ETSI TS 102 256 V1.1.1 (2003-08)

Private Integrated Services Network (PISN); Specification, functional model and information flows; Make Call Request supplementary service

DTS/ECMA-00231

Zasebno omrežje z integriranimi storitvami (PISN) - Specifikacija, funkcijski model in informacijski pretoki - Dopolnilna storitev: tvorba zahteve za zvezo

General Information

• Status: Published
• Publication Date: 25-Aug-2003
• Technical Committee: Ecma - Standardizing information and communications systems
• Current Stage: 12 - Completion
• Due Date: 29-Jul-2003
• Completion Date: 26-Aug-2003
• Ref Project: SIST-TS ETSI/TS 102 256 V1.1.1:2005 - Private Integrated Services Network (PISN); Specification, functional model and information flows; Make Call Request supplementary service

Standards Content (Sample)

SLOVENSKI STANDARD
SIST-TS ETSI/TS 102 256 V1.1.1:2005
01-marec-2005
Zasebno omrežje z integriranimi storitvami (PISN) - Specifikacija, funkcijski model
in informacijski pretoki - Dopolnilna storitev: tvorba zahteve za zvezo
Private Integrated Services Network (PISN); Specification, functional model and
information flows; Make Call Request supplementary service
Ta slovenski standard je istoveten z: TS 102 256 Version 1.1.1
ICS:
33.040.35 Telefonska omrežja Telephone networks
SIST-TS ETSI/TS 102 256 V1.1.1:2005 en
2003-01.Slovenski inštitut za standardizacijo. Razmnoževanje celote ali delov tega standarda ni dovoljeno.

---------------------- Page: 1 ----------------------

SIST-TS ETSI/TS 102 256 V1.1.1:2005

---------------------- Page: 2 ----------------------

SIST-TS ETSI/TS 102 256 V1.1.1:2005

ETSI TS 102 256 V1.1.1 (2003-08)
Technical Specification


Private Integrated Services Network (PISN);
Specification, functional model and information flows;
Make Call Request supplementary service

---------------------- Page: 3 ----------------------

SIST-TS ETSI/TS 102 256 V1.1.1:2005
 2 ETSI TS 102 256 V1.1.1 (2003-08)



Reference
DTS/ECMA-00231
Keywords
PISN, stage 1, stage 2, supplementary service
ETSI
650 Route des Lucioles
F-06921 Sophia Antipolis Cedex - FRANCE

Tel.: [phone]  Fax: [phone]

Siret N° 348 623 562 00017 - NAF 742 C
Association à but non lucratif enregistrée à la
Sous-Préfecture de Grasse (06) N° 7803/88

Important notice
Individual copies of the present document can be downloaded from:
http://www.etsi.org
The present document may be made available in more than one electronic version or in print. In any case of existing or
perceived difference in contents between such versions, the reference version is the Portable Document Format (PDF).
In case of dispute, the reference shall be the printing on ETSI printers of the PDF version kept on a specific network drive
within ETSI Secretariat.
Users of the present document should be aware that the document may be subject to revision or change of status.
Information on the current status of this and other ETSI documents is available at
http://portal.etsi.org/tb/status/status.asp
If you find errors in the present document, send your comment to:
[e-mail]
Copyright Notification
No part may be reproduced except as authorized by written permission.
The copyright and the foregoing restriction extend to reproduction in all media.

© European Telecommunications Standards Institute 2003.
All rights reserved.

