ETSI EN 301 908-22 V6.1.1 (2016-07)

IMT cellular networks; Harmonised Standard covering the essential requirements of article 3.2 of the Directive 2014/53/EU; Part 22: OFDMA TDD WMAN (Mobile WiMAXTM) FDD Base Stations (BS)

REN/MSG-TFES-11-22-RED

Celična omrežja IMT - Harmonizirani standard, ki zajema bistvene zahteve člena 3.2 direktive 2014/53/EU - 22. del: Bazne postaje FDD OFDMA TDD WMAN (mobilni WiMAXTM)

Ta dokument vsebuje zahteve, s katerimi se dokazuje, da radijska oprema učinkovito uporablja radijski spekter in tudi podpira njegovo učinkovito uporabo, tako da ne pride do škodljivih motenj.
Poleg tega dokumenta se lahko za opremo na področju uporabe tega dokumenta uporabljajo tudi drugi standardi EN, ki določajo tehnične zahteve v zvezi z bistvenimi zahtevami iz drugih delov 3. člena direktive o radijski opremi 2014/53/EU [i.2].

General Information

• Status: Published
• Publication Date: 08-Dec-2016
• Technical Committee: MSG TFES - Task Force for European Standards for IMT-2000
• Current Stage: 12 - Citation in the OJ
• Due Date: 12-Dec-2016
• Completion Date: 09-Dec-2016
• Ref Project: SIST EN 301 908-22 V6.1.1:2016 - IMT cellular networks - Harmonised Standard covering the essential requirements of article 3.2 of the Directive 2014/53/EU - Part 22: OFDMA TDD WMAN (Mobile WiMAXTM) FDD Base Stations (BS)

Standards Content (Sample)

2003-01.Slovenski inštitut za standardizacijo. Razmnoževanje celote ali delov tega standarda ni dovoljeno.:L0$;70IMT cellular networks - Harmonised Standard covering the essential requirements of article 3.2 of the Directive 2014/53/EU - Part 22: OFDMA TDD WMAN (Mobile WiMAXTM) FDD Base Stations (BS)33.070.99Druge mobilne storitveOther mobile services33.060.99Druga oprema za radijske komunikacijeOther equipment for radiocommunicationsICS:Ta slovenski standard je istoveten z:ETSI EN 301 908-22 V6.1.1 (2016-07)SIST EN 301 908-22 V6.1.1:2016en01-oktober-2016SIST EN 301 908-22 V6.1.1:2016SLOVENSKI
STANDARD



SIST EN 301 908-22 V6.1.1:2016



ETSI EN 301 908-22 V6.1.1 (2016-07) IMT cellular networks; Harmonised Standard covering the essential requirements of article 3.2 of the Directive 2014/53/EU; Part 22: OFDMA TDD WMAN (Mobile WiMAXTM) FDD Base Stations (BS)
HARMONISED EUROPEAN STANDARD SIST EN 301 908-22 V6.1.1:2016



ETSI ETSI EN 301 908-22 V6.1.1 (2016-07)2
Reference REN/MSG-TFES-11-22-RED Keywords 3G, cell, digital, FDD, IMT, IMT-2000, mobile, radio, regulation, WiMAX ETSI 650 Route des Lucioles F-06921 Sophia Antipolis Cedex - FRANCE
Tel.: [phone]
Fax: [phone]
Siret N° 348 623 562 00017 - NAF 742 C Association à but non lucratif enregistrée à la Sous-Préfecture de Grasse (06) N° 7803/88
Important notice The present document can be downloaded from: http://www.etsi.org/standards-search The present document may be made available in electronic versions and/or in print. The content of any electronic and/or print versions of the present document shall not be modified without the prior written authorization of ETSI. In case of any existing or perceived difference in contents between such versions and/or in print, the only prevailing document is the print of the Portable Document Format (PDF) version kept on a specific network drive within ETSI Secretariat. Users of the present document should be aware that the document may be subject to revision or change of status. Information on the current status of this and other ETSI documents is available at https://portal.etsi.org/TB/ETSIDeliverableStatus.aspx If you find errors in the present document, please send your comment to one of the following services: https://portal.etsi.org/People/CommiteeSupportStaff.aspx Copyright Notification No part may be reproduced or utilized in any form or by any means, electronic or mechanical, including photocopying and microfilm except as authorized by written permission of ETSI. The content of the PDF version shall not be modified without the written authorization of ETSI. The copyright and the foregoing restriction extend to reproduction in all media.
© European Telecommunications Standards Institute 2016. All rights reserved.
DECTTM, PLUGTESTSTM, UMTSTM and the ETSI logo are Trade Marks of ETSI registered for the benefit of its Members. 3GPPTM and LTE™ are Trade Marks of ETSI registered for the benefit of its Members and of the 3GPP Organizational Partners. GSM® and the GSM logo are Trade Marks registered and owned by the GSM Association. SIST EN 301 908-22 V6.1.1:2016



