ETSI TS 102 624-1 V1.2.1 (2009-11)

Broadband Radio Access Networks (BRAN); HiperMAN; Conformance Testing for the Network layer of HiperMAN/WiMAX terminal devices; Part 1: Protocol Implementation Conformance Statement (PICS) proforma

RTS/BRAN-004T010-1

General Information

• Status: Published
• Publication Date: 12-Nov-2009
• Technical Committee: BRAN - Broadband Radio Access Networks
• Current Stage: 12 - Completion
• Due Date: 12-Nov-2009
• Completion Date: 13-Nov-2009

Standards Content (Sample)

ETSI TS 102 624-1 V1.2.1 (2009-11)
Technical Specification

Broadband Radio Access Networks (BRAN);
HiperMAN;
Conformance Testing for the Network layer of
HiperMAN/WiMAX terminal devices;
Part 1: Protocol Implementation Conformance
Statement (PICS) proforma

---------------------- Page: 1 ----------------------
2 ETSI TS 102 624-1 V1.2.1 (2009-11)



Reference
RTS/BRAN-004T010-1
Keywords
HiperMAN, layer 3, PICS, terminal, testing
ETSI
650 Route des Lucioles
F-06921 Sophia Antipolis Cedex - FRANCE

Tel.: [phone]  Fax: [phone]

Siret N° 348 623 562 00017 - NAF 742 C
Association à but non lucratif enregistrée à la
Sous-Préfecture de Grasse (06) N° 7803/88

Important notice
Individual copies of the present document can be downloaded from:
http://www.etsi.org
The present document may be made available in more than one electronic version or in print. In any case of existing or
perceived difference in contents between such versions, the reference version is the Portable Document Format (PDF).
In case of dispute, the reference shall be the printing on ETSI printers of the PDF version kept on a specific network drive
within ETSI Secretariat.
Users of the present document should be aware that the document may be subject to revision or change of status.
Information on the current status of this and other ETSI documents is available at
http://portal.etsi.org/tb/status/status.asp
If you find errors in the present document, please send your comment to one of the following services:
http://portal.etsi.org/chaircor/ETSI_support.asp
Copyright Notification
No part may be reproduced except as authorized by written permission.
The copyright and the foregoing restriction extend to reproduction in all media.

© European Telecommunications Standards Institute 2009.
© WIMAX Forum 2009.
All rights reserved.

TM TM TM TM
DECT , PLUGTESTS , UMTS , TIPHON , the TIPHON logo and the ETSI logo are Trade Marks of ETSI registered
for the benefit of its Members.
TM
3GPP is a Trade Mark of ETSI registered for the benefit of its Members and of the 3GPP Organizational Partners.
LTE™ is a Trade Mark of ETSI currently being registered
for the benefit of its Members and of the 3GPP Organizational Partners.
GSM® and the GSM logo are Trade Marks registered and owned by the GSM Association.
ETSI

---------------------- Page: 2 ----------------------
3 ETSI TS 102 624-1 V1.2.1 (2009-11)
Contents
Intellectual Property Rights . 4
Foreword . 4
1 Scope . 5
2 References . 5
2.1 Normative references . 5
2.2 Informative references . 7
3 Definitions and abbreviations . 7
3.1 Definitions . 7
3.2 Abbreviations . 7
4 Conformance to this PICS Proforma Specification . 8
Annex A (normative): Protocol ICS (PICS) for HiperMAN/WiMAX terminal devices
Network layer . 9
A.1 Guidance for completing PICS Proforma. 9
A.1.1 Purposes and structure . 9
A.1.2 Abbreviations and conventions . 9
A.1.3 Instructions for completing the PICS Proforma . 11
A.2 Identification of the implementation . 11
A.2.1 Date of statement . 11
A.2.2 Implementation Under Test (IUT) identification . 11
A.2.3 System Under Test (SUT) identification . 11
A.2.4 Product supplier . 11
A.2.5 Client (if different from product supplier) . 12
A.2.6 PICS contact person . 12
A.3 Identification of the standard . 12
A.4 Global statement of conformance . 12
A.5 Mobile Station in WiMAX Network Architecture . 13
A.5.1 MS Capabilities . 13
A.5.2 Network Discovery and Selection . 13
A.5.3 Network Access Authentication . 14
A.5.4 IPv4 Address Management and Transport . 14
A.5.5 IPv6 Address Management and Transport . 16
A.5.6 OTA Provisioning and Activation . 17
A.5.7 Emergency Services . 19
A.5.8 Location Based Services . 20
A.5.9 IP-IMS interworking . 20
A.5.10 Multi-cast Broad-cast Services . 20
A.5.11 Messages . 21
Annex B (informative): Bibliography . 24
History . 25