TM TM TM
DECT , PLUGTESTS and UMTS are Trade Marks of ETSI registered for the benefit of its Members.
TM
TIPHON and the TIPHON logo are Trade Marks currently being registered by ETSI for the benefit of its Members.
TM
3GPP is a Trade Mark of ETSI registered for the benefit of its Members and of the 3GPP Organizational Partners.
ETSI

---------------------- Page: 4 ----------------------

SIST-TS ETSI/TS 102 256 V1.1.1:2005
 3 ETSI TS 102 256 V1.1.1 (2003-08)
Contents
Intellectual Property Rights.5
Foreword.5
Brief History.5
1 Scope.6
2 Conformance.6
3 References (normative).6
4 Definitions.7
4.1 External definitions.7
4.2 Other definitions.7
4.2.1 Co-operating User.7
4.2.2 Destination User.7
4.2.3 Make Call Request.7
4.2.4 Original Call.7
4.2.5 Requested Call.7
4.2.6 Requesting User.8
5 List of acronyms.8
6 SS-MCR stage 1 specification.9
6.1 Description.9
6.1.1 General description.9
6.1.2 Qualifications on applicability to telecommunication services.9
6.2 Procedures.9
6.2.1 Provision / withdrawal.9
6.2.2 Normal procedures.9
6.2.2.1 Activation, deactivation and interrogation .9
6.2.2.2 Invocation and operation.9
6.2.3 Exceptional procedures.10
6.2.3.1 Activation, deactivation and interrogation .10
6.2.3.2 Invocation and operation.10
6.3 Interactions with other Supplementary Services / Additional Network Features.10
6.3.1 Calling Line Identification Presentation (SS-CLIP) .10
6.3.2 Connected Line Identification Presentation (SS-COLP) .10
6.3.3 Calling/Connected Line Identification Restriction (SS-CLIR).10
6.3.4 Calling Name Identification Presentation (SS-CNIP).10
6.3.5 Calling/Connected Name Identification Restriction (SS-CNIR) .10
6.3.6 Connected Name Identification Presentation (SS-CONP).11
6.3.7 Call Forwarding Unconditional (SS-CFU) .11
6.3.8 Call Forwarding Busy (SS-CFB).11
6.3.9 Call Forwarding No Reply (SS-CFNR).11
6.3.10 Call Deflection (SS-CD).11
6.3.11 Path Replacement (ANF-PR).11
6.3.12 Call Transfer (SS-CT).11
6.3.13 Completion of Calls to Busy Subscribers (SS-CCBS).11
6.3.14 Completion of Calls on No Reply (SS-CCNR).11
6.3.15 Call Offer (SS-CO) .11
6.3.16 Do Not Disturb (SS-DND) .12
6.3.17 Do Not Disturb Override (SS-DNDO).12
6.3.18 Call Intrusion (SS-CI).12
6.3.19 Advice of Charge (SS-AOC) .12
6.3.20 Recall (SS-RE).12
6.3.21 Call Interception (SS-CINT).12
6.3.22 Transit Counter (ANF-TC) .12
6.3.23 Route Restriction Class (ANF-RRC).12
ETSI