ETSI ETSI EN 301 908-22 V6.1.1 (2016-07)3 Contents Intellectual Property Rights . 6 Foreword . 6 Modal verbs terminology . 6 Introduction . 6 1 Scope . 7 2 References . 7 2.1 Normative references . 7 2.2 Informative references . 7 3 Definitions, symbols and abbreviations . 8 3.1 Definitions . 8 3.2 Symbols . 9 3.3 Abbreviations . 10 4 Technical requirements specification . 10 4.1 Environmental profile . 10 4.2 Conformance requirements . 10 4.2.1 Introduction. 10 4.2.2 Spectrum emission mask . 11 4.2.2.1 Definition . 11 4.2.2.2 Limits . 11 4.2.2.2.1 Requirements for 5 MHz channel bandwidth . 11 4.2.2.2.2 Requirements for 10 MHz channel bandwidth . 11 4.2.2.3 Conformance . 12 4.2.3 Transmitter Adjacent Channel Leakage power Ratio (ACLR) . 12 4.2.3.1 Definition . 12 4.2.3.2 Limits . 12 4.2.3.2.1 ACLR requirements for 5 MHz channel bandwidth . 12 4.2.3.2.2 ACLR requirements for 10 MHz channel bandwidth . 12 4.2.3.3 Conformance . 12 4.2.4 Transmitter spurious emissions . 13 4.2.4.1 Definition . 13 4.2.4.2 Limits . 13 4.2.4.2.0 General requirements . 13 4.2.4.2.1 Requirements for 5 MHz channel bandwidth . 13 4.2.4.2.2 Requirements for 10 MHz channel bandwidth . 13 4.2.4.2.3 Additional Spurious Emission Requirements . 14 4.2.4.2.4 Protection of the BS receiver of own or different BS . 14 4.2.4.3 Conformance . 14 4.2.5 Base station maximum output power . 14 4.2.5.1 Definition . 14 4.2.5.2 Limits . 14 4.2.5.3 Conformance . 15 4.2.6 Transmitter Intermodulation . 15 4.2.6.1 Definition . 15 4.2.6.2 Limits . 15 4.2.6.3 Conformance . 15 4.2.7 Receiver spurious emissions . 15 4.2.7.1 Definition . 15 4.2.7.2 Limits . 15 4.2.7.3 Conformance . 16 4.2.8 Receiver Adjacent Channel Selectivity (ACS) . 16 4.2.8.1 Definition . 16 4.2.8.2 Limits . 16 4.2.8.3 Conformance . 16 4.2.9 Receiver blocking characteristics . 17 SIST EN 301 908-22 V6.1.1:2016



ETSI ETSI EN 301 908-22 V6.1.1 (2016-07)4 4.2.9.1 Definition . 17 4.2.9.2 Limits . 17 4.2.9.3 Conformance . 18 4.2.10 Receiver intermodulation characteristics . 18 4.2.10.1 Definition and applicability . 18 4.2.10.2 Limits . 18 4.2.10.3 Conformance . 19 4.2.11 Receiver reference sensitivity level . 19 4.2.11.1 Definition . 19 4.2.11.2 Limits . 19 5 Testing for compliance with technical requirements . 19 5.1 Environmental conditions for testing . 19 5.2 Product information . 20 5.3 Interpretation of the measurement results . 20 5.4 Essential radio test suites . 21 5.4.1 Transmitter Spectrum Emission Mask . 21 5.4.1.1 Method of measurement . 21 5.4.1.1.1 Initial conditions . 22 5.4.1.1.2 Procedure . 22 5.4.1.2 Test requirements . 22 5.4.2 Transmitter Adjacent Channel Leakage Power Ratio . 23 5.4.2.1 Method of measurement . 23 5.4.2.1.1 Initial conditions . 23 5.4.2.1.2 Procedure . 23 5.4.2.2 Test requirements . 24 5.4.3 Transmitter spurious emissions . 24 5.4.3.1 Method of measurement . 24 5.4.3.1.1 Initial conditions . 25 5.4.3.1.2 Procedure . 25 5.4.3.2 Test requirements . 25 5.4.4 Base Station maximum output power . 25 5.4.4.1 Method of measurement . 26 5.4.4.1.1 Initial conditions . 26 5.4.4.1.2 Procedure . 26 5.4.4.2 Test requirements . 26 5.4.5 Transmitter Intermodulation . 27 5.4.5.1 Method of measurement . 27 5.4.5.1.1 Initial conditions . 27 5.4.5.1.2 Procedure . 27 5.4.5.2 Test requirements . 27 5.4.6 Receiver spurious emissions . 28 5.4.6.1 Method of measurement . 28 5.4.6.1.1 Initial conditions . 28 5.4.6.1.2 Procedure . 28 5.4.6.2 Test requirements . 29 5.4.7 Receiver Adjacent Channel Selectivity (ACS) . 29 5.4.7.1 Method of measurement . 29 5.4.7.1.1 Initial conditions . 29 5.4.7.1.2 Procedure . 29 5.4.7.2 Test requirements . 30 5.4.8 Receiver blocking characteristics . 30 5.4.8.1 Method of measurement . 30 5.4.8.1.1 Initial conditions . 31 5.4.8.1.2 Procedure . 31 5.4.8.2 Test requirements . 31 5.4.9 Receiver intermodulation characteristics . 31 5.4.9.1 Method of measurement . 32 5.4.9.1.1 Initial conditions . 32 5.4.9.1.2 Procedure . 32 5.4.9.2 Test requirements . 33 5.4.10 Receiver reference sensitivity level . 33 SIST EN 301 908-22 V6.1.1:2016



ETSI ETSI EN 301 908-22 V6.1.1 (2016-07)5 5.4.10.1 Method of test . 33 5.4.10.2 Test requirement . 33 Annex A (normative): Relationship between the present document and the essential requirements of Directive 2014/53/EU . 34 Annex B (normative): Environmental profile specification . 35 Annex C (informative): Void . 36 Annex D (informative): Bibliography . 37 History . 38
SIST EN 301 908-22 V6.1.1:2016



