Purpose . 20 4.2.7.6.2 Specification . 21 4.2.7.6.3 Conformance test . 21 4.2.7.7 Initial burst transmission . 21 4.2.7.7.1 Purpose . 21 4.2.7.7.2 Specification . 21 4.2.7.7.3 Conformance tests . 21 4.2.8 Receive antenna off-axis gain pattern . 21 4.2.8.1 Justification . 21 4.2.8.2 Specification. 21 4.2.8.3 Conformance tests . 22 4.2.9 Blocking performance . 22 4.2.9.1 Justification . 22 4.2.9.2 Specification. 22 4.2.9.3 Conformance tests . 22 4.2.10 Adjacent Signal Selectivity . 22 4.2.10.1 Justification . 22 4.2.10.2 Specification. 22 4.2.10.3 Conformance tests . 23 5 Testing for compliance with technical requirements . 23 5.1 Environmental conditions for testing . 23 5.2 Radio test suites . 23 6 Test method . 23 6.1 General . 23 6.2 Off-axis spurious radiation . 24 6.2.1 Test method . 24 6.2.1.1 General . 24 6.2.1.2 Multi-carrier operation . 24 6.2.2 Measurements up to 1 000 MHz . 25 6.2.2.1 Test site . 25 6.2.2.2 Measuring receivers . 25 6.2.2.3 Procedure . 25 6.2.3 Measurements above 1 000 MHz . 25 6.2.3.0 General . 25 6.2.3.1 Identification of the significant frequencies of spurious radiation . 26 6.2.3.1.1 Test site. 26 6.2.3.1.2 Procedure . 26 6.2.3.2 Measurement of radiated power levels of identified spurious radiation . 26 6.2.3.2.1 Test site. 26 6.2.3.2.2 Procedure . 27 6.2.3.3 Measurement of conducted spurious radiation at the antenna flange . 28 6.2.3.3.1 Test site. 28 6.2.3.3.2 Procedure . 28 6.3 On-axis spurious radiation . 29 6.3.1 Test method . 29 6.3.1.0 General . 29 6.3.1.1 Test site . 29 6.3.1.2 Method of measurement . 29 6.3.1.2.1 General . 29 6.3.1.2.2 Method of measurement at the antenna flange . 29 6.3.1.2.3 Method of measurement for an EUT with antenna . 30 6.4 Off-axis e.i.r.p. emission density within the band . 31 6.4.1 Test method . 31 6.4.1.0 General . 31 6.4.1.1 Transmit output power density . 31 SIST EN 301 459 V2.1.1:2016
ETSI ETSI EN 301 459 V2.1.1 (2016-05) 5 6.4.1.1.1 General . 31 6.4.1.1.2 Test site. 31 6.4.1.1.3 Method of measurement . 32 6.4.1.2 Antenna transmit gain . 33 6.4.1.2.1 General . 33 6.4.1.2.2 Test site. 33 6.4.1.2.3 Method of measurement . 33 6.4.1.3 Antenna transmit radiation patterns . 34 6.4.1.3.1 General . 34 6.4.1.3.2 Test site. 34 6.4.1.3.3 Test arrangement . 34 6.4.1.3.4 Co-polar radiation pattern - azimuth . 34 6.4.1.3.5 Co-polar radiation pattern - elevation . 35 6.4.1.3.6 Cross-polar radiation pattern - azimuth . 35 6.4.1.3.7 Cross-polar radiation pattern - elevation . 36 6.4.2 Computation of results . 37 6.5 Carrier suppression . 37 6.6 Antenna pointing for STs . 37 6.7 ST Control and Monitoring Functions (CMF). 38 6.7.1 Test arrangement . 38 6.7.2 Processor monitoring - Test method . 39 6.7.3 Transmit subsystem monitoring - Test method . 39 6.7.4 Power-on/Reset - Test method . 39 6.7.5 Control Channel (CC) reception - Test method . 40 6.7.6 Network Control commands - Test method . 41 6.7.7 Initial burst transmission - Test method . 42 6.8 Receive antenna off-axis gain pattern . 43 6.8.1 Test method . 43 6.8.1.1 Test site . 43 6.8.1.2 Method of measurement . 43 6.8.1.3 Computation . 44 6.9 Blocking performance . 44 6.9.1 Test method . 44 6.10 Adjacent Signal Selectivity . 44 6.10.1 Test method . 44 Annex A (normative): Relationship between the present document and the essential requirements of Directive 2014/53/EU . 46 Annex B (informative): Pointing stability methodology . 48 Annex C (informative): Bibliography . 49 History . 50
SIST EN 301 459 V2.1.1:2016
ETSI ETSI EN 301 459 V2.1.1 (2016-05) 6 Intellectual Property Rights IPRs essential or potentially essential to the present document may have been declared to ETSI. The information pertaining to these essential IPRs, if any, is publicly available for ETSI members and non-members, and can be found in ETSI SR 000 314: "Intellectual Property Rights (IPRs); Essential, or potentially Essential, IPRs notified to ETSI in respect of ETSI standards", which is available from the ETSI Secretariat. Latest updates are available on the ETSI Web server (https://ipr.etsi.org/). Pursuant to the ETSI IPR Policy, no investigation, including IPR searches, has