ETSI EN 300 487 V2.2.1 (2024-12)
Satellite Earth Stations and Systems (SES); Receive-Only Mobile Earth Stations (ROMES) providing data communications operating in the 1,5 GHz frequency band; Harmonised Standard for access to radio spectrum
Satellite Earth Stations and Systems (SES); Receive-Only Mobile Earth Stations (ROMES) providing data communications operating in the 1,5 GHz frequency band; Harmonised Standard for access to radio spectrum
REN/SES-00412
Satelitske zemeljske postaje in sistemi (SES) - Sprejemne mobilne zemeljske postaje (ROMES), ki zagotavljajo podatkovne komunikacije in delujejo v frekvenčnem pasu 1,5 GHz - Harmonizirani standard za dostop do radijskega spektra
General Information
Buy Standard
Standards Content (Sample)
Draft ETSI EN 300 487 V2.2.0 (2024-09)
HARMONISED EUROPEAN STANDARD
Satellite Earth Stations and Systems (SES);
Receive-Only Mobile Earth Stations (ROMES) providing data
communications operating in the 1,5 GHz frequency band;
Harmonised Standard for access to radio spectrum
2 Draft ETSI EN 300 487 V2.2.0 (2024-09)
Reference
REN/SES-00412
Keywords
data, earth station, LMSS, MES, mobile, RO,
satellite
ETSI
650 Route des Lucioles
F-06921 Sophia Antipolis Cedex - FRANCE
Tel.: +33 4 92 94 42 00 Fax: +33 4 93 65 47 16
Siret N° 348 623 562 00017 - APE 7112B
Association à but non lucratif enregistrée à la
Sous-Préfecture de Grasse (06) N° w061004871
Important notice
The present document can be downloaded from the
ETSI Search & Browse Standards application.
The present document may be made available in electronic versions and/or in print. The content of any electronic and/or
print versions of the present document shall not be modified without the prior written authorization of ETSI. In case of any
existing or perceived difference in contents between such versions and/or in print, the prevailing version of an ETSI
deliverable is the one made publicly available in PDF format on ETSI deliver.
Users should be aware that the present document may be revised or have its status changed,
this information is available in the Milestones listing.
If you find errors in the present document, please send your comments to
the relevant service listed under Committee Support Staff.
If you find a security vulnerability in the present document, please report it through our
Coordinated Vulnerability Disclosure (CVD) program.
Notice of disclaimer & limitation of liability
The information provided in the present deliverable is directed solely to professionals who have the appropriate degree of
experience to understand and interpret its content in accordance with generally accepted engineering or
other professional standard and applicable regulations.
No recommendation as to products and services or vendors is made or should be implied.
In no event shall ETSI be held liable for loss of profits or any other incidental or consequential damages.
Any software contained in this deliverable is provided "AS IS" with no warranties, express or implied, including but not
limited to, the warranties of merchantability, fitness for a particular purpose and non-infringement of intellectual property
rights and ETSI shall not be held liable in any event for any damages whatsoever (including, without limitation, damages
for loss of profits, business interruption, loss of information, or any other pecuniary loss) arising out of or related to the use
of or inability to use the software.
Copyright Notification
No part may be reproduced or utilized in any form or by any means, electronic or mechanical, including photocopying and
microfilm except as authorized by written permission of ETSI.
The content of the PDF version shall not be modified without the written authorization of ETSI.
The copyright and the foregoing restriction extend to reproduction in all media.
© ETSI 2024.
All rights reserved.
