ETSI EN 300 910 V8.5.1 (2000-11)
Digital cellular telecommunications system (Phase 2+) (GSM); Radio transmission and reception (GSM 05.05 version 8.5.1 Release 1999)
Digital cellular telecommunications system (Phase 2+) (GSM); Radio transmission and reception (GSM 05.05 version 8.5.1 Release 1999)
REN/SMG-020505Q8R2
Digitalni celični telekomunikacijski sistem (faza 2+) – Radijsko oddajanje in sprejemanje (GSM 05.05, različica 8.5.1, izdaja 1999)
General Information
Standards Content (Sample)
2003-01.Slovenski inštitut za standardizacijo. Razmnoževanje celote ali delov tega standarda ni dovoljeno.Digital cellular telecommunications system (Phase 2+) (GSM); Radio transmission and reception (GSM 05.05 version 8.5.1 Release 1999)33.070.50Globalni sistem za mobilno telekomunikacijo (GSM)Global System for Mobile Communication (GSM)ICS:Ta slovenski standard je istoveten z:EN 300 910 Version 8.5.1SIST EN 300 910 V8.5.1:2003en01-december-2003SIST EN 300 910 V8.5.1:2003SLOVENSKI
STANDARD
SIST EN 300 910 V8.5.1:2003
ETSI EN 300 910 V8.5.1 (2000-11)European Standard (Telecommunications series) Digital cellular telecommunications system (Phase 2+);Radio transmission and reception(GSM 05.05 version 8.5.1 Release 1999)GLOBAL SYSTEM
FOR MOBILE COMMUNICATIONSR
SIST EN 300 910 V8.5.1:2003
ETSI ETSI EN 300 910 V8.5.1 (2000-11)2(GSM 05.05 version 8.5.1 Release 1999)
Reference REN/SMG-020505Q8R2 Keywords Digital cellular telecommunications system, Global System for Mobile communications (GSM) ETSI 650 Route des Lucioles F-06921 Sophia Antipolis Cedex - FRANCE
Tel.: +33 4 92 94 42 00
Fax: +33 4 93 65 47 16
Siret N° 348 623 562 00017 - NAF 742 C Association à but non lucratif enregistrée à la Sous-Préfecture de Grasse (06) N° 7803/88
Important notice Individual copies of the present document can be downloaded from: http://www.etsi.org The present document may be made available in more than one electronic version or in print. In any case of existing or perceived difference in contents between such versions, the reference version is the Portable Document Format (PDF). In case of dispute, the reference shall be the printing on ETSI printers of the PDF version kept on a specific network drive within ETSI Secretariat. Users of the present document should be aware that the document may be subject to revision or change of status. Information on the current status of this and other ETSI documents is available at http://www.etsi.org/tb/status/ If you find errors in the present document, send your comment to: editor@etsi.fr Copyright Notification No part may be reproduced except as authorized by written permission. The copyright and the foregoing restriction extend to reproduction in all media.
© European Telecommunications Standards Institute 2000. All rights reserved.