ETSI ETSI EN 301 908-22 V6.1.1 (2016-07)6 Intellectual Property Rights IPRs essential or potentially essential to the present document may have been declared to ETSI. The information pertaining to these essential IPRs, if any, is publicly available for ETSI members and non-members, and can be found in ETSI SR 000 314: "Intellectual Property Rights (IPRs); Essential, or potentially Essential, IPRs notified to ETSI in respect of ETSI standards", which is available from the ETSI Secretariat. Latest updates are available on the ETSI Web server (https://ipr.etsi.org/). Pursuant to the ETSI IPR Policy, no investigation, including IPR searches, has been carried out by ETSI. No guarantee can be given as to the existence of other IPRs not referenced in ETSI SR 000 314 (or the updates on the ETSI Web server) which are, or may be, or may become, essential to the present document. Foreword This Harmonised European Standard (EN) has been produced by ETSI Technical Committee Mobile Standards Group (MSG). The present document has been prepared under the Commission's standardisation request C(2015) 5376 final [i.7] to provide one voluntary means of conforming to the essential requirements of Directive 2014/53/EU on the harmonisation of the laws of the Member States relating to the making available on the market of radio equipment and repealing Directive 1999/5/EC [i.2]. Once the present document is cited in the Official Journal of the European Union under that Directive, compliance with the normative clauses of the present document given in table A-1 confers, within the limits of the scope of the present document, a presumption of conformity with the corresponding essential requirements of that Directive, and associated EFTA regulations. The present document is part 22 of a multi-part deliverable. Full details of the entire series can be found in part 1 [i.8].
National transposition dates Date of adoption of this EN: 12 July 2016 Date of latest announcement of this EN (doa): 31 October 2016 Date of latest publication of new National Standard or endorsement of this EN (dop/e):
30 April 2017 Date of withdrawal of any conflicting National Standard (dow): 30 April 2018
Modal verbs terminology In the present document "shall", "shall not", "should", "should not", "may", "need not", "will", "will not", "can" and "cannot" are to be interpreted as described in clause 3.2 of the ETSI Drafting Rules (Verbal forms for the expression of provisions). "must" and "must not" are NOT allowed in ETSI deliverables except when used in direct citation. Introduction The present document is part of a set of standards developed by ETSI that are designed to fit in a modular structure to cover radio equipment within the scope of the Radio Equipment Directive [i.2]. The present document is produced following the guidance in ETSI EG 203 336 [i.3] as applicable. SIST EN 301 908-22 V6.1.1:2016



ETSI ETSI EN 301 908-22 V6.1.1 (2016-07)7 1 Scope The present document applies to the following radio equipment type: • Mobile WiMAXTM FDD Base Stations for IMTOFDMA TDD WMAN This radio equipment type is capable of operating in all or any part of the frequency bands given in table 1-1. Table 1-1: Base Station WiMAXTM FDD Operating frequency bands Mobile WiMAXTM Band Class Index Direction of transmission Mobile WiMAXTM FDD frequency bands 7G Transmit
925 MHz to 960 MHz Receive 880 MHz to 915 MHz 6C Transmit 1 805 MHz to 1 880 MHz Receive 1 710 MHz to 1 785 MHz
The present document contains requirements to demonstrate that Radio equipment both effectively uses and supports the efficient use of radio spectrum in order to avoid harmful interference. In addition to the present document, other ENs that specify technical requirements in respect of essential requirements under other parts of article 3 of the Radio Equipment Directive 2014/53/EU [i.2] may apply to equipment within the scope of the present document. NOTE: A list of such ENs is included on the web site http://www.newapproach.org. 2 References 2.1 Normative references References are either specific (identified by date of publication and/or edition number or version number) or non-specific. For specific references, only the cited version applies. For non-specific references, the latest version of the referenced document (including any amendments) applies. Referenced documents which are not found to be publicly available in the expected location might be found at http://docbox.etsi.org/Reference. NOTE: While any hyperlinks included in this clause were valid at the time of publication ETSI cannot guarantee their long term validity. The following referenced documents are necessary for the application of the present document. [1] WMF-T25-002-R010v06 (2012): "WiMAX Forum® Test Procedures - Mobile Radio Conformance Tests" - Release 1 v06. [2] CEPT/ERC/Recommendation 74-01E (Siófok 98, Nice 99, Sesimbra 02, Hradec Kralove 05, Cardiff 11) (01-2011): "Unwanted emissions in the spurious domain". 2.2 Informative references References are either specific (identified by date of publication and/or edition number or version number) or non-specific. For specific references, only the cited version applies. For non-specific references, the latest version of the referenced document (including any amendments) applies. NOTE: While any hyperlinks included in this clause were valid at the time of publication ETSI cannot guarantee their long term validity. The following referenced documents are not necessary for the application of the present document but they assist the user with regard to a particular subject area. SIST EN 301 908-22 V6.1.1:2016



ETSI ETSI EN 301 908-22 V6.1.1 (2016-07)8 [i.1] Recommendation ITU-R SM.329-12 (2012): "Unwanted emissions in the spurious domain". [i.2] Directive 2014/53/EU of the European Parliament and of the Council of 16 April 2014 on the harmonisation of the laws of the Member States relating to the making available on the market of radio equipment and repealing Directive 1999/5/EC Text with EEA relevance. [i.3] ETSI EG 203 336: "Electromagnetic compatibility and Radio spectrum Matters (ERM); Guide for the selection of technical parameters for the production of Harmonised Standards covering article 3.1(b) and article 3.2 of Directive 2014/53/EU". [i.4] ETSI TR 102 215 (V1.3.1): "Electromagnetic compatibility and Radio spectrum Matters (ERM); Recommended approach, and possible limits for measurement uncertainty for the measurement of radiated electromagnetic fields above 1 GHz". [i.5] ETSI EN 300 019-1-0: "Environmental Engineering (EE); Environmental conditions and environmental tests for telecommunications equipment; Part 1-0: Classification of environmental conditions; Introduction". [i.6] ETSI TR 100 028 (V1.4.1) (all parts): "Electromagnetic compatibility and Radio spectrum Matters (ERM); Uncertainties in the measurement of mobile radio equipment characteristics". [i.7] Commission Implementing Decision C(2015) 5376 final of 4.8.2015 on a standardisation request to the European Committee for Electrotechnical Standardisation and to the European Telecommunications Standards Institute as regards radio equipment in support of Directive 2014/53/EU of the European Parliament and of the Council. [i.8] ETSI EN 301 908-1 (V11.1.1): "IMT cellular networks; Harmonised Standard covering the essential requirements of article 3.2 of the Directive 2014/53/EU; Part 1: Introduction and common
...

