ETSI TS 144 014 V13.1.0 (2016-08)

Digital cellular telecommunications system (Phase 2+) (GSM); Individual equipment type requirements and interworking; Special conformance testing functions (3GPP TS 44.014 version 13.1.0 Release 13)

RTS/TSGG-0244014vd10

General Information

• Status: Published
• Publication Date: 01-Aug-2016
• Technical Committee: 3GPP GERAN 2 - Protocol aspects
• Current Stage: 12 - Completion
• Completion Date: 02-Aug-2016

Standards Content (Sample)

ETSI TS 1144 014 V13.1.0 (201616-08)






TECHNICAL SPECIFICATIONION
Digital cellular telecommmmunications system (Phase e 2+) (GSM);
Individual equipment t type requirements and interterworking;
Special confnformance testing functions
(3GPP TS 44.0.014 version 13.1.0 Release 13 13)

R
GLOBAL SYSTTEME FOR
MOBILE COMMUUNNICATIONS

---------------------- Page: 1 ----------------------
3GPP TS 44.014 version 13.1.0 Release 13 1 ETSI TS 144 014 V13.1.0 (2016-08)



Reference
RTS/TSGG-0244014vd10
Keywords
GSM
ETSI
650 Route des Lucioles
F-06921 Sophia Antipolis Cedex - FRANCE

Tel.: [phone]  Fax: [phone]

Siret N° 348 623 562 00017 - NAF 742 C
Association à but non lucratif enregistrée à la
Sous-Préfecture de Grasse (06) N° 7803/88

Important notice
The present document can be downloaded from:
http://www.etsi.org/standards-search
The present document may be made available in electronic versions and/or in print. The content of any electronic and/or
print versions of the present document shall not be modified without the prior written authorization of ETSI. In case of any
existing or perceived difference in contents between such versions and/or in print, the only prevailing document is the
print of the Portable Document Format (PDF) version kept on a specific network drive within ETSI Secretariat.
Users of the present document should be aware that the document may be subject to revision or change of status.
Information on the current status of this and other ETSI documents is available at
https://portal.etsi.org/TB/ETSIDeliverableStatus.aspx
If you find errors in the present document, please send your comment to one of the following services:
https://portal.etsi.org/People/CommiteeSupportStaff.aspx
Copyright Notification
No part may be reproduced or utilized in any form or by any means, electronic or mechanical, including photocopying
and microfilm except as authorized by written permission of ETSI.
The content of the PDF version shall not be modified without the written authorization of ETSI.
The copyright and the foregoing restriction extend to reproduction in all media.

© European Telecommunications Standards Institute 2016.
All rights reserved.

TM TM TM
DECT , PLUGTESTS , UMTS and the ETSI logo are Trade Marks of ETSI registered for the benefit of its Members.
TM
3GPP and LTE™ are Trade Marks of ETSI registered for the benefit of its Members and
of the 3GPP Organizational Partners.
GSM® and the GSM logo are Trade Marks registered and owned by the GSM Association.
ETSI

---------------------- Page: 2 ----------------------
3GPP TS 44.014 version 13.1.0 Release 13 2 ETSI TS 144 014 V13.1.0 (2016-08)
Intellectual Property Rights
IPRs essential or potentially essential to the present document may have been declared to ETSI. The information
pertaining to these essential IPRs, if any, is publicly available for ETSI members and non-members, and can be found
in ETSI SR 000 314: "Intellectual Property Rights (IPRs); Essential, or potentially Essential, IPRs notified to ETSI in
respect of ETSI standards", which is available from the ETSI Secretariat. Latest updates are available on the ETSI Web
server (https://ipr.etsi.org/).
Pursuant to the ETSI IPR Policy, no investigation, including IPR searches, has been carried out by ETSI. No guarantee
can be given as to the existence of other IPRs not referenced in ETSI SR 000 314 (or the updates on the ETSI Web
server) which are, or may be, or may become, essential to the present document.
Foreword
This Technical Specification (TS) has been produced by ETSI 3rd Generation Partnership Project (3GPP).
The present document may refer to technical specifications or reports using their 3GPP identities, UMTS identities or
GSM identities. These should be interpreted as being references to the corresponding ETSI deliverables.
The cross reference between GSM, UMTS, 3GPP and ETSI identities can be found under
http://webapp.etsi.org/key/queryform.asp.
Modal verbs terminology
In the present document "shall", "shall not", "should", "should not", "may", "need not", "will", "will not", "can" and
"cannot" are to be interpreted as described in clause 3.2 of the ETSI Drafting Rules (Verbal forms for the expression of
provisions).
"must" and "must not" are NOT allowed in ETSI deliverables except when used in direct citation.
ETSI