ETSI

---------------------- Page: 3 ----------------------
4 ETSI TS 102 624-1 V1.2.1 (2009-11)
Intellectual Property Rights
IPRs essential or potentially essential to the present document may have been declared to ETSI. The information
pertaining to these essential IPRs, if any, is publicly available for ETSI members and non-members, and can be found
in ETSI SR 000 314: "Intellectual Property Rights (IPRs); Essential, or potentially Essential, IPRs notified to ETSI in
respect of ETSI standards", which is available from the ETSI Secretariat. Latest updates are available on the ETSI Web
server (http://webapp.etsi.org/IPR/home.asp).
Pursuant to the ETSI IPR Policy, no investigation, including IPR searches, has been carried out by ETSI. No guarantee
can be given as to the existence of other IPRs not referenced in ETSI SR 000 314 (or the updates on the ETSI Web
server) which are, or may be, or may become, essential to the present document.
Foreword
This Technical Specification (TS) has been produced by ETSI Technical Committee Broadband Radio Access
Networks (BRAN).
The present document specifies the Protocol Implementation Conformance Statement (PICS) of the Network layer
Release 1.5 for High Performance radio Metropolitan Area Network (HiperMAN) and WiMAX terminal devices.
The present document is part 1 of a multi-part deliverable covering HiperMAN; Conformance Testing for the Network
Layer of HiperMAN/WiMAX terminal devices, as identified below:
Part 1: "Protocol Implementation Conformance Statement (PICS) proforma";
Part 2: "Test Suite Structure and Test Purposes (TSS&TP)";
Part 3: "Abstract Test Suite (ATS)".
ETSI

---------------------- Page: 4 ----------------------
5 ETSI TS 102 624-1 V1.2.1 (2009-11)
1 Scope
The present document specifies the Protocol Implementation Conformance Statement (PICS) proforma for WiMAX
Network Layer Release 1.5 per ISO/IEC 9646-7 [23], ITU-T Recommendation X.296 [24] and EG 201 058 [i.4] for
conformance of HiperMAN1.3.1/WiMAX compliant terminals.
2 References
References are either specific (identified by date of publication and/or edition number or version number) or
non-specific.
• For a specific reference, subsequent revisions do not apply.
• Non-specific reference may be made only to a complete document or a part thereof and only in the following
cases:
- if it is accepted that it will be possible to use all future changes of the referenced document for the
purposes of the referring document;
- for informative references.
Referenced documents which are not found to be publicly available in the expected location might be found at
http://docbox.etsi.org/Reference.
NOTE: While any hyperlinks included in this clause were valid at the time of publication ETSI cannot guarantee
their long term validity.
2.1 Normative references
The following referenced documents are indispensable for the application of the present document. For dated
references, only the edition cited applies. For non-specific references, the latest edition of the referenced document
(including any amendments) applies.
[1] WiMAX Forum (Release 1.5): "WiMAX Forum Network Architecture, Stage 2: Architecture
Tenets, Reference Model and Reference Points, Base Specification".
NOTE: Available at http://www.wimaxforum.org/resources/documents/technical/release
[2] WiMAX Forum (Release 1.5): "WiMAX Forum Network Architecture, Stage 3: Detailed
Protocols and Procedures", Base Specification.
NOTE: Available at http://www.wimaxforum.org/resources/documents/technical/release
[3] IETF RFC 3484 (February 2003): "Default Address Selection for Internet Protocol version 6
(IPv6)".
[4] IETF RFS 5281 (August 2008): "Extensible Authentication Protocol Tunneled Transport Layer
Security Authenticated Protocol Version 0 (EAP-TTLSv0)".
[5] IETF RFC 2131 (March 1997): "Dynamic Host Configuration Protocol".
[6] IETF RFC 3748 (June 2004): "Extensible Authentication Protocol (EAP)".
[7] IETF RFC 4941 (September 2007): "Privacy Extensions for Stateless Address Autoconfiguration
in IPv6".
[8] IETF RFC 2464 (December 1998): "Transmission of IPv6 Packets over Ethernet Networks".
[9] IETF RFC 2759 (January 2000): "Microsoft PPP CHAP Extensions, Version 2".
[10] IETF RFC 5216 (March 2008): "The EAP-TLS Authentication Protocol".
ETSI