ETSI EN 301 908-22 V6.1.1 (2016-07)






HARMONISED EUROPEAN STANDARD
IMT cellular networks;
Harmonised Standard covering the essential requirements
of article 3.2 of the Directive 2014/53/EU;
TM
Part 22: OFDMA TDD WMAN (Mobile WiMAX )
FDD Base Stations (BS)

---------------------- Page: 1 ----------------------
2 ETSI EN 301 908-22 V6.1.1 (2016-07)



Reference
REN/MSG-TFES-11-22-RED
Keywords
3G, cell, digital, FDD, IMT, IMT-2000, mobile,
radio, regulation, WiMAX
ETSI
650 Route des Lucioles
F-06921 Sophia Antipolis Cedex - FRANCE

Tel.: [phone]  Fax: [phone]

Siret N° 348 623 562 00017 - NAF 742 C
Association à but non lucratif enregistrée à la
Sous-Préfecture de Grasse (06) N° 7803/88

Important notice
The present document can be downloaded from:
http://www.etsi.org/standards-search
The present document may be made available in electronic versions and/or in print. The content of any electronic and/or
print versions of the present document shall not be modified without the prior written authorization of ETSI. In case of any
existing or perceived difference in contents between such versions and/or in print, the only prevailing document is the
print of the Portable Document Format (PDF) version kept on a specific network drive within ETSI Secretariat.
Users of the present document should be aware that the document may be subject to revision or change of status.
Information on the current status of this and other ETSI documents is available at
https://portal.etsi.org/TB/ETSIDeliverableStatus.aspx
If you find errors in the present document, please send your comment to one of the following services:
https://portal.etsi.org/People/CommiteeSupportStaff.aspx
Copyright Notification
No part may be reproduced or utilized in any form or by any means, electronic or mechanical, including photocopying
and microfilm except as authorized by written permission of ETSI.
The content of the PDF version shall not be modified without the written authorization of ETSI.
The copyright and the foregoing restriction extend to reproduction in all media.

© European Telecommunications Standards Institute 2016.
All rights reserved.

TM TM TM
DECT , PLUGTESTS , UMTS and the ETSI logo are Trade Marks of ETSI registered for the benefit of its Members.
TM
3GPP and LTE™ are Trade Marks of ETSI registered for the benefit of its Members and
of the 3GPP Organizational Partners.
GSM® and the GSM logo are Trade Marks registered and owned by the GSM Association.
ETSI

---------------------- Page: 2 ----------------------
3 ETSI EN 301 908-22 V6.1.1 (2016-07)
Contents
Intellectual Property Rights . 6
Foreword . 6
Modal verbs terminology . 6
Introduction . 6
1 Scope . 7
2 References . 7
2.1 Normative references . 7
2.2 Informative references . 7
3 Definitions, symbols and abbreviations . 8
3.1 Definitions . 8
3.2 Symbols . 9
3.3 Abbreviations . 10
4 Technical requirements specification . 10
4.1 Environmental profile . 10
4.2 Conformance requirements . 10
4.2.1 Introduction. 10
4.2.2 Spectrum emission mask . 11
4.2.2.1 Definition . 11
4.2.2.2 Limits . 11
4.2.2.2.1 Requirements for 5 MHz channel bandwidth . 11
4.2.2.2.2 Requirements for 10 MHz channel bandwidth . 11
4.2.2.3 Conformance . 12
4.2.3 Transmitter Adjacent Channel Leakage power Ratio (ACLR) . 12
4.2.3.1 Definition . 12
4.2.3.2 Limits . 12
4.2.3.2.1 ACLR requirements for 5 MHz channel bandwidth . 12
4.2.3.2.2 ACLR requirements for 10 MHz channel bandwidth . 12
4.2.3.3 Conformance . 12
4.2.4 Transmitter spurious emis sions . 13
4.2.4.1 Definition . 13
4.2.4.2 Limits . 13
4.2.4.2.0 General requirements . 13
4.2.4.2.1 Requirements for 5 MHz channel bandwidth . 13
4.2.4.2.2 Requirements for 10 MHz channel bandwidth . 13
4.2.4.2.3 Additional Spurious Emission Requirements . 14
4.2.4.2.4 Protection of the BS receiver of own or different BS . 14
4.2.4.3 Conformance . 14
4.2.5 Base station maximum output power . 14
4.2.5.1 Definition . 14
4.2.5.2 Limits . 14
4.2.5.3 Conformance . 15
4.2.6 Transmitter Intermodulation . 15
4.2.6.1 Definition . 15
4.2.6.2 Limits . 15
4.2.6.3 Conformance . 15
4.2.7 Receiver spurious emissions . 15
4.2.7.1 Definition . 15
4.2.7.2 Limits . 15
4.2.7.3 Conformance . 16
4.2.8 Receiver Adjacent Channel Selectivity (ACS) . 16
4.2.8.1 Definition . 16
4.2.8.2 Limits . 16
4.2.8.3 Conformance . 16
4.2.9 Receiver blocking characteristics . 17
ETSI

---------------------- Page: 3 ----------------------
4 ETSI EN 301 908-22 V6.1.1 (2016-07)
4.2.9.1 Definition . 17
4.2.9.2 Limits . 17
4.2.9.3 Conformance . 18
4.2.10 Receiver intermodulation characteristics . 18
4.2.10.1 Definition and applicability . 18
4.2.10.2 Limits . 18
4.2.10.3 Conformance . 19
4.2.11 Receiver reference sensitivity level . 19
4.2.11.1 Definition . 19
4.2.11.2 Limits . 19
5 Testing for compliance with technical requirements . 19
5.1 Environmental conditions for testing . 19
5.2 Product information . 20
5.3 Interpretation of the measurement results . 20
5.4 Essential radio test suites . 21
5.4.1 Transmitter Spectrum Emission Mask . 21
5.4.1.1 Method of measurement . 21
5.4.1.1.1 Initial conditions . 22
5.4.1.1.2 Procedure . 22
5.4.1.2 Test requirements . 22
5.4.2 Transmitter Adjacent Channel Leakage Power Ratio . 23
5.4.2.1 Method of measurement . 23
5.4.2.1.1 Initial conditions . 23
5.4.2.1.2 Procedure . 23
5.4.2.2 Test requirements . 24
5.4.3 Transmitter spurious emis sions . 24
5.4.3.1 Method of measurement . 24
5.4.3.1.1 Initial conditions . 25
5.4.3.1.2 Procedure . 25
5.4.3.2 Test requirements . 25
5.4.4 Base Station maximum output power . 25
5.4.4.1 Method of measurement . 26
5.4.4.1.1 Initial conditions . 26
5.4.4.1.2 Procedure . 26
5.4.4.2 Test requirements . 26
5.4.5 Transmitter Intermodulation . 27
5.4.5.1 Method of measurement . 27
5.4.5.1.1 Initial conditions . 27
5.4.5.1.2 Procedure . 27
5.4.5.2 Test requirements . 27
5.4.6 Receiver spurious emissions . 28
5.4.6.1 Method of measurement . 28
5.4.6.1.1 Initial conditions . 28
5.4.6.1.2 Procedure . 28
5.4.6.2 Test requirements . 29
5.4.7 Receiver Adjacent Channel Selectivity (ACS) . 29
5.4.7.1 Method of measurement . 29
5.4.7.1.1 Initial conditions . 29
5.4.7.1.2 Procedure . 29
5.4.7.2 Test requirements . 30
5.4.8 Receiver blocking characteristics . 30
5.4.8.1 Method of measurement . 30
5.4.8.1.1 Initial conditions . 31
5.4.8.1.2 Procedure . 31
5.4.8.2 Test requirements . 31
5.4.9 Receiver intermodulation characteristics . 31
5.4.9.1 Method of measurement . 32
5.4.9.1.1 Initial conditions . 32
5.4.9.1.2 Procedure . 32
5.4.9.2 Test requirements . 33
5.4.10 Receiver reference sensitivity level . 33
ETSI