ETSI
3 Draft ETSI EN 300 487 V2.2.0 (2024-09)
Contents
Intellectual Property Rights . 5
Foreword . 5
Modal verbs terminology . 6
Introduction . 6
1 Scope . 7
2 References . 7
2.1 Normative references . 7
2.2 Informative references . 7
3 Definition of terms, symbols and abbreviations . 8
3.1 Terms . 8
3.2 Symbols . 8
3.3 Abbreviations . 8
4 Test conditions . 8
4.1 Environment profile . 8
4.2 Test report . 9
4.3 Special Test Equipment (STE) . 9
4.4 Equipment Under Test (EUT) . 9
5 Receiver requirements . 9
5.1 Environmental conditions for testing . 9
5.2 Radiated emission requirements . 9
5.2.1 Purpose . 9
5.2.2 Specification . 9
5.2.3 Verification . 10
5.3 Receiver Adjacent Channel Selectivity requirements . 10
5.3.1 Purpose . 10
5.3.2 Technical requirements . 10
5.3.3 Conformance test . 10
5.4 Receiver Blocking Characteristics requirements . 11
5.4.1 Purpose . 11
5.4.2 Technical requirements . 11
5.4.3 Conformance test . 11
6 Method of Testing Receiver requirements . 11
6.1 Radiated emissions . 11
6.2 Receiver Adjacent Channel Selectivity . 11
6.2.1 General . 11
6.2.2 Test arrangement . 11
6.2.3 Test Procedures . 12
6.3 Receiver Blocking Characteristics . 12
6.3.1 General . 12
6.3.2 Test arrangement . 12
6.3.3 Test procedures . 12
Annex A (informative): Relationship between the present document and the essential
requirements of Directive 2014/53/EU . 14
Annex B (normative): RF emissions - test procedure . 15
B.1 Introduction . 15
B.2 Measuring apparatus. 15
B.3 Equipment Under Test (EUT) . 15
ETSI
4 Draft ETSI EN 300 487 V2.2.0 (2024-09)
B.4 Special Test Equipment (STE) . 15
B.5 Measurement procedure . 15
Annex C: Void . 18
Annex D (informative): Applicability of parameters given in ETSI EG 203 336 . 19
Annex E (informative): Maximum measurement uncertainty . 23
Annex F (informative): Bibliography . 24
Annex G (informative): Change history . 25
History . 26
ETSI
5 Draft ETSI EN 300 487 V2.2.0 (2024-09)
Intellectual Property Rights
Essential patents
IPRs essential or potentially essential to normative deliverables may have been declared to ETSI. The declarations
pertaining to these essential IPRs, if any, are publicly available for ETSI members and non-members, and can be
found in ETSI SR 000 314: "Intellectual Property Rights (IPRs); Essential, or potentially Essential, IPRs notified to
ETSI in respect of ETSI standards", which is available from the ETSI Secretariat. Latest updates are available on the
ETSI Web server (https://ipr.etsi.org/).
Pursuant to the ETSI Directives including the ETSI IPR Policy, no investigation regarding the essentiality of IPRs,
including IPR searches, has been carried out by ETSI. No guarantee can be given as to the existence of other IPRs not
referenced in ETSI SR 000 314 (or the updates on the ETSI Web server) which are, or may be, or may become,
essential to the present document.
Trademarks
The present document may include trademarks and/or tradenames which are asserted and/or registered by their owners.
ETSI claims no ownership of these except for any which are indicated as being the property of ETSI, and conveys no
right to use or reproduce any trademark and/or tradename. Mention of those trademarks in the present document does
not constitute an endorsement by ETSI of products, services or organizations associated with those trademarks.
DECT™, PLUGTESTS™, UMTS™ and the ETSI logo are trademarks of ETSI registered for the benefit of its
Members. 3GPP™ and LTE™ are trademarks of ETSI registered for the benefit of its Members and of the 3GPP
Organizational Partners. oneM2M™ logo is a trademark of ETSI registered for the benefit of its Members and of the ®
oneM2M Partners. GSM and the GSM logo are trademarks registered and owned by the GSM Association.
Foreword
This draft Harmonised European Standard (EN) has been produced by ETSI Technical Committee Satellite Earth
Stations and Systems (SES), and is now submitted for the combined Public Enquiry and Vote phase of the ETSI
Standardisation Request deliverable Approval Procedure.
The present document has been prepared under the Commission's standardisation request C(2015) 5376 final [i.1] to
provide one voluntary means of conforming to the essential requirements of Directive 2014/53/EU on the harmonisation
of the laws of the Member States relating to the making available on the market of radio equipment and repealing
Directive 1999/5/EC [i.2].