---------------------- Page: 5 ----------------------
6 ETSI TS 102 624-1 V1.2.1 (2009-11)
[11] IETF RFC 3024 (January 2001): "Reverse Tunneling for Mobile IP, revised".
[12] IETF RFC 3315 (July 2003): "Dynamic Host Configuration Protocol for IPv6 (DHCPv6)".
[13] IETF RFC 3344 (August 2002): "IP Mobility Support for IPv4".
[14] IETF RFC 3775 (June 2004): "Mobility Support in IPv6".
[15] IETF RFC 3776 (June 2004): "Using IPsec to Protect Mobile IPv6 Signaling Between Mobile
Nodes and Home Agents".
[16] IETF RFC 4187 (January 2006): "Extensible Authentication Protocol Method for 3rd Generation
Authentication and Key Agreement (EAP-AKA)".
[17] IETF RFC 4282 (December 2005): "The Network Access Identifier".
[18] IETF RFC 4862 (September 2007): "IPv6 Stateless Address Autoconfiguration".
[19] IETF RFC 4285 (January 2006): "Authentication Protocol for Mobile IPv6".
[20] IETF RFC 4294 (April 2006): "IPv6 Node Requirements".
[21] Void.
[22] ISO/IEC 9646-1: "Information technology - Open Systems Interconnection - Conformance testing
methodology and framework - Part 1: General concepts".
[23] ISO/IEC 9646-7: "Information technology - Open Systems Interconnection - Conformance testing
methodology and framework - Part 7: Implementation Conformance Statements".
[24] ITU-T Recommendation X.296: "OSI conformance testing methodology and framework for
protocol Recommendations for ITU-T applications - Implementation conformance statements".
[25] Void.
[26] WiMAX Forum (Release 1.5): "WiMAX Forum Network Architecture; Stage 3: Architecture,
detailed Protocols and Procedures: WiMAX Over-The-Air General Provisioning System
Specification".
NOTE: Available at http://www.wimaxforum.org/resources/documents/technical/release
[27] WiMAX Forum (Release 1.5): "WiMAX Forum Network Architecture; Stage 3: Architecture,
detailed Protocols and Procedures: Over-The-Air Provisioning & Activation Protocol based on
TR-069 Specification".
NOTE: Available at http://www.wimaxforum.org/resources/documents/technical/release
[28] WiMAX Forum (Release 1.5): "WiMAX Forum Network Architecture; Stage 3: Architecture,
detailed Protocols and Procedures; WiMAX Over-The-Air Provisioning & Activation Protocol
based on OMA DM Specifications".
NOTE: Available at http://www.wimaxforum.org/resources/documents/technical/release.
[29] WiMAX Forum (Release 1.5): "WiMAX Forum Network Architecture; Stage 3: Architecture,
detailed Protocols and Procedures; Emergency Services Support".
NOTE: Available at http://www.wimaxforum.org/resources/documents/technical/release.
[30] WiMAX Forum (Release 1.5): "WiMAX Forum Network Architecture; Stage 3: Architecture,
detailed Protocols and Procedures; IP Multimedia Subsystem (IMS) Interworking".
NOTE: Available at http://www.wimaxforum.org/resources/documents/technical/release
[31] WiMAX Forum (Release 1.5): "WiMAX Forum Network Architecture; Protocol and Procedures
for Location Based Services".
NOTE: Available at http://www.wimaxforum.org/resources/documents/technical/release
ETSI