---------------------- Page: 4 ----------------------
5 ETSI EN 301 908-22 V6.1.1 (2016-07)
5.4.10.1 Method of test . 33
5.4.10.2 Test requirement . 33
Annex A (normative): Relationship between the present document and the essential
requirements of Directive 2014/53/EU . 34
Annex B (normative): Environmental profile specification . 35
Annex C (informative): Void . 36
Annex D (informative): Bibliography . 37
History . 38

ETSI

---------------------- Page: 5 ----------------------
6 ETSI EN 301 908-22 V6.1.1 (2016-07)
Intellectual Property Rights
IPRs essential or potentially essential to the present document may have been declared to ETSI. The information
pertaining to these essential IPRs, if any, is publicly available for ETSI members and non-members, and can be found
in ETSI SR 000 314: "Intellectual Property Rights (IPRs); Essential, or potentially Essential, IPRs notified to ETSI in
respect of ETSI standards", which is available from the ETSI Secretariat. Latest updates are available on the ETSI Web
server (https://ipr.etsi.org/).
Pursuant to the ETSI IPR Policy, no investigation, including IPR searches, has been carried out by ETSI. No guarantee
can be given as to the existence of other IPRs not referenced in ETSI SR 000 314 (or the updates on the ETSI Web
server) which are, or may be, or may become, essential to the present document.
Foreword
This Harmonised European Standard (EN) has been produced by ETSI Technical Committee Mobile Standards Group
(MSG).
The present document has been prepared under the Commission's standardisation request C(2015) 5376 final [i.7] to
provide one voluntary means of conforming to the essential requirements of Directive 2014/53/EU on the harmonisation
of the laws of the Member States relating to the making available on the market of radio equipment and repealing
Directive 1999/5/EC [i.2].
Once the present document is cited in the Official Journal of the European Union under that Directive, compliance with
the normative clauses of the present document given in table A-1 confers, within the limits of the scope of the present
document, a presumption of conformity with the corresponding essential requirements of that Directive, and associated
EFTA regulations.
The present document is part 22 of a multi-part deliverable. Full details of the entire series can be found in part 1 [i.8].

National transposition dates
Date of adoption of this EN: 12 July 2016
Date of latest announcement of this EN (doa): 31 October 2016
Date of latest publication of new National Standard
or endorsement of this EN (dop/e): 30 April 2017
Date of withdrawal of any conflicting National Standard (dow): 30 April 2018

Modal verbs terminology
In the present document "shall", "shall not", "should", "should not", "may", "need not", "will", "will not", "can" and
"cannot" are to be interpreted as described in clause 3.2 of the ETSI Drafting Rules (Verbal forms for the expression of
provisions).
"must" and "must not" are NOT allowed in ETSI deliverables except when used in direct citation.
Introduction
The present document is part of a set of standards developed by ETSI that are designed to fit in a modular structure to
cover radio equipment within the scope of the Radio Equipment Directive [i.2]. The present document is produced
following the guidance in ETSI EG 203 336 [i.3] as applicable.
ETSI

---------------------- Page: 6 ----------------------
7 ETSI EN 301 908-22 V6.1.1 (2016-07)
1 Scope
The present document applies to the following radio equipment type:
TM
• Mobile WiMAX FDD Base Stations for IMTOFDMA TDD WMAN This radio equipment type is capable
of operating in all or any part of the frequency bands given in table 1-1.
TM
Table 1-1: Base Station WiMAX FDD Operating frequency bands
TM TM
Mobile WiMAX Direction of transmission Mobile WiMAX FDD
Band Class Index frequency bands
Transmit 925 MHz to 960 MHz
7G
Receive 880 MHz to 915 MHz
Transmit 1 805 MHz to 1 880 MHz
6C
Receive 1 710 MHz to 1 785 MHz

The present document contains requirements to demonstrate that Radio equipment both effectively uses and supports
the efficient use of radio spectrum in order to avoid harmful interference.
In addition to the present document, other ENs that specify technical requirements in respect of essential requirements
under other parts of article 3 of the Radio Equipment Directive 2014/53/EU [i.2] may apply to equipment within the
scope of the present document.
NOTE: A list of such ENs is included on the web site http://www.newapproach.org.
2 References
2.1 Normative references
References are either specific (identified by date of publication and/or edition number or version number) or
non-specific. For specific references, only the cited version applies. For non-specific references, the latest version of the
referenced document (including any amendments) applies.
Referenced documents which are not found to be publicly available in the expected location might be found at
http://docbox.etsi.org/Reference.
NOTE: While any hyperlinks included in this clause were valid at the time of publication ETSI cannot guarantee
their long term validity.
The following referenced documents are necessary for the application of the present document.
[1] WMF-T25-002-R010v06 (2012): "WiMAX Forum® Test Procedures - Mobile Radio
Conformance Tests" - Release 1 v06.
[2] CEPT/ERC/Recommendation 74-01E (Siófok 98, Nice 99, Sesimbra 02, Hradec Kralove 05,
Cardiff 11) (01-2011): "Unwanted emissions in the spurious domain".
2.2 Informative references
References are either specific (identified by date of publication and/or edition number or version number) or
non-specific. For specific references, only the cited version applies. For non-specific references, the latest version of the
referenced document (including any amendments) applies.
NOTE: While any hyperlinks included in this clause were valid at the time of publication ETSI cannot guarantee
their long term validity.
The following referenced documents are not necessary for the application of the present document but they assist the
user with regard to a particular subject area.
ETSI