Once the present document is cited in the Official Journal of the European Union under that Directive, compliance with
the normative clauses of the present document given in table A.1 confers, within the limits of the scope of the present
document, a presumption of conformity with the corresponding essential requirements of that Dir
...
SLOVENSKI STANDARD
01-november-2024
Satelitske zemeljske postaje in sistemi (SES) - Sprejemne mobilne zemeljske
postaje (ROMES), ki zagotavljajo podatkovne komunikacije in delujejo v
frekvenčnem pasu 1,5 GHz - Harmonizirani standard za dostop do radijskega
spektra
Satellite Earth Stations and Systems (SES) - Receive-Only Mobile Earth Stations
(ROMES) providing data communications operating in the 1,5 GHz frequency band -
Harmonised Standard for access to radio spectrum
Ta slovenski standard je istoveten z: ETSI EN 300 487 V2.2.0 (2024-09)
ICS:
33.060.30 Radiorelejni in fiksni satelitski Radio relay and fixed satellite
komunikacijski sistemi communications systems
2003-01.Slovenski inštitut za standardizacijo. Razmnoževanje celote ali delov tega standarda ni dovoljeno.
Draft ETSI EN 300 487 V2.2.0 (2024-09)
HARMONISED EUROPEAN STANDARD
Satellite Earth Stations and Systems (SES);
Receive-Only Mobile Earth Stations (ROMES) providing data
communications operating in the 1,5 GHz frequency band;
Harmonised Standard for access to radio spectrum
2 Draft ETSI EN 300 487 V2.2.0 (2024-09)
Reference
REN/SES-00412
Keywords
data, earth station, LMSS, MES, mobile, RO,
satellite
ETSI
650 Route des Lucioles
F-06921 Sophia Antipolis Cedex - FRANCE
Tel.: +33 4 92 94 42 00 Fax: +33 4 93 65 47 16
Siret N° 348 623 562 00017 - APE 7112B
Association à but non lucratif enregistrée à la
Sous-Préfecture de Grasse (06) N° w061004871
Important notice
The present document can be downloaded from the
ETSI Search & Browse Standards application.
The present document may be made available in electronic versions and/or in print. The content of any electronic and/or
print versions of the present document shall not be modified without the prior written authorization of ETSI. In case of any
existing or perceived difference in contents between such versions and/or in print, the prevailing version of an ETSI
deliverable is the one made publicly available in PDF format on ETSI deliver.
Users should be aware that the present document may be revised or have its status changed,
this information is available in the Milestones listing.
If you find errors in the present document, please send your comments to
the relevant service listed under Committee Support Staff.
If you find a security vulnerability in the present document, please report it through our
Coordinated Vulnerability Disclosure (CVD) program.
Notice of disclaimer & limitation of liability
The information provided in the present deliverable is directed solely to professionals who have the appropriate degree of
experience to understand and interpret its content in accordance with generally accepted engineering or
other professional standard and applicable regulations.
No recommendation as to products and services or vendors is made or should be implied.
In no event shall ETSI be held liable for loss of profits or any other incidental or consequential damages.
Any software contained in this deliverable is provided "AS IS" with no warranties, express or implied, including but not
limited to, the warranties of merchantability, fitness for a particular purpose and non-infringement of intellectual property
rights and ETSI shall not be held liable in any event for any damages whatsoever (including, without limitation, damages
for loss of profits, business interruption, loss of information, or any other pecuniary loss) arising out of or related to the use
of or inability to use the software.
Copyright Notification
No part may be reproduced or utilized in any form or by any means, electronic or mechanical, including photocopying and
microfilm except as authorized by written permission of ETSI.
The content of the PDF version shall not be modified without the written authorization of ETSI.
The copyright and the foregoing restriction extend to reproduction in all media.
© ETSI 2024.
All rights reserved.