SIST EN 300 910 V8.5.1:2003
ETSI ETSI EN 300 910 V8.5.1 (2000-11)3(GSM 05.05 version 8.5.1 Release 1999)Contents Intellectual Property Rights.6 Foreword.6 1 Scope.7 1.1 References.7 1.2 Abbreviations.8 2 Frequency bands and channel arrangement.9 3 Reference configuration.10 4 Transmitter characteristics.10 4.1 Output power.11 4.1.1 Mobile Station.11 4.1.2 Base station.14 4.1.2.1 Additional requirements for PCS 1 900 and MXM 1900 Base stations.14 4.1.2.2 Additional requirements for GSM 850 and MXM 850 Base stations.15 4.2 Output RF spectrum.15 4.2.1 Spectrum due to the modulation and wide band noise.15 4.2.2 Spectrum due to switching transients.19 4.3 Spurious emissions.20 4.3.1 Principle of the specification.21 4.3.2 Base Transceiver Station.21 4.3.2.1 General requirements.21 4.3.2.2 Additional requirements for co-existence with 3 G.22 4.3.3 Mobile Station.23 4.3.3.1 Mobile Station GSM 400, GSM 900 and DCS 1 800.23 4.3.3.2 Mobile Station GSM 850 and PCS 1 900.24 4.4 Radio frequency tolerance.24 4.5 Output level dynamic operation.24 4.5.1 Base Transceiver Station.25 4.5.2 Mobile Station.25 4.6 Modulation accuracy.25 4.6.1 GMSK modulation.25 4.6.2 8-PSK modulation.26 4.6.2.1 RMS EVM.26 4.6.2.2 Origin Offset Suppression.26 4.6.2.3 Peak EVM.26 4.6.2.4 95:th percentile.27 4.7 Intermodulation attenuation.27 4.7.1 Base transceiver station.27 4.7.2 Intra BTS intermodulation attenuation.27 4.7.2.1 GSM 400, GSM 900, DCS 1800.27 4.7.2.2 MXM 850 and MXM 1900.27 4.7.2.3 GSM 850 and PCS 1900.28 4.7.3 Intermodulation between MS (DCS 1 800 & PCS 1 900 only).28 4.7.4 Mobile PBX (GSM 900 only).28 5 Receiver characteristics.28 5.1 Blocking characteristics.28 5.2 AM suppression characteristics.31 5.3 Intermodulation characteristics.32 5.4 Spurious emissions.32 6 Transmitter/receiver performance.32 6.1 Nominal Error Rates (NER).33 6.1.1 GMSK modulation.33 6.1.2 8-PSK modulation.33 6.2 Reference sensitivity level.34 SIST EN 300 910 V8.5.1:2003
ETSI ETSI EN 300 910 V8.5.1 (2000-11)4(GSM 05.05 version 8.5.1 Release 1999)6.3 Reference interference level.37 6.4 Erroneous frame indication performance.39 6.5 Random access and paging performance at high input levels.39 6.6 Frequency hopping performance under interference conditions.40 6.7 Incremental Redundancy Performance for EGPRS MS.40 Annex A (informative): Spectrum characteristics (spectrum due to the modulation).59 Annex B (normative): Transmitted power level versus time.65 Annex C (normative): Propagation conditions.68 C.1 Simple wideband propagation model.68 C.2 Doppler spectrum types.68 C.3 Propagation models.69 C.3.1 Typical case for rural area (RAx): (6 tap setting).69 C.3.2 Typical case for hilly terrain (HTx): (12 tap setting).69 C.3.3 Typical case for urban area (TUx): (12 tap setting).70 C.3.4 Profile for equalization test (EQx): (6 tap setting).70 C.3.5 Typical case for very small cells (TIx): (2 tap setting).70 Annex D (normative): Environmental conditions.71 D.1 General.71 D.2 Environmental requirements for the MSs.71 D.2.1 Temperature (GSM 400, GSM 900 and DCS 1 800).71 D.2.1.1 Environmental Conditions (PCS 1 900 and GSM 850).71 D.2.2 Voltage.71 D.2.3 Vibration (GSM 400, GSM 900 and DCS 1 800).72 D.2.3.1 Vibration (PCS 1 900 and GSM 850).72 D.3 Environmental requirements for the BSS equipment.72 D.3.1 Environmental requirements for the BSS equipment.73 Annex E (normative): Repeater characteristics (GSM 400, GSM GSM 900 and DCS 1800).74 E.1 Introduction.74 E.2 Spurious emissions.74 E.3 Intermodulation products.75 E.4 Out of band gain.75 E.5 Frequency error and modulation accuracy.75 E.5.1 Frequency error.75 E.5.2 Modulation accuracy at GMSK modulation.76 E.5.3 Modulation accuracy at 8-PSK modulation.76 Annex F (normative): Antenna Feeder Loss Compensator Characteristics (GSM 400, GSM 900 and DCS 1800).77 F.1 Introduction.77 F.2 Transmitting path.77 F.2.1 Maximum output power.78 F.2.2 Gain.78 F.2.3 Burst transmission characteristics.78 F.2.4 Phase error.79 F.2.5 Frequency error.79 F.2.6 Group delay.79 F.2.7 Spurious emissions.79 F.2.8 VSWR.80 F.2.9 Stability.80 SIST EN 300 910 V8.5.1:2003