---------------------- Page: 7 ----------------------
8 ETSI EN 301 908-22 V6.1.1 (2016-07)
[i.1] Recommendation ITU-R SM.329-12 (2012): "Unwanted emissions in the spurious domain".
[i.2] Directive 2014/53/EU of the European Parliament and of the Council of 16 April 2014 on the
harmonisation of the laws of the Member States relating to the making available on the market of
radio equipment and repealing Directive 1999/5/EC Text with EEA relevance.
[i.3] ETSI EG 203 336: "Electromagnetic compatibility and Radio spectrum Matters (ERM); Guide for
the selection of technical parameters for the production of Harmonised Standards covering
article 3.1(b) and article 3.2 of Directive 2014/53/EU".
[i.4] ETSI TR 102 215 (V1.3.1): "Electromagnetic compatibility and Radio spectrum Matters (ERM);
Recommended approach, and possible limits for measurement uncertainty for the measurement of
radiated electromagnetic fields above 1 GHz".
[i.5] ETSI EN 300 019-1-0: "Environmental Engineering (EE); Environmental conditions and
environmental tests for telecommunications equipment; Part 1-0: Classification of environmental
conditions; Introduction".
[i.6] ETSI TR 100 028 (V1.4.1) (all parts): "Electromagnetic compatibility and Radio spectrum Matters
(ERM); Uncertainties in the measurement of mobile radio equipment characteristics".
[i.7] Commission Implementing Decision C(2015) 5376 final of 4.8.2015 on a standardisation request
to the European Committee for Electrotechnical Standardisation and to the European
Telecommunications Standards Institute as regards radio equipment in support of Directive
2014/53/EU of the European Parliament and of the Council.
[i.8] ETSI EN 301 908-1 (V11.1.1): "IMT cellular networks; Harmonised Standard covering the
essential requirements of article 3.2 of the Directive 2014/53/EU; Part 1: Introduction and
common requirements".
3 Definitions, symbols and abbreviations
3.1 Definitions
For the purposes of the present document, the terms and definitions given in the R
...

Final draft ETSI EN 301 908-22 V6.1.0 (2016-05)






HARMONISED EUROPEAN STANDARD
IMT cellular networks;
Harmonised Standard covering the essential requirements
of article 3.2 of the Directive 2014/53/EU;
TM
Part 22: OFDMA TDD WMAN (Mobile WiMAX )
FDD Base Stations (BS)

---------------------- Page: 1 ----------------------
2 Final draft ETSI EN 301 908-22 V6.1.0 (2016-05)



Reference
REN/MSG-TFES-11-22-RED
Keywords
3G, cell, digital, FDD, IMT, IMT-2000, mobile,
radio, regulation, WiMAX
ETSI
650 Route des Lucioles
F-06921 Sophia Antipolis Cedex - FRANCE

Tel.: [phone]  Fax: [phone]

Siret N° 348 623 562 00017 - NAF 742 C
Association à but non lucratif enregistrée à la
Sous-Préfecture de Grasse (06) N° 7803/88

Important notice
The present document can be downloaded from:
http://www.etsi.org/standards-search
The present document may be made available in electronic versions and/or in print. The content of any electronic and/or
print versions of the present document shall not be modified without the prior written authorization of ETSI. In case of any
existing or perceived difference in contents between such versions and/or in print, the only prevailing document is the
print of the Portable Document Format (PDF) version kept on a specific network drive within ETSI Secretariat.
Users of the present document should be aware that the document may be subject to revision or change of status.
Information on the current status of this and other ETSI documents is available at
https://portal.etsi.org/TB/ETSIDeliverableStatus.aspx
If you find errors in the present document, please send your comment to one of the following services:
https://portal.etsi.org/People/CommiteeSupportStaff.aspx
Copyright Notification
No part may be reproduced or utilized in any form or by any means, electronic or mechanical, including photocopying
and microfilm except as authorized by written permission of ETSI.
The content of the PDF version shall not be modified without the written authorization of ETSI.
The copyright and the foregoing restriction extend to reproduction in all media.

© European Telecommunications Standards Institute 2016.
All rights reserved.

TM TM TM
DECT , PLUGTESTS , UMTS and the ETSI logo are Trade Marks of ETSI registered for the benefit of its Members.
TM
3GPP and LTE™ are Trade Marks of ETSI registered for the benefit of its Members and
of the 3GPP Organizational Partners.
GSM® and the GSM logo are Trade Marks registered and owned by the GSM Association.
ETSI