---------------------- Page: 5 ----------------------

SIST-TS ETSI/TS 102 256 V1.1.1:2005
 4 ETSI TS 102 256 V1.1.1 (2003-08)
6.3.24 Message Waiting Indication (SS-MWI) .12
6.3.25 Wireless Terminal Location Registration (SS-WTLR).12
6.3.26 Wireless Terminal Incoming Call (SS-WTMI).12
6.3.27 Wireless Terminal Outgoing Call (SS-WTMO) .12
6.3.28 Wireless Terminal Authentication of a WTM User (SS-WTAT) .12
6.3.29 Wireless Terminal Authentication of the PISN (SS-WTAN) .13
6.3.30 Common Information (SS-CMN).13
6.3.31 Call Priority Interruption (Protection) (SS-CPI(P)) .13
6.3.32 Private User Mobility Incoming Call (ANF-PUMI).13
6.3.33 Private User Mobility Outgoing Call (ANF-PUMO).13
6.3.34 Private User Mobility Registration (SS-PUMR).13
6.3.35 Single Step Call Transfer (SS-SSCT) .13
6.3.36 Simple Dialog (SS-SD).13
6.3.37 Call Identification and Call Linkage (ANF-CIDL).13
6.3.38 Short Message Service (SS-SMS) .13
6.3.39 Message Centre Monitoring (SS-MCM).13
6.3.40 Mailbox Identification (SS-MID) .13
6.4 Interworking considerations.13
6.5 Overall SDL.14
7 SS-MCR stage 2 specification.16
7.1 Functional model.16
7.1.1 Functional model description.16
7.1.2 Description of Functional Entities .16
7.1.2.1 Requesting User's User Agent, FE1 .16
7.1.2.2 Requesting User's Control entity, FE2 .17
7.1.2.3 Co-operating User's Control entity, FE3 .17
7.1.2.4 Co-operating User's User Agent, FE4 .17
7.1.2.5 Destination User's Control entity, FE5.17
7.1.2.6 Destination User's User Agent, FE6.17
7.2 Information flows.18
7.2.1 Definition of information flows.18
7.2.1.1 MCR_CallRequest.18
7.2.1.2 MCR_PromptCoop.18
7.2.1.3 MCR_Inform.19
7.2.1.4 MCR_Alerting.19
7.2.2 Relationship of information flows to Basic Call information flows .19
7.2.3 Information flow sequences.19
7.2.3.1 Make Call Request procedures of SS-MCR.20
7.3 Functional Entity actions.20
7.3.1 Functional Entity actions of FE1 .20
7.3.2 Functional Entity actions of FE2 .20
7.3.3 Functional Entity actions of FE3 .21
7.3.4 Functional Entity actions of FE4 .21
7.3.5 Functional Entity actions of FE5 .21
7.3.6 Functional Entity actions of FE6 .21
7.4 Functional Entity behaviour .21
7.4.1 Behaviour of FE1.22
7.4.2 Behaviour of FE2.23
7.4.3 Behaviour of FE3.24
7.4.4 Behaviour of FE4.25
7.4.5 Behaviour of FE5.25
7.4.6 Behaviour of FE6.26
7.5 Allocation of Functional Entities to physical equipment.26
7.6 Interworking considerations.27
History .28

ETSI

---------------------- Page: 6 ----------------------

SIST-TS ETSI/TS 102 256 V1.1.1:2005
 5 ETSI TS 102 256 V1.1.1 (2003-08)
Intellectual Property Rights
IPRs essential or potentially essential to the present document may have been declared to ETSI. The information
pertaining to these essential IPRs, if any, is publicly available for ETSI members and non-members, and can be found
in ETSI SR 000 314: "Intellectual Property Rights (IPRs); Essential, or potentially Essential, IPRs notified to ETSI in
respect of ETSI standards", which is available from the ETSI Secretariat. Latest updates are available on the ETSI Web
server (http://webapp.etsi.org/IPR/home.asp).
Pursuant to the ETSI IPR Policy, no investigation, including IPR searches, has been carried out by ETSI. No guarantee
can be given as to the existence of other IPRs not referenced in ETSI SR 000 314 (or the updates on the ETSI Web
server) which are, or may be, or may become, essential to the present document.
Foreword
This Technical Specification (TS) has been produced by ECMA on behalf of its members and those of the European
Telecommunications Standards Institute (ETSI).
Brief History
The present document is one of a series of ECMA Standards defining services and signalling protocols applicable to
Private Integrated Services Networks (PISNs). The series uses ISDN concepts as developed by ITU-T and conforms to
the framework of International Standards for Open Systems Interconnection as defined by ISO/IEC. It has been
produced under ETSI work item DTS/ECMA-00231.
The present document specifies the Make Call Request supplementary service.
The present document is based upon the practical experience of ECMA member companies and the results of their
active and continuous participation in the work of ISO/IEC JTC1, ITU-T, ETSI and other international and national
standardization bodies. It represents a pragmatic and widely based consensus.
ETSI