---------------------- Page: 6 ----------------------
7 ETSI TS 102 624-1 V1.2.1 (2009-11)
[32] WiMAX Forum (Release 1.5): "WiMAX Forum Network Architecture; Stage 3: System
Requirements, Network Protocols and Architecture for Multi-cast Broad-cast Services".
NOTE: Available at http://www.wimaxforum.org/resources/documents/technical/release
[33] Broadband Forum (December 2007, Issue 1 Amnd. 2): "TR-069; CPE WAN Management
Protocol v1.1".
[34] IETF RFC 5246 (August 2008): "The Transport Layer Security (TLS) Protocol Version 1.2".
[35] IETF RFC 4279 (December 2005): "Pre-Shared Key Ciphersuites for Transport Layer Security
(TLS)".
[36] Open Mobile Alliance OMA-TS-ULP-V2-0-20080627-C (June 2008): "UserPlane Location
Protocol".
2.2 Informative references
The following referenced documents are not essential to the use of the present document but they assist the user with
regard to a particular subject area. For non-specific references, the latest version of the referenced document (including
any amendments) applies.
[i.1] IETF draft-ietf-mip6-hiopt-17 (May 2008): "DHCP Options for Home Information Discovery in
MIPv6".
[i.2] ETSI TS 102 624-2: "Broadband Radio Access Networks (BRAN); HiperMAN; Conformance
Testing for the Network layer of HiperMAN/WiMAX terminal devices;
Part 2: Test Suite Structure and Test Purposes (TSS&TP)".
[i.3] ETSI TS 102 624-3: "Broadband Radio Access Networks (BRAN); HiperMAN; Conformance
Testing for the Network layer of HiperMAN/WiMAX terminal devices; Part 3: Abstract Test
Suite (ATS)".
[i.4] ETSI EG 201 058: "Methods for Testing and Specification (MTS); Implementation Conformance
Statement (ICS) proforma style guide".
3 Definitions and abbreviations
3.1 Definitions
For the purposes of the present document, the terms and definitions given in ISO/IEC 9646-1 [22], WiMAX Forum
Network Architecture Stage 2 [1], WiMAX Forum Network Architecture Stage 3 [2], and ISO/IEC 9646-7 [23] apply.
3.2 Abbreviations
For the purposes of the present document, the abbreviations given in WiMAX Forum Network Architecture Stage 2 [1],
WiMAX Forum Network Architecture Stage 3 [2], ISO/IEC 9646-1 [22] and the following apply:
AR Access Router
ASN Access Service Network
BS Base Station
DAD Duplicate Address Detection
DNS Domain Name Service
IID Interface Identifier
IUT Implementation Under Test
PDU Protocol Data Unit
PICS Protocol Implementation Conformance Statement
MAC Medium Access Control
MS Mobile Station
ETSI

---------------------- Page: 7 ----------------------
8 ETSI TS 102 624-1 V1.2.1 (2009-11)
MTU Maximum Transmission Unit
NAI Network Access Identifier
NAP Network Access Provider
NSP Network Service Provider
SUT System Under Test
4 Conformance to this PICS Proforma Specification
If it claims to conform to the present document, the actual PICS proforma to be filled in by a supplier shall be
technically equivalent to the text of the PICS proforma given in annex A, and shall preserve the numbering, naming,
and ordering of the proforma items.
A PICS which conforms to the present document shall be a conforming PICS proforma completed in accordance with
the guidance for completion given in clause A.1.
ETSI

---------------------- Page: 8 ----------------------
9 ETSI TS 102 624-1 V1.2.1 (2009-11)
Annex A (normative):
Protocol ICS (PICS) for HiperMAN/WiMAX terminal devices
Network layer
Notwithstanding the provisions of the copyright clause related to the text of the present document, ETSI grants that
users of the present document may freely reproduce the PICS proforma in this annex so that it can be used for its
intended purposes and may further publish the completed PICS.
A.1 Guidance for completing PICS Proforma
A.1.1 Purposes and structure
The purpose of this PICS proforma is to provide a mechanism whereby a supplier of an implementation of the
requirements defined in defined in references [1] and [2] may provide information about the implementation in a
standardized manner.
The PICS proforma is subdivided into subclauses for the following categories of information:
• guidance for completing the PICS proforma;
• identification and implementation;
• identification of the standard;
• global statement of conformance;
• Mobile Station (MS);
• List of messages;
• Message Fields.
A.1.2 Abbreviations and conventions
Item column
• The Item column contains a number which identifies the item in the table.
Capability column
• The capability column describes in free text each respective item (e.g. parameters, timers, etc.). It implicitly
means "Is supported by the implementation?".
Reference column
• The reference column indicates the section of [1] and [2] from which the requirement for the capability is
derived and in some cases also the referenced IETF RFCs referenced in the base standard.
ETSI

---------------------- Page: 9 ----------------------
10 ETSI TS 102 624-1 V1.2.1 (2009-11)
Status column
• The following notations, defined in ISO/IEC 9646-1 [22], are used in the status column.
m Explicitly shown as mandatory in the standard. It is required to implement.
o Explicitly mentioned as optional in the standard or is not explicitly mentioned but has capability
negotiations. It may or may not be implemented.
oi Qualified option - for mutually exclusive or selectable options from a set. One or more of the options
from the set shall be supported.
IO-NNNN Inter-operable Options: Item belongs to NNNN group of features for which it is requested to provide
testing procedure and distinct labelling of BS equipment. More specifically:
- the item is not required to get general "WiMAX certified" label; and
- is required to get distinct "WiMAX certified with NNNN capability" label.