ETSI ETSI EN 300 910 V8.5.1 (2000-11)5(GSM 05.05 version 8.5.1 Release 1999)F.3 Receiving path.80 F.3.1 Gain.80 F.3.2 Noise figure.80 F.3.3 Group delay.81 F.3.4 Intermodulation performance.81 F.3.5 VSWR.81 F.3.6 Stability.81 F.4 Guidelines (informative).81 Annex G (normative): Calculation of Error Vector Magnitude.82 Annex H (normative): Requirements on Location Measurement Unit.84 H.1 TOA LMU Requirements.84 H.1.1 Void.84 H.1.2 LMU characteristics.84 H.1.2.1 Blocking characteristics.84 H.1.2.2 AM suppression characteristics.84 H.1.2.3 Intermodulation characteristics.85 H.1.2.4 Spurious emissions.85 H.1.3 Time-of-Arrival Measurement Performance.85 H.1.3.1 Sensitivity Performance.85 H.1.3.2 Interference Performance.86 H.1.3.3 Multipath Performance.87 H.1.4 Radio Interface Timing Measurement Performance.87 H.2 E-OTD LMU Requirements.87 H.2.1 LMU Characteristics.88 H.2.1.1 Blocking characteristics.88 H.2.1.2 AM suppression characteristics.88 H.2.1.3 Intermodulation characteristics.88 H.2.2 Sensitivity and Interference Performance.88 H.2.2.1 Sensitivity Performance.88 H.2.2.2 Interference Performance.89 H.2.2.3 Multipath Performance.90 Annex I (normative): E-OTD Mobile Station Requirements.91 I.1 Introduction.91 I.2 Sensitivity and Interference Performance.91 I.2.1 Sensitivity Performance.91 I.2.2 Interference Performance.92 I.2.3 Multipath Performance.92 Annex L (informative): Change control history.93 History.95
SIST EN 300 910 V8.5.1:2003
ETSI ETSI EN 300 910 V8.5.1 (2000-11)6(GSM 05.05 version 8.5.1 Release 1999)Intellectual Property Rights IPRs essential or potentially essential to the present document may have been declared to ETSI. The information pertaining to these essential IPRs, if any, is publicly available for ETSI members and non-members, and can be found in ETSI SR 000 314: "Intellectual Property Rights (IPRs); Essential, or potentially Essential, IPRs notified to ETSI in respect of ETSI standards", which is available from the ETSI Secretariat. Latest updates are available on the ETSI Web server (http://www.etsi.org/ipr). Pursuant to the ETSI IPR Policy, no investigation, including IPR searches, has been carried out by ETSI. No guarantee can be given as to the existence of other IPRs not referenced in ETSI SR 000 314 (or the updates on the ETSI Web server) which are, or may be, or may become, essential to the present document. Foreword This European Standard (Telecommunications series) has been produced by ETSI Technical Committee Special Mobile Group (SMG). The present document defines the requirements for the transceiver of the digital mobile cellular and personal communication systems operating in the 900 MHz (P-GSM, E-GSM and R-GSM) and 1 800 MHz band (GSM 900 and DCS 1 800). It also includes specification information for mixed mode operation at 850 MHz and 1900 MHz. (MXM 850 and MXM 1900) 850 MHz and 1900 MHz mixed-mode is defined as a network that deploys both 30 kHz RF carriers and 200 kHz RF carriers in geographic regions where the Federal Communications Commission (FCC) regulations are applied. The contents of the present document may be subject to continuing work within SMG and may change following formal SMG approval. Should SMG modify the contents of the present document it will then be re-submitted for formal approval procedures by ETSI with an identifying change of release date and an increase in version number as follows: Version 8.x.y where: 8 GSM Phase 2+ Release 1999. x the second digit is incremented for changes of substance, i.e. technical enhancements, corrections, updates, etc. y the third digit is incremented when editorial only changes have been incorporated in the specification.