---------------------- Page: 3 ----------------------
3GPP TS 44.014 version 13.1.0 Release 13 3 ETSI TS 144 014 V13.1.0 (2016-08)
Contents
Intellectual Property Rights . 2
Foreword . 2
Modal verbs terminology . 2
Foreword . 6
1 Scope . 7
1.1 Conventions . 7
2 References . 7
3 Definitions, conventions, and applicability . 8
3.1 Mobile station definition and configurations . 8
3.2 Applicability . 8
4 Activation and deactivation of special test functions in the MS . 8
5 Internal test loops . 9
5.1 Single-slot TCH loops . 10
5.1.1 Purpose of Single-slot TCH loops . 10
5.1.2 TCH loop including signalling of erased frames (A) . 10
5.1.2.1 Procedure . 10
5.1.3 Speech TCH loop without signalling of erased frames (B) . 12
5.1.3.1 Procedure . 12
5.1.4 TCH burst-by-burst loop (C) . 13
5.1.4.1 Applicability. 13
5.1.4.2 Procedure . 13
5.1.4.3 Establishment . 13
5.1.4.4 Operation . 13
5.1.5 TCH loop including signalling of erased frames and unreliable frames (D) . 14
5.1.5.1 Procedure . 14
5.1.6 TCH loop including signalling of erased SID frames (E) . 14
5.1.6.1 Procedure . 14
5.1.7 TCH loop including signalling of erased valid SID frames (F) . 15
5.1.7.1 Procedure . 15
5.1.7a TCH loop without signalling of erased frames for in-band channel error rate (I). 15
5.1.7a.1 Procedure . 15
5.1.8 Additional non-mandatory operating characteristics for single-slot loops . 16
5.2 Multi-slot TCH loops . 16
5.2.1 Purpose of Multi-slot TCH loops . 16
5.2.2 Multi-slot TCH burst-by-burst loop (G) . 17
5.2.2.1 Procedure . 17
5.2.3 Multi-slot TCH loop including signalling of erased frames (H) . 18
5.2.3.1 Procedure . 18
5.3 Deactivating loops . 18
5.3.1 Deactivating Single-slot TCH loops . 18
5.3.2 Deactivating Multi-slot TCH loops . 18
5.4 Multi-slot test mode for GPRS & EGPRS . 18
5.4.1 Initiation . 19
5.4.1.1 MS Declaration . 19
5.4.1.2 Establishment of uplink TBF . 19
5.4.2 Operation . 19
5.4.2.1 MS Operating in mode a) . 19
5.4.2.2 MS Operating in mode b) . 20
5.4.2.3 Operational constraints applying to both modes . 20
5.4.3 Termination. 20
5.4.4 PN Sequence Definition . 21
5.4.5 Optional Multi-slot operation . 21
ETSI