been carried out by ETSI. No guarantee can be given as to the existence of other IPRs not referenced in ETSI SR 000 314 (or the updates on the ETSI Web server) which are, or may be, or may become, essential to the present document. Foreword This Harmonised European Standard (EN) has been produced by ETSI Technical Committee Satellite Earth Stations and Systems (SES). The present document has been prepared under the Commission's standardisation request C(2015) 5376 final [i.4] to provide one voluntary means of conforming to the essential requirements of Directive 2014/53/EU on the harmonisation of the laws of the Member States relating to the making available on the market of radio equipment and repealing Directive 1999/5/EC [4]. Once the present document is cited in the Official Journal of the European Union under that Directive, compliance with the normative clauses of the present document given in table A.1 confers, within the limits of the scope of the present document, a presumption of conformity with the corresponding essential requirements of that Directive, and associated EFTA regulations.
National transposition dates Date of adoption of this EN: 16 May 2016 Date of latest announcement of this EN (doa): 31 August 2016 Date of latest publication of new National Standard or endorsement of this EN (dop/e):
28 February 2017 Date of withdrawal of any conflicting National Standard (dow): 28 February 2018
Modal verbs terminology In the present document "shall", "shall not", "should", "should not", "may", "ne
...
ETSI EN 301 459 V2.1.1 (2016-05)
HARMONISED EUROPEAN STANDARD
Satellite Earth Stations and Systems (SES);
Harmonised Standard for Satellite Interactive Terminals (SIT)
and Satellite User Terminals (SUT)
transmitting towards satellites in geostationary orbit,
operating in the 29,5 GHz to 30,0 GHz frequency bands
covering the essential requirements
of article 3.2 of the Directive 2014/53/EU
---------------------- Page: 1 ----------------------
2 ETSI EN 301 459 V2.1.1 (2016-05)
Reference
REN/SES-00388
Keywords
BSS, earth station, FSS, regulation, satellite,
terminal
ETSI
650 Route des Lucioles
F-06921 Sophia Antipolis Cedex - FRANCE
Tel.: +33 4 92 94 42 00 Fax: +33 4 93 65 47 16
Siret N° 348 623 562 00017 - NAF 742 C
Association à but non lucratif enregistrée à la
Sous-Préfecture de Grasse (06) N° 7803/88
Important notice
The present document can be downloaded from:
http://www.etsi.org/standards-search
The present document may be made available in electronic versions and/or in print. The content of any electronic and/or
print versions of the present document shall not be modified without the prior written authorization of ETSI. In case of any
existing or perceived difference in contents between such versions and/or in print, the only prevailing document is the
print of the Portable Document Format (PDF) version kept on a specific network drive within ETSI Secretariat.
Users of the present document should be aware that the document may be subject to revision or change of status.
Information on the current status of this and other ETSI documents is available at
https://portal.etsi.org/TB/ETSIDeliverableStatus.aspx
If you find errors in the present document, please send your comment to one of the following services:
https://portal.etsi.org/People/CommiteeSupportStaff.aspx
Copyright Notification
No part may be reproduced or utilized in any form or by any means, electronic or mechanical, including photocopying
and microfilm except as authorized by written permission of ETSI.
The content of the PDF version shall not be modified without the written authorization of ETSI.
The copyright and the foregoing restriction extend to reproduction in all media.
© European Telecommunications Standards Institute 2016.
All rights reserved.
TM TM TM
DECT , PLUGTESTS , UMTS and the ETSI logo are Trade Marks of ETSI registered for the benefit of its Members.
TM
3GPP and LTE™ are Trade Marks of ETSI registered for the benefit of its Members and
of the 3GPP Organizational Partners.
GSM® and the GSM logo are Trade Marks registered and owned by the GSM Association.