---------------------- Page: 2 ----------------------
3 Final draft ETSI EN 301 908-22 V6.1.0 (2016-05)
Contents
Intellectual Property Rights . 6
Foreword . 6
Modal verbs terminology . 6
Introduction . 6
1 Scope . 7
2 References . 7
2.1 Normative references . 7
2.2 Informative references . 7
3 Definitions, symbols and abbreviations . 8
3.1 Definitions . 8
3.2 Symbols . 9
3.3 Abbreviations . 9
4 Technical requirements specification . 10
4.1 Environmental profile . 10
4.2 Conformance requirements . 10
4.2.1 Introduction. 10
4.2.2 Spectrum emission mask . 11
4.2.2.1 Definition . 11
4.2.2.2 Limits . 11
4.2.2.2.1 Requirements for 5 MHz channel bandwidth . 11
4.2.2.2.2 Requirements for 10 MHz channel bandwidth . 11
4.2.2.3 Conformance . 11
4.2.3 Transmitter Adjacent Channel Leakage power Ratio (ACLR) . 11
4.2.3.1 Definition . 11
4.2.3.2 Limits . 12
4.2.3.2.1 ACLR requirements for 5 MHz channel bandwidth . 12
4.2.3.2.2 ACLR requirements for 10 MHz channel bandwidth . 12
4.2.3.3 Conformance . 12
4.2.4 Transmitter spurious emis sions . 12
4.2.4.1 Definition . 12
4.2.4.2 Limits . 12
4.2.4.2.0 General requirements . 12
4.2.4.2.1 Requirements for 5 MHz channel bandwidth . 13
4.2.4.2.2 Requirements for 10 MHz channel bandwidth . 13
4.2.4.2.3 Additional Spurious Emission Requirements . 13
4.2.4.2.4 Protection of the BS receiver of own or different BS . 13
4.2.4.3 Conformance . 14
4.2.5 Base station maximum output power . 14
4.2.5.1 Definition . 14
4.2.5.2 Limits . 14
4.2.5.3 Conformance . 14
4.2.6 Transmitter Intermodulation . 14
4.2.6.1 Definition . 14
4.2.6.2 Limits . 14
4.2.6.3 Conformance . 14
4.2.7 Receiver spurious emissions . 15
4.2.7.1 Definition . 15
4.2.7.2 Limits . 15
4.2.7.3 Conformance . 15
4.2.8 Receiver Adjacent Channel Selectivity (ACS) . 15
4.2.8.1 Definition . 15
4.2.8.2 Limits . 15
4.2.8.3 Conformance . 16
4.2.9 Receiver blocking characteristics . 16
ETSI

---------------------- Page: 3 ----------------------
4 Final draft ETSI EN 301 908-22 V6.1.0 (2016-05)
4.2.9.1 Definition . 16
4.2.9.2 Limits . 16
4.2.9.3 Conformance . 17
4.2.10 Receiver intermodulation characteristics . 17
4.2.10.1 Definition and applicability . 17
4.2.10.2 Limits . 17
4.2.10.3 Conformance . 18
4.2.11 Receiver reference sensitivity level . 18
4.2.11.1 Definition . 18
4.2.11.2 Limits . 18
5 Testing for compliance with technical requirements . 19
5.1 Environmental conditions for testing . 19
5.2 Product information . 19
5.3 Interpretation of the measurement results . 19
5.4 Essential radio test suites . 20
5.4.1 Transmitter Spectrum Emission Mask . 20
5.4.1.1 Method of measurement . 20
5.4.1.1.1 Initial conditions . 21
5.4.1.1.2 Procedure . 21
5.4.1.2 Test requirements . 21
5.4.2 Transmitter Adjacent Channel Leakage Power Ratio . 22
5.4.2.1 Method of measurement . 22
5.4.2.1.1 Initial conditions . 22
5.4.2.1.2 Procedure . 22
5.4.2.2 Test requirements . 23
5.4.3 Transmitter spurious emis sions . 23
5.4.3.1 Method of measurement . 23
5.4.3.1.1 Initial conditions . 24
5.4.3.1.2 Procedure . 24
5.4.3.2 Test requirements . 24
5.4.4 Base Station maximum output power . 24
5.4.4.1 Method of measurement . 24
5.4.4.1.1 Initial conditions . 25
5.4.4.1.2 Procedure . 25
5.4.4.2 Test requirements . 25
5.4.5 Transmitter Intermodulation . 25
5.4.5.1 Method of measurement . 25
5.4.5.1.1 Initial conditions . 26
5.4.5.1.2 Procedure . 26
5.4.5.2 Test requirements . 26
5.4.6 Receiver spurious emissions . 26
5.4.6.1 Method of measurement . 26
5.4.6.1.1 Initial conditions . 27
5.4.6.1.2 Procedure . 27
5.4.6.2 Test requirements . 27
5.4.7 Receiver Adjacent Channel Selectivity (ACS) . 27
5.4.7.1 Method of measurement . 27
5.4.7.1.1 Initial conditions . 28
5.4.7.1.2 Procedure . 28
5.4.7.2 Test requirements . 29
5.4.8 Receiver blocking characteristics . 29
5.4.8.1 Method of measurement . 29
5.4.8.1.1 Initial conditions . 29
5.4.8.1.2 Procedure . 29
5.4.8.2 Test requirements . 30
5.4.9 Receiver intermodulation characteristics . 30
5.4.9.1 Method of measurement . 30
5.4.9.1.1 Initial conditions . 31
5.4.9.1.2 Procedure . 31
5.4.9.2 Test requirements . 31
5.4.10 Receiver reference sensitivity level . 31
ETSI

---------------------- Page: 4 ----------------------
5 Final draft ETSI EN 301 908-22 V6.1.0 (2016-05)
5.4.10.1 Method of test . 31
5.4.10.2 Test requirement . 32
Annex A (normative): Relationship between the present document and the essential
requirements of Directive 2014/53/EU . 33
Annex B (normative): Environmental profile specification . 34
Annex C (informative): Void . 35
Annex D (informative): Bibliography . 36
History . 37

ETSI

---------------------- Page: 5 ----------------------
6 Final draft ETSI EN 301 908-22 V6.1.0 (2016-05)
Intellectual Property Rights
IPRs essential or potentially essential to the present document may have been declared to ETSI. The information
pertaining to these essential IPRs, if any, is publicly available for ETSI members and non-members, and can be found
in ETSI SR 000 314: "Intellectual Property Rights (IPRs); Essential, or potentially Essential, IPRs notified to ETSI in
respect of ETSI standards", which is available from the ETSI Secretariat. Latest updates are available on the ETSI Web
server (https://ipr.etsi.org/).
Pursuant to the ETSI IPR Policy, no investigation, including IPR searches, has been carried out by ETSI. No guarantee
can be given as to the existence of other IPRs not referenced in ETSI SR 000 314 (or the updates on the ETSI Web
server) which are, or may be, or may become, essential to the present document.
Foreword
This final draft Harmonised European Standard (EN) has been produced by ETSI Technical Committee Mobile
Standards Group (MSG), and is now submitted for the Vote phase of the ETSI standards EN Approval Procedure.
The present document has been prepared under the Commission's standardisation request C(2015) 5376 final [i.7] to
provide one voluntary means of conforming to the essential requirements of Directive 2014/53/EU on the harmonisation
of the laws of the Member States relating to the making available on the market of radio equipment and repealing
Directive 1999/5/EC [i.2].
Once the present document is cited in the Official Journal of the European Union under that Directive, compliance with
the normative clauses of the present document given in table A-1 confers, within the limits of the scope of the present
document, a presumption of conformity with the corresponding essential requirements of that Directive, and associated
EFTA regulations.
The present document is part 22 of a multi-part deliverable. Full details of the entire series can be found in part 1 [i.8].