---------------------- Page: 7 ----------------------

SIST-TS ETSI/TS 102 256 V1.1.1:2005
 6 ETSI TS 102 256 V1.1.1 (2003-08)
1 Scope
The present document specifies Supplementary Service Make Call Request (SS-MCR), which is related, but not limited,
to various basic services supported by Private Integrated Services Networks (PISNs). Basic services are specified in
ECMA-142 [2].
The supplementary service MCR enables a Requesting User to request a Co-operating User to establish a new
Requested Call to a Destination User. This new Requested Call between the Co-operating and Destination User can be
either a Basic call or call independent signalling connection.
Service specifications are produced in three stages, according to the method described in ETS 300 387 [4]. The present
document contains the stage 1 and stage 2 specifications of SS-MCR. The stage 1 specification (clause 6) specifies the
supplementary service as seen by users of PISNs. The stage 2 specification (clause 7) specifies the functional entities
involved in the supplementary service and the information flows between them.
2 Conformance
In order to conform to the present document, a stage 3 standard shall specify signalling protocols and equipment
behaviour that are capable of being used in a PISN which supports the supplementary service specified in the present
document. This means that, to claim conformance, a stage 3 standard is required to be adequate for the support of those
aspects of clause 6 (stage 1) and clause 7 (stage 2) which are relevant to the interface or equipment to which the stage 3
standard applies.
3 References (normative)
The following standards contain provisions, which, through reference in this text, constitute provisions of the present
document. All standards are subject to revision, and parties to agreements based on the present document are
encouraged to investigate the possibility of applying the most recent editions of the standards indicated below.
In the case of references to ECMA Standards that are aligned with ISO/IEC International Standards, the number of the
appropriate ISO/IEC International Standard is given in brackets after the ECMA reference.
[1] ECMA-133: "Private Integrated Services Network (PISN) - Reference Configuration for PISN
Exchanges (PINX) (International Standard ISO/IEC 11579-1)".
[2] ECMA-142: "Private Integrated Services Network (PISN) - Circuit Mode 64kbit/s Bearer
Services - Service Description, Functional Capabilities and Information Flows (BCSD)
(International Standard ISO/IEC 11574)".
[3] ECMA-165: "Private Integrated Services Network (PISN) - Generic Functional Protocol for the
Support of Supplementary Services - Inter-Exchange Signalling Procedures and Protocol
(QSIG-GF) (International Standard ISO/IEC 11582)".
[4] ETSI ETS 300 387: "Private Telecommunication Network (PTN); Method for the specification of
basic and supplementary services".
[5] ITU-T Recommendation I.112: "Vocabulary of terms for ISDNs".
[6] ITU-T Recommendation I.210: "Principles of telecommunication services supported by an ISDN
and the means to describe them".
[7] ITU-T Recommendation Z.100: "Specification and Description Language (SDL)".
ETSI

---------------------- Page: 8 ----------------------

SIST-TS ETSI/TS 102 256 V1.1.1:2005
 7 ETSI TS 102 256 V1.1.1 (2003-08)
4 Definitions
For the purposes of the present document, the following terms and definitions apply.
4.1 External definitions
For the purposes of the present document the following terms and definitions given in other documents apply:
basic service: See ECMA-142 [2].
call, basic call: See ECMA-165 [3].
Call Independent Signalling Connection (CISC): See ECMA-165 [3].
call independent: See ECMA-165 [3].
call related: See ECMA-165 [3].
Private Integrated services Network eXchange (PINX): See ECMA-133 [1].
Private Integrated Services Network (PISN): See ECMA-133 [1].
service: See ITU-T Recommendation I.112 [5].
signalling: See ITU-T Recommendation I.112 [5].
Supplementary Service (SS): See ITU-T Recommendation I.210 [6].
user: See ECMA-142 [2].
4.2 Other definitions
4.2.1 Co-operating User
The user who receives a Make Call Request and who shall set up a new Requested Call to the Destination User.
4.2.2 Destination User
The called user of the Requested Call i.e. the user to whom the Co-operating User shall establish a Requested Call.
4.2.3 Make Call Request
A request from the Requesting User for a new call (i.e. Requested Call) between a Co-operating User and a Destination
User.
4.2.4 Original Call
The call between the Requesting User and the Co-operating User. The Original Call can be either a Basic call or a call
independent signalling connection and is correlated with the Requested Call.
4.2.5 Requested Call
The call between the Co-operating User and the Destination User that is established by the Co-operating User due to a
Make Call Request from the Requesting User. The Requested Call can either be a Basic call (with a specific Basic
Service) or a call independent signalling connection and is correlated with the Original Call.
ETSI