---------------------- Page: 4 ----------------------
3GPP TS 44.014 version 13.1.0 Release 13 4 ETSI TS 144 014 V13.1.0 (2016-08)
5.5 EGPRS Switched Radio Block Loopback Mode. 21
5.5.1 Initiation . 22
5.5.2 Operation . 22
5.5.3 Termination. 24
5.5.4 Support of EGPRS MS without 8PSK modulation capability in uplink . 24
5.5.5 Optional Multi-slot operation . 24
5.5.6 Support of EGPRS2-A MS . 24
6 Activating and deactivating EMMI . 24
7 Activating and deactivating DAI tests . 25
8 Message definitions and contents . 25
8.1 CLOSE_TCH_LOOP_CMD . 26
8.2 CLOSE_TCH_LOOP_ACK. 26
8.3 OPEN_LOOP_CMD . 27
8.4 CLOSE_Multi-slot_LOOP_CMD . 27
8.5 CLOSE_Multi-slot_LOOP_ACK . 28
8.6 OPEN_Multi-slot_LOOP_CMD . 29
8.7 OPEN_Multi-slot_LOOP_ACK . 29
8.8 Command for the activation of the EMMI, ACT_EMMI_CMD . 29
8.9 Acknowledge of the activation of the EMMI, ACT_EMMI_ACK . 29
8.10 Deactivation of the EMMI, DEACT_EMMI. 30
8.11 Test_Interface . 30
8.12 Timer values . 30
8.13 GPRS_TEST_MODE_CMD . 31
8.14 EGPRS_START_RADIO_BLOCK_LOOPBACK_CMD . 32
8.15 RESET MS POSITIONING STORED INFORMATION. 33
9 Electrical Man Machine Interface (EMMI) . 33
9.1 Use of the EMMI . 33
9.2 Formal aspects . 33
9.3 Layered structure of the interface . 34
9.4 Terminology . 34
9.5 Description of the EMMI . 34
9.5.1 EMMI, Layer 1 . 34
9.5.1.1 Mechanical and electrical characteristics . 34
9.5.1.2 Transmission and reception characteristics . 34
9.5.2 EMMI, layer 2 . 35
9.5.2.1 General structure . 35
9.5.2.2 Control frames . 35
9.5.2.3 Frame structure . 35
9.5.2.4 Flow of I-frames on layer 2 . 36
9.5.2.4.1 Transmission of frames . 36
9.5.2.4.2 Reception of frames . 36
9.5.2.4.3 Use of ACK and NAK on receiving side . 36
9.5.2.4.4 Use of XON and XOF . 36
9.5.2.4.5 Parameters on layer 2 . 36
9.5.3 EMMI, layer 3 . 37
9.5.3.1 Message structure . 37
9.5.3.2 Definition of messages . 38
10 Digital audio interface . 42
10.1 General . 42
10.2 Formal aspects . 42
10.3 Hardware aspect of the interface . 42
10.3.1 Mechanical characteristics of the interface . 43
10.3.2 Electrical characteristics of the interface . 43
10.3.3 Timing characteristics of the interface . 43
10.4 Logical interface . 44
10.5 Functionality of the DAI . 44
11 SIM/ME test interface . 45
11.1 General . 45
ETSI

---------------------- Page: 5 ----------------------
3GPP TS 44.014 version 13.1.0 Release 13 5 ETSI TS 144 014 V13.1.0 (2016-08)
11.2 Formal aspects . 45
11.3 Hardware and logical aspects of the interface . 45
11.4 Mechanical characteristics of the interface. 45
12 Reset MS Positioning Stored Information . 47
12.1 General . 47
12.2 Procedure . 47
13 GAN security certificate . 48
13.1 General . 48
13.2 Formal aspects . 48
Annex A (informative): Change History . 49
History . 50

ETSI

---------------------- Page: 6 ----------------------
3GPP TS 44.014 version 13.1.0 Release 13 6 ETSI TS 144 014 V13.1.0 (2016-08)
Foreword
rd
This Technical Specification has been produced by the 3 Generation Partnership Project (3GPP).
The contents of the present document are subject to continuing work within the TSG and may change following formal
TSG approval. Should the TSG modify the contents of the present document, it will be re-released by the TSG with an
identifying change of release date and an increase in version number as follows:
Version x.y.z
where:
x the first digit:
1 presented to TSG for information;
2 presented to TSG for approval;
3 or greater indicates TSG approved document under change control.
y the second digit is incremented for all changes of substance, i.e. technical enhancements, corrections,
updates, etc.
z the third digit is incremented when editorial only changes have been incorporated in the document.
ETSI

