ETSI TS 102 939-1 V1.2.1 (2015-03)

Digital Enhanced Cordless Telecommunications (DECT); Ultra Low Energy (ULE); Machine to Machine Communications; Part 1: Home Automation Network (phase 1)

RTS/DECT-ULE270-1

General Information

• Status: Published
• Publication Date: 25-Mar-2015
• Technical Committee: DECT ULE - DECT-Ultra-Low-Energy
• Current Stage: 12 - Completion
• Due Date: 24-Mar-2015
• Completion Date: 26-Mar-2015

Standards Content (Sample)

ETSI TS 102 939-1 V1.2.1 (2015-03)






TECHNICAL SPECIFICATION
Digital Enhanced Cordless Telecommunications (DECT);
Ultra Low Energy (ULE);
Machine to Machine Communications;
Part 1: Home Automation Network (phase 1)

---------------------- Page: 1 ----------------------
2 ETSI TS 102 939-1 V1.2.1 (2015-03)



Reference
RTS/DECT-ULE270-1
Keywords
access, data, DECT, environment, IMT-2000,
intelligent homes & buildings, internet,
interoperability, interworking, M2M, mobility,
packet mode, profile, radio, synchronization,
TDD, TDMA
ETSI
650 Route des Lucioles
F-06921 Sophia Antipolis Cedex - FRANCE

Tel.: [phone]  Fax: [phone]

Siret N° 348 623 562 00017 - NAF 742 C
Association à but non lucratif enregistrée à la
Sous-Préfecture de Grasse (06) N° 7803/88

Important notice
The present document can be downloaded from:
http://www.etsi.org/standards-search
The present document may be made available in electronic versions and/or in print. The content of any electronic and/or
print versions of the present document shall not be modified without the prior written authorization of ETSI. In case of any
existing or perceived difference in contents between such versions and/or in print, the only prevailing document is the
print of the Portable Document Format (PDF) version kept on a specific network drive within ETSI Secretariat.
Users of the present document should be aware that the document may be subject to revision or change of status.
Information on the current status of this and other ETSI documents is available at
http://portal.etsi.org/tb/status/status.asp
If you find errors in the present document, please send your comment to one of the following services:
https://portal.etsi.org/People/CommiteeSupportStaff.aspx
Copyright Notification
No part may be reproduced or utilized in any form or by any means, electronic or mechanical, including photocopying
and microfilm except as authorized by written permission of ETSI.
The content of the PDF version shall not be modified without the written authorization of ETSI.
The copyright and the foregoing restriction extend to reproduction in all media.

© European Telecommunications Standards Institute 2015.
All rights reserved.

TM TM TM
DECT , PLUGTESTS , UMTS and the ETSI logo are Trade Marks of ETSI registered for the benefit of its Members.
TM
3GPP and LTE™ are Trade Marks of ETSI registered for the benefit of its Members and
of the 3GPP Organizational Partners.
GSM® and the GSM logo are Trade Marks registered and owned by the GSM Association.
ETSI