---------------------- Page: 9 ----------------------

SIST-TS ETSI/TS 102 256 V1.1.1:2005
 8 ETSI TS 102 256 V1.1.1 (2003-08)
4.2.6 Requesting User
The User who sends a Make Call Request to the Co-operating User with the request to establish a specific Requested
Call to the Destination User.
5 List of acronyms
For the purposes of the present document the following acronyms apply:
ANF Additional Network Feature
ANF-PR Path Replacement
ANF-PUMI Private User Mobility Incoming Call
ANF-PUMO Private User Mobility Outgoing Call
ANF-RRC Route Restriction Class
ANF-TC Transit Counter
CISC Call Independent Signalling Connection
FE Functional Entity
ISDN Integrated Services Digital Network
MC Message Centre
MCR Make Call Request
PINX Private Integrated services Network eXchange
PISN Private Integrated Services Network
SDL Specification and Description Language
SS Supplementary Service
SS-AOC Advice of Charge
SS-CCBS Completion of Calls to Busy Subscribers
SS-CCNR Completion of Calls on No Reply
SS-CD Call Deflection
SS-CFB Call Forwarding Busy
SS-CFNR Call Forwarding No Reply
SS-CFU Call Forwarding Unconditional
SS-CI Call Intrusion
SS-CINT Call INTerception
SS-CLIP Calling Line Identification Presentation
SS-CLIR Calling/Connected Line Identification Restriction
SS-CMN Common Information
SS-CNIP Calling Name Identification Presentation
SS-CNIR Calling/Connected Name Identification Restriction
SS-CO Call Offer
SS-COLP Connected Line Identification Presentation
SS-CONP Connected Name Identification Presentation
SS-CPI(P) Call Priority Interruption (Protection)
SS-CT Call Transfer
SS-DND Do Not Disturb
SS-DNDO Do Not Disturb Override
SS-MCM Message Centre Monitoring
SS-MID Mailbox Identification
SS-MWI Message Waiting Indication
SS-PUMR Private User Mobility Registration
SS-RE REcall
SS-SD Simple Dialog
SS-SMS Short Message Service
SS-SSCT Single Step Call Transfer
SS-WTAN Wireless Terminal Authentication of the PISN
SS-WTAT Wireless Terminal Authentication of a WTM User
SS-WTLR Wireless Terminal Location Registration
SS-WTMI Wireless Terminal Incoming Call
SS-WTMO Wireless Terminal Outgoing Call
ETSI

---------------------- Page: 10 ----------------------

SIST-TS ETSI/TS 102 256 V1.1.1:2005
 9 ETSI TS 102 256 V1.1.1 (2003-08)
6 SS-MCR stage 1 specification
6.1 Description
6.1.1 General description
The supplementary service MCR enables a Requesting User to request a Co-operating User to establish a new
Requested Call to a Destination User. This new Requested Call between the Co-operating User and the Destination
User can either be a Basic call or a call independent signalling connection. The new Requested Call shall be correlated
to the Original Call between the Requesting User and the Co-operating User.
6.1.2 Qualifications on applicability to telecommunication services
This supplementary service is applicable to all basic telecommunication services.
6.2 Procedures
6.2.1 Provision / withdrawal
SS-MCR may be provided or withdrawn after pre-arrangement with the service provider or may be generally available
to all users.
6.2.2 Normal procedures
6.2.2.1 Activation, deactivation and interrogation
Not appli
...