---------------------- Page: 7 ----------------------
3GPP TS 44.014 version 13.1.0 Release 13 7 ETSI TS 144 014 V13.1.0 (2016-08)
1 Scope
The present document specifies for Mobile Stations (MS), for the digital cellular communications system and Personal
Communication Systems (PCS) operating in the 900 MHz and 1800 MHz band (GSM900 and DCS1800), standardized
rd
by 3 Generation Partnership Project (3GPP), those ME functions which are required for conformance testing purposes
only. However, except for the Electrical Man Machine Interface (EMMI) and the Multi-slot TCH Loops, they are
required for every mobile station.
For conformance tests, functions are activated via the radio interface, test SIM or dedicated pins. These functions must
be capable of being activated when a test SIM is present but must not function with any other (e.g. network) SIM
present except where otherwise stated within the present document. In this state, the MS must be able to perform all
functions specified in the present document; in addition however, the special conformance testing functions must be
operational.
The special conformance testing functions of the ME are enabled by use of a dedicated Subscriber Identity Module (test
SIM, see 3GPP TS 51.010-1 Annex 4). SIM, in general, is described in 3GPP TS 51.011. The ME recognizes the test
SIM by the Administrative Data Field.
The present document applies to the public land mobile radio service in the GSM900 and DCS1800 systems, using
constant envelope modulation and operating on radio frequencies in the 900 and 1800 MHz bands respectively with a
channel separation of 200 kHz and carrying 8 full rate channels or 16 half rate channels per carrier according to the
TDMA principle.
The present document is part of the 3GPP TS series of technical specifications. The present document neither replaces
any of the other GSM technical specifications or GSM related TS, nor is it created to provide full understanding of (or
parts of) the GSM900 and DCS1800 systems.
The present document applies to the unit which includes the hardware to establish a connection across the radio
interface.
1.1 Conventions
Unless explicitly stated otherwise, the following conventions apply:
- "EGPRS" refers to "EGPRS and EGPRS2".
- "EGPRS2" refers to "EGPRS2-A and EGPRS2-B".
2 References
The following documents contain provisions which, through reference in this text, constitute provisions of the present
document.
• References are either specific (identified by date of publication, edition number, version number, etc.) or
non-specific.
• For a specific reference, subsequent revisions do not apply.
• For a non-specific reference, the latest version applies. In the case of a reference to a 3GPP document (including
a GSM document), a non-specific reference implicitly refers to the latest version of that document in the same
Release as the present document.
[1] 3GPP TS 21.905: "Vocabulary for 3GPP Specifications".
[2] 3GPP TS 24.007: "Mobile radio interface signalling layer 3; General aspects".
[3] 3GPP TS 44.018: "Mobile radio interface layer 3 specification; Radio Resource Control Protocol".
ETSI

---------------------- Page: 8 ----------------------
3GPP TS 44.014 version 13.1.0 Release 13 8 ETSI TS 144 014 V13.1.0 (2016-08)
[4] 3GPP TS 51.010: "Mobile Station (MS) conformity specification".
[5] 3GPP TS 51.011: "Specification of the Subscriber Identity Module - Mobile Equipment (SIM -
ME) interface".
[6] (void).
[7] 3GPP TS 34.109: "Logical Test Interface (FDD) Special conformance testing functions".
[8] 3GPP TS 22.101: "UMTS Service principles".
[9] 3GPP TS 45.010: "Radio subsystem synchronization".
[11] CCITT recommendation O.153 Fascicle IV.4, (Basic parameters for the measurement of error
performance at bit rates below the primary rate, Melbourne 1988)
[12] 3GPP TS 43.064: "Overall description of the GPRS radio interface; Stage 2".
3 Definitions, conventions, and applicability
For abbreviations and acronyms, see 3GPP TS 21.905.
3.1 Mobile station definition and configurations
In the present document, a MS can be:
- a vehicle mounted station;
- a portable station;
- a handheld station;
- a vehicle mounted/portable station;
- a vehicle mounted/handheld station.
For a more detailed description of MS-configurations, see 3GPP TS 22.101.
3.2 Applicability
The present document is applicable to all MSs.
4 Activation and deactivation of special test functions in
the MS
The functions described in the present document can be activated and deactivated from a SS by sending appropriate
layer 3 commands to the MS. The protocol discriminator to be used is defined in 3GPP TS 44.018, sub-clause 10.2.
The layer 3 commands are sent on the DCCH. On layer 2, SAPI 0 is used in acknowledged mode.
Apart from sending the appropriate deactivation command to the MS the functions can be deactivated by switching off
the MS or removing the test SIM.
The following test functions can be activated (and deactivated):
- TCH Loop;
- TCH Burst-by-Burst Loop;
ETSI

---------------------- Page: 9 ----------------------
3GPP TS 44.014 version 13.1.0 Release 13 9 ETSI TS 1
...