Proposed national transposition dates
Date of latest announcement of this EN (doa): 3 months after ETSI publication
Date of latest publication of new National Standard
or endorsement of this EN (dop/e): 6 months after doa
Date of withdrawal of any conflicting National Standard (dow): 18 months after doa

Modal verbs terminology
In the present document "shall", "shall not", "should", "should not", "may", "need not", "will", "will not", "can" and
"cannot" are to be interpreted as described in clause 3.2 of the ETSI Drafting Rules (Verbal forms for the expression of
provisions).
"must" and "must not" are NOT allowed in ETSI deliverables except when used in direct citation.
Introduction
The present document is part of a set of standards developed by ETSI that are designed to fit in a modular structure to
cover radio equipment within the scope of the Radio Equipment Directive [i.2]. The present document is produced
following the guidance in ETSI EG 203 336 [i.3] as applicable.
ETSI

---------------------- Page: 6 ----------------------
7 Final draft ETSI EN 301 908-22 V6.1.0 (2016-05)
1 Scope
The present document applies to the following radio equipment type:
TM
• Mobile WiMAX FDD Base Stations for IMTOFDMA TDD WMAN This radio equipment type is capable
of operating in all or any part of the frequency bands given in table 1-1.
TM
Table 1-1: Base Station WiMAX FDD Operating frequency bands
TM TM
Mobile WiMAX Direction of transmission Mobile WiMAX FDD
Band Class Index frequency bands
Transmit 925 MHz to 960 MHz
7G
Receive 880 MHz to 915 MHz
Transmit 1 805 MHz to 1 880 MHz
6C
Receive 1 710 MHz to 1 785 MHz

The present document contains requirements to demonstrate that Radio equipment both effectively uses and supports
the efficient use of radio spectrum in order to avoid harmful interference.
In addition to the present document, other ENs that specify technical requirements in respect of essential requirements
under other parts of article 3 of the Radio Equipment Directive 2014/53/EU [i.2] may apply to equipment within the
scope of the present document.
NOTE: A list of such ENs is included on the web site http://www.newapproach.org.
2 References
2.1 Normative references
References are either specific (identified by date of publication and/or edition number or version number) or
non-specific. For specific references, only the cited version applies. For non-specific references, the latest version of the
referenced document (including any amendments) applies.
Referenced documents which are not found to be publicly available in the expected location might be found at
http://docbox.etsi.org/Reference.
NOTE: While any hyperlinks included in this clause were valid at the time of publication ETSI cannot guarantee
their long term validity.
The following referenced documents are necessary for the application of the present document.
[1] WMF-T25-002-R010v06 (2012): "WiMAX Forum® Test Procedures - Mobile Radio
Conformance Tests" - Release 1 v06.
[2] CEPT/ERC/Recommendation 74-01E (Siófok 98, Nice 99, Sesimbra 02, Hradec Kralove 05,
Cardiff 11) (01-2011): "Unwanted emissions in the spurious domain".
2.2 Informative references
References are either specific (identified by date of publication and/or edition number or version number) or
non-specific. For specific references, only the cited version applies. For non-specific references, the latest version of the
referenced document (including any amendments) applies.
NOTE: While any hyperlinks included in this clause were valid at the time of publication ETSI cannot guarantee
their long term validity.
The following referenced documents are not necessary for the application of the present document but they assist the
user with regard to a particular subject area.
[i.1] Recommendation ITU-R SM.329-12 (2012): "Unwanted emissions in the spurious domain".
ETSI

---------------------- Page: 7 ----------------------
8 Final draft ETSI EN 301 908-22 V6.1.0 (2016-05)
[i.2] Directive 2014/53/EU of the European Parliament and of the Council of 16 April 2014 on the
harmonisation of the laws of the Member States relating to the making available on the market of
radio equipment and repealing Directive 1999/5/EC Text with EEA relevance.
[i.3] ETSI EG 203 336: "Electromagnetic compatibility and Radio spectrum Matters (ERM); Guide for
the selection of technical parameters for the production of Harmonised Standards covering
article 3.1(b) and article 3.2 of Directive 2014/53/EU".
[i.4] ETSI TR 102 215 (V1.3.1): "Electromagnetic compatibility and Radio spectrum Matters (ERM);
Recommended approach, and possible limits for measurement uncertainty for the measurement of
radiated electromagnetic fields above 1 GHz".
[i.5] ETSI EN 300 019-1-0: "Environmental Engineering (EE); Environmental conditions and
environmental tests for telecommunications equipment; Part 1-0: Classification of environmental
conditions; Introduction".
[i.6] ETSI TR 100 028 (V1.4.1) (all parts): "Electromagnetic compatibility and Radio spectrum Matters
(ERM); Uncertainties in the measurement of mobile radio equipment characteristics".
[i.7] Commission Implementing Decision C(2015) 5376 final of 4.8.2015 on a standardisation request
to the European Committee for Electrotechnical Standardisation and to the European
Telecommunications Standards Institute as regards radio equipment in support of Directive
2014/53/EU of the European Parliament and of the Council.
[i.8] ETSI EN 301 908-1 (V11.1.1): "IMT cellular networks; Harmonised Standard covering the
essential requirements of article 3.2 of the Directive 2014/53/
...