---------------------- Page: 2 ----------------------
3 ETSI TS 102 939-1 V1.2.1 (2015-03)
Contents
Intellectual Property Rights . 13
Foreword . 13
Modal verbs terminology . 13
Introduction . 13
1 Scope . 15
2 References . 15
2.1 Normative references . 15
2.2 Informative references . 16
3 Definitions, symbols and abbreviations . 17
3.1 Definitions . 17
3.2 Symbols . 20
3.3 Abbreviations . 21
4 Description of services . 23
4.1 DECT Ultra Low Energy . 23
4.1.1 Introduction. 23
4.2 ULE phase 1 . 23
4.2.1 Definition of ULE phase 1 . 23
4.2.2 Example of applications covered by ULE phase 1 . 24
4.2.3 Physical layer, radio properties and spectrum use . 24
4.2.4 Coexistence with other DECT services . 24
4.3 Example scenarios for DECT ULE phase 1 . 24
4.3.1 Security applications (fire and burglary alarms) . 24
4.3.2 Global Home control and domotic scenario. 25
4.3.3 Energy and appliances management scenario . 25
4.4 Requirement specification for ULE phase 1 . 26
4.4.1 ULE phase 1 device types . 26
4.4.1.0 General . 26
4.4.1.1 PP type I: "sensor" . 26
4.4.1.1.1 General description . 26
4.4.1.1.2 Requirements and functionalities for type I devices . 26
4.4.1.2 PP type II: "fast actuator" . 27
4.4.1.2.1 General description . 27
4.4.1.2.2 Requirements and functionalities for type II devices . 27
4.4.1.3 PP type III: "slow actuator" . 27
4.4.1.3.1 General description . 27
4.4.1.3.2 Requirements and functionalities for type III devices . 27
4.4.1.4 ULE phase 1 compliant RFP . 27
4.4.1.4.1 General description . 27
4.4.1.4.2 Requirements and functionalities for ULE phase 1 RFP . 27
4.4.2 U-plane interworking and protocol architecture . 28
4.4.2.1 ULE phase 1 protocol architecture . 28
4.4.3 Performance Objectives . 28
4.5 Technical features implemented by ULE phase 1 . 29
4.5.0 General . 29
4.5.1 MAC/PHY layer . 29
4.5.2 DLC layer . 30
4.5.3 NWK layer . 30
4.5.4 Interworking and Application layer . 30
4.5.5 Security . 31
4.5.6 Management entity . 31
5 Service and feature definitions . 31
5.1 ULE Phase 1 . 31
5.1.1 PHL service definitions . 31
5.1.2 MAC service definitions . 31
ETSI

---------------------- Page: 3 ----------------------
4 ETSI TS 102 939-1 V1.2.1 (2015-03)
5.1.3 DLC service definitions . 33
5.1.4 NWK feature definitions . 34
5.1.5 Application feature definitions . 35
5.1.6 Management Entity (ME) definitions . 35
5.1.7 U-plane service and interworking definitions . 35
5.1.8 ULE 1 device types definitions . 35
6 Profile specific requirements . 36
6.1 General . 36
6.2 Specific conventions. 36
6.2.1 Use of symbols in support status tables . 36
6.3 DECT ULE phase 1 device types . 36
6.3.1 Types of devices supported by the present document . 36
6.3.2 Specific procedures for specific device types . 37
6.4 Physical layer (PHL) requirements. 38
6.4.1 Physical layer (PHL) services . 38
6.4.2 Modulation schemes . 38
6.4.3 PHL service to procedure mapping . 38
6.5 MAC layer requirements . 39
6.5.1 MAC layer services . 39
6.5.2 MAC service to procedure mapping . 39
6.6 DLC layer . 43
6.6.1 DLC layer services. 43
6.6.2 DLC service to procedure mapping . 44
6.7 NWK layer . 45
6.7.1 General . 45
6.7.2 NWK features . 45
6.7.3 NWK features to procedures mapping . 46
6.8 Application Layer . 48
6.8.1 Application features . 48
6.8.2 Application features to procedures mapping. 48
6.9 Distributed communications . 48
6.10 Management Entity (ME) . 49
6.10.1 Management Entity (ME) services . 49
6.10.2 Management Entity (ME) mode to procedures mapping . 49
6.11 U-plane services and interworking requirements . 49
6.11.1 U-plane and interworking services . 49
6.11.2 U-plane and interworking service to procedure mapping . 49
7 Profile specific procedures description . 50
8 Physical Layer (PHL) procedures . 50
8.1 Supported Modulation types and schemes . 50
8.1.1 GFSK modulation . 50
8.1.2 Modulation scheme 1a . 50
8.2 Supported Physical Packets . 50
8.2.1 Physical Packet P32 . 50
8.2.2 Use of Physical Packet P32 . 50
8.2.3 Physical Packet P00 . 51
8.2.4 Transmission and use of Physical Packet P00 . 51
8.2.5 Reception of Physical Packet P00 . 51
8.3 General PHL procedures . 51
8.3.1 General radio requirements . 51
8.3.2 Radio receiver sensitivity . 51
8.3.3 Z-field . 51
8.3.4 Sliding collision detection . 51
8.3.5 Physical channel availability. 51
8.3.6 Synchronization window . 52
8.3.7 Minimum Normal Transmit Power (NTP) . 52
8.3.8 Power management . 52
8.3.9 Fast hopping radio . 52
9 Management Entity (ME) procedures . 52
ETSI