Support column
• The support column shall be filled in by the supplier of the implementation. The following common notations,
defined in ISO/IEC 9646-1 [22] are used for the support column.
Y or y Supported by implementation.
N or n Not supported by implementation.
N/A, n/a or - No answer required (allowed only if the status is n/a either directly or after the evaluation of a
conditional status).

Values allowed column
• The values allowed column is only used when necessary in a table. It contains the type, the list, the range, or
the length of values allowed. The following notations are used.
Range of values: .
Example: 5.20
List of values: , , …,
EXAMPLE 1: 2, 4, 6, 8, 9
EXAMPLE 2: 1101b, 1011b, 1111b
EXAMPLE 3: 0x0A, 0x34, 0x2F
List of named values: (), (), …, ()
Example: reject(1), accept(2)
Length: Size (.)
EXAMPLE: Size (1.8)

Values supported column
• The values supported column is only present when the values allowed column is present. It shall be filled in by
the supplier of the implementation. In this column, the value or the ranges of values supported by the
implementation shall be indicated.
Reference to items
• For each possible item answer in the support column within the PICS proforma a unique reference exists
which may be used, for example, in conditional expressions. It is defined as the table identifier, followed by
the "/" character, followed by the item number in the table. If there is more than one support column in a table,
the columns are discriminated by letters (a, b, etc.).
EXAMPLE 1: Table A.5/4 is the reference to the answer of item 4 in table A.5.
EXAMPLE 2: Table A.6/3b is the reference to the second answer (i.e. in the second support column) of
item 3 in table A.6.

Prerequisite Line
• A prerequisite line takes the form: Prerequisite: .
• A prerequisite line after a clause or table title indicates that the entire clause or the entire table is not required
to be completed if the predicate is FALSE.
ETSI

---------------------- Page: 10 ----------------------
11 ETSI TS 102 624-1 V1.2.1 (2009-11)
Support of specific MAC PDUs or fields does not automatically mean support of the corresponding functionality. It
means only that BS(MS) is capable of transmitting or receiving / parsing the message of specific format.
A.1.3 Instructions for completing the PICS Proforma
The supplier of the implementation shall complete the PICS proforma in each of the spaces provided. In particular, an
explicit answer shall be entered, in the support or values supported column boxes provided, using the notation described
in clause A.1.2.
If necessary, the supplier may provide additional comments in space at the bottom of the tables or separately.
A.2 Identification of the implementation
Identification of the Implementation Under Test (IUT) and the system in which it resides (the System Under Test
(SUT)) should be filled in so as to provide as much detail as possible regarding version numbers and configuration
options.
The product supplier and client information should both be filled in if they are different.
A person who can answer queries regarding information supplied in the PICS should be named as the contact person.
A.2.1 Date of statement
Date of statement

(MM/DD/YYYY):

A.2.2 Implementation Under Test (IUT) identification
IUT name:

IUT version:


A.2.3 System Under Test (SUT) identification
SUT name:


Hardware configuration:


Operating system:

A.2.4 Product supplier
Name:



Address:

Telephone Nr.:
Fax Nr:
E-mail address:

Additional information:


ETSI

---------------------- Page: 11 ----------------------
12 ETSI TS 102 624-1 V1.2.1 (2009-11)
A.2.5 Client (if different from product supplier)
Name:



Address:

Telephone Nr.:
Fax Nr:
E-mail address:

Additional information:


A.2.6 PICS contact person
(A person to contact if there are any queries concerning the content of the PICS.)
Name:



Address:

Telephone Nr.:
Fax Nr:
E-mail address:

Additional information:


A.3 Identification of the standard
This PICS proforma applies to the ETSI HiperMAN/Wimax Forum standard consisting of the following normative
references:
• WiMAX Forum Network Architecture
A.4 Global statement of conformance
Are all mandatory capabilities implemented? (Yes/No)