ETSI
---------------------- Page: 2 ----------------------
3 ETSI EN 301 459 V2.1.1 (2016-05)
Contents
Intellectual Property Rights . 6
Foreword . 6
Modal verbs terminology . 6
Introduction . 6
1 Scope . 8
2 References . 8
2.1 Normative references . 8
2.2 Informative references . 9
3 Definitions, symbols and abbreviations . 9
3.1 Definitions . 9
3.2 Symbols . 11
3.3 Abbreviations . 12
4 Technical requirements specifications . 12
4.1 General . 12
4.1.1 Environmental profile . 12
4.1.2 ST states and radio states . 12
4.2 Conformance requirements . 13
4.2.1 General . 13
4.2.2 Off-axis spurious radiation . 13
4.2.2.1 Purpose . 13
4.2.2.2 Specification. 14
4.2.2.3 Conformance tests . 15
4.2.3 On-axis spurious radiation . 15
4.2.3.1 Purpose . 15
4.2.3.2 Specification. 15
4.2.3.2.1 "Carrier-on" radio state . 15
4.2.3.2.2 "Carrier-off" and "Emissions disabled" radio states . 15
4.2.3.3 Conformance tests . 15
4.2.4 Off-axis e.i.r.p. emission density within the band . 16
4.2.4.1 Purpose . 16
4.2.4.2 Specification. 16
4.2.4.3 Conformance tests . 17
4.2.5 Carrier suppression . 17
4.2.5.1 Purpose . 17
4.2.5.2 Specification. 17
4.2.5.3 Conformance tests . 17
4.2.6 Antenna pointing accuracy . 17
4.2.6.1 Purpose . 17
4.2.6.2 Specification. 18
4.2.6.3 Conformance tests . 18
4.2.7 Control and Monitoring Functions (CMF) . 18
4.2.7.1 General . 18
4.2.7.2 Processor monitoring . 19
4.2.7.2.1 Purpose . 19
4.2.7.2.2 Specification . 19
4.2.7.2.3 Conformance tests . 19
4.2.7.3 Transmit subsystem monitoring . 19
4.2.7.3.1 Purpose . 19
4.2.7.3.2 Specification . 20
4.2.7.3.3 Conformance tests . 20
4.2.7.4 Power-on/Reset . 20
4.2.7.4.1 Purpose . 20
4.2.7.4.2 Specification . 20
4.2.7.4.3 Conformance tests . 20
ETSI
---------------------- Page: 3 ----------------------
4 ETSI EN 301 459 V2.1.1 (2016-05)
4.2.7.5 Control Channel (CC) reception . 20
4.2.7.5.1 Purpose . 20
4.2.7.5.2 Specification . 20
4.2.7.5.3 Conformance tests . 20
4.2.7.6 Network control commands . 20
4.2.7.6.1 Purpose . 20
4.2.7.6.2 Specification . 21
4.2.7.6.3 Conformance test . 21
4.2.7.7 Initial burst transmission . 21
4.2.7.7.1 Purpose . 21
4.2.7.7.2 Specification . 21
4.2.7.7.3 Conformance tests . 21
4.2.8 Receive antenna off-axis gain pattern . 21
4.2.8.1 Justification . 21
4.2.8.2 Specification. 21
4.2.8.3 Conformance tests . 22
4.2.9 Blocking performance . 22
4.2.9.1 Justification . 22
4.2.9.2 Specification. 22
4.2.9.3 Conformance tests . 22
4.2.10 Adjacent Signal Selectivity . 22
4.2.10.1 Justification . 22
4.2.10.2 Specification. 22
4.2.10.3 Conformance tests . 23
5 Testing for compliance with technical requirements . 23
5.1 Environmental conditions for testing . 23
5.2 Radio test suites . 23
6 Test method . 23
6.1 General . 23
6.2 Off-axis spurious radiation . 24
6.2.1 Test method . 24
6.2.1.1 General . 24
6.2.1.2 Multi-carrier operation . 24
6.2.2 Measurements up to 1 000 MHz . 25
6.2.2.1 Test site . 25
6.2.2.2 Measuring receivers . 25
6.2.2.3 Procedure . 25
6.2.3 Measurements above 1 000 MHz . 25
6.2.3.0 General . 25
6.2.3.1 Identification of the significant frequencies of spurious radiation . 26
6.2.3.1.1 Test site. 26
6.2.3.1.2 Procedure . 26
6.2.3.2 Measurement of radiated power levels of identified spurious radiation . 26
6.2.3.2.1 Test site. 26
6.2.3.2.2 Procedure . 27
6.2.3.3 Measurement of conducted spurious radiation at the antenna flange . 28
6.2.3.3.1 Test site. 28
6.2.3.3.2 Procedure . 28
6.3 On-axis spurious radiation . 29
6.3.1 Test method . 29
6.3.1.0 General . 29
6.3.1.1 Test site . 29
6.3.1.2 Method of measurement . 29
6.3.1.2.1 General . 29
6.3.1.2.2 Method of measurement at the antenna flange . 29
6.3.1.2.3 Method of measurement for an EUT with antenna . 30
6.4 Off-axis e.i.r.p. emission density within the band . 31
6.4.1 Test method . 31
6.4.1.0 General . 31
6.4.1.1 Transmit output power density . 31
ETSI
---------------------- Page: 4 ----------------------
5 ETSI EN 301 459 V2.1.1 (2016-05)
6.4.1.1.1 General . 31
6.4.1.1.2 Test site. 31
6.4.1.1.3 Method of measurement . 32
6.4.1.2 Antenna transmit gain . 33
6.4.1.2.1 General . 33
6.4.1.2.2 Test site. 33