---------------------- Page: 4 ----------------------
5 ETSI TS 102 939-1 V1.2.1 (2015-03)
9.1 ULE phase 1 Management . 52
9.1.1 ULE phase 1 connection and resources management . 52
9.1.2 Stay alive procedure. 52
9.2 Channel selection and collision avoidance procedures. 53
9.2.1 Overall architecture of ULE channel selection processes . 53
9.2.2 Process M0 (RFP side pre-selection process) . 53
9.2.3 Broadcast mechanism . 53
9.2.4 Process M1 (PP side channel selection process) . 53
9.2.5 Setup attempt and evaluation of responses . 54
9.2.6 Process M2 (collision handling/collision avoidance process) . 54
10 MAC layer procedures . 54
10.1 General . 54
10.1.1 Frame and multiframe structure . 54
10.1.2 Bit mappings . 54
10.1.3 E/U mux modes and B-field identification (BA) bits . 55
10.1.3.0 General . 55
10.1.3.1 E/U mux modes and B-field identification (BA) bits for C/O bearers . 55
10.1.3.2 E/U mux modes and B-field identification (BA) bits for C/L (dummy) bearers . 55
10.1.4 Scrambling . 55
10.1.5 Error control. 55
10.1.6 RFP idle receiver scan sequence . 55
10.1.7 Identities . 56
10.2 Time multiplexers. 56
10.2.1 A-field Multiplexer . 56
10.2.1.1 Tail Multiplexer (T-MUX) . 56
10.2.1.2 A-tail identifications. 56
10.2.2 B-field control Multiplexer (E/U-MUX) . 56
10.2.2.1 B-field control Multiplexer (E/U-MUX), basic modes . 56
10.2.2.1.1 U-type Multiplexer for C/O bearers . 56
10.2.2.1.2 E-type Multiplexer "all MAC control" for C/O bearers . 56
10.2.2.1.3 E-type Multiplexer "no-B field" for C/O bearers . 56
10.2.2.1.4 E-type Multiplexer "all MAC control" for C/L (dummy) bearers . 57
10.2.2.1.5 E/U-Mux priority schema . 57
10.2.2.1.6 B-field identifications (basic) . 57
10.2.2.2 B-field control Multiplexer (E/U-MUX), C modes . 57
F
10.2.2.2.1 E-type Multiplexer, all modes (over C/O bearers) . 57
10.2.2.2.2 E/U-Mux priority schema . 58
10.2.2.2.3 B-field identifications (C ) . 58
F
10.3 Downlink broadcast (A-field). 58
10.3.0 General . 58
10.3.1 N messages . 58
T
10.3.2 Q messages . 58
T
10.3.2.1 QT - static system information . 58
10.3.2.2 Q - FP capabilities . 58
T
10.3.2.2.1 Standard FP Capabilities . 58
10.3.2.2.2 Extended FP Capabilities. 59
10.3.2.2.3 Extended FP Capabilities part 2 . 60
10.3.2.3 Q - SARI list contents . 60
T
10.3.2.4 Multiframe number (A-field) . 60
10.3.3 Reception of downlink broadcast (A-field) . 60
10.4 Paging broadcast . 61
10.4.0 General . 61
10.4.1 Paging message formats . 61
10.4.1.0 General . 61
10.4.1.1 Full page message format . 61
10.4.1.2 Short page message format . 61
10.4.1.3 Zero length page message format . 61
10.4.1.4 MAC layer information in zero and short length paging messages. 62
10.4.1.4.0 General . 62
10.4.1.4.1 RFP status . 62
10.4.2 MAC layer information messages procedures
...