National transposition dates Date of adoption of this EN: 17 November 2000 Date of latest announcement of this EN (doa): 28 February 2001 Date of latest publication of new National Standard or endorsement of this EN (dop/e):
31 August 2001 Date of withdrawal of any conflicting National Standard (dow): 31 August 2001
SIST EN 300 910 V8.5.1:2003
ETSI ETSI EN 300 910 V8.5.1 (2000-11)7(GSM 05.05 version 8.5.1 Release 1999)1 Scope The present document defines the requirements for the transceiver of the pan-European digital cellular telecommunications systems GSM. Requirements are defined for two categories of parameters: - those that are required to provide compatibility between the radio channels, connected either to separate or common antennas, that are used in the system. This category also includes parameters providing compatibility with existing systems in the same or adjacent frequency bands; - those that define the transmission quality of the system. The present document defines RF characteristics for the Mobile Station (MS) and Base Station System (BSS). The BSS will contain either Base Transceiver Stations (BTS) or microcell base transceiver stations (micro-BTS). The precise measurement methods are specified in GSM 11.10 and GSM 11.21. Unless otherwise stated, the requirements defined in the present document apply to the full range of environmental conditions specified for the equipment (see annex D). The requirements for a MS in a mixed-mode system, MXM 850 and MXM 1900, corresponds to the requirements for GSM 850 MS and PCS 1900 MS respectively. In the present document some relaxation’s are introduced for GSM 400 MSs, GSM 900 MSs and GSM 850 MSs which fulfil the following conditions: - pertain to power class 4 or 5 (see clause 4.1.1); - not designed to be vehicle mounted (see GSM 02.06). In the present document these Mobile Stations are referred to as "small MS". NOTE: In the present document, a handheld which can be connected to a car kit is not considered to be vehicle mounted. MSs may operate on more than one of the frequency bands specified in clause 2. These MSs, defined in GSM 02.06, are referred to as "Multi band MSs" in the present document. Multi band MSs shall meet all requirements for each of the bands supported. The relaxation on GSM 400 MSs, GSM 900 MSs and GSM 850 MSs for a "small MS" are also valid for a multi band MS if it complies with the definition of a small MS. The RF characteristics of repeaters are defined in annex E of the present document. Annexes D and E are the only clauses of the present document applicable to repeaters. Annex E does not apply to the MS or BSS. 1.1 References The following documents contain provisions which, through reference in this text, constitute provisions of the present document. •References are either specific (identified by date of publication, edition number, version number, etc.) or non-specific. •For a specific reference, subsequent revisions do not apply. •For a non-specific reference, the latest version applies. •A non-specific reference to an ETS shall also be taken to refer to later versions published as an EN with the same number. •For this Release 1999 document, references to GSM documents are for Release 1999 versions (version 8.x.y). [1] GSM 01.04: "Digital cellular telecommunications system (Phase 2+); Abbreviations and acronyms". SIST EN 300 910 V8.5.1:2003
ETSI ETSI EN 300 910 V8.5.1 (2000-11)8(GSM 05.05 version 8.5.1 Release 1999)[2] GSM 02.06: "Digital cellular telecommunications system (Phase 2+); Types of Mobile Stations (MS)". [3] GSM 03.64: "Digital cellular telecommunications system (Phase 2+); General Packet Radio Service (GPRS); GPRS Radio Interface Stage 2". [3a] GSM 03.71: "Digital cellular telecommunication system (Phase 2+); Location Services; Functional description – Stage 2". [4] GSM 05.01: "Digi
...
Questions, Comments and Discussion
Ask us and Technical Secretary will try to provide an answer. You can facilitate discussion about the standard in here.