6.4.1.2.3 Method of measurement . 33
6.4.1.3 Antenna transmit radiation patterns . 34
6.4.1.3.1 General . 34
6.4.1.3.2 Test site. 34
6.4.1.3.3 Test arrangement . 34
6.4.1.3.4 Co-polar radiation pattern - azimuth . 34
6.4.1.3.5 Co-polar radiation pattern - elevation . 35
6.4.1.3.6 Cross-polar radiation pattern - azimuth . 35
6.4.1.3.7 Cross-polar radiation pattern - elevation . 36
6.4.2 Computation of results . 37
6.5 Carrier suppression . 37
6.6 Antenna pointing for STs . 37
6.7 ST Control and Monitoring Functions (CMF). 38
6.7.1 Test arrangement . 38
6.7.2 Processor monitoring - Test method . 39
6.7.3 Transmit subsystem monitoring - Test method . 39
6.7.4 Power-on/Reset - Test method . 39
6.7.5 Control Channel (CC) reception - Test method . 40
6.7.6 Network Control commands - Test method . 41
6.7.7 Initial burst transmission - Test method . 42
6.8 Receive antenna off-axis gain pattern . 43
6.8.1 Test method . 43
6.8.1.1 Test site . 43
6.8.1.2 Method of measurement . 43
6.8.1.3 Computation . 44
6.9 Blocking performance . 44
6.9.1 Test method . 44
6.10 Adjacent Signal Selectivity . 44
6.10.1 Test method . 44
Annex A (normative): Relationship between the present document and the essential
requirements of Directive 2014/53/EU . 46
Annex B (informative): Pointing stability methodology . 48
Annex C (informative): Bibliography . 49
History . 50
ETSI
---------------------- Page: 5 ----------------------
6 ETSI EN 301 459 V2.1.1 (2016-05)
Intellectual Property Rights
IPRs essential or potentially essential to the present document may have been declared to ETSI. The information
pertaining to these essential IPRs, if any, is publicly available for ETSI members and non-members, and can be found
in ETSI SR 000 314: "Intellectual Property Rights (IPRs); Essential, or potentially Essential, IPRs notified to ETSI in
respect of ETSI standards", which is available from the ETSI Secretariat. Latest updates are available on the ETSI Web
server (https://ipr.etsi.org/).
Pursuant to the ETSI IPR Policy, no investigation, including IPR searches, has been carried out by ETSI. No guarantee
can be given as to the existence of other IPRs not referenced in ETSI SR 000 314 (or the updates on the ETSI Web
server) which are, or may be, or may become, essential to the present document.
Foreword
This Harmonised European Standard (EN) has been produced by ETSI Technical Committee Satellite Earth Stations
and Systems (SES).
The present document has been prepared under the Commission's standardisation request C(2015) 5376 final [i.4] to
provide one voluntary means of conforming to the essential requirements of Directive 2014/53/EU on the harmonisation
of the laws of the Member States relating to the making available on the market of radio equipment and repealing
Directive 1999/5/EC [4].
Once the present document is cited in the Official Journal of the European Union under that Directive, compliance with
the normative clauses of the present document given in table A.1 confers, within the limits of the scope of the present
document, a presumption of conformity with the corresponding essential requirements of that Directive, and associated
EFTA regulations.
National transposition dates
Date of adoption of this EN: 16 May 2016
Date of latest announcement of this EN (doa): 31 August 2016
Date of latest publication of new National Standard
or endorsement of this EN (dop/e): 28 February 2017
Date of withdrawal of any conflicting National Standard (dow): 28 February 2018
Modal verbs terminology
In the present document "shall", "shall not", "should", "should not", "may", "need not", "will", "will not", "can" and
"cannot" are to be interpreted as described in clause 3.2 of the ETSI Drafting Rules (Verbal forms for the expression of
provisions).
"must" and "must not" are NOT allowed in ETSI deliverables except when used in direct citation.
Introduction
The present document is part of a set of standards developed by ETSI and
...
Questions, Comments and Discussion
Ask us and Technical Secretary will try to provide an answer. You can facilitate discussion about the standard in here.