ETSI
3 Draft ETSI EN 300 487 V2.2.0 (2024-09)
Contents
Intellectual Property Rights . 5
Foreword . 5
Modal verbs terminology . 6
Introduction . 6
1 Scope . 7
2 References . 7
2.1 Normative references . 7
2.2 Informative references . 7
3 Definition of terms, symbols and abbreviations . 8
3.1 Terms . 8
3.2 Symbols . 8
3.3 Abbreviations . 8
4 Test conditions . 8
4.1 Environment profile . 8
4.2 Test report . 9
4.3 Special Test Equipment (STE) . 9
4.4 Equipment Under Test (EUT) . 9
5 Receiver requirements . 9
5.1 Environmental conditions for testing . 9
5.2 Radiated emission requirements . 9
5.2.1 Purpose . 9
5.2.2 Specification . 9
5.2.3 Verification . 10
5.3 Receiver Adjacent Channel Selectivity requirements . 10
5.3.1 Purpose . 10
5.3.2 Technical requirements . 10
5.3.3 Conformance test . 10
5.4 Receiver Blocking Characteristics requirements . 11
5.4.1 Purpose . 11
5.4.2 Technical requirements . 11
5.4.3 Conformance test . 11
6 Method of Testing Receiver requirements . 11
6.1 Radiated emissions . 11
6.2 Receiver Adjacent Channel Selectivity . 11
6.2.1 General . 11
6.2.2 Test arrangement . 11
6.2.3 Test Procedures . 12
6.3 Receiver Blocking Characteristics . 12
6.3.1 General . 12
6.3.2 Test arrangement . 12
6.3.3 Test procedures . 12
Annex A (informative): Relationship between the present document and the essential
requirements of Directive 2014/53/EU . 14
Annex B (normative): RF emissions - test procedure . 15
B.1 Introduction . 15
B.2 Measuring apparatus. 15
B.3 Equipment Under Test (EUT) . 15
ETSI
4 Draft ETSI EN 300 487 V2.2.0 (2024-09)
B.4 Special Test Equipment (STE) . 15
B.5 Measurement procedure . 15
Annex C: Void . 18
Annex D (informative): Applicability of parameters given in ETSI EG 203 336 . 19
Annex E (informative): Maximum measurement uncertainty . 23
Annex F (informative): Bibliography . 24
Annex G (informative): Change history . 25
History . 26
ETSI
5 Draft ETSI EN 300 487 V2.2.0 (2024-09)
Intellectual Property Rights
Essential patents
IPRs essential or potentially essential to normative deliverables may have been declared to ETSI. The declarations
pertaining to these essential IPRs, if any, are publicly available for ETSI members and non-members, and can be
found in ETSI SR 000 314: "Intellectual Property Rights (IPRs); Essential, or potentially Essential, IPRs notified to
ETSI in respect of ETSI standards", which is available from the ETSI Secretariat. Latest updates are available on the
ETSI Web server (https://ipr.etsi.org/).
Pursuant to the ETSI Directives including the ETSI IPR Policy, no investigation regarding the essentiality of IPRs,
including IPR searches, has been carried out by ETSI. No guarantee can be given as to the existence of other IPRs not
referenced in ETSI SR 000 314 (or the updates on the ETSI Web server) which are, or may be, or may become,
essential to the present document.
Trademarks
The present document may include trademarks and/or tradenames which are asserted and/or registered by their owners.
ETSI claims no ownership of these except for any which are indicated as being the property of ETSI, and conveys no
right to use or reproduce any trademark and/or tradename. Mention of those trademarks in the present document does
not constitute an endorsement by ETSI of products, services or organizations associated with those trademarks.
DECT™, PLUGTESTS™, UMTS™ and the ETSI logo are trademarks of ETSI registered for the benefit of its
Members. 3GPP™ and LTE™ are trademarks of ETSI registered for the benefit of its Members and of the 3GPP
Organizational Partners. oneM2M™ logo is a tradem
...
Questions, Comments and Discussion
Ask us and Technical Secretary will try to provide an answer. You can facilitate discussion about the standard in here.