NOTE: Answering "No" to this question indicates non-conformance to the HiperMAN/Wimax standard.
Non-supported mandatory capabilities are to be identified in the PICS, with an explanation of why the
implementation is non-conforming, on pages attached to the PICS proforma.
ETSI

---------------------- Page: 12 ----------------------
13 ETSI TS 102 624-1 V1.2.1 (2009-11)
A.5 Mobile Station in WiMAX Network Architecture
A.5.1 MS Capabilities
Table A.1: MS Capabilities
Item MS Capability Reference Status Support
1
Network Discovery and Selection [2] 4.1 m
2 Network Access Authentication [2] 4.4.1 m
3 IPv4 Address Management and Transport [2] 4.2, 4.8 m
4 IPv6 Address Management and Transport [2] 4.8.4, o
4.11
5
OTA Provisioning and Activation [26] m
6
Emergency Services [29] 7.1 o
7
IP IMS interworking [30] o
8 Location Based Services [31] o
9 Multi-cast Broad-cast Services [32] o
Comments:

A.5.2 Network Discovery and Selection
Table A.2: Network Discovery and Selection
Item Procedures Reference Status Support
1 Network Access Provider (NAP) Discovery [2] 4.1.2.1 m
2 Network Service Provider (NSP) Discovery [2] 4.1.2.2 m
3 Network Service Provider (NSP) Selection [2] 4.1.2.3 m
4
Access Service Network (ASN) attachment [2] 4.1.2.4 m
Comments:

Table A.3: NSP selection
Item NSP Selection Method Reference Status Support
1
Manual Mode NSP Selection [2] 4.1.2.1 o.3
2 Automatic Mode NSP Selection [2] 4.1.2.2 o.3
o.3: It is mandatory to support at least one of these items.

Table A.4: ASN Attachment
Item ASN Attachment Feature Reference Status Support
1 NAI Construction [2] 4.1.2.4, m
4.4.1.3,
[17] 2
2
Locally Configured 24-bit NSP Identifier To Realm Mapping [2] 4.1.2.4, o
[17] 2
Comments: These capabilities are related to the ASN attachment capability item in Table A.2/4.


ETSI

---------------------- Page: 13 ----------------------
14 ETSI TS 102 624-1 V1.2.1 (2009-11)
A.5.3 Network Access Authentication
Table A.5: Network Access Authentication
Item Authentication Entity Reference Status Support
1 Subscriber Authentication [2] 4.4.1.1 m
2
Device Authentication [2] 4.4.1.1 m
Comments: The MS shall support authentication of Device credentials independent of whether the HNSP requires device
authentication.

Table A.6: Subscriber Authentication
Item Authentication Method Reference Status Support
1 EAP-AKA Subscriber Authentication [2] 4.4.1.2 o.6
2 EAP-TTLS Subscriber Authentication [2] 4.4.1.2 o.6
o.6: It is mandatory to support at least one of these items.

Table A.7: Device Authentication
Item Authentication Method Reference Status Support
1 EAP-TLS Device Authentication [2] 4.4.1.2 m

Table A.8: EAP-TTLS Subscriber Authentication
Prerequisite: A6/2 - EAP-TTLS Subscriber Authentication
Item EAP-TTLS Method Reference Status Support
1 TTLS Version 0 [2] 4.4.1.2.3, m
[4] 7
2
MS-CHAPv2 [2] 4.4.1.2.3, m
[9] 1
3 Fragmentation [2] 4.4.1.2.3, m
[10] 2.1.5

A.5.4 IPv4 Address Management and Transport
Table A.9: IPv4 Address Management
Item Mobility Management Capability Reference Status Support
1 Proxy MIPv4 (PMIP4) Mobility Management [2] 4.8.2.1 o.9
2 Client MIPv4 (CMIP4) Mobility Management [2] 4.8.3.1 o.9
3 Simple IPv4 Service [2] 4.14.4.1 o.9

o.9: It is mandatory to support at least one of these items.
Note: For Simple IPv4 Service CSN anchored mobility service is not supported [1] 7.13.

Table A.10: IPv4 Transport
Item IPv4 Transport Capability Reference Status Support
1 IPv4 Fragmentation with MTU Size [2] 3.3.3 m

ETSI

---------------------- Page: 14 ----------------------
15 ETSI TS 102 624-1 V1.2.1 (2009-11)
Table A